DTP initilization

Hi,
How do we do initialization in DTP?
is possible do initialization in DTP? do favor for me.
REGARDS
-sreedhar

Hi Sreedhar,
Yes, surely we can do DTP initialization in SAP BI.
If you run any DTP with extraction mode 'delta' then it will work as 'init with data transfer', i mean to say it will pick all the data from source and sets the delta indicator.
If don't want source data and like to set the delta time stamp(same as init without data transfer) follow the below steps.
1) select extraction mode as delta.
2) goto execution tab and change the processing mode to "No data transfer; delta status in source: fetched"
now run the DTP. it will work as Init without data transfer.
If you are using BW 7.3 version, then in extraction tab it self you will have option "init with out data". check this option and run the DTP.
Regards,
Venkatesh

Similar Messages

Initilization in DTP's (How it works)

HI,
I want to set Delta Loads to my Cube from PSA
(PSA-->CUBE)
Info Package is full load....
For Deltas i didn't find any Initilisation Option in DTP....
In order to set deltas...do i need to perform my first load to CUBE as Full and Later set it to Delta
Please explain me in a bit detail
Thanks

Hi BW USER,
please see the solution:-
" want to set Delta Loads to my Cube from PSA
(PSA-->CUBE)
Info Package is full load.... "    <----problem
if you wish to load delta from PSA to cube then PSA should have the delta but in your case PSA gets Full load and hence the problem.
The DTP'S will simply pick up the requests available in the PSA which are not updated in the Cube( If you select Delta in DTP ) and so The DTPs are also picking full load .
Solution1:
Source system>>(delta)>>PSA>>CUBE.
1. schedule a Delta load use the following steps:
     a. Full load from source system to BI then run DTP which   will pick the Full load req in PSA to cube.
     b. initialize w/o transfer delta loads.
     c. Run the deltas infopackage to get delta in PSA then DTP to get this delta in CUBE.
Solution2:
Source System>>(full load)>> PSA>>dtp to ODS>>dtp to CUBE.
This model only requires a ODS in between your CUBE and PSA.
A DSO always generate Delta in change log table so if you keep this ods as a source to your CUBE you will always have deltas in your cube.
Hope this Helps.
Revert back if you still have sm problem
Please assign points if helpful
Manish

Error while executing a DTP

Hi All ,
I got an error while executing a DTP. Short Dump analysis points this error. : DBIF_REPO_SQL_ERROR.
Please provide in your valuable inputs to resolve this error.
Thank & Regards,
Rohit Garg

This error comes majorly when you have a deadlock in your code. Check ST22 if you have any short dump corresponding to it and see the source code where it is getting stuck.
If you find this dump explaining table space issue, then contact Basis, they will be able to help you with table space problem.
Edited by: Deepmala Agarwal on Aug 18, 2009 7:40 AM

Error while activating the DTP

Dear all,
We are using BI7.00. For one of our reports, the data is transferred from one cube to another cube. When the DTP which transfers the data is activated, the following error appears.
Error from PSA ****
Message no. RSAODS000
Error when activating Data Transfer Process DTP_D5Q7YV8OBC64VH1DG6MY6O0UI
There is no other information regarding this message. I have tried deleting the DTP and re-creating a new one but still problem persists.
Can experts throw light on this?
Regards,
M.M

Hi Magesh,
Please check the below solution:
you can execute the 'RS_TRANSTRU_ACTIVATE_ALL' program for the 3.x InfoSource(s) affected.
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package will become available once Note 914304 with the short text, "SAPBINews BI 7.0 SP10", which describes this Support Package in more detail, is released for customers.
To provide information in advance, the note mentioned above may already be available before the Support Package is released. In this case, however, the short text will still contain the words "Preliminary version".
Note No: 968504
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=968504
With Regards,
Ravi Kanth

Error while copying a DTP

Hi Experts,
Its a simple yet confusing error to me. I copy a DTP which has some filters defined. I get an error saying both the DTPs can not have the same filter criteria - if its a Delta DTP. I say ok and try to change the filter values , interestingly the error still remains and my new DTP does not activate.
Please suggest how I can resolve this. I can not change the udpate method to "Full". It has to be a "Delta".
Appreciate your inputs,
thanks,
Shweta

Hi Shweta,
I think you have posted your question to the wrong forum. The OnDemand forum is specifically for applications like crystalreports.com and bi.ondemand.com.
Cheers
Steve

SHORT DUMP WHILE EXECUTING DTP.

Hi Gurus,
I have got a short dump while executing DTP the Error is as Follows.
Runtime Error: MESSAGE_TYPE_X.
Reasons for Error: 1.The installation of the SAP GUI on the present server is faulty or obselete
2.There is a error in the application program
And i have sent the sreen shot of the Short Dump to BASIS TEAM and they have replied me that they have to install some patches and it will take some time.
But i have no much time and i have to someway or the other execute the DTP and load the data.
Is there any shortcuts for this i mean to say without the involvement of Basis team that i can do in th BI System
Regards
Amar.

Hi Amar,
If the problem is with with System itself, how can we all have a short cut in that case. You may give it another trial, but you have to wait for the patches to be applied. Ask your basis team to get it done ASAP.
Thanks..
Shambhu

Error while executing DTP

Hi gurus,
Iam trying to extract the data from r/3 using generic extractor the data is loaded into PSA sucessfully, but iam getting following errors while executing DTP.
1.An error occurred while executing a transformation rule:
The exact error message is:
The argument 'EA' cannot be interpreted as a number
The error was triggered at the following point in the program
GP4D35STLXQI3SHIVNQC2FSJ7MB 791
2.The data record was filtered out because data records with the same key
have already been filtered out in the current step for other reasons and
the current update is non-commutative (for example, MOVE). This means
that data records cannot be exchanged on the basis of the semantic key.
Please guide me accordingly.
Regards
Amar.

Hi
While mapping the Qty Fields it is must to add UOM to the Qty Fields and map it with relevant Info Objects.
The Semantic Keys defined at DTP are also has some issues, try to give a dummy key figure if you are using DSO in the data flow as the DSO has the Overwrite mode.
(Choose Semantic Groups to specify how you want to build the data packages that are read from the source (DataSource or InfoProvider). To do this, define key fields. Data records that have the same key are combined in a single data package. This setting is only relevant for DataStore objects with data fields that are overwritten. This setting also defines the key fields for the error stack. By defining the key for the error stack, you ensure that the data can be updated in the target in the correct order once the incorrect data records have been corrected.)
Hope it helps and clear

Help. I'm trying to create a DTP for 0INDUSTRY texts

I'm trying to create a DTP for 0INDUSTRY (texts), but when I assign the DataSource (0INDUSTRY_TEXT), it shows me the next error message: "Target 0industry (type IOBJ) is not active".
Of course I've checked 0industry and it is already active!
I have the same issue with several characteristics.
Do somebody knows what can I do?

Hi,
Try comin out of rsa1 transaction and then going back in...else login and logoff. Its generally happens that the changes dont get reflected and it then shows that error.
assign points if helpful
Regards.

DTP can Not extract data of date field from PSA to Target DSO

Hi everyone.
I enhanced several fields in datasource "2LIS_12_VCITM". that is date field "BLDAT" and another date type fields.
The data of date type fields are extracted very well from datasource to PSA.
But only field "BLDAT" among them are NOT extracted from PSA to target DSO.
Another date type fields is good. but only "BLDAT" field is empty.
I added "BLDAT" later than another date fields.
Is that the reason??
I don't know why.
Let me know the solution. pls~~~~

Hi,
Try deleting and recreating the DTP and loading again.
This solution refers to note 925941 and should be solved in SPS10.
Best regards,
Olav

Unable to load the data into Cube Using DTP in the quality system

Hi,
I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
Please suggest .
Thanks,
Satyaprasad

Hi,
Some Infoobjects are missing while collecting the transport.
I collected those objects and transported ,now its working fine.
Many Thanks to all
Regards,
Satyaprasad

Incorrect initial value for char 0FISCYEAR in i_t_range in DTP filter prog

Gurus
I need your help , I have searched all the threads but could not find anything which can help me resolve this issue.
I have a filter in DTP as a routine to get the year from system date.
The program is correct for syntex but when I trigger the DTP I am getting the following message , not sure what needs to be added to my programe.
Incorrect initial value for characteristic 0FISCYEAR in i_t_range
Message no. DBMAN889
appreciate any help I can get to reoslve this ASAP.
Thanks in advance

Hi
Pleae check if you have initialised with a NULL value . "blank/null" is indeed not a valid characteristic value for fiscal period. Fisc.per is of type NUMC which means all characters have to be numerical. The initial value should be "0000000" .
Thanks,
Rajesh.
Please provide points to answers if you find them helpful

What is the diffrence between full load and delta load in DTP

hI ,
I am trying to load the data into CUBE from another cube using DTP ..
There are 2 DTPS ..
1: DTP with full load
2: DTP with DELTA load ..
what is the diffrence betwen thse two in DTP ...
Please can somebody help me

1: DTP with full load - will update all the requests in PSA/source to the target,
2: DTP with DELTA load - will update only new requests to the datatarget
The system doesnt distinguish new records on the basis of changed records, rather by the request. Thats the reason you have datamart status to indicate if the request has been loaded to further datatargets.

DTP not getting displayed in Transported Objects in Quality System

We are Tranporting all the CRM Master Data but no DTP AND IP are getting displayed in Quality system is there any setting to make to transport these or get it displayed.
Please help
Thanks
Soniya

I dont understand the question. Can you pl explain what do you want to do?
Ravi Thothadri

DTP can't be deleted, if transformation was deleted before it

DTP can't be deleted, if transformation was deleted before it
How I can delete that DTP?

Hi,
if you want delete the Delta DTP or Full DTP use program deleting DTP's.
enter the T-CODE- SE38 -> run the program -> give the DTP technical name -> execute.
it will go permanently.
Thanks,
Phani.

Exception error in DTP

Hi ,
I am getting error when i run DTP , The request shows red when i see the log it says exception raised in Start routine ,
below is the Warning message in start routine when i go through the log see
The exception CX_static_check is neither caught nor is it declared in RAISING clause of "EXECUTE"
but when i see in start routine and transformations there is no syntax errors , please some one help me how to come out from this...
Regards,
Roma

Please Debug the code while the data is being loaded & you will come to know where exactly is the DTP failing.
Also, go to ST22 to see the run time error & the piece of code where it is pointing to.
If possible, paste the piece of code that is written after you've found out where exactly is the problem.
Regards
Vishal
Edited by: Vishal Sanghvi on Mar 14, 2011 8:47 AM

DTP initilization

Similar Messages

Maybe you are looking for