DTP Load is not progressing for Particular DataPackage

Hi All,
I am facing a Problem in my DTP Load. I have triggered a DTP run.
It's having around 82 Datapackages and almost 80 datapackages completed Sucessfully.
Particular 2 Data package is running for longtime say 2 Hrs and its not passing after Extraction step.
When i check the Job Overview for that DTP run, the Job is finished and that 2 datapackeges have not have any information like "Processing of data package started"..
so Kindly help me in fixing this issue.
Thanks & Regards,
Gowri NK

Hi Gowri,
if your DTP is loading to an Infocube, check if the Index of the infocube is dropped. Because DTP is loading data packages in parallel it is possible that the DTP and the update of the Index block each other. Because this may cause a deadlock, the resulting dump can show up after Hours without you noticing it.
So my recommendation (at least if this is the problem):
Load by process chain:
1. Drop Index on Infocube
2. Start DTP
3. Create Index on Infocube.
Kind regards,
Jürgen

Similar Messages

Install for mountain lion is not progressing - for about 3 hrs now. It went to the launch pad and just has a dot, saying it is "downloading", but no progress. Shouldn't i get a "time remaining" somewhere?

Install for mountain lion is not progressing - for about 3 hrs now. It went to the launch pad and just has a dot, saying it is "downloading", but no progress. Shouldn't i get a "time remaining" somewhere?

The Download is about 4GB, it depends on how fast your internet connection is and how busy Apple computers are. Have you any way of checking if your Internet is downloading, I.E activity lights on you router. My Internet is 8Mb/s download and it took just over an hour to download earlier today.
I am not sure about a "time remaining"icon.

DTP error: Lock NOT set for: Loading master data attributes

Hi,
I have a custom datasource from ECC which loads into 0CUST_SALES. I'm using DTP & transformation which has worked for loading data in the past for this infoobject. The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes". I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7. Thanks in advance!

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

SAP workload monitor is not showing for particular date in Total Option

Hi,
In t. code ST03N (Work Load Monitor) data is not showing in option total for particular date but it is showing in all the instances.
Please support
Regards
Ganesh Tiwari

Hi Mamtha
Does the same navigation work directly in the backedn? In RSRT?
Pls try that, will halp narrow down your problem. WHether it is a data issue, whetehr it is a BW issue or whether it is a display issue.
Regards
Rajesh

Accrual Balance is not getting for particular leave

on 11.5.10.2
we have defined four leave in leave management system but on of the leave is not working properly in regards of getting accrual balance while using this function "per_accrual_calc_functions.get_net_accrual", although all plan getting balance but except one is not do this, how can we diagnose the problem for particular leave.
Could you please advice.

What is the problem? Is the leave balance zero when you don't expect it to be? Is the leave balance non-zero but calculating the wrong value? Or are you receiving an error message?
Please provide as much detail as possible.

Script sub window not opening for particular invoice

Hi Experts,
I am facing problem in my invoice script.That is for some invoice the Script Write form Rstxc-Tdclose = X so it is directly coming out from the window after opening.
For two invoices only i am facing this problem.
Here that particular window is not displaying for some invoices.main window other windows are working fine.
Please,Give me some suggestions where the rstxc structure updated in write_form.
Regards,
Nandha

Nandha,
Is thhis related to BW ?
maybe the ABAP forum would be of better help..
Arun

Loaded data not visible for Reporting?

Hi all,
In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
Thanks n regards
Girikumar

Hi Girikumar
Use the RSRV transaction and check the inconsistency of the cube ..If any inconsistency is there repair that with the repari option in the toolbar..
Let me knwo if it not resolved..
Bye
Shu Moh..

PO/ Invoice created for supplier does not exist for particular company code

Hi Gurus,
We have a case where PO created w.r.t supplier X does not exist for any company code A. Also Invoice is generated.
As per my analysis:
1. Purchasing organization is assigned to the particular plant and Plant does assigned to company code. This purchasing organization does not assigned to any company code and kind of centrally allowed to any company code based on above link.
2. Supplier X does exist for the purchasing organization. And in Partner function-For PI (Invoice presented) partner function, it is defined for another supplier Y. This Y supplier does exist for company code A and might be the reason, it is allowing creating PO and Invoice.
Please correct me, if I am wrong or If there will be any other reason for the same. Just for your information, there is no Info record exist for this PO as it is created for service without any material number.
Thanks for your response.
Best regards,
Karun Kumar

You can create vendor only with reference to purchase organization and withoout company code.
for this vendor, you can create PO and MIGO and system will allow but when you try to post the invoice system will prompt you to enter different invoice party. if you dont enter different invoice party, system will throw an error message "vendor is not defined in XXXX.
So in your case, your analysis is correct.

Wip for the wbs not found for particular month

Hi
What are the reason a wip not found for a wbs for a particular month while doing rrb billing ,while it is again found in the next month

hi
please chec in that particular WBS whether WIP - is defined or not in status profile.
in BS02.
balajia

User not authorized for particular Transaction.

While running a Custom Transaction I m getting error that user is not authorized for that transaction.
how to solve this?

Hi,
Try using FM C160_TRANSACTION_CALL. Let's see if this works.
OR
Create a custom program that calls your custom transaction code.
Hope this helps.
Benedict

DB Adapter not polling for particular table only

My DB Adapter for one particular table is not working. My WSDL and Scema are defined and deployed in same for every table adapter but dont know only this one has issue. I have created adapter again twice and deployed but it didnt work.
Please help me suggest the fix.
This is the error from my server logs:
Caused By: BINDING.JCA-12517
³¡Á¡ È°¼º ¿À•ù.
AdapterFrameworkImpl::endpointActivation - ³¡Á¡ È°¼º ¿À•ù.
¸®¼Ò½º ¾î´ðÅÍ Database AdapterÀÌ(°¡) ³¡Á¡ oracle.tip.adapter.db.DBActivationSpec:{DescriptorName=IN_JUO_CP_INFO.InJuoCpInfo, QueryName=IN_JUO_CP_INFOSelect, MappingsMetaDataURL=IN_JUO_CP_INFO-or-mappings.xml, PollingStrategy=LogicalDeletePollingStrategy, MarkReadColumn=PROC_RSLT, MarkReadValue=0, PollingInterval=30, MaxRaiseSize=1, MaxTransactionSize=10, NumberOfThreads=1, ReturnSingleResultSet=false}À»(¸¦) È°¼ºÈ¬ÇÒ ¼ö ¾ø´Â ÀÌÀ¯: JCA-09701
Error loading schemas from wsdl.
Error while loading schemas from wsdl file at location "servicebus:/WSDL/Enterprise%20Services/Business%20Services/032_MobileOfflineSubscription/IN_JUO_CP_INFO/IN_JUO_CP_INFO". The reason is Error loading schemas from wsdl.
Error while loading schemas from wsdl file at location "servicebus:/WSDL/Enterprise%20Services/Business%20Services/032_MobileOfflineSubscription/IN_JUO_CP_INFO/IN_JUO_CP_INFO". The reason is Namespace prefix 'xs' used but not declared..
Please verify the schemas defined in wsdl.
Please verify the schemas defined in wsdl.

Hi Anuj
Thanks for your reply. We have deployed all the adapters into the separate folders with same name as table name. These folders are created under folder Business Service and all the configuration files for that particular adapter are deployed there. I mean JCA binding, WSDL,schema XSD. I am pasting my JCA file for your referance which I created using JDeveloper
<adapter-config name="IN_JUO_CP_INFO" adapter="Database Adapter" wsdlLocation="IN_JUO_CP_INFO.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/IncomingDB" UIConnectionName="IncomingDB" adapterRef=""/>
<endpoint-activation portType="IN_JUO_CP_INFO_ptt" operation="receive">
<activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
<property name="DescriptorName" value="IN_JUO_CP_INFO.InJuoCpInfo"/>
<property name="QueryName" value="IN_JUO_CP_INFOSelect"/>
<property name="MappingsMetaDataURL" value="IN_JUO_CP_INFO-or-mappings.xml"/>
<property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
<property name="MarkReadColumn" value="PROC_RSLT"/>
<property name="MarkReadValue" value="0"/>
<property name="PollingInterval" value="30"/>
<property name="MaxRaiseSize" value="1"/>
<property name="MaxTransactionSize" value="10"/>
<property name="NumberOfThreads" value="1"/>
<property name="ReturnSingleResultSet" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>

Project gl_period_status not there for particular operating unit

Hi,
We try select Gl_period_status for Project applications.it is not showing particular operating unit.But other operating unit it showing project period.what could be reason.Any setup need.Please help me.
reg
sasikumar.r

Hi Viren,
Initially I have tried what you have said, but ERROR is coming as AS YOUR PREVIOUS DELTA IS INCORRECT, YOU CANNOT LOAD THIS DELTA. I am not getting any option of REPEAT DELTA.
"I have set to DELTA REPEAT in RSA7(ECC) , but after saving, it is again coming back to DELTA UPDATE."
As I am not getting REPEAT DELTA, to get that I tried saving the 0FI_GL_4 as DELTA REPEAT in RSA7 (ECC).
Please let me know any more information required.
Thanks,
Bindu.

PO Release Strategy not triggerred for particular Total Net Order Value

Dear,
I am currently facing the issue where release strategy for purchase orders is not getting triggered for a particular value or lower.
For order value 1 INR or less, no release strategy is triggered for new created PO. And for value > 1 INR release strategy is getting triggered.
All otehr PO characterstics are the same, I mean to say the values for other characterstics such as plant material group are identical.
But the characterstics for release for Total net order value are <= 30000 INR. There are two system copies, where in one system the same release strategy is working as expected. But in other system the above mentioned issue occurs. There is no differnce which I can see in the release strategy setup.
Please suggest for solution.
Thank you.
Warm Regards.

Dear All,
While looking further into the issue by going into debugging mode, we have found that in include LCLSCF2I, Internal table p_selection_criteria_tab , the value for ATFLV (Internal Floating point from) gets different values in the two systems. For example, in the affected system, for PO with 1INR tottal value, for one of the Total value chaaracterstics before INR characterstic, ATFLV value is 0,0000000000000000E+00, hence it gets out of loop and doesn't trigger release strategy.
But in another system for same PO values and release setup, ATFLV value is 1,0000000000000000E+00 for that characterstic.
May I know how the value for this field gets calculated.
Thank you.
Warm Regards.

Mysite is not opening for particular user

Hi,
We have configured User profile service application with permission to create mysite in our environment. One particular user is not able to open mysite. When try to open mysite it generate an unexpected error message and given correlation ID. When followed
the log file with reference to correlation ID. I found following error in ULS.
My Site: PersonalSpaceRedirect: Unknown error: System.Threading.ThreadAbortException: Thread was being aborted.
at Microsoft.SharePoint.Portal.WebControls.PersonalSpaceRedirect.RedirectToPublicPage(SPWeb web)
at Microsoft.SharePoint.Portal.WebControls.PersonalSpaceRedirect.LoadControl(Object sender, EventArgs a).
Please notice that this is for a single user so we dont to recreate the user profile service application for restore database. Any help is higly appreciated.
Regards,
Jitu

I am having the same issue. I traced it to a problem with the Microsoft.SharePoint.Portal.WebControls.PersonalSpaceRedirect part on default.aspx. I'm still not sure what the underlying issue is, though. This is in SharePoint 2013 SP 1.

RE: (load : class not found) for IE.5 browser

Hi
I try appletviewer example1.html
can do this class.
But use IE.5 browser can't try this class
show load : class Cor1 not found when mouse over it
(my class include "import javax.swing.*;")
Please help me
thanks a lot
David

Hi
thanks for your help
But I want make a html file include class
for every body view by internet
So I want to know
How let they can see my html file by IE.5 or Netscap. if they no Html converter?
David

DTP Load is not progressing for Particular DataPackage

Similar Messages

Maybe you are looking for