DTP to load Master Data

Hi All,
We have a DTP which will load data to Master Data Object from a DSO.
I have executed the DTP and its loading the data properly.
But, when the same DTP is being executed thru process chain, it is not all getting processed.
The process is yellow for a long time and even the request is also not seen in the Manage tab of master data.
Could anyone let me know what would be the problem.
Thanks,
Anjum.

Hi ,
There are so many reasons for this but solutions are :
1.Delete the bad request and then reload again
2.All the work processors may be engaged so that it is taking long time to complete the process in this case u have to wait till the previous process gets over finished
3.Go to SM 37 and check
4.Kill the current job and the right at the process and press repeat
Assigning points is the way of saying thanks in SDN
Regards ,
Subash Balakrishnan

Similar Messages

  • DTP to load master data, gives the message 'No more data available'.

    hi,
    when i execute the DTP to load master data from DSO, it executes and gives the message 'No more data available'. The request is green but no data is transferred from the DSO to master data.
    I want the DSO data to get into master data how do i do it?

    Hi Hardik,
    Since the request is green, there is no error in extraction. But, as they've rightly pointed out, the Update mode of the DTP must be Delta and there must not be any new Master data that you are looking for.
    Compare the data and check if the Delta DTP should bring anything at all i.e. new records. If there are no new records, then the Delta DTP will not bring any more data. Else, change mode to Full and check again.
    Reg,
    Dhaval

  • Error in DTP while loading master data

    Hi Experts,
    When Iam loading 0MAT_SALES attributes master data, the load is complete till PSA. But whicle executing DTP to reach its further data target "info object" I getting an error Data record 7632 ('030001DF2116VBG20V-M9‚B '): Version '030001DF2116VBG20V-M9‚B ' is not valid. I understand that the same key values exist in the field.
    Iam also aware that if we check the tab "unique data records" in the update tab of DTP, it may be resolved.. but is this the right way to resolve this error? Or there is any other way to resolve this. Please help me to sort this.
    Also, in the above error statement, how can i see the record no "7632" in the PSA maintenance srceen?
    Points will be assigned.
    Best Regards,
    Geeta.

    Hi,
    Once you identify the master data record because of which the load is failing go and check the Master Data table for 0MAT_SALES(P-Table).And check for the OBJVER for the particular record.
    It might be happening that the same record exists in both M and A version(as you said data with same key exists)or the record might be in M Version.
    In that case run a Attribute changerun for 0MAT_SALES.This should bring all the records in A version.Then repeat the load and check.It mite go through.
    This might happen if there were changes in the Master data inthe last run and no change run was performed.
    Regards,
    Abhishek

  • DTP running long time to load master data due to lock on SID table

    Hi,
    we are facing a problem while DTP loading master data into targets(Info Objects).
    It is taking long time to load data due to below error.
    18.03.2014 01:03:23 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:13:39 EXTRACTION OF DATAPACKAGE 000009                                                                  RSAR          051          S
    18.03.2014 01:13:40 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:24:50 EXTRACTION OF DATAPACKAGE 000010                                                                  RSAR          051          S
    18.03.2014 01:24:51 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:38:34 EXTRACTION OF DATAPACKAGE 000011                                                                  RSAR          051          S
    18.03.2014 01:38:41 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:52:10 EXTRACTION OF DATAPACKAGE 000012                                                                  RSAR          051          S
    18.03.2014 01:52:10 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:06:51 EXTRACTION OF DATAPACKAGE 000013                                                                  RSAR          051          S
    18.03.2014 02:06:53 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:22:32 EXTRACTION OF DATAPACKAGE 000014                                                                  RSAR          051          S
    18.03.2014 02:22:33 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:38:36 EXTRACTION OF DATAPACKAGE 000015                                                                  RSAR          051          S
    18.03.2014 02:38:37 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:55:25 EXTRACTION OF DATAPACKAGE 000016                                                                  RSAR          051          S
    18.03.2014 02:55:25 All records forwarded                                                                             RSM2          730          S
    18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 03:13:56 TRUNCATE TABLE "/BI0/0600000066"                                                                  DBMAN         099          I
    18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00                                                             DBMAN         099          I
    18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 03:13:56  LOCK TABLE "/BI0/0600000066" IN EXCLUSIVE MODE                                                   DBMAN         099          I
    18.03.2014 03:13:56 NOWAI                                                                                             DBMAN         099          I
    18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00                                                             DBMAN         099          I
    18.03.2014 03:13:58 EXTRACTION OF DATAPACKAGE 000017                                                                  RSAR          051          S
    18.03.2014 03:13:59 All records forwarded                                                                             RSM2          730          S
    18.03.2014 03:34:24 EXTRACTION OF DATAPACKAGE 000018                                                                  RSAR          051          S
    18.03.2014 03:34:25 All records forwarded                                                                             RSM2          730          S
    18.03.2014 03:56:03 EXTRACTION OF DATAPACKAGE 000019                                                                  RSAR          051          S
    18.03.2014 03:56:03 All records forwarded                                                                             RSM2          730          S
    18.03.2014 04:19:55 EXTRACTION OF DATAPACKAGE 000020                                                                  RSAR          051          S
    18.03.2014 04:19:56 All records forwarded                                                                             RSM2          730          S
    18.03.2014 04:44:07 SQL: 18.03.2014 04:44:07 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 04:44:07 TRUNCATE TABLE "/BI0/0600000068"                                                                  DBMAN         099          I
    18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:02                                                             DBMAN         099          I
    18.03.2014 04:44:09 SQL: 18.03.2014 04:44:09 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 04:44:09  LOCK TABLE "/BI0/0600000068" IN EXCLUSIVE MODE                                                   DBMAN         099          I
    18.03.2014 04:44:09 NOWAI                                                                                             DBMAN         099          I
    18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:00                                                             DBMAN         099          I
    18.03.2014 04:44:12 EXTRACTION OF DATAPACKAGE 000021                                                                  RSAR          051          S
    18.03.2014 04:44:13 All records forwarded                                                                             RSM2          730          S
    For this long running data load we didnt find any short dumps and no locks available on SM12 also.
    Please help on this.
    Thanks,
    Sankar.

    Can we know what kind of data source is this. attribute or text data source.
    what is data volume? its less or more?
    Actually we load direct access data thru dtp(No psa) into info objects for text data sources where have less data only.
    While running your dtp is any attribute change run for the same info object ot any transactional loads are happening?
    Is this happens on particular day or weekend or anydays?
    Thanks

  • DTP error: Lock NOT set for: Loading master data attributes

    Hi,
    I have a custom datasource from ECC which loads into 0CUST_SALES.  I'm using DTP & transformation which has worked for loading data in the past for this infoobject.  The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".  I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7.   Thanks in advance!

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

  • Loading Master data using DTP's

    Hi,
            I have got a problem with loading master data,we use DTP's for loading it,but the requests were failing due to prior incorrect requests for that master data infoobject,inspite of the fact that Master data always overwrites and also the DTP's were full update enabled.
             To load successfully we need to go and delete the previous requests all the time.
    I think there must be some way of solving this problem,help from you all will be really appreciated.
    Regards,
    G.Monica Roja Flora.

    yeah you would need to delete the incorrect requests before you can load again. Though the master data is overwrite, with the incorrect request the status can never be A.

  • Error while loading master data to attribute ZMAJORGU(Major organisational unit)

    Hi Experts,
    While loading master data to  ZMAJORGU(MOU)(info object texts) from  datasource (ZOS_HRP1000)datasource iam getting error in DTP.
    below is the error...
    Diagnosis
        Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
        the attribute/characteristic ZMAJORGU &.
    System Response
        The system has recognized that the value mentioned above is invalid, and
        has processed this general error message. A subsequent message may give
        you more information on the error. This message refers to the same
        value, even though it does not state this explicitly.
    Procedure
        If this message appears during a data load, maintain the attribute in
        the PSA maintenance screens. If this message appears in the master data
        maintenance screens, leave the transaction and call it again. This
        allows you to maintain your master data.
    Please find the below screen shots
    I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
    I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
    'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest  value i could find in both the fileds was was AVP Shipment .
    I have the following questions
    1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
    2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
    Please find the attached PSA data file (u have to convert it to Excel)
    I request people to help me analyse the issue and fix the issue.
    Regards
    Kiran

    Ram
    I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres  like smallof caps or numeric... why on this record is creating an issue...
    please have a look at error stack
    and i have one more question when i look at PSA there are close to 300000 records
    but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
    Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

  • Error while loading master data.

    I am facing error while loading master data in a infoobject.
    The error comes when I run DTP fo rloading data from PSA to infoobject.
    The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
    Please help me in understanding this Version errror and suggest a solution for this.

    SAP metodology integration MDM & BW you can look at:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
    You can turn matching strategy in MDM Data manager for delete dublicate of records
    and then use MDM Syndicator for export data to file and then load that file to BW
    If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
    in BW every record has unique key.
    also you can use MDM ABAP or Java API for delete dublicate of records
    Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

  • BI 7.0 - Duplicate Record Error while loading master data

    I am working on BI 7.0 and I am trying to load master data to an info object.
    I created an Infopackage and loaded into PSA.
    I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
    I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
    My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
    I would appreciate your help to resolve this issue.
    Regards,
    Ram.

    Hi,
    Refer:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • Where to set lock while loading master data attributes

    Hello Experts,
    I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
    When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
    Here what exactly  LOCK means?
    Thanks in advance.
    Zakir Khan.

    Hi,
    The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
    In your case you and schedule the DTP one after another.
    Thanks

  • Issue in loading master data in BI 7.0

    Hi,
    I fail to understand how to load master data in BI 7.0. Can you please fill in the steps.
    1. Created an Infoarea.
    2. Created 2 infoobject catalogs ( for char and kf)
    3. Created characteristics like empname and month and salary as KF.
    4. For empname, attached the attributes dept and address (master data).
    Now what steps should I follow to load master data of all employees and what should be my flat file format ?
    thanks

    RSA1 - D Cclick on FlatFile Source System - RClick on the App  Comp - Create Datasource of type - Master Data Attributes - Enter the required - Read the File in Extraction Tab - Field Tab - Add Infoobjects already Created under Infoobject Column - Check the Preview to see it shows data fine - Activate the datasource
    Create Transformation btn Datasource and Infobject - Activate it
    Create Infopackage on Master Attr Datsource - Run it
    Create DTP - Run it to load from PSA to IO

  • Is it possible to load master data without making object as infoprovider

    Hi
    Is it possible to load master data or text data without making the infoobject as a data provider in BI7.0.
    If yes please tell me the process.
    Regards
    Tulasi

    Hi
    YEs you ca do..
    1) RIght click on master data in infosources tab and then say DTP -> give Datasource name -> transformations would genetared automatically.
    Also this has been discsussed in many forums..search on SDN or let me knw if you are still facing issues.
    thanks for points assigned

  • HOW to load Master data

    Can I not load Master data, that is Text directly to infoObject.
    Now I load Text to a custom infoObject from a flat file.
    Infopack puts data in PSA, Then dont I need a DTP to put data into infoObject.
    Now when I try to create DTP it will say it will need a transformation and it will create it. Now when U execute DTP it is failing because infoObject is not an inforprovider.
    Once InfoObject is in an infoarea that it is good to go.
    Now I dont want the infoObject to be infoprovider. How can I load directly to master data tables of the infoObjects.

    Hi GMAN
    In BI7.0, You can use "Old" data source, that can upload into master data directly.
    If you want to use "Old" one, change back your data source to 3.x data source.
    For more details, see below links.
    Datasource or Datasource 3.x
    Hanna

  • To Load Master Data From Two Source System

    Hi All,
    I have a small question :
    - Can we load master data from two different source system say from flat file and R3 or any two different or similar source  system?
       If answer is "Yes", then how?? If possible step by step.
    Appreciate your valuable points.
    Thanks,
    Niraj Sharma

    Hi,
    Still i have problem.R3 Transformation and DTP is getting activated but when i am executing DTP for flat file,
    I am getting below ERROR.
    Object DTP DTP_d55.......could not found in version A.
    I have  checked the Master data locally for source sys in compounding Tab of the key field.
    Please help..
    Thanks,
    Niraj

  • QM action not allowed for DTP requests in master data and Text tables

    Hi,
    I have a master data object load request which has failed, returned error in st22 and job finished.
    BUT the request has not turned red in the monitor - it's still yellow. That means that I can not delete request nor start new load to infoprovider because it believes a request is still running. But it's not, I've checked both sm37, sm50 etc.
    When trying to manually change QM status to 'red' it says 'QM action not allowed for DTP requests in master data and Text tables'
    How can I force QM status to red so that I can move on?
    Running NW2004s BI (7.0) Patch 15.
    I searched for this question but there is no answer
    Thank you

    Folks
    I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
    When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
    All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
    Hope this helps.
    Thanks

Maybe you are looking for

  • Multiple users on one itune account

    Help.  My Iphone and my daughter's phone have now merged.  I am getting some messages designated for her and all her contacts are in my phone.

  • ME21N - restriction by Material Type

    Hi Team I need to restrict ME21N by Material Type. The only authority checks set are: M_BEST_BSA M_BEST_EKG M_BEST_EKO M_BEST_WRK In SU24, M_MATE_WRK, is set as follow: Check indicator: "check" Proposal: "no" How I can use this object to restrict by

  • I cant buy in app pls help me

    hi now , i cant buy in app . have notice : in app purchase failure my visa have usd i contact bank , they said everything good and i must have question apple for problem pls check my idapple and can fix problem ? im really my acc , visa and app i nee

  • Interface not working properly after Reciever system R3  refresh

    Hello All, We have an sender interface (JDBCSenderCod) for which there are two reciever systems(R3--RP1 & RY1).Two days back there was system refresh perfomed from RP1 (Live production) to RY1(test system).After that for only one system RP1 the messa

  • ITunes 7.6.1.9 Won't work on Vista Home Premium

    Need someones help. Bought an IPOD and trying to install ITunes for the first time. Appears to install correctly, but ITunes and QuickTime won't open. Immediate error states "Itunes QuitTime Player or Itunes has quit working." I've re-installed the p