DTP run Time Error : Dump: Internal session terminated with a runtime error
Hi Experts,
I'm facing a problem during loading data from PSA to DSO from DTP. It gives Dump: "Internal session terminated with a runtime error".
When i went to PSA and see the no. of data packages, it is 1532.
Could anybody please help me how to load the data.
Thanks
Ajay
Thanks Srini!!
the load is running for 15 min and then it is throwing dump without a single package extract.
Ok...the same I'm also thinking to selective upload but can you please explain me how do i do that as it has only request in PSA.
and it is a pricing data.
Thanks
Ajay
Similar Messages
-
Internal session terminated with a runtime error(ITAB_DUPLICATE_KEY)
Hi All,
Process Chain is failing While loading data from ODS to Cube iam getting error in DTP level internal session terminated with a runtime error(ITAB_DUPLICATE_KEY).Here my source is CRM.
Can you please suggest me for this issue.
Thanks,
Mahes.hi Maheesh,
Runtime Error ITAB_DUPLICATE _KEY is resulted because of Duplicate Transfer Structures from different Logical Systems.
You can find the corresponding entries in the table RSISOSMAP ..On executing,we have the option to give the InfoSource name(ISOURCE) for wich the data load got failed with Runtime Error ITAB_DUPLICATE_KEY..
You can coreect this error by running the Program RSAR_RSISOSMAP_REPAIR in repair mode , the program first checks the RSISOSMAP table and corrects any incorrect entries found. A log is then written for the mappings that were corrected.
This will solve your problem.
Please refer to link mention in above thread for more detail i have just summarize the things :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a04c82eb-ec7c-2c10-7fae-ca6e764c483a?QuickLink=index&overridelayout=true
Thanks,
Deepak -
One of my exchange 2010 servers dpm agent is give the following error when the dpmra service attempts to start.
The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted..
I have tried uninstalling/reinstalling the agent but this does not resolve the issue
Any help would be greatly appreciated.
Thanks
William HicksonHi
Something has probably changed on the protected server side that affects the DPM agent. In some cases the DCOM configuration could change. Look at this blogpost and verify your DPMRA DCOM object.
http://robertanddpm.blogspot.com/2010/08/dpm-ra-rights.html
If this doesn't do the trick try reinstall the agent.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com -
PSADELETE process failure due to Internal Session Terminated.
Hi,
We have a PSADELETE process in Process chain which failed because of Internal Session Terminated error.
Now when i am trying to Repeat the process it is giving message Cannot activate job BI_PROCESS_PSADELETE (return code 8)
and the process is not starting again.
Please guide me the solution.
Thanks
SinghCan you check for more details in SM37 for the cancelled job log .
Do you have authorization to run 'repeat step ' ?
or display psadelete variant - identify the infopack/psa tables-> u can delete manually psa requests
Edited by: Srinivas on Jul 18, 2010 5:22 PM -
How to download run time ABAP dump in production environment
Hello,
I am getting run time ABAP dump in production environment. Please guide me onHow to download run time ABAP dump in production environment?
Also, please tell me how best can analyze that dump. Like there are tools like gdb, purify etc. to analyze problems in other languages.
Regards,
Sameer.Hi,
Go to ST22, and Double click on the error line, It will show you the detailed analysis.
See the section How to correct the error for details on error correction and the instructions to download the log( you can download in the format you want - HTML would be a nice option).
And there are no tools to analyze errors but ST22 has a large data regarding the location of the error, the reason and the source code which caused. So you need to use the debugger to reproduce the error and check the source code,
Regards
Karthik D -
SQL Server VSS Writer terminated with service-specific error 2147549183 (0x8000FFFF)
Hi Team,
SQL VSS Writer service terminated with service-specific error,
find SC query results, please advice wat;s the issue. Kindly note this service running fine for long time and suddenly stopped.
SERVICE_NAME: SQLWriter
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN))
WIN32_EXIT_CODE : 1066 (0x42a)
SERVICE_EXIT_CODE : -2147418113 (0x8000ffff)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
Regards,
Karthik
Thanks & Regards, Karthikeyanthis is part of a log error for example:
24 Info 2011/09/26 23:00 [Start SQL VSS Comman]
(NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
25 Info 2011/09/26 23:00 [Start SQL VSS Comman] WIN32_EXIT_CODE : 0 (0x0)
26 Info 2011/09/26 23:00 [Start SQL VSS Comman] SERVICE_EXIT_CODE : 0 (0x0)
27 Info 2011/09/26 23:00 [Start SQL VSS Comman] CHECKPOINT : 0x0
28 Info 2011/09/26 23:00 [Start SQL VSS Comman] WAIT_HINT : 0x7d0
29 Info 2011/09/26 23:00 [Start SQL VSS Comman] PID : 15532
30 Info 2011/09/26 23:00 [Start SQL VSS Comman] FLAGS :
31 Info 2011/09/26 23:00 Klaar met uitvoeren post-opdrachten
32 Error 2011/09/26 23:00 The writer vetoed the shadow copy creation process during the
backup preparation state. (VSS_WS_FAILED_AT_PREPARE_BACKUP)
33 Info 2011/09/26 23:00 Verwijderen tijdelijk bestand C:\Users\serveradmin\.temp\
1313680495583
34 Error 2011/09/26 23:00 Backup voltooid met fout(en)
This is what I look for usually from this log:
32 Error 2011/09/26 23:00 The writer vetoed the shadow copy creation process during the
backup preparation state. (VSS_WS_FAILED_AT_PREPARE_BACKUP)
Just post all the log messages if you can.
[Personal Site] [Blog] [Facebook] -
We've been able to successfully, automatically, deploy our MVC and WebApi to IIS7.5 on Win2008 R2, for some time now. Just this week the MSDeploy stopped working. The System event log shows this error when attempting to restart the Web Management
Service on the targeted Win200 R2 server:
The Web Management Service service terminated with service-specific error %%-2147483640.
The Application log shows this error at the same exact time the above error occurs.
IISWMSVC_STARTUP_UNABLE_TO_ACTIVATE_HWC
Failed to activate the Hostable Web Core (HWC). Web Management Service startup failed. Please reference the Win32 error in this event for further information. Exception:System.Runtime.InteropServices.COMException (0x8007007F): The
specified procedure could not be found. (Exception from HRESULT: 0x8007007F) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.Web.Management.Server.WebServer.Microsoft.Web.Management.Server.Interop.IWebServer.Start()
Process:WMSvc User=NT AUTHORITY\LOCAL SERVICE
The above error is preceded by this warning:
A listener channel for protocol 'http' in worker process '7164' serving application pool 'WMSvcAppPool' reported a listener channel failure. The data field contains the error number.
Which is preceded by this error:
Failed to find the RegisterModule entrypoint in the module DLL C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine.dll. The data is the error.
We've attempted to reach the target server using https://ourservername:8172/MsDeploy.axd. The response is:
Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection
Is this occurring because the port is blocked or because the Web Management Service is not running? (The Windows Firewall with Advanced Security dialog says the "Windows Firewall is off" and there are no entries in the firewall log (C:\Windows\System32\LogFiles\Firewall).
We've seen some posts that indicate the certificate may be the issue. Not sure how to actually tell if this is the case though. The CERT we have says it is valid thru 2029.Hi Nicola,
seems like your web service runtime is not configured correctly. Please check out the following SAP Notes:
Note 1043195 - Configuration of the Web service runtime
Note 1292171 - Troubleshooting Guide: ABAP Web Services Runtime
Kind regards
Heiko -
I am running Windows Vista 64 bit and i get a runtime error R6034 when i was updating itunes. How can i update itunes with out getting this error?
* Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"
App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore -
Hello, everyone
I've installed Lync Server 2010. There was no error during installation. But when i start Lync Server Front End Server, i'm getting following error:
The Lync Server Front-End service terminated with service-specific error %%-1008124893.
In event viewer:
The evaluation period for Microsoft Lync Server 2010 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2010 has expired.
I've upgraded Lync Server according to http://technet.microsoft.com/en-us/library/gg521005.aspx?ppud=4
Also I've installed all Lync Server updates.
But I still could not start Lync Front End Sever. How can I solve this problem?
ThanksHi,
Can you try to run
start-cswindowsservice -report c:\report.html
and post the report so we can have more information about your problem ?
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you -
*** ERROR = The Java VM terminated with a non-zero exit code.
DEAR MASTERS
after configuring SLD on integerated ABAP+JAVA server0 not starting
trc file: "D:\usr\sap\W55\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
node name : ID9278150
pid : 4140
system name : W55
system nr. : 00
started at : Sat Mar 21 08:45:23 2009
arguments :
arg[00] : D:\usr\sap\W55\DVEBMGS00\exe\jlaunch.exe
arg[01] : pf=D:\usr\sap\W55\SYS\profile\W55_DVEBMGS00_wipro5
arg[02] : -DSAPINFO=W55_00_server
arg[03] : pf=D:\usr\sap\W55\SYS\profile\W55_DVEBMGS00_wipro5
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=1060
arg[06] : -DSAPSYSTEM=00
arg[07] : -DSAPSYSTEMNAME=W55
arg[08] : -DSAPMYNAME=wipro5_W55_00
arg[09] : -DSAPPROFILE=D:\usr\sap\W55\SYS\profile\W55_DVEBMGS00_wipro5
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 4668] Sat Mar 21 08:58:30 2009
[Thr 4668] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 4668] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 4668] JLaunchISetClusterId: set cluster id 9278150
[Thr 4668] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 4668] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 4428] Sat Mar 21 08:59:58 2009
[Thr 4428] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 4428] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 4616] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 4616] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.Hi,
Please find the link below for J2EE start up problem.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e09e4a5e-8280-2a10-ca98-a59dd47d396d]
Please refer to following note for VM settings.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=723909]
Please also check the license validity on this server.
Hope this helps.
Manoj Chintawar -
How do I deal with a Runtime Error on Adobe Acrobat 9.5?
How do I deal with a Runtime Error on Adobe Acrobat 9.5? The instructions say to contact the support team but I have to pay in order to do so.
What operating system and what is the statement of the error. Typically you would first run a repair on Acrobat from the help menu (or in Windows you can do that from the Control Panel>Add/Remove Programs).
-
Job DIM_OBSERVER is getting canceled with with a runtime error UNCAUGHT_EXCEPTION
Dear Experts,
Job DIM_OBSERVER is getting canceled with with a runtime error UNCAUGHT_EXCEPTION. Below are the details of runtime error.
Category
ABAP Programming Error
Runtime Errors
UNCAUGHT_EXCEPTION
Except.
CX_UJA_ADMIN_ERROR
ABAP Program
CL_UJA_MD_QUERY_OPT===========CP
Application Component EPM-BPC-NW-ADM
Date and Time
02.08.2014 23:35:46
I am unable to find related note and solution for the same. any help would be much appreciated.
Thanks,
Akbar.Hi Akbar,
I believe this issue is coming up in BPC.
But could you please provide some more detailed information like when exactly(after performing which step) is this error occurring?
BR
Prabhith -
System recovery fails with C++ runtime error
My Compaq CQ610-410US running Windows 7 is unusable. When using system recovery, either from CD's or Recovery drive, it fails with C++ runtime library program not found Contact HP Support. EIther way, Windows is loaded and system recovery screens appear. Once I respond to removing all accessories it then fails with the runtime error. Two questions, (1) is there a way around it? (2) will getting new recovery discs from HP even work?
This question was solved.
View Solution.All I can suggest is to order a set from HP and hope they work. This error is not a common one and the HP supplied recovery discs should work.
-
Regarding Internal Session Termination
Hi Friends,
I have to end a particular internal session (Planning Area in my case) of the other user after a specific time, who is in change mode through a background job.If I use the function module u201CTH_DELETE_USERu201D,it is closing all the sessions of that user.But my requirement is to close only u2018SDPu2019 session without closing others.How can I do this?
I tried to delete based on mode number using function module u201CTH_DELETE_MODEu201D,but each time mode number is getting changed based on the sessions opened, so I am not even able to use thatu2026.Please suggest me any function module or bapi which meets the requirementu2026
Thanks in advance u2026u2026Hi,
check fm : TH_USER_LIST.
Check this sample code provided in 1 forum.
DATA: USRTAB LIKE UINFO OCCURS 1 WITH HEADER LINE,
MODE TYPE I,
OPCODE TYPE X.
CALL FUNCTION 'THUSRINFO'
TABLES
USR_TABL = USRTAB.
LOOP AT USRTAB WHERE BNAME = SY-UNAME.
IF USRTAB-TCODE = 'ME23'.
OPCODE = 25.
CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE
ID 'TID' FIELD USRTAB-TID.
ENDIF.
ENDLOOP.
Hope this helps to solve ur issue.
Thanks & regards. -
CTM Run failing with TSV_TNEW_PAGE_ALLOC_FAILED runtime error
Hi,
While doing the CTM run,system is giving the memory dump with run time error TSV_TNEW_PAGE_ALLOC_FAILED.
I understand this is because memory constraint and possible recommendation to either increase the Memory or reduce the master data selections for planning but would like to know if some master data discrepancy can cause the infinite run of CTM and hence memory dump like product at location being set as Inhouse production but no PPM maintained for it.
Any suggestions on this willl reward points.
Thanks,
Manish
Edited by: Manish Thukral on Jun 24, 2008 9:34 PMMarcelo,
Thanks for you reponse.Can you please share some more information on what explanation profile is and where it is set so that can I check.
Manish
Maybe you are looking for
-
Behaviour of AXIS with Spring and Java, in response to bad webservice call
This is a stretch, but I wonder if you can help me - I'm new to this, and working in a project that has already been configured to work with Axis. We have a Java project built with the Spring framework, in order to provide webservices for access via
-
Anyone know what this sign does?
Good morning all, Just a quick question. Ive tried googling this and checking my books but after an hour of doing so I just thought Id ask. Why would one use th (+) in a query, especially when joining two tables? I saw this: SELECT inv.item, inv.pric
-
License for sap netweaver 7.0 abap trial version not availble on given link
Hi ALL, I install sap netweaver 7.0 abap trial version almost three or four times and every time when i try to obtain a 90 days license for that by the link given in the installation guide, the sap system only shows only two options MBS for windows a
-
I've created a two buttons in a frame labeled "child." The instance name for one button is "orientationBtn" and the other is "stepBtn." When you click on the orientationBtn you are taken to a frame labeled "orientation" which holds a puzzle written i
-
Enhance LO extractors structure
Hi Is it possible to change structure of LO extractors on PRD system (added new fields) (using transport) without refilling setup tables? On DEV system I get message that I can't added new field to extractor when setup tables is full. Regards