DTP to Open Hub - How to delete failed previous request?

I have instituted the use of an open hub destination to export data to a csv file using a process chain.
Occasionally, the attempt fails and subsequent runs of the process chain also fail because the previous attempt is "red".
Is there any way to specifically delete the failed request from within the process chain?
The error message speaks of setting the "Automatically Repeat Red Requests in Process Chains" indicator, but I have not found it!
I will award points to helpful solutions.
Thank you in advance.
Andy

Thanks YJV.
But what I am asking is how to embed this in a process chain so that each time it runs, it first deletes all previous requests.  There is such a command for regular DTP's but not for the ones that export to open hub.  At least they do not appear in the F4 list when trying to generate this command in the process chain.
Therefore, I am still looking for either the mentioned indicator which can be set for (all) DTP's or for a way to delete all related requests from within a process chain.
Andy

Similar Messages

  • How to delete the previous request in Cube ?

    Hi All
      I have 2 sources loaded to Cube..
    Ex:
    ODS A --> Cube 1
    ODS B --> Cube 1
    Today they 31.10.2011 for both  in CUBE1
    so it becomes...
    ODS A --> Cube 1 --> 31.10.2011
    ODS B --> Cube 1 --> 31.10.2011
    tomorrow they load... CUBE 1 shld be..
    ODS A --> Cube 1 > 31.10.2011--
    DELETED
    So finally my cube has only following requests..
    ODS B --> Cube 1 --> 31.10.2011
    ODS A --> Cube 1 --> 01.11.2011
    ODS B --> Cube 1 --> 01.11.2011
    ODS A request which is older than 1day must be deleted before loading the next day...
    Can I use DELETE OVERLAPPING requests for this requirement? I am not too sure...what are the steps to be created..?
    as I tried but it was not successful.
    can anyone help me with IDEAS or steps??
    thanks a lot

    yes, you are right. You should use Delete overlapping request option.
    If it is not working, please let us know what option did you select for overlapping request deletion, may be you missed something there because overlapping request deletion is the best fit for your requirement.
    One thing you need to make sure that loads on both the days are done through PC only.
    If you do a manual load on 31.10.2011 and then PC loads data on 01.11.11, overlapping request deletion step will not delete the request loaded manually on 31st but if loads are done throught PC only, there should not be a problem.
    Regards,
    Gaurav

  • How to delete 100+ released requests from the import queue?

    Hello
    How to delete 100+ released requests from the import queue?
    One by one or there is more convinient way?
    Thanks

    To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
    1) Highlight the status field of the import queue.
    2) Sort the import queue by the status.
    3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
    4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
    5) Go to menu option Request > Delete.
    If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

  • How to delete a single request from DSO in BI 7.0

    Dear Experts,
    Could you please tell me how to delete a single request from DSO?
    I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
    Please suggest me this issue.
    Regards,
    Prathap

    IN DSO--its a very basic thing....
    ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
    So ,each new request has a realationsip with the older request.
    So in the cases:
    1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
    e.g older request  entries:
    a x 1
    new request
    a x 2
    change log
    a x 1
    a x -1
    a x 2
    so its quite obvious you can't have  a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
    2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
    I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
    thats request reverst posting
    IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
    regards,
    rk

  • How to delete the Transport Request?

    Hi all,
       I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
    Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
    Regards,
    Nagesh Ganisetti.

    I am not sure I understand.
    You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
    Transports will be configured in all the systems in your landscape (including production).
    Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
    Added -
    I now see that the request is in production.
    Igore the above in that case.
    If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
    When you try to delete, what message do you get?
    Message was edited by: Ajay Das

  • How to delete the duplicate requests in a cube after compression.

    Hi experts,
        1. How to delete the duplicate requests in a cube after compression.?
        2. How to show a charaterstics and a keyfigure side by side in a bex query output?
    Regards,
    Nishuv.

    Hi,
    You cannot delete the request as its compressed as all the data would have been moved to E table ..
    If you have the double records you may use the selective deletion .
    Check this thread ..
    How to delete duplicate data from compressed requests?
    Regards,
    shikha

  • How to delete the compressed request in bi 7.0?

    how to delete the compressed request in bi 7.0?
    Reverse Posting option available in BI 7.0?
    Thanks,
    Pramod

    Hi Pramod,
    Check this Thread,
    Re: Selective deletion after compression
    before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
    Hope this helps..........

  • How to delete multiple yellow request in PSA

    I am in BI7 and I have to delete the all the request present in PSA But in my PSA there are around more than 500 request which are in yellow status.Please suggest how to delete all the request in one go ,Since it very cumbersome to change status of every request to red and then delte it

    Hi,
    Debjani thanks for your reply,
    It helped me
    I have first deleted the contents from PSA table and
    then I have searched for request in RSTSODSREQUEST but this table does not contain that requests
    then i have got another  table RSREQDONE  whcih contains that request so I have deleted  request from that table.
    Final solution is
    Go to SE14 >> Give the PSA Table name >> delete it
    Then delete the requests from the table RSTSODSREQUEST/RSREQDONE

  • How to delete unreleased transport request where the objects are locked

    Hi Experts,
      I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

    Hi,
    First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
    Than go to se10 and delete what you want.
    I hope it helps.
    Bulent

  • When Forwarding, how to delete ALL previous Senders and Addressees?

    When Forwarding, how to delete ALL previous Senders and Addressees?

    When you forward an email, it will be sent to any previous addressees, only whomever you choose to forward it to. If you are referring to text in the email body that includes previous address information, simply edit it before sending.

  • Can i delete the Previous request and create the new request for loading

    Dear Experts,
    I use 0FIGL_V40.Cube in my system. These Cube does not contain delta capability.i mean for every time i wil load Full only.
    Here my question is  the first day  load full load,and second day i want to load the data.But can i delete the previous request and load the data with new request.
    Please guide me .
    Regards,
    Srinivasan.

    Hi Srinivasan,
    I hope the DS itself is not Delta enabled. If so i think you can delete the contents of PSA. This step can be added in the Process chain before actually loading the FULL IP to DS. Then you can include a step to "Delete Entire data from DataTarget" step in the process chain before actually loading the DTP(Can be Delta/FULL. I dont think there is any impact here since both will bring only one request from DS to DataTarget since PSA will have only one request) from DS to Cube.
    Hope it helps!
    Regards,
    Pavan

  • Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

    Hi all,
    We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded. 
    I understand we could use logical file for this purpose.  However we are not sure how to have the period and year to be dynamically derived in filename.
    I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename".  However i could not seem to be able to get document from the link given. 
    Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
    Many thanks and best regards,
    Victoria

    Hi,
    After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths'  then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of  physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
    however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
    hope this helps u to some extent.
    Regards

  • Open Hub: How extract Real Data and Header Data in the same .CSV?

    Hi guys, I need to extract the ODS data (I'm on BW 3.5) to a flat file. i thought about using Open Hub Service, but in SAP Help info I found that it generates 2 files: One with real data from ODS and the second is a Meta Data file with Header (names of the columns...etc)
    I need generate one file with the first row being a header, do you know how could I do it??
    Thank you and Cheers?

    Could you give me an example of this update rutine?

  • How to delete failed activation activity????

    Hi Friends,
    I have 2 activites, lets say first one is ABC and second one is XYZ.
    I have created ABC activity first, and then i tried to activate it. Due to some missing jar, it failed.
    Now i tried to fix that in that process i need to create second activitey XYZ. Now, when i try to activate XYZ, i am seeing ABC activity too for activation being it called as Predecessor.
    Now, when i tried to activate with only option of 'activate with all predecessors', it is failing coz of ABC problem even when i fixed it in the next activity XYZ.
    Could anyone pls let me know how to delete the activity which is already checked-in and failed at activation.
    If i can delete the ABC activity then i can activate the XYZ activity.
    Pls let me know..
    Thanks,
    Raghavendra Pothula

    It is not possible to delete checked-in (closed) activities. Unable to activate coz of pre-failed activity.

  • How to delete cube old request by using abap code?

    Dear experts,
    Here is one thing need your help:
    We have one cube need to delete the old request. This cube is loaded daily and only need to delete the request of that month.
    I know there is one "Delete Overlap Requet" type in the process chain, but my concern is: in our DTP filter, different day the selection will have different values, let's say A and B, and A and B are not even overlap at all.
    So my question is:
    1. Can I still use "Delete Overlap Request" to delete the old request?
    2. If so, I see it can be implemented by abap routine, can anyone give me some sample code? Like how to delete request only in this month. And how to delete request whose selection is equal to a specific value.
    Note: one of the source cube is real time cube so can not delete the request from infopackage.
    Any post will be appreciated and thank you all for your time in advance!
    Regards.
    Tim

    Here is the intial code when I choose "Request Selection through Routine", please help me on how to choose the specific request and delete them in this routine.
    program conversion_routine.
    Type pools used by conversion program
    Global code used by conversion rules
    $$ begin of global - insert your declaration only below this line  -
    TABLES: ...
    DATA:   ...
    $$ end of global - insert your declaration only before this line   -
        InfoCube        = ZPC_DEL_REQ_ZBPS_C01
    form compute_ZPC_DEL_REQ_ZBPS_C01
      tables l_t_request_to_delete structure rsreqdelstruc
      using l_request like rsreqdone-rnr
      changing p_subrc like sy-subrc.
    *Insert Source Code to decide if requests should be deleted.
    *All Requests in table l_t_request_to_delete will be deleted
    *from Infocube ZPC_DEL_REQ_ZBPS_C01.
    *Add new requests if you want to delete more (from this cube).
    *Remove requests you did not want to be deleted.
    $$ begin of routine - insert your code only below this line        -
         loop at l_t_request_to_delete.
         endloop.
         clear p_subrc.
    $$ end of routine - insert your code only before this line         -
    endform.

Maybe you are looking for