DTP Transports During BDLS

Hi,
    Does anybody know why does the system prompt for transport request for DTP's when running BDLS(Logical System Conversion)...?
Thanks
Praveen

Hi Praveen,
always DTP technical names are system defined. as system is getting refrished it is deleting older DTP with replacing new technical name.
Thanks
Laskhmi narayana

Similar Messages

  • Risks for ongoing Dev-Transports during SP & EhP Upgrade

    Hello together,
    We are planning at the moment a Support and EhP upgrade for our whole SAP system landscape. We have one centrally ERP 6.0 System where at the moment all affiliates will be migrated into one client. So we have ongoing Roll-Out projects until 2012. During this Roll-Outs we want to Upgrade our SAP ERP system landscape with the relevant Support Packages and EhP 5 in the mid of the next year.
    My question is, how should or must we handle the transports, if we want to implement the Support Packages and EhP in parallel to the ongoing Project Transport. If there are some objects affected of new objects coming up from the EhP Packages and affected also from development-transports from the projects. I think that could be a risk that the queue in the Q-System is not valid an we get an surprise in the productive system after transporting all transports form the Support packages and EhP Packages within the Project relevant transport in the P-environment.
    So, how should or must we handle the Transports during this time incl. emergency Transports to keep always a valid transport queue in the Q-System for the P-System and to avoid an overtaking of Transports.
    Thanks in advance for best practice, documentation and answers.
    Best regards
    Stefan Krogmann

    As long as you don't activate additional functionality in the source/DEV system transports should be smooth. However, it's always advised as with support packages installations to keep the gap between DEV/QA/PRD as short as possible.
    Markus

  • Dump during BDLS (Refresh BW)

    Hello,
    We are currently working on a BW refresh and during the BDLS we get the following dump:
    Category                       ABAP Programming Error
    Runtime Errors              OBJECTS_OBJREF_NOT_ASSIGNED
    ABAP Program              SAPLRSBK_AFTER_IMPORT
    Application Component   BW-WHM-DST
    Date and Time               10.04.2014 01:47:55
    Access via 'NULL' object reference not possible.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLRSBK_AFTER_IMPORT" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: " ").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
    How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED" " "
    "SAPLRSBK_AFTER_IMPORT" or "LRSBK_AFTER_IMPORTF02"
    "DTP_CONVERT_AFTER_LS_CHANGE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
        SAP Release..... 702
        SAP Basis Level. 0009
        Application server... " "
        Network address...... " "
        Operating system..... "Windows NT"
        Release.............. "6.1"
        Hardware type........ "2x AMD64 Level"
        Character length.... 16 Bits
        Pointer length....... 64 Bits
        Work process number.. 1
        Shortdump setting.... "full"
        Database server... " "
        Database type..... "MSSQL"
        Database name..... "WV1"
        Database user ID.. "wv1"
        Terminal.......... " "
        Char.set.... "C"
        SAP kernel....... 720
        created (date)... "May 7 2010 02:47:09"
        create on........ "NT 5.2 3790 S x86 MS VC++ 14.00"
        Database version. "SQL_Server_9.00 "
        Patch level. 46
        Patch text.. " "
        Database............. "MSSQL 9.00.2047 or higher"
        SAP database version. 720
        Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows NT 6.0, Windows NT 6.1"
        Memory consumption
        Roll.... 0
        EM...... 125693760
        Heap.... 0
        Page.... 204800
        MM Used. 21725312
        MM Free. 3409648
    User and Transaction
        Client.............. 200
        User................
        Language key........ "E"
        Transaction......... "BDLS "
        Transaction ID...... "FFFABFE3FA43F128BEA5005056B349F8"
        EPP Whole Context ID.... "005056B349F81EE3AFFF1C89DB1E7EA5"
        EPP Connection ID....... 00000000000000000000000000000000
        EPP Caller Counter...... 0
        Program............. "SAPLRSBK_AFTER_IMPORT"
        Screen.............. "SAPMSSY0 1000"
        Screen Line......... 6
        Debugger Active..... "none"
    Information on where terminated
        Termination occurred in the ABAP program "SAPLRSBK_AFTER_IMPORT" - in
         "DTP_CONVERT_AFTER_LS_CHANGE".
        The main program was "RBDLSMAP ".
        In the source code you have the termination point in line 74
        of the (Include) program "LRSBK_AFTER_IMPORTF02".
    We found some SAP Notes but they are specific for different SAP versions or SP level.
    Any help will be really appreciated.

    Kindly check notes
    1887227 - P31:DTP:Dump in After Import:RS_DTPA_AFTER_IMPORT
    1684050 - Converting the logical system name for DTPs - Changes1642327 - RSBKDTP_BDLS: dump with error OBJECTS_OBJREF_NOT_ASSIGNED
    BR,
    K.

  • Inactive transformations and DTPs after running BDLS

    Hi Experts
    I ran the BDLS job, Restored , Activated and Replicated the S.S.
    Some of my transformations and DTPs got inactivated . Does any body have any clue of why this happened.
    My observations was when i restored it gave an error message " Error 2 in RFC_VERIFY_DESTINATION "  although the S.S check says OK and i am able to do loads and during replication process of S.S it was saying " Function module  /SDF/AL_MAP_TRANSID_LOGH does not exist."  I am not sure if the above errors/observations have any link to some of Transformations and DTPs getting inactivated while the rest of DTPs are active.
    Please advice
    Thanks
    PK

    Prabu,
    have you solved this issue?
    I am also faceing same issue after BDLS - source system change to BIQ, All DTP's are still assined to OLD-Logical system.
    Please let us know how you solved it.
    Appreciate your response
    Shashi
    Update:
    Note# 1142908 fixed my issue..
    Shashi
    Edited by: Shashi on Sep 10, 2008 7:22 PM

  • Transport of Copies for Modif. Adjust. Transports during patch application

    Hi Experts,
    I've got two transport requests(Modification Adjustment Transports) in the DEV system containing SPAU and SPDD corrections for patch APPL-19, I need to include these Modification Adjustment transports when I start applying patch APPL-19 in my QTY system, wherein it prompts me to include Modification Adjustment Transports if any.
    I've been told to release these requests in the DEV system encorporate both these requests into once and create a single request of the type Transport of Copies, and supply the Transport Request No. of this Transport of Copies request when it prompts me for Modification Adjustment Transports in the QTY system during patch APPL-19 application.
    Please help me out with the procedure to create Transport of Copies for my case, also if you could post some theory on "Transport of Copies", it would be highly helpful.
    Thanks Alot in advance.

    Hi,
    Check the thread for transport of copies creation.
    Request type  Transport of Copies
    For theory check http://help.sap.com/saphelp_nw04/helpdata/en/57/38e1a94eb711d182bf0000e829fbfe/content.htm and related links as well which mention how to include objects into a request.
    Regards,
    Srikishan

  • SPAU / SPDD Transport During Upgrade from 4.6C to ECC 6.0

    We are currently upgrading R/3 4.6C to ECC 6.0 SR2. During the DEV upgrade, we performed Dictionary Objects adjustments before ACT 7.00 and SPAU adjustments at the end of the upgrade. All the adjustments are collected in a transport.
    I read in another thread that we will have to choose 'SELECT FOR TRANSPORT' button in SPAU and not release it. Then, continue with the upgrade. And in the same thread, it is also mentioned that DDIC object modifications should not be handled through transports.
    Now, my question is, if I have collected the SPAU adjustments in a transport and continued with the upgrade without choosing the 'SELECT FOR TRANSPORT' button, can I do it after I complete the upgrade before I continue with QAS upgrade? Will the upgrade still automatically detect the transports and move them? And, my other question is, if DDIC modifications are not supposed to be dealt through transports, how else should they be worked upon?
    Your response ASAP will be rewarded properly.
    Thank you.

    Nick, thank you for the reference. Even though I had gone through this note before, I couldn't apply this note because, this note was refering to "R3up" which, I guess, is no more used. "SAPup" is the program currently in use. Also the location mentioned in the note to execute "R3up" is "//usr/sap/put/exe" but, "SAPup" is located under "//usr/sap/put/bin/". So, I am not sure if there is any new notes refering to this. One other question I have with regards to this note is, one of the arguments for the command R3up is, "REL". For SPDD, the note suggests to use target release. And for SPAU, the note suggest to use the release mentioned in the DDIC activation phase.
    In my case, I am upgrading from 4.6D (kernel) to 700 (kernel). The DDIC activation shows ACT_700. So, I am sure I would use "700" as value for "REL" for SPDD. But, am I supposed to use "46D" for SPAU? or should I use "700"?
    Thank you.

  • Transports during Support Pack application/testing

    During our last Support Pack processing, (SP14-SP16) we had applied the support packs to Dev, QA and were waiting for our functional teams to complete their testing prior to applying the SPs to PRD.  During this time, the SAP manager insisted we promote "a minor change" to PRD via the transport system!  We protested that this would violate best practices (we have previously always "frozen" production changes during SP application and testing) and could possibly introduce program and data errors!  In order to maintain our employment, we acquiesced to the change.  Where can I get documentation the supports our Basis team stance?  Any input is appreciated.
    Steve

    You can quote following line and use the note as reference,
    Test system, quality assurance system and production system should always have the same Support Package status.
    Read,
    Note 432027 - Strategy for using SAP Support Packages
    Regards
    Juan

  • DTP Transporting Question

    Hello,
    when I transport the  2 DTP's from Development box to Production system the DTP name are not the same as Development box DTP's Name.
    While Importing the transports I am selecting "Over right Originals"
    I am not sure why the DTP name's are changed
    Thanks

    Hi Roshan,
    DTP's Technical name will gets changed when u transport them from one system to the other system.
    U dont need to worry about that.. u can very well contibue working using ur DTP's at the target systems.
    Thanks

  • Safe to transport during sleep

    After reading a few posts about Sleep and Safe Sleep, I guess I still have a few questions.
    1) Is it safe to transport the MB when it is in regular Sleep Mode (mainly concerned with keeping the HD safe)
    2) Seeing as how the CPU is in a low power state during this time, is it safe to have the MB in a case without ventilation while in Sleep Mode (not wanting the MB to heat up due to lack of ventilation).

    I certainly
    hope you mean "elaborate" rather than calling me an
    "illiterate"!!
    Sleep deprivation is taking its toll
    Thanks for responding. I definitely don't think the new mag locks on the MB will cause the latch to open accidentally under normal circumstances. I asked because I wasn't sure if there was some other issue that related to it awakening unexpectedly.

  • DTP transport error after system refresh

    Hi Experts,
        The scenario is that Dsystem has already refreshed data from Psystem,and then error occured when transport DTP from D to Q system.
        As per the threads before, i know that we can trace  DTP technical name in table RSBKDTP.
        That i show the detail as the field from RSBKDTP in the below,
    Before refresh,
    System        DTP technical name     DTP original technical name  
    P                  DTP2                            DTP0
    Q                  DTP1                           DTP0
    D                  DTP0                            DTP0           
    After refresh P to D,
    System        DTP technical name     DTP original technical name  
    P                  DTP2                            DTP0
    Q                  DTP1                           DTP0
    D                  DTP2                         DTP0   
    Then the transport error from D to Q caused by that the two name underlined is not corresponding.
    Could anybody give me advice to solve the problem, if not ,i could only creat a new DTP in D.
    I am currently trying to find an solution and I will share if I find. Thanks.
    Edited by: rurupolo on Jul 15, 2010 5:20 PM

    Hi Friend,
    Just activate the DTP2 in D again and transport to Q.  It should work.
    Regards
    Hemant Khemani

  • ERROR DURING BDLS CONVERSION

    Hi Markus and Friends,
    We have done BDLS conversion on pre-production after system copy from the production, when we tried to BDLS conversion between the logical system say PRHCLNT200(which is Production ECC 5.0 System) to QRHCLNT200 (which is preprod ECC5.0 System) with Oracle 9.0.0.7 database and AIX 5.4.
    Some of the tables got error like :
    Table Name  Field Name       Number of Relevant Entries    Number of Converted Entries
    For the tables:
    TBD05,TBD06,TBD20,TBD30 ===>  Error in field  of table . Manual correction required.
    I checked those tables and related to distribution model settings (BD64)....
    Please let me know to solve the issue.
    Thanks in advance....
    Regards,
    SAM

    Hi Kenny,
    Thanks for your response..We ran it once again but the same issue , when i check the logs for the bdls it clearly shows that the above mentioed tables are with the icon of >>>> and it means we need to correct it manually.... but how to rectify it.
    Please let me know what changes i need to do.
    Cheers,
    SAN

  • Managing Transports during EHP4 Installation

    Hi,
    Appreciate some help. We will soon be installing EHP4 in our DEV ERP system. After the installation, DEV ERP will be with EHP4 but QAS and PRD will not. Those will be installed after tests and checks have been completed. Can changes be transported across to QAS and PRD from DEV? Thanks.

    Hi Shahnaz,
    I am not able to understand by installing EHP4 but not activating.
    E.g.- If you are upgarding your SAP_Basis package to 701 then you don't need to do some extra step to activate it.
    Thanks
    Sunny

  • Can't transport two DTP

    Dear all ,
    I couldn't transport more than one DTP which is uploading same target . On each transport last DTP overwrite previous one .
    For example I have two following DTP
    Current month DTP
    Previous Month  DTP
    but when I'm trying to transport them just
    Previous Month DTP is transported to the target system
    Then I'm trying to transport Current Month DTP but it is overwriting on Previous Month DTP
    Do you have any suggestions on this problem
    Thanks in advance ....

    Hello Erkan Akin,
    We are on SP17 and had a lot of DTP / Process Chain transport problem. Some solution we have two DTP, one for actual and other for previous period.
    After aply all these SAP Notes below, we fixed the problems and now we are transporting DTP / Process Chain correctly from dev to quality environment:
    1147587     70SP18: process chain after import: DTP not found
    1250577     70SP20: Source-dependent Error DTP texts after transport
    1271324     70SP21: Error DTP text incorrect after transport
    1002791     7.0 Support Package 18: Process chains - DTP confirmations
    1139653     70SP18: DTPs and error DTPs generated in process chain
    1147766     P18:PC:DTP:Select only full DTPs for overlapping deletion
    1163735     70SP18:Full DTP & Error DTP is not activated after transport
    1267427     SP20: dtp cts
    1271730     70SP21: Transport full DTP with OLAP or selection routine
    1272636     70SP21: DTP transports after system copy
    1330738     70SP22: Transport full DTP without filter overwritten
    1151359     ASSERTION_FAILED dump in DTP transport
    1158914     Transport of filter routines
    1317338     Problems with grouping
    1148403     70SP18: BDLS after early replication
    Please, let me know if you try some of these notes, and if helped you.
    Best Regards,
    Mateus Celeste

  • Best approach for BDLS Transports

    Hi floks,
    we are having BWQ pointing over to R3Q  and BWQ pointing over to R3Z.so while transporting the objects we are getting some difficulties and errors like RS Basis idoc table corrupted...can anyone suggest good methods for BDLS to switch from BWQ to R3Q and BWQ to R3Z..
    I dont have an idea about BDLS transports...can anyone explain about it.
    thanks,
    andy

    Based on my experience we ran TA BDLS in particular system e.g. after sys copy from PRD to TST system we exchanged SID of copied PRD system to SID=TST. I do not think that you have to transport any BDLS stuff.

  • Missed get delta once option in dtp and transported to prod

    hi all
    we have transported DTP for our infocube 0wbs_c11 into production.
    This infocube 0wbs_c11 is loaded from 4 datasources of which one datasource supports delta and rest donot.
    so in process chains we are using the option for delete overlapping requests. for all the 3 datasources which doesnot support delta.
    But for one of these 3 datasources we have transported DTP without ticking GET DELTA ONCE OPTION AND loaded to infocube.
    now we should tick the get delta once option and transport it to production, where we already ran this dtp once.
    Since we cannot enable the get delta once option enabled in dtp after the first dtp run
    my question is should i delete the request from infocube and transport the dtp transport request (to prod )with getdelta once option ticked and run the dtp again will it work.
    or do i need to delete the request as well as dtp from prod and then transport the new request with delta once option ticked.
    regards
    krishna

    based on the above link which says after activating transformations using the program rsdg_trfn_activate if we run process chain the dtp's get activated by itself
    i have done a trial based on the above point
    i went to dtp execute tab and press  execute ,and when it asks me for furthur process
    YES   NO   CANCEL
    I have cancelled the execution of dtp.
    and now when i refresh the tree the dtp is seen active .
    i followe the same for all.
    regards
    Edited by: krishnav3.5 on Sep 16, 2011 4:17 PM

Maybe you are looking for