DTP cannot be changed or activated

We have transported a DTP process to the pre-prod envirnoment. When we attempt to make changes to the DTP we receive the following error first "Changes to Repository or cross-client Customizing are not permitted" and second error is "Data transfer process DTP_4CBJGH6DNBORCGW44A6Y7RL0T cannot be changed or activated"
The goal is to change the filter values within the DTP. We have all the appropriate and necessary  BI 7.0 authorization objects set.

SE06 --> System Change option --> Client Setting
Double click on the client (example 100)
Select "Changes without automatic Recording" under 'Changes and transports for client-specific objects' tab and
select "chnages to repository and cross-client customizing allowed" under 'Cross-client object changes'.
The above procedure OPEN the system for changes.
Once u r done with ur DTP changes, reset above setting back to original.

Similar Messages

  • Cannot make changes t oDTP - Source system does not exist

    Hi,
    I cannot open my DTP to make changes. when I tried to double click I got this error
    Source system X01CLNT001 does not exist
    Message no. RSAR203
    I have tried connection test from SM59 and there seems to be no problem.
    How do I resolve this?
    thanks

    Goto RSA1 --> Source System --> right click --> Check.
    Is it giving any error?
    You can click on restore also and check if anything improves.
    Also check whether datasource and transformation is active.
    Edited by: Pravender on May 28, 2010 12:11 PM

  • Exchange Connector 3.0 (Hotfix Release) Error - Error Message=The key value of an object cannot be changed.

    Hello,
    I am running Service Manager 2012 with the Exchange Connector 3.0 RTM (Re-release Version).  The issue I have is that when an e-mail is processed that is trying to update the status or event log of an incident, the Exchange Connector encounters an error
    and will not update the object.  The Operations Manager log denotes: 
    Exchange Connector: Unable to process mail item. Subject="Close Ticket: [IRXXXXX]", Error Message=The key value of an object cannot be changed.
    This will happen on a seemingly random selection of Incident work items.  I cannot correlate them with a specific template, exchange connector, or incident tier queue that could be causing the issue.  I can recreate the way a specific ticket
    was created and update it through e-mail without issue, and the next ticket can cause the error to trigger. 
    I have already opened a Microsoft Support Case using our Software Assurance agreement.  After a few months of troubleshooting the issue and trying different fixes, Microsoft support said they were unable to fix the problem and that we would need to
    purchase Premier support to go further. At this point I thought I would reach out to the community for ideas.
    The setup I have for the Exchange connectors is as follows.
    I have three separate Exchange connectors set up to three different mailboxes.  One Exchange connector processes external support tickets and applies a specific template.  Another processes client support tickets and applies a different template. 
    And the last Exchange connector processes internal tickets and also processes the updates of tickets created by the other two exchange connectors. 
    Here are the fixes I've attempted so far:
    1.  Changed the templates that each Exchange connector applies.
    2.  Changed the management pack that each template is stored in.
    3.  Checked my management pack(s) for extended classes by searching for Extension="true" (This was also checked by Microsoft support)
    4.  Deleted each Exchange connector and recreated each connector
    5.  Deleted each Exchange connector, deleted the management pack, and reinstalled the management pack and connectors
    6.  Repeated Step 5, deleted Microsoft.SystemCenter.ExchangeConnector.dll and Microsoft.SystemCenter.ExchangeConnector.resources.dll and then installed the Exchange connector Re-release version 3.0 Published 10/7/2013 (which is supposed to address this
    issue)
    7.  Deleted the HealthServiceState folder and restarted the Management Service
    I'm not really sure what to do at this point.  I've put many hours into customizing my installation to get it working for my organization so reformatting and starting from scratch would be a nightmare scenario.  This environment is in production.
    I do have a band-aid in place using Orchestrator.  Basically I have a monitor task searching for the error message and when it finds one it searches the mailbox for the offending e-mail and applies either the Resolve or Close status change that is requested
    from the user.  However, I do not have it working to update the ticket if a comment is applied to the incident.  If anyone is in this position and needs to know how to apply this Orchestrator task I am willing to provide my workflow.
    I am new to the community and am already impressed with the amount of help and effort there is in this forum.  I appreciate in advance any help that is provided and am open to any ideas at this point.  I can post more information as needed.
    Thank you,
    John

    Yes that is the whole template.  However, I did confirm that this is only happening to incidents where either of two situations triggers a runbook to fire and modify the incident.  When I remove the activity from the incident it does clear the
    issue.  For some background the first Runbook Activity set's the first response date when an incident is resolved if the first response value is null.  The second assigns the incident to a user upon creation if the title contains assignto:username;
    1.)
    <ObjectTemplate ID="Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
    <Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$">&lt;?xml version="1.0" encoding="utf-16"?&gt;
    &lt;ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"&gt;
    &lt;ParameterList&gt;
    &lt;RunbookParameterItem&gt;
    &lt;Name&gt;Get RA Guid&lt;/Name&gt;
    &lt;Id&gt;344b15effc1a44528e517c5b4227179c&lt;/Id&gt;
    &lt;Type&gt;String&lt;/Type&gt;
    &lt;Value&gt;Generic::Id&lt;/Value&gt;
    &lt;Direction&gt;In&lt;/Direction&gt;
    &lt;ContextInfo /&gt;
    &lt;/RunbookParameterItem&gt;
    &lt;/ParameterList&gt;
    &lt;RunbookId&gt;4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a&lt;/RunbookId&gt;
    &lt;/ParameterMapping&gt;</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1906</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Title$">Set First Response on Resolve</Property>
    </Object>
    </ObjectTemplate>
    2.)
    <ObjectTemplate ID="Template.b311e1f9126e4e19bbbbeb65ddb220ba" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Status$">$MPElement[Name='CustomSystem_WorkItem_Incident_Library!IncidentStatusEnum.Active']$</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
    <Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">ca88b13b-861a-4d39-a3cb-fd912d951e35</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.b311e1f9126e4e19bbbbeb65ddb220ba</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$">&lt;?xml version="1.0" encoding="utf-16"?&gt;
    &lt;ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"&gt;
    &lt;ParameterList&gt;
    &lt;RunbookParameterItem&gt;
    &lt;Name&gt;RA Activity GUID&lt;/Name&gt;
    &lt;Id&gt;5677d117a0294a2c898a695032f26c72&lt;/Id&gt;
    &lt;Type&gt;String&lt;/Type&gt;
    &lt;Value&gt;Generic::Id&lt;/Value&gt;
    &lt;Direction&gt;In&lt;/Direction&gt;
    &lt;ContextInfo /&gt;
    &lt;/RunbookParameterItem&gt;
    &lt;/ParameterList&gt;
    &lt;RunbookId&gt;ca88b13b-861a-4d39-a3cb-fd912d951e35&lt;/RunbookId&gt;
    &lt;/ParameterMapping&gt;</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1120</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
    <Property Path="$Context/Property[Type='WorkItem!System.WorkItem']/Title$">Execute Orchestrator IR - Autoassign</Property>
    </Object>
    </ObjectTemplate>

  • Imessage - phone number cannot be changed

    i changed my sim card and imessage is showing my old number as part of its setiings in "you can be reached by imessage at:" its greyed out and cannot be changed to my new number  - an idea how to change these settings have tried to switch off and restart and log out all my other devices - no luck

    Hello dmken,
    Thank you for the details of the issue you are experiencing with your iPhone.  It sounds like your reactivate iMessage.
    I recommend signing out of your Apple ID, and then turning iMessage and FaceTime off.
    To sign out of your Apple ID
    Go to Settings > FaceTime, tap your Apple ID, and select Sign Out.
    Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out.
    Next, restart your iPhone, and then enable iMessage and FaceTime and sign back in.  You can find more information at the following link:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • PR00 cannot be changed on header level

    Hi All,
    I activated the "header condition" flag of the condition type "PR00". And the manual entries flag of PR00 is marked as "C" (Manual entry has priority) But when I created a sales order, the PR00 still cannot be changed. Anyboday knows about the reason? PR00 is now changeable on item level.
    Thanks
    Jerome

    Hi,
    I think you agree that that the PR00 condition at header level is a collection of all the line items.We are maintaining the condition record for the articles in the condition record.Which are at line item level.PR00 at header level includes the toatsl of all line items PR00.
    In case if you want to give total net order value HM00 condition type
    Thanks
    M.Sridhar

  • Delta DTP cannot currently be deleted (see long text)

    I deleted all the requests..actually there is no data in the write DSO and I have not loaded the cube...I want to delete the DTP and create a new one.
    Delta DTP cannot currently be deleted (see long text)
    Message no. RSBK037
    Diagnosis
    You want to delete a delta DTP that has been successfully used to load requests from the source into the target. If you delete the DTP, you will also delete the information on the source data that was successfully transferred. As a result the source data would be transferred again, if you create a new delta DTP that links the same source with the same target.
    System Response
    The system terminated the delete operation.
    Procedure
    You have two options:
    1. Delete all the requests loaded with this DTP from the target and then delete the DTP.
    2. Do not delete the DTP and continue to load deltas using this DTP.

    That depends is  your prod system open to create Infopackages & DTP if so you can do that..but this may require a change in the Process Chain as well to change the DTP if at all a process chain exists for the same.

  • The valuation category cannot be changed in MM02

    Hi,
    While activating the Valuation category in accounting view in materail master getting the below error
    "The valuation category cannot be changed" due to batch xx is existing.
    checked the following.
    1.No open PO's or PR's or any other documents.
    2.No stocks.
    Batch stocks also exhausted.
    However still system showing message that, batch stocks are existing there by not allowing to make any changes.
    Please suggest.
    njs.

    Hi,
    There must be a few threads about this...please always search first on the forum before posting a question.
    (you have to archive batch masters to be able to carry out the change)
    Regards,
    Csaba
    Edited by: Csaba Szommer on Feb 21, 2009 5:34 PM

  • Generated analysis authorization cannot be changed

    Hello all,
    did someone manage to edit/delete generated (from DSO) analysis authorizations? When I want to correct a typo in one of the generated analysis authorizations it is not possible although the system is telling that it should be possible to do so. I did not find any note or thread yet.
    Message number RSEC292:
    Diagnosis text
    A generated authorization can be changed (this message is only a warning ), but one should be sure that this authorization is not generated again. Then it will be removed from the user, created again (perhaps with different content), and if there no fixed name was generated, it is renamed.
    Thanks in advance for your inputs

    Hello Lana,
    this is how SAP solved the problem
    Bye Petra
    Spezifikation: Message RSEC292: Generierte Analyseberechtigungen können nic
    Short text:
    Message RSEC292: Generierte Analyseberechtigungen können nic Langtext
    It is not possible to change from DSOs generated analysis
    authorizations although the system is telling that it should be
    possible to do so. Authorizations are sufficient (SU53; SAP_ALL)
    Message number RSEC292:
    Diagnosis text
    A generated authorization can be changed (this message is only a
    warning ), but one should be sure that this authorization is not
    generated again. Then it will be removed from the user, created again
    (perhaps with different content), and if there no fixed name was
    generated, it is renamed.
    Here is the communication path (please read from below):
    09.07.2007 - 09:03:36 CET Petra King Info für SAP
    Hello Ms. ,
    I always was telling about one issue:
    Change of generated analysis authorization is not possible.
    Since BI 7.0 we are talking about analysis authorizations so the
    transaction code used is obvious.
    There is no need for furhter information because it is only this single
    issue: I guess that it should be an error message and not a warning
    message and SAP made a mistake here by using the wron message category.
    I was never talking about users and xxxxxx is not an user but an
    analysis authorization.
    Please consider the call a solved - in the meantime I got
    professional support from the SDN platform.
    Regards,
    Petra King
    05.07.2007 - 09:14:22 CET SAP Antwort
    Hello Ms King,
    I must say that I find this message quite incomprehensible. First you
    write that you are irritated because my colleague asked you which
    transaction is being used to generate authorizations. This information
    is necessary so that the message can be assigned to the appropriate
    area. Indeed, the message was incorrectly sent to BC-SEC. Next you
    write that you are angry when I give you a consulting note regarding
    generation of analysis authorizations. I am mystified as to how such
    information from customers should help us in solving a technical or
    procedural probem. I have read the message from the beginning and
    there is very little technical and procedural information. Moreover, itis not clear what the "error" is here. The message RSEC292 is a warning(as clearly stated in the long text of the message) and this should not
    hinder the process. Lastly, in your last info you refer to a specific
    user, xxxxxxxx, as an example of a generated authorization. This is
    separate issue than the original:
    It is not possible to change from DSOs generated analysis
    authorizations although the system is telling that it should be
    possible to do so. Authorizations are sufficient (SU53; SAP_ALL)
    So in response to the original inquiry regarding RSEC292. The answer,
    as I have already mentioned and as stated in the text, is that this
    is just for information purposes. Please continue with the process.
    If you have a separate inquiry regarding the authorizations of
    particular users, please open a second message. We request that
    customer log one issue per message. Please read note 375196:
    Separate message for new problem/subsequent problem
    Regards,
    Senior Support Consultant
    SAP Active Global Support
    Netweaver Business Intelligence
    03.07.2007 - 15:14:39 CET Petra King Info für SAP
    Hello ,
    can you please contact the Basis Administrator xxx via phone
    (+xxxxx) so he can open the line and provide you with the
    user and password for system xxxxx.
    Please note that the error occurs on xxxx and you can have a look at the
    analysis auth. xxxxxxxx as representive for one of the generated
    authorizations.
    03.07.2007 - 15:08:43 CET Petra King Info für SAP
    Hello ,
    I am getting angry because note 1052242 is a documentation and I
    executed everything besides the fact that the analysis auths cannot be
    changed. Please read the error message from the beginning.
    Regards,
    Petra King
    28.06.2007 - 14:52:09 CET SAP Antwort
    Hello Ms King,
    Please excuse the delay in the processing of your message.
    Please read note 1052242 if you have not already done so. If this note
    does not help you to solve the problem, I would like to have a look at
    the situation on your system. Please open the R/3 Support connection
    provide me with a user and password. This information can be stored
    in the log on information of this message.
    Regards,
    Senior Support Consultant
    SAP Active Global Support
    Netweaver Business Intelligence
    25.06.2007 - 08:48:03 CET Petra King Info für SAP
    Hello ,
    if this is in the wrong queue, yes please forward it to the appropriate
    queue and please let the question be answered asap.
    Thanks,
    Petra King
    21.06.2007 - 07:47:29 CET SAP Info für Kunde
    Hello Petra,
    it is possible to generate authorizations in PFCG too. As RSECADMIN
    belongs to BW-BEX-OT-OLAP-AUT, I forward your message accordingly.
    Best regards
    Support Consultant
    Global Support Center Austria
    Netweaver Web Application Server ABAP
    20.06.2007 - 09:54:47 CET Petra King Info für SAP
    Hello ,
    sorry to let you know so late but there was a typo in my email address
    xxxxxinstead of xxxxxxxxx
    Your question is a little bit irritating. Generation of analysis
    authorizations in 7.0 is usually done only with transaction code
    RSECADMIN - correct me if there is another possibility. Generation
    works fine but the authorizations cannot be edited after then.
    Bye,
    Petra
    23.05.2007 - 11:53:16 CET SAP Antwort
    Dear Ms. King,
    please let me know which transaction code do you use or in which
    transaction do you get this message.
    Best Regards
    Support Consultant
    SAP Active Global Support - Netweaver Web Application Server

  • Password cannot be changed

    Hi all
    On the Lost password Management page, after type in the new password and click save the following error shows:
    "The Directory Server password syntax was violated. The password cannot be changed"
    this is on Active Directory 2008 as backend LDAP for OAM 10.1.4.3.0.
    thanks

    Hi and welcome to the forum!
    HDD password can only be changed using particular ThinkPad it was set on.
    Put the drive in the ThinkPad you used to set the password on the HDD and see the following posts:-
    http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Can-t-remove-HDD-password/m-p/322215#M12123
    http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Thinkpad-T400-and-HDD-password-OCZ-Vertex/t...
    Hope this helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Error "InfoProvider was changed or activated at runtime" when refreshing WB

    Hello SAP gurus!
    Here's tricky case: we've got several workbooks with multiple queries in it based on one MP. After reactivating this MP in production, those workbooks began to fail with error "InfoProvider was changed or activated at runtime".
    Wierd thing is, that I can refresh each query separately, and I can refresh workbooks with only one query on that MP,
    I can execute queties in Web on this MP, - but I cannot refresh whole WBs with multile queries. This issue does not allow us using broadcasting, so it's a serious problem fo us.
    We're on SAP GUI 7.10 and 7.20 ( same error in both versons ). MP is checked to be active. RSRV for those queries doesn't show any errors.
    Please, if you have any hint what's happening, that would be really appreciated!
    Thanks guys,
    Daniil

    Hello Michael!
    thanks for your input! I've had similar idea, but I consider it as a final option. Our landscape and authorization policy does not allow to make changes in production systems directly, so we'll have to transport MP from development system, which is not easy due to lots of approvals I need to get, and no garantee that it'll work as we still don't know the root cause.
    I would really appreciate any input regarding ideas what can be the cause or how to fix it without reactivating MP in prod.
    Many thanks in advance!

  • Message : Event package cannot be changed; bookings already

    When i tried to offering event using i got following message  : T-code :  PIQACADOFFER0   
    "Event package cannot be changed; bookings already exist"  Message no. HRPIQ00OFFER109
    Event is not created for this event package and i wander this is new function in EP3 that i have to override
    or just program error.
    regards,
    jin dal

    Jin dal,
        System is using view table V_PIQMODBOOKED to check no of booking.
    Check is there any active booking record exists for that event package? Which make sense because first you build event plan (event and event package) then you allow students to book.
    Prabhat Singh

  • Transport error - Data type cannot be changed

    I have an infoobject whose data type was changed from NUMC2 to CHAR2.  Everything is fine in Dev system.  However, when I transport to Q, I get method execution with error message "Data type cannot be changed".
    Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
    InfoO. YHRSGB01 is used in compounding of YHRAUS01: Data type cannot be changed
    Characteristic YHRSGB01: The method for SID entry has changed
    Characteristic YHRSGB01: The data type has changed from NUMC to CHAR
    SID Table /BIC/SYHRSGB01 contains data: Characteristic YHRSGB01 cannot be activated
    Text Table /BIC/TYHRSGB01 contains data: Characteristic YHRSGB01 cannot be activated
    InfoO. YHRSGB02 is used in compounding of YHRAUS02: Data type cannot be changed
    Any ideas please?
    -Sonny

    Hi,
    1. It will be better if you delete all the data in Development & Quality system for this Objects - Re Activate -collect objects and then transport .
    2. InfoO. YHRSGB01 is used in compounding of YHRAUS01
        InfoO. YHRSGB02 is used in compounding of YHRAUS02
        this two objects are compounded
       check weather this Componded Info objects are available in   Quality System, if not transport them prior
    Regards
    Hari

  • The item contains one or more busy items that cannot be changed

    We have a Windows 2003 file server and we are having issues with Macs retrieving files/folders from it. There is a folder on the Windows share named "dropbin" that UserA has full permissions on. UserB has the following NTFS permissions on the dropbin folder.
    Traverse Folder / Execute File Allow
    List Folder / Read Data Allow
    Create Files / Write Data Allow
    Create Folders / Append Data Allow
    Write Attributes Allow
    Write Extended Attributes Allow
    This gives UserB the ability to look inside the dropbin folder and place content in there. This same user cannot delete or pull down anything that a different user (UserC) has put in there. UserA (the person with full permissions) should be able to pull down anything put in there.
    This works fine from an XP box if an XP user (UserB) puts content in there UserA from a Mac or a PC can get and manipulate the data. If a Mac user (UserB) puts a file up there (it seems to happen with a .txt file, a .cp file, or a .zip file) UserA from a Mac gets the following error when trying to download the file:
    "You may need to enter the name and password for an administrator on this computer to change the item named item.txt"
    When you hit continue you get the following error:
    "The item item.txt contains one or more busy items that cannot be changed"
    If you proceed to enter in the admin credentials, the file doesn't copy down to the local Mac and fails without an error.
    A couple of things we noticed....
    1. If Mac UserB puts up a Word document or a .dmg file then UserA from a Mac can pull it down fine without errors.
    2. On the Windows 2003 server we noticed that for each file we tried to upload it creates a ._ corresponding hidden file. For example, item.txt also has ._item.txt. If we go up on the server and remove the hidden file, Mac UserA can pull down the file fine.
    3. We tried zipping the files (or files and folders) locally on Mac UserB's desktop then putting the .zip file up there but since it creates a ._file.zip Mac UserA still can't pull it down.
    4. The fix we found for this is to have Mac UserB place the files they want to upload into a folder on the desktop, then upload that folder. When Mac UserA comes by they can pull down that folder's worth of stuff.
    We are accessing the Windows 2003 file share by going to the finder and using the "Go" menu and entering in:
    smb://servername/sharename
    and they use their Windows domain credentials to log in.

    We may have figured this out but it requires some more testing. The reason why the file upload creates the ._ files in the dropbin folder when UserB puts content in there is because UserB does not have the "Delete" permission in that folder. My guess is that it creates the ._ file when the file is in transit but then deletes that file after it has completed the transfer (but without the delete permission it couldn't remove the ._ file). What we did was added another user to the NTFS permissions for that folder, we added the built in "CREATOR OWNER" account and gave that user the "Delete" permission, now the ._ files do not appear under there and UserA can come along and manage the uploaded file okay.
    Hope this helps someone else out.

  • One or more busy items cannot be changed

    I've dragged songs out of iTunes to a folder on the desktop, dragging this folder to my external HD the message "the item "..." contains one or more busy items that cannot be changed" comes up. The permissions for this folder are read and write so not sure what else to do. I've done this before and had no problems...

    I finally sorted out a similar problem.
    Discover which files are involved by copying the *contents* of the source folder to a destination.
    The offending folder (or folders) should display by name. If the item is a file, the file name should display. You can drill down within a folder by the same process: copy the contents (not the entire folder) to a destination, to find the offending folder or item.
    I ran across and old (2002) posting which mentioned file type as preventing deletion:
    http://hints.macworld.com/article.php?story=20020920055805577
    I found an old application which can display file creator and type on OS X:
    http://www.frederikseiffert.de/filetype/
    How old is it? The System Requirements are:
    "FileType runs on Mac OS X v10.0 or later and on Mac OS 8.6 or later with CarbonLib 1.3."
    It runs on 10.4. Haven't tested anything later.
    I discovered that the file types on the offending files were "brok". It so happens they were all tiffs, so I changed them to "TIFF". I still got a message about needing to enter an admin user and password, but the copy then worked.

  • I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

    I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

    I used Terminal to change the permissions on the folder in question.  I followed the instructions in this article:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one.   I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable.  So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal.  Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal).  I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.)  And it fixed the problem right away.
    What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do.  It didn't mention Terminal.  What would really be helpful is if Apple included a link to a page like this in their error message.

Maybe you are looking for

  • What are the steps required for running a form in web browser in form10g

    Hi All, I want to run my form in web i.e forms10g. Please guide me what are the application server, configuation files and built in packages required to set up. Thanks

  • Paging Using AJax

    Hi, I am trying to write a code for Paing using JSP, Ajax, Servlet. I have problem with managing indexes. Here what I have done... I have created a js file which will send an ajax request to servlet. request consists of startIndex, endIndex . Using t

  • Reinstall an app from the app store...

    Any ideas on how to reinstall an app from the app store. Tried the listed hold option, etc to avail...

  • Get Info image data missing

    I have used the Finder's Get Info command and accompanying window to determine the height and width of images since the beginning of time. Today that capability suddenly disappeared. When I select an image in the Finder and invoke Get Info, under "Mo

  • CS3 Installation Error...

    I attempting to intstall D/W CS3. It unzips the files and starts to install, then a warning pops up stating that I need to close the following applications: "outlook.exe" Problem is, O/L is not running. Any suggestions on how to correct. I have alrea