DTP is not fetching any data eventhough data is there in psa

Hi All,
I need to load data from existing data source(2lis_03_bf) to new data target, data is available in data source for last 1 year, as my client is retail, and also huge data i tried to load data with filter on BUDAT, for 1 month, but dtp says data is not avialble, i cant run whole data in asingle shot.
i created new dtp and tried with other selections , even then its showing no data available, i tried with full and delta update in dtp but no luck.
Kindly suggest me.
Regards,
Yunus

Hi Yunus,
I believe that your DTP was Delta DTP & i think you might have already loaded the data into the Datatarget. So when you try to run the Delta DTP, it is possible that there is no new Data.
(Or) If you have not loaded the PSA requests to your Datatarget, delete the already created DTP.. Then create a new FULL DTP, activate it & try loading.
(Or) create different DTP's with different selections with no overlapping in the selections. Make sure that the selections you are giving are having data in PSA.
Hope it helps!
Regards,
Pavan

Similar Messages

Sys_refcursor not fetching any data although query returns value

hi!!!
I am using sys_refcursor to return columns,and using below procedure to do so.Although data is there in table_1 and table_2.
PROCEDURE test_pro(abc_date N DATE,
cur_get_data OUT sys_refcursor
OPEN cur_get_data
for
select A.col1,B.col2
from table_1 A
where A.dis_date=abc_date
left outer join
table_2 B
on
A.dis_date=B.dis_date;
IF cur_get_data%rowcount=0
then
     raise e_error;
END if;
EXCEPTION
     when e_error
     then
          ------no_data_found;
     when others
     then
--------(giving SQL error with error code);
END      test_pro;
while running below sql in sql window of pl/sql developer fetching
data
select A.col1,B.col2
from table_1 A
where A.dis_date=abc_date
left outer join
table_2 B
on
A.dis_date=B.dis_date;
but while testing the test_pro in test window of pl/sql developer it is
not fetching any data and raising e_error each time
is there any problem arising using IF cur_get_data%rowcount=0 as each time it is going to exception block..
so can somebody please put some ideas what cud be the possible reason for this??

Welcome to the forum!
Unfortunatley you posted to the wrong forum. This question belongs in the SQL and PL/SQL forum.
PL/SQL
>
sys_refcursor not fetching any data although query returns value
but while testing the test_pro in test window of pl/sql developer it is
not fetching any data and raising e_error each time
is there any problem arising using IF cur_get_data%rowcount=0 as each time it is going to exception block..
>
A cursor doesn't fetch data - your code has to do that. The code you posted doesn't have any FETCH statements so no data will be fetched.
There is no problem using 'IF cur_get_data%rowcount=0' but it will always be 0 in your code because you are not fetching any data.
I'm guessing that you are trying to determine if there are any rows for the query. That isn't going to work since a cursor doesn't fetch rows.
You just have to return the cursor to the caller and the caller will have to perform at least one fetch to see if there are any rows.
If the above answers your question the just mark the question ANSWERED. Otherwise, since you have posted in the wrong forum
1. repost the question in the SQL and PL/SQL forum
2. Edit this post to add a link to the new thread in the other forum
3. Mark this question ANSWERED so people will follow up in the other forum.
Thanks.

Invoice History Report not fetching any data without parameters

Hi
As per user guide, you can run the Invoice History Report without giving supplier parameter. "If you want to submit the report for one supplier, enter the supplier. Leave this parameter blank to submit the report for all suppliers."
But when we run the Invoice History Report, if we don't give any supplier, no data is coming in the report. If we give a supplier, data for that supplier is fetched by the report.
Has anyone faced this issue, is there any solution for this?
We are on the Oracle Apps 12.1.1 and the version on the report RDF is 120.11.12010000.5
Thanks!

Hi,
could you copy the MDX here ?
Would you be able to use ST01 / ST05 to trace further details ?
You can also go into the registry :
HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\SAP\BW MDX Query Driver
set the Trace to Yes
then use the path:
HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\SAP
set the "TraceDir" to the path for the logfiles
Ingo

Sql developer could not fetch any data while running queries?

I have downloaded SQL Developer , install jdk1.5.0_22 from the website. Then I run sqldeveloper.exe browse the jdk folder. After that i established the connection but it continuously showing loading..No tables No procedures are loaded . what should i do?

Be careful... SQL Developer requires a JDK or the server JRE (which I believe only comes in 64-bit, so go with the JDK if you are on a 32-bit OS).
Prior to 4.0, the SetJavaHome line in your install directory's sqldeveloper.conf (or sqldeveloper-Darwin.conf on the Mac) must be set, but in 4.0 and above that changes to product.conf under your OS's user settings. For Windows 7, that would be in...
C:\Users\<your-userid>\AppData\Roaming\sqldeveloper\1.0.0.0.0\product.conf
Hope this helps. If not, assuming Windows, run sqldeveloper.exe in the bin directory from a command line console so you can see any standard error output in the console, or do a Ctrl-Break to get a full thread dump of what's happening in the JVM.

Ibots not returning any data

Hi,
I have some ibots that I scheduled to run on a daily basis and which were working perfectly.
Suddenly the same ibots, they run but the content of the attachment says "The specified criteria did not return any data".
I checked the log files and could not see any relavant error.
If I go back in the report that I am sending through the ibot, it runs without any problem.
I tried to send it in different formats and run as different users, but the results are still the same!
Any idea what else I could check?
Type: Warning
Severity: 50
Time: Wed May 15 14:10:19 2013
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 199
Properties: RptPath-/shared/MICROS/giuliano/cube_build_verification;SID-btilnnapkfo2omg91a71b9m6n2;bindID-1;connID-31;ThreadID-4640;statementID-364;RSP-o:go~r:report
Location:
     saw.odbc.statement.fetch
     saw.subsystem.portal.pdf
     saw.delivers.rpc.getDeviceContent
     saw.rpc.server.responder
     saw.rpc.server
     saw.rpc.server.handleConnection
     saw.rpc.server.dispatch
     saw.threadPool
     saw.threads
SQLFetchScroll returned code SQL_NO_DATA_FOUND

Thanks it solved the issue.
But One more thing Now I have placed the parameters in the where clause of the query
Query-
select field1,field2,field3,field4,field5,job_name,candidate_name,interview_date from etc.ethr_irc_int_details
where field1 is not null
and job_name = :1
and candidate_name = :2
and interview_date = :3
in the VO I am executing
public void iniQuery(String S1, String S2,String S3)
System.out.println("insdie ini query of the VO");
System.out.println("S1 "+S1);
System.out.println("S2 "+S2);
System.out.println("S3 "+S3);
this.setWhereClauseParams(null);
this.setWhereClauseParam(0,S1);
this.setWhereClauseParam(1,S2);
this.setWhereClauseParam(2,S2);
executeQuery();
and in AM
ETHRIntDetailsVOImpl IDVO = (ETHRIntDetailsVOImpl)this.getETHRIntDetailsVO();
// IDVO.executeQuery();
// OAViewObject IDVO = (OAViewObject)findViewObject("ETHRIntDetailsVO");
IDVO.iniQuery(S1,S2,S3);
Row row = IDVO.first();
again I am not getting any data in the row??
Any idea if I am doing any thing wrong..
Please help urgently.
Thanks
Ashish

Custom reports in R12 not returning any data

I'm seeing an issue of custom reports in R12 not returning any data. So far what I've been able to dig into is that the report query itself is referring to APPS synonyms that are secured under MOAC. What I am able to do is run the query in SQL Developer after having run mo_global.set_policy_context and I receive the data I'm looking for. This is not the case when running the report through the concurrent programs request.
Secondly, I've also configured the concurrent program request to run as single operating unit mode. This aided in fixing any issues with LOVs on the parameter form. However, still no results from the report itself. I've also searched around quite extensively and added a P_CONC_PROGRAM_ID user parameter in reports developer, as well as adding SRW.USER_EXIT('FND SRWINIT') to the before report trigger and SRW.USER_EXIT('FND SRWEXIT') to the after report trigger as well. No luck. I've also tried running mo_global.set_policy_context on the before report trigger and no such luck.
Has anyone seen similar issues with this and could shed some light? At this point, the workaround I would see is to just change the query to use respective all tables and match up against the orgid, but I'd rather not do that.

I am facing exactly the same issue with 2 of my custom Reports in R12.1.3. We did our level best to find out the issue. It was always a hit and trial fix.
But the following were our observations and workarounds
0) The reports Conc Prog were in MOAC - Single mode. Both the reports had SRW INIT, EXIT and P_CONC_REQUEST_ID
1) The reports which caused the issues[NO data fetched for MOAC] had multiple Queries in the data model and one Query fetches data and the 2nd one doesnt. Both the queries when run from SQL developer after setting the org gave results.
Workaround for Report1
a) We deleted the data link connecting the 2 columns in both the queries and added a bind variable instead in the 2nd /child query to refer to the column in the parent query and linked the 2 groups.
Workaround for Report 2
a) In report 2 the queries were not linked to each other. Only one query used to return results and the 2nd one returned 0 rows. The workaround was to use the "where" conditions as lexical parameters after having set the value for the same in before report trigger.
Both the work around looks illogical. Still It worked..!
Thanks
Biju Radhakrishnan

Managed System Configuration ! The table does not contain any data !

Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
Thanks

Hi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali

MDM Change tracker iView not fetching the data?

Hello Experts,
we have MDM Change tracker application deployed and assigned to some role in portal. However, the problem is fields like "Table" etc are blank. I am not able to fetch any data in it. I have activated change tracking for the required table in MDM backend as well.
I was following this blog: /people/balas.gorla/blog/2006/09/08/change-tracking-in-mdm
It is mentioned that some DB setting have to be done and some query to be written. I am confused, I have an iView in portal so do I still need to write the query? Or what is that I am missing?
Please help.
Ameya

Hi Ameya,
The SQL query written in the mentioned blog is just to recheck the data.
Please recheck the settings using these documents:
http://help.sap.com/saphelp_mdm550/helpdata/en/45/c7b20339ee570ae10000000a114a6b/content.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/807861ac-f941-2c10-8f8d-c57f9d421b99?quicklink=index&overridelayout=true
http://help.sap.com/saphelp_nwmdm71/helpdata/en/49/a42bc834de1b93e10000000a42189b/content.htm
Also on resetting change tracker:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10cbe10c-0654-2c10-3d8b-ff99dadc402e?quicklink=index&overridelayout=true
The error can also occur if Database userid used has expired.
Hope this helps!
Thanks,
Ravi

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

When I tried to Mail Merge for Data is is not exporting any data.

HI,
EBS-12.1.3
DB-11gR1
OS - RHEL 5.6
[With my Login User and SysAdmin Login User] When I enter into to the "People -> Enter and Maintain" Form and then I press the "Export Button", there is error Alert
Function is not available to this responsibility. Change Responsibilities or Connect to the System Administrator
I Added the Function "HR ADI Seeded Integrator Form Functions" into the "AE HRMS Manager" Responsiblity. It is also working and Export Data icon is enable.
Problem:
But Problem is when I tried to Mail Merge for Data is is not exporting any data.
====================================================================
Steps
1.Move to the "People -> Recruirment" and then "Request Recruitment Letter" .
2. Enter the New Request. as
Letter Name "App. Letter Contract Site",
Automatic or Manual = Manual.
Select the Name from the LOVs for the Request for Detail Block.
3. Press the "Export Data" icon.
4. Integrator Page Appear with my Custom Integrator Name as "Appointment Letter - Contact Site".
5. Select the "Word 2003" from the View List. and Reporting is Checked.
6. Review the Folowing Enteries as:
Integrator Appointment Letter - Contact Site
Viewer Word 2003
Reporting Yes
Layout App. Letter Contract Site
Content XXHR_MBE_APP_LET_CONT_SITE_V
Session Date 2011/08/02
Mapping XXHR_MBE_APP_LET_CONT_SITE_V Mapping
7. Press "Create Document" Button.
8. It will open the Excel 2003 and then Word 2003. But no data down download from the Form.
9. It open the Mail Merge Letter but no Data is Display.
===========================================================
Note:
a. I am following the Steps from the Link:"http://apps2fusion.com/at/38-ss/351-generate-recruitment-letters-web-adi".
b. From the "Desktop Integrator Manager", "Oracle Web ADI", "HRMS Web ADI", it is working fine and Dowload the Data.
===========================================================
Thanks
Vishwa

Please try the solution in ("Function not available to this responsibility" Error While Cliclking On Forms Personalisation [ID 1263970.1]) and see if it helps.
Thanks,
Hussein

ReportViewer control used with a remote report does not display any data.

Hi there,
I have this .rdl report that runs just fine on our reporting server (I can see that when I try to run the report by accessing its URL in a browser). However, when I run it in my Windows-based application, I do not see any data. My report has two input parameters
and it needs to impersonate the caller's identity because the database uses Windows Authentication.
Here is the code I use:
var reportViewer = new ReportViewer();
// Set Processing Mode
reportViewer.ProcessingMode = ProcessingMode.Remote;
// Set report server and report path
reportViewer.ServerReport.ReportServerUrl = new Uri("http://MySsrsServer/reportserver");
reportViewer.ServerReport.ReportPath = "/Reports/MyReport";
// set the credentials
reportViewer.ServerReport.ReportServerCredentials.ImpersonationUser = WindowsIdentity.GetCurrent();
// create report parameters and set them in the report
var param1 = new ReportParameter("First_Param", "Some string");
var param2 = new ReportParameter("Second_Param", "Some other string");
reportViewer.ServerReport.SetParameters(new ReportParameter[] { param1, param2 });
using (var reportForm = new ReportForm(reportViewer))
reportForm.ShowDialog();
The ReportForm is just a regular Form that has a member of type ReportViewer. In the class' constructor, I assign the member:
public ReportForm(ReportViewer reportViewer)
InitializeComponent();
try
this.reportViewer = reportViewer;
reportViewer.SetDisplayMode(DisplayMode.PrintLayout);
reportViewer.Dock = DockStyle.Fill;
reportViewer.ZoomMode = ZoomMode.Percent;
reportViewer.ZoomPercent = 100;
reportViewer.RefreshReport();
catch (Exception exception)
MessageBox.Show(exception.Message);
Using database level tracing, we were able to confirm that the two Stored Procedures used by the report are called and they return correct and valid records. However, in the form nothing shows up:
Any suggestions?
TIA,
Ed

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

Event Management Datasources 0SCEM_1 ,2 ,3 not showing any data in RSA3.

Hi Experts,
I am trying to load SC Event Management data into BW.
On the source system side , I did following thins, Still I'm not finding any data in RSA3.
a) Use Tcode- /SAPTRX/BWGS and
i) Set the BW upload mode to V1 u2013 Direct Delta Upload
ii) Activate the BW upload for the extraction structures /SAPTRX/BWTFSEE, /SAPTRX/BWTFSEG, and /SAPTRX/BWTFSEH.
iii) You must generate the DataSources for all the extraction structures (/SAPTRX/BWTFSEE, /SAPTRX/BWTFSEG, and /SAPTRX/BWTFSEH) for which appends have been changed or created. To generate the DataSources, in the dialog structure, choose DataSources Generation for the relevant extraction structure. If you use the standard appends without modifications, you do not have to generate the DataSources.
b) Initialize set up tables for EM upload using Tcode- /SAPTRX/BWID
c) The three setup tables must be filled with the relevant data for the respective event handlers. This enables the initial data upload to SAP NW BI. The parameter for the BW upload has been set to u2018 u2019 for the BW Upload Rule. This indicator specifies that an initial upload is carried out. This is executed Tcode- /SAPTRX/TSC0TR.
d) Afterwards trigger the initial loading using Tcode- /SAPTRX/BWIU.This transaction sends the BWUPLOAD event to all the event handlers selected according to the
specified selection criteria. Note that even inactive event handlers can be selected. The system collects all the relevant data (according to the rules in the BW profile) for the selected event handlers (those for which the BWUPLOAD event has been reported) and stores the data in the three setup tables.
e) You must check if the parameter for the BW upload is set to delta upload using Tcode- /SAPTRX/TSC0TR
Still I'm not seeing any data in RSA3. Can any one please help me to extract the data into BW side.
Regards
Akki.

Hi,
You can below link from extraction , It may help.
http://wiki.sdn.sap.com/wiki/display/SCM/SAPEMIntegrationwithSAPNetWeaverBI
Regards,
Satya

Application Insights is not recording any data from the released version of my Windows Phone app

I released my first Windows Phone app a week ago, and Application Insights worked perfectly to collect usage data whilst in a debug build. However, the released version of the app is not returning any data at all. Is this a common problem for new apps or
is there a problem that I need to address?
I configured Application Insights for my app using the information on this guide - http://msdn.microsoft.com/en-us/library/dn509554.aspx
Any ideas or help would be greatly appreciated, thanks for your help.

Hi Bernard, thanks for your reply.
I tested the data using a release package of the Windows Phone app deployed directly to my phone from Visual Studio and the data appeared after around 10 minutes. However, once I published the exact same package to the Windows Phone Store and started using
the version downloaded from the store, no usage data has been uploaded even after several days of waiting.
I am using SDK 0.7.1 and Application Insights Tools for Visual Studio v1.3.2. The app is built for WP 8.0 and running on WP 8.1.
The instrumentation key is 757eeaff-605e-44a2-8eaa-6abf498bfcf5.
Thanks for your time and help, I really appreciate it.
Dan

DTP is not fetching any data eventhough data is there in psa

Similar Messages

Maybe you are looking for