DTP to load master data, gives the message 'No more data available'.
hi,
when i execute the DTP to load master data from DSO, it executes and gives the message 'No more data available'. The request is green but no data is transferred from the DSO to master data.
I want the DSO data to get into master data how do i do it?
Hi Hardik,
Since the request is green, there is no error in extraction. But, as they've rightly pointed out, the Update mode of the DTP must be Delta and there must not be any new Master data that you are looking for.
Compare the data and check if the Delta DTP should bring anything at all i.e. new records. If there are no new records, then the Delta DTP will not bring any more data. Else, change mode to Full and check again.
Reg,
Dhaval
Similar Messages
-
Error in DTP while loading master data
Hi Experts,
When Iam loading 0MAT_SALES attributes master data, the load is complete till PSA. But whicle executing DTP to reach its further data target "info object" I getting an error Data record 7632 ('030001DF2116VBG20V-M9B '): Version '030001DF2116VBG20V-M9B ' is not valid. I understand that the same key values exist in the field.
Iam also aware that if we check the tab "unique data records" in the update tab of DTP, it may be resolved.. but is this the right way to resolve this error? Or there is any other way to resolve this. Please help me to sort this.
Also, in the above error statement, how can i see the record no "7632" in the PSA maintenance srceen?
Points will be assigned.
Best Regards,
Geeta.Hi,
Once you identify the master data record because of which the load is failing go and check the Master Data table for 0MAT_SALES(P-Table).And check for the OBJVER for the particular record.
It might be happening that the same record exists in both M and A version(as you said data with same key exists)or the record might be in M Version.
In that case run a Attribute changerun for 0MAT_SALES.This should bring all the records in A version.Then repeat the load and check.It mite go through.
This might happen if there were changes in the Master data inthe last run and no change run was performed.
Regards,
Abhishek -
Hi All,
We have a DTP which will load data to Master Data Object from a DSO.
I have executed the DTP and its loading the data properly.
But, when the same DTP is being executed thru process chain, it is not all getting processed.
The process is yellow for a long time and even the request is also not seen in the Manage tab of master data.
Could anyone let me know what would be the problem.
Thanks,
Anjum.Hi ,
There are so many reasons for this but solutions are :
1.Delete the bad request and then reload again
2.All the work processors may be engaged so that it is taking long time to complete the process in this case u have to wait till the previous process gets over finished
3.Go to SM 37 and check
4.Kill the current job and the right at the process and press repeat
Assigning points is the way of saying thanks in SDN
Regards ,
Subash Balakrishnan -
DTP error: Lock NOT set for: Loading master data attributes
Hi,
I have a custom datasource from ECC which loads into 0CUST_SALES. I'm using DTP & transformation which has worked for loading data in the past for this infoobject. The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes". I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7. Thanks in advance!Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan -
What are the tables will update while loading Master data ?
Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar -
DTP running long time to load master data due to lock on SID table
Hi,
we are facing a problem while DTP loading master data into targets(Info Objects).
It is taking long time to load data due to below error.
18.03.2014 01:03:23 All records forwarded RSM2 730 S
18.03.2014 01:13:39 EXTRACTION OF DATAPACKAGE 000009 RSAR 051 S
18.03.2014 01:13:40 All records forwarded RSM2 730 S
18.03.2014 01:24:50 EXTRACTION OF DATAPACKAGE 000010 RSAR 051 S
18.03.2014 01:24:51 All records forwarded RSM2 730 S
18.03.2014 01:38:34 EXTRACTION OF DATAPACKAGE 000011 RSAR 051 S
18.03.2014 01:38:41 All records forwarded RSM2 730 S
18.03.2014 01:52:10 EXTRACTION OF DATAPACKAGE 000012 RSAR 051 S
18.03.2014 01:52:10 All records forwarded RSM2 730 S
18.03.2014 02:06:51 EXTRACTION OF DATAPACKAGE 000013 RSAR 051 S
18.03.2014 02:06:53 All records forwarded RSM2 730 S
18.03.2014 02:22:32 EXTRACTION OF DATAPACKAGE 000014 RSAR 051 S
18.03.2014 02:22:33 All records forwarded RSM2 730 S
18.03.2014 02:38:36 EXTRACTION OF DATAPACKAGE 000015 RSAR 051 S
18.03.2014 02:38:37 All records forwarded RSM2 730 S
18.03.2014 02:55:25 EXTRACTION OF DATAPACKAGE 000016 RSAR 051 S
18.03.2014 02:55:25 All records forwarded RSM2 730 S
18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE DBMAN 099 I
18.03.2014 03:13:56 TRUNCATE TABLE "/BI0/0600000066" DBMAN 099 I
18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00 DBMAN 099 I
18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE DBMAN 099 I
18.03.2014 03:13:56 LOCK TABLE "/BI0/0600000066" IN EXCLUSIVE MODE DBMAN 099 I
18.03.2014 03:13:56 NOWAI DBMAN 099 I
18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00 DBMAN 099 I
18.03.2014 03:13:58 EXTRACTION OF DATAPACKAGE 000017 RSAR 051 S
18.03.2014 03:13:59 All records forwarded RSM2 730 S
18.03.2014 03:34:24 EXTRACTION OF DATAPACKAGE 000018 RSAR 051 S
18.03.2014 03:34:25 All records forwarded RSM2 730 S
18.03.2014 03:56:03 EXTRACTION OF DATAPACKAGE 000019 RSAR 051 S
18.03.2014 03:56:03 All records forwarded RSM2 730 S
18.03.2014 04:19:55 EXTRACTION OF DATAPACKAGE 000020 RSAR 051 S
18.03.2014 04:19:56 All records forwarded RSM2 730 S
18.03.2014 04:44:07 SQL: 18.03.2014 04:44:07 ALEREMOTE DBMAN 099 I
18.03.2014 04:44:07 TRUNCATE TABLE "/BI0/0600000068" DBMAN 099 I
18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:02 DBMAN 099 I
18.03.2014 04:44:09 SQL: 18.03.2014 04:44:09 ALEREMOTE DBMAN 099 I
18.03.2014 04:44:09 LOCK TABLE "/BI0/0600000068" IN EXCLUSIVE MODE DBMAN 099 I
18.03.2014 04:44:09 NOWAI DBMAN 099 I
18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:00 DBMAN 099 I
18.03.2014 04:44:12 EXTRACTION OF DATAPACKAGE 000021 RSAR 051 S
18.03.2014 04:44:13 All records forwarded RSM2 730 S
For this long running data load we didnt find any short dumps and no locks available on SM12 also.
Please help on this.
Thanks,
Sankar.Can we know what kind of data source is this. attribute or text data source.
what is data volume? its less or more?
Actually we load direct access data thru dtp(No psa) into info objects for text data sources where have less data only.
While running your dtp is any attribute change run for the same info object ot any transactional loads are happening?
Is this happens on particular day or weekend or anydays?
Thanks -
Loading Master data using DTP's
Hi,
I have got a problem with loading master data,we use DTP's for loading it,but the requests were failing due to prior incorrect requests for that master data infoobject,inspite of the fact that Master data always overwrites and also the DTP's were full update enabled.
To load successfully we need to go and delete the previous requests all the time.
I think there must be some way of solving this problem,help from you all will be really appreciated.
Regards,
G.Monica Roja Flora.yeah you would need to delete the incorrect requests before you can load again. Though the master data is overwrite, with the incorrect request the status can never be A.
-
What are the steps for loading master data
Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
EvionHi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S -
on the zynga game, mafia wars, every time i click on something within the game a get a popup that says "Requested URL not found: 400" all pages load fine it just gives the message every time i click something, how can i stop this?
Sorry, the above thread should have been a "new" post, not a reply post.
-
A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?
That message is listed in two scripts on the bank's site. One function that can display the message is named PhotoRotator and the other is named PromoRotator. However, I can't seem to trigger the error myself.
If you have any add-ons that alter the page, such as ad blockers, try creating an exception for these sites and see whether that helps:
www.northrim.com<br>
www.northrimbankonline.com
You also could try this logon page: https://www.northrimbankonline.com/onlineserv/HB/Signon.cgi
(''Obviously you should be cautious about links offered on public forums to ensure you are not being phished! Check them out carefully before entering your username and password.'') -
Loading Master Data - Select the 'right' attributes
Hello everybody,
hopefully some expert can answer my question.
I want to load Master Data for the InfoObject 0CRM_PROD.
When I look at the tree beneath the 0CRM_PROD attributes following DataSources are listed:
- 0CRM_PRODUCT_ATTR
- 0CRM_PROD_ATTR (obsolete)
- 0CRM_PR_MAT_ATTR
- 0CRM_PR_REST_IN_ATTR
- 0CRM_TR_CONTROL_ATTR
- 0PRODUCT_ATTR (obsolete)
- 0PRODUCT_GENERAL_ATTR
- 0PRODUCT_STATUS_ATTR
- 0PR_BASE_UNIT_ATTR
- 0PR_COMMERCIAL_ATTR
- 0PR_IL_PROREF_ATTR
- 0PR_PROD_VAR_ATTR
- 0PR_PURCHASE_CATEG_ATTR
- 0PR_SALES_CATEG_ATTR
Now my question is which attributes for 0CRM_PROD do I have to load?
Are any of them mandatory or basic attributes?
And how do the attributes 0CRM_PRODUCT_ATTR and 0PRODUCT_ATTR differ from each other?
Thanks in advance!
ChrisHello,
The BW DataSources used in CRM 4.0 for the SAP product are replaced with new DataSources.
Please see the Note 673053 - SAP product: New DataSources in PI_BASIS 2004_1_640
Just for Reference
[Integration of SAP Products in SAP BW|http://help.sap.com/saphelp_nw04/helpdata/en/f8/580f40763f1e07e10000000a1550b0/content.htm]
Thanks
Chandran -
While loading master data into PSA, the eorror is 'Error from PSA"
Hi All,
While loading master data into PSA, the eorror is 'Error from PSA"
Could you anybody please help in this reagard.
Thanx,
Sridhar.Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj -
Error while loading master data to attribute ZMAJORGU(Major organisational unit)
Hi Experts,
While loading master data to ZMAJORGU(MOU)(info object texts) from datasource (ZOS_HRP1000)datasource iam getting error in DTP.
below is the error...
Diagnosis
Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
the attribute/characteristic ZMAJORGU &.
System Response
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This
allows you to maintain your master data.
Please find the below screen shots
I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest value i could find in both the fileds was was AVP Shipment .
I have the following questions
1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
Please find the attached PSA data file (u have to convert it to Excel)
I request people to help me analyse the issue and fix the issue.
Regards
KiranRam
I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres like smallof caps or numeric... why on this record is creating an issue...
please have a look at error stack
and i have one more question when i look at PSA there are close to 300000 records
but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA.. -
Where to set lock while loading master data attributes
Hello Experts,
I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
Here what exactly LOCK means?
Thanks in advance.
Zakir Khan.Hi,
The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
In your case you and schedule the DTP one after another.
Thanks -
Error 0 update while loading master data
Hi,
Iam facing a problem while loading master data.Data has comes to PSA but it getting failed to load into infoobject it is showing the error " error in the 0 update".
Ihave tried for manual update, even though it is showing same problem .masterdata 0material is copy back from production to Quality.presently iam uploading data in quality.can anybody give your valuable suggestions.
Thanks & Regards,
Mahi.I've a compounding characteristic in this characteristic.
And the master data loading was fine yesterday but today it doesn't work.
When I check with rsrv this characteristic, a dump with message:
Error in ABAP application program.
The current ABAP program "SAPLRRSI" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "GP47HH4A9VROVK98YR0TT9S7TQ5 ", the following syntax error occurred
in the Include "GP47HH4A9VROVK98YR0TT9S7TQ5 " in line 25:
"Field "/BIC/MZCATWRT" is unknown. It is neither in one of the specifie"
"d tables nor defined by a "DATA" statement. "DATA" statement."
So I think something is wrong in this Char.
But what can I do for that?
Thanks a lot for all idea.
Juan
Maybe you are looking for
-
Muse mobile site doesn't display full width
The mobile version of my site doesn't display full width. It doesn't scale to fit the mobile screen as the set up width in Muse. I found a tip talking about add "viewport" code to muse site. When I insert the code to html window, it give me a box sai
-
Keywords not showing up after upgrade to LR2
Hello everybody, I've got a big problem within lightroom (2.6). In my keyword list, when i select a keyword (to see the photos with that keyword) all my photos in the catalog pops up. For example there is a keyword with 4 photos in it. When i clic
-
ABAP Development Video legal question
Dear Community, We would like to create something like a video tutorial for ABAP development for the beginner level based on the flight data model. We might simply put it on our websites unrestriced area, membership area or we might sell this as a pr
-
Subscribed calendar does not disappear after deletion
Hi, I recently deleted a subscription to a calendar on my iPhone, but all the events are still present in my iCloud. So how can I get rid of them?
-
Hi all, I am uploading 10 records in to sap . By using call transaction method . But after insertion of 5 record server suddenly shutdown. Then what happens . What we have to do and what about the updated 5 recs as well as remaining 5 recs. And if