DTP (Data Transfer Process)

Hi, I would like to know more about DTP (Data Transfer Process), how can i use it to replace infosources, transfer rules and update rules in just one transformation.
I will be very grateful for your comments and your help...
Thanks and regards!

hi,
You use the data transfer process (DTP) to transfer data within BI from a persistent object to another object in accordance with certain transformations and filters
It is like a replacement of the info packages in the olderr versions.
Data transfer processes are used for standard data transfer, for real-time data acquisition, and for accessing data directly.
youu can refer to this link for mor infos.
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
hope it helps..

Similar Messages

Error in Data Transfer Process (DTP) Urgent!

Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL? Please help me guys.....
Thanks,
nips

Please do not post the same question twice.
Error in Data Transfer Process (DTP) Urgent!

Issues in Data Transfer Process

Hello All,
After creating transformation from Infosource to InfoCube, now i am trying to data transfer process.
In DTP Type it displays "DTP for direct process", but i need DTP type as Standard(Can be scheduled).
Its giving me an error as "Source does not support direct access"
Could any one help me to solve this error.
Thanks in advance
Regards,
Nithin

Hi,
You can only use the type DTP for Direct Access as the target of the data transfer process for a VirtualProvider.
Check the below links
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/frameset.htm
Regards
KP
Edited by: prashanthk on Jan 19, 2011 5:15 PM

Data Transfer Process and Delete Overlapping Requests

Hi All,
We are on BW 7.0 (Netweaver 2004s). We are using the new data transfer processing and transformation. We want to use the ability to delete overlapping requests from a cube in a process chain. So lets say we have a full load from an R/3 system with fiscal year 2007 in the selection using an infopackage. It gets loaded to the PSA. From there we execute the data transfer process and load it to the cube. We then execute the delete overlapping requests functionality. My question is, will the DTP know that the infopackage selection was 2007 so it will only delete requests with selections of 2007 and not 2006 from the cube? Basically, is the DTP aware of the selections that were made in the infopackage?
Thanks,
Scott

Hi Everyone,
Figure it out...on a data transfer process you can filter the selection criteria - go to the extraction tab of a DTP and click on the filter icon. Enter your seleciton conditions to pull from the PSA....these seleciton conditions will be used to delete the overlapping requests from the cube.
Thanks

What is the "Data Transfer Process" in the BI7.0, and how does it work?

Hi, experts !
I'm fresh on BI7.0.
What is the "Data Transfer Process" in the BI7.0, and how does it work?
And what is it used for ?
Could anyone help me? Plz send me some doc.
[email protected]
Thank u !

HI,
Refer this blog
/people/community.user/blog/2007/06/22/sap-netweaver-70-bi-data-transfer-process-dtp-blog-series
Also refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Thanks

Data Transfer Process filter: how to view the filter values?

Hi,
does anyone know how to view (and download) the values of a filter of data transfer processes?
I want to compare the filtervalues of data transfer processes from productive system with development system. Normally the DTP's are created in a development system and transported with TMS to quality and productive systems. In the productive system there is often the need to slightly change the values in the filter, and to do this directly in the productive system without transport.
If the same DTP is used and changed by another project after a while, it will overwrite the changes from productive maintenance.
By comparing the filter values one could evaluate the changes.
For info packages there is the same need. Here you can use table RSLDPSEL. Is there someting like that for DTP?
thanks for any help
Jean

Hi,
the difference you have in the infopack and DTP is
you can have any number of infopackages between the source and PSA but you can have only one DTP between the PSA and datatarget.
so there is no othere way than changing the filter values in the existing DTP.
just chk the filter option and choose the required chars for ur load and activate the DTP.
Ramesh

RE: Transformation and Data transfer process.

Hi guys,
Please some bosy help me out by providing the differences between Transformation and Data Transfer Process.
thanks in adwance
omkar

Hi Omkar,
 Trnasformations providing the mapping between Sorce fields( datasource to data target). only map the structures..
Transformations:----
-->Trsnsformations are used to create mappings between two BI Objects and to
transform data from BI Source(From where) to BI Target .
-->You can create One-One Mappings between source and target in BI
-->In transformations Source is : DataSource, InfoSource, DataStore object,
InfoCube, InfoObject and InfoSet
-->Target is: InfoSource, InfoObject, DataStore object and InfoCube.
-->Transformations replaces the transfer and update rules.It's like creating transfer
rules and update rules.Through these rules/mappings/transformations, the
system is going to transform data from Source to Target.
but DTP means.. the data loading procedure will be done with this step..
DTP :
 DTP is used to transfer data from PSA to the infoprovider.
The data transfer process can also be used to control data distribution from a BI system into any target outside of the BI system. For this purpose, a data transfer process with an open hub destination is used as the target.
 Since Deltas are now based on request from PSA ,you can have multiple datatargets pulling data with same selection criteria from same datasource(ECC) with INITS/DELTA,not possible earlier.
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
regards
@jay

Transporting of Data Transfer Processes fails

Hi to you all!
Ive a problem when transporting DTPs
Always the import of a DTP fails in the after-import method RS_DTPA_AFTER_IMPORT with the same error message.
At the step Post Processing/Checking the Activation for Data Transfer Process <name of DTP> the following error occurs:

PSA table name was blank
**** Error from PSA ****
Error when activating Data Transfer Process

So I built a test case with a simple DTP.
First I successfully transported a simple InfoObject as the source of the DTP.
Then I successfully transported a simple DataStore-Object as the target of the DTP.
Next I successfully transported the transformation of the DTP.
The transport of a DTP still fails with the error message mentioned above.
Ive no idea what the error message what to tell me
Any suggestions?
Thanks
Kai
PS: I' currently working SP09...

Steps you followed seems to be correct
You may wish to check OSS Note 1020231 - 70SP13: UNCAUGHT_EXCEPTION in after import
Hope it Helps
Chetan
@CP..

Need for Data Transfer process

Hello Friends
While loading data from ODS to InfoCube, do I really need to create a data transfer process or is there a way that the data loaded into ODS can be subsequently loaded into the cube after undergoing the transformation. If yes, please let me know how we can do that.
Thanks and Regards
Rishi

Hi,
Refer.
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/frameset.htm
Thanks,
JituK

Activation of Objects with Type Data Transfer Process

Hi Experts,
I am stuck in a problem of activation of DTP. I loaded the data from the Datasource to PSA and there are about 200,000 reocrds.
Now I wanted to take this load to DSO NEW table ..I have created a DTP and when I try to activate the DTP I get this Error
Activation of Objects with Type Data Transfer Process
    Internal Activation (Data Transfer Process )
         Post Processing/Checking the Activation for Data Transfer Process DTP_49Z7OSAHFAR9O8335ED6
              Error when activating Data Transfer Process DTP_49Z7OSAHFAR9O8335ED67X11C.
I tried to activate the Data source but it still didnt help. Looked in SDN for some related stuff but most of them are talking about going for SP 11 ..we are already on
*SAP_BW     700     SAPKW70014     *
Your suggestion will be appreciated with maximum points
Thanks

Hello Experts,
Could you'll please help me out with this ...I
I deleted the DTP and created back again
logged out of BW and logged back again
Infact I found a SAP note 1086877 and i applied it ..but it still didint help
Whie loading the Master Data from PSA to DTP ..it worked fine.
While Loading the transactrion data I went to Tcode RSBATCH and in the drop down I selected the DTP activation and gave a 3 Back ground processes....Ever since that it started giving me problem
Your help will be appreciated...my data loads are stalled ..i mean I cant move forward.
Thanks

Data transfer process(urgent)

Hi bw gurus,
can any one help me on data transfer process .i need to prepare the ppt on this .plz help me out in this..
thanks in advance
uma reddy

Hi Uma,
Check out the below link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/content.htm
In BI 7,using info packages you can only load data upto PSA. To load the data from PSA to data targets we use DTP's.
Hope this helps.
Cheers
Praveen

You are not authorized to display the data transfer process

Dear Experts,
Good Morning!
I want to that I am getting one Message no. RSM906:"You are not authorized to display the data transfer process
".What does it mean .I want to load the data in the 0SD_C03 cube ,can able to load upto PSA but unable to create the DTP.IS this because of this messege of authorization or some other reason ,Request you to please suggest me for this issue ,thanks in advance .

Hi,
You may not have authorisation for S&D cubes, so i feel it is an authorisation issue, kindly take one of your colleagues id to check this, if it is working for them, then i think you have to add those to roles to your ID..
Still there is a option to override this, but you have debug it once, and change the authorisation code(sy-subrc) value, and please dont try this if you are not familiar at ABAP, and this is not adviceable if it is an authorisation issue as there will be logs recorded for all the things you are doing and oreover each time when u click on DTP you have debug it to change the authorisation
code..
Note: If it is QA or Dev system you can try debugging it, but if it is production system then i think u have to use an alternate ID...
Regards,
Nanda.S

Data Transfer Process and Infopackage

Are both Data Transfer Process and Infopackage the same...Can someone please explain... thanks

Hi,
Pl search the forum for these questions as these are mostly discussed in the forums.
or simply google it...
Now IP is mandatory and used to bring the data from source to PSA..
and DTP is loading and transfering the data within BI itself.
rgds,

Is there any documentation for filter routine in Data Transfer Process?

I am trying to create a filter routine in the Data Transfer Process to select different billing types depending on what date the Data Transfer Process is running....
I have searched through SDN and found some examples, but some formal documentation would help.
Is there any documention on filtering in a Data Transfer Process using a routine?
I am in 7.0

data: l_dow TYPE I,
      L_S_RANGE TYPE rssdlrange.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'F2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'G2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'L2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZDR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZEDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZMD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRED'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZSMP'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSI'.
APPEND L_S_RANGE TO l_t_range.
CALL FUNCTION 'DATE_COMPUTE_DAY'
EXPORTING
    date = sy-datum
IMPORTING
    day = L_DOW.
IF l_Dow EQ 5.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S2'.
APPEND L_S_RANGE TO l_t_range.
ENDIF.

Crash in data transfer process, exception cx_rs_step_failed_callstack

Hi,
I am having problems with a data transfer process, i am getting the message:
Extraction datasource Z_WMS_VRM
   Prepare for extraction
   Exceptions in Substep: Extraction Completed
   Processing terminated
When I click the button behind "Exceptions in Substep" it jumps to a line with
CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack
in method IF_RSBK_CMD_X~GET_DATAPACKAGE.
When I look in the PSA(13 records) it all looks ok, no weird values. De infopackage runs ok and fills the PSA. Screenshot of PSA contents: http://i44.tinypic.com/sesqw2.jpg
The datasource is an external DS filled by powerexchange 4.
The system's current support pack is 18.
Edited by: Thijs de Jong on Jun 23, 2009 12:00 PM
Edited by: Thijs de Jong on Jun 23, 2009 12:11 PM

Hello Thijs,
The same issue happened to me this week. This can happen for several reasons:
- Some parts of the loading line is not active, resp. structures were changed and need to be activated again.
- There is no more tablespace in the DB.
- There is a deadlock when reading a table (maybe the table is too big...)
Hope this helps.
Cheers,
Stephan

DTP (Data Transfer Process)

Similar Messages

Maybe you are looking for