DTR set up
Hi
When i hit the like http://<host>:<port>/dtr i get 404 not found error( The requested resource does not exist.)
Which means DTR is not set up on the server.
How to set up DTR on a server??
Do we need to deploy any sca files??
please help...
Regards
Jabbs
HI,
What version of NW you are using ?
check this link
http://help.sap.com/saphelp_nw70/helpdata/EN/d5/294f39dc0997409f16f0ffdd8ec852/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209
Similar Messages
-
Unable to connect Dial up connections
We are having dialup 15 connections in router 3845 model IOS version 12.4 1A.
We are unable to have a connection between dialup branches to headquarter. these are the command
aaa new-model
aaa authentication login telnet local
aaa authentication login ppp local
aaa authentication ppp ppp local
aaa authorization network ppp local
aaa session-id common
interface Group-Async1
description "ASYN-GROUP"
ip unnumbered GigabitEthernet0/1
encapsulation ppp
ip tcp header-compression
async dynamic routing
async mode interactive
peer default ip address pool pool
ppp authentication pap chap ppp
ppp authorization ppp
group-range 1/0 1/15
line aux 0
stopbits 1
line 1/0 1/15
login authentication local
modem Dialin
modem autoconfigure discovery
autoselect during-login
autoselect ppp
flowcontrol hardware
ip local pool pool 192.168.100.1 192.168.100.30
ip classless
When I tried to debug I found the below output :
RDCCI_2ND_HQ#
000381: *Sep 17 10:45:43.823: Modem 1/12 ACF: State: Ringing
000382: *Sep 17 10:45:43.823: Modem 1/12 ACF: Event: Incoming Ring
RDCCI_2ND_HQ#
000383: *Sep 17 10:45:45.295: Modem 1/12 ACF: Event: Hook state: Off Hook Answering
000384: *Sep 17 10:45:45.295: Modem 1/12 ACF: State: Answering
RDCCI_2ND_HQ#
000385: *Sep 17 10:46:06.723: Modem 1/12 ACF: Event: CONNECT V34/LAPM/V44/24000:TX/26400:RX
000386: *Sep 17 10:46:06.723: Modem 1/12 ACF: State: Connected
000387: *Sep 17 10:46:07.695: TTY1/12: DSR came up
000388: *Sep 17 10:46:07.695: tty1/12: Modem: IDLE->(unknown)
000389: *Sep 17 10:46:07.695: TTY1/12: EXEC creation
000390: *Sep 17 10:46:07.695: AAA/BIND(00000017): Bind i/f Async1/12
000391: *Sep 17 10:46:07.695: TTY1/12: create timer type 10, 30 seconds
RDCCI_2ND_HQ#
000392: *Sep 17 10:46:11.071: TTY1/12: Autoselect(2) sample [suppressed--line is not echoing]
000393: *Sep 17 10:46:11.071: TTY1/12: Autoselect(2) sample [suppressed--line is not echoing]
000394: *Sep 17 10:46:11.075: TTY1/12: Autoselect(2) sample [suppressed--line is not echoing]
000395: *Sep 17 10:46:11.075: TTY1/12: Autoselect(2) sample 7EFF7D23
000396: *Sep 17 10:46:11.075: TTY1/12 Autoselect cmd: ppp negotiate
000397: *Sep 17 10:46:11.075: TTY1/12: pause timer type 10 (OK)
000398: *Sep 17 10:46:11.075: TTY1/12: EXEC creation
000399: *Sep 17 10:46:11.075: TTY1/12: create timer type 1, 600 seconds
000400: *Sep 17 10:46:11.075: As1/12 PPP: Consuming data in TTY1/12 receive queue
000401: *Sep 17 10:46:11.075: APPP1/12: Input packet, len = 27, header = FF 3 C0 21
000402: *Sep 17 10:46:11.075: As1/12 PPP: Caching packet rcvd on TTY1/12
000403: *Sep 17 10:46:11.075: Async1/12: Setup PPP framing on TTY1/12
000404: *Sep 17 10:46:11.075: TTY1/12: destroy timer type 1
000405
RDCCI_2ND_HQ#: *Sep 17 10:46:11.075: TTY1/12: no timer type 0 to destroy
000406: *Sep 17 10:46:11.075: TTY1/12: no timer type 2 to destroy
000407: *Sep 17 10:46:11.075: As1/12 PPP: Async Protocol Mode started for 0.0.0.0
000408: *Sep 17 10:46:11.075: As1/12 PPP: I pkt type 0xC021, datagramsize 27 link[ppp]
000409: *Sep 17 10:46:11.075: As1/12 PPP: I pkt type 0xC021, datagramsize 27 link[ppp]
000410: *Sep 17 10:46:11.075: As1/12 PPP: Processed packet cached during autoselect
000411: *Sep 17 10:46:11.075: As1/12 LCP: I CONFREQ [Closed] id 0 len 23
000412: *Sep 17 10:46:11.075: As1/12 LCP: ACCM 0x00000000 (0x020600000000)
000413: *Sep 17 10:46:11.075: As1/12 LCP: MagicNumber 0x56920282 (0x050656920282)
000414: *Sep 17 10:46:11.075: As1/12 LCP: PFC (0x0702)
000415: *Sep 17 10:46:11.075: As1/12 LCP: ACFC (0x0802)
000416: *Sep 17 10:46:11.075: As1/12 LCP: Callback 6 (0x0D0306)
000417: *Sep 17 10:46:11.075: As1/12: Enabling PPP framing in UART Microcode on TTY1/12 succeeded
000418: *Sep 17 10:46:11.075: As1/12 LCP: Lower layer not up, Fast Starting
000419: *Sep 17 10:46:11.075: As1/12 PPP: Using modem call direction
000420: *Sep 17 10:46:11.075: As1/12 PPP: Treating connection as a callin
000421: *Sep 17 10:46:11.075: As1/12 PPP: Session handle[800001A] Session id[19]
000422: *Sep 17 10:46:11.075: As1/12 PPP: Phase is ESTABLISHING, Passive Open
000423: *Sep 17 10:46:11.075: As1/12 LCP: State is Listen
000424: *Sep 17 10:46:11.075: As1/12 LCP: O CONFREQ [Listen] id 13 len 24
000425: *Sep 17 10:46:11.075: As1/12 LCP: ACCM 0x000A0000 (0x0206000A0000)
000426: *Sep 17 10:46:11.075: As1/12 LCP: AuthProto PAP (0x0304C023)
000427: *Sep 17 10:46:11.075: As1/12 LCP: MagicNumber 0x14A18BAE (0x050614A18BAE)
000428: *Sep 17 10:46:11.079: As1/12 LCP: PFC (0x0702)
000429: *Sep 17 10:46:11.079: As1/12 LCP: ACFC (0x0802)
000430: *Sep 17 10:46:11.079: As1/12 LCP: O CONFREJ [Listen] id 0 len 7
000431: *Sep 17 10:46:11.079: As1/12 LCP: Callback 6 (0x0D0306)
000432: *Sep 17 10:46:11.079: Modem 1/12 ACF: CMD PPP mode active
000433: *Sep 17 10:46:11.079: Modem 1/12 ACF: CMD PPP escape maps set: TX map=00000000 RX map=FFFFFFFF
000434: *Sep 17 10:46:11.079: %LINK-3-UPDOWN: Interface Async1/12, changed state to up
000435: *Sep 17 10:46:11.559: As1/12 PPP: I pkt type 0xC021, datagramsize 28 link[ppp]
000436: *Sep 17 10:46:11.559: As1/12 PPP: I pkt type 0xC021, datagramsize 28 link[ppp]
000437: *Sep 17 10:46:11.559: As1/12 LCP: I CONFACK [REQsent] id 13 len 24
000438: *Sep 17 10:46:11.559: As1/12 LCP: ACCM 0x000A0000 (0x0206000A0000)
000439: *Sep 17 10:46:11.559: As1/12 LCP: AuthProto PAP (0x0304C023)
000440: *Sep 17 10:46:11.559: As1/12 LCP: MagicNumber 0x14A18BAE (0x050614A18BAE)
000441: *Sep 17 10:46:11.559: As1/12 LCP: PFC (0x0702)
000442: *Sep 17 10:46:11.559: As1/12 LCP: ACFC (0x0802)
000443: *Sep 17 10:46:11.563: As1/12 PPP: I pkt type 0xC021, datagramsize 24 link[ppp]
000444: *Sep 17 10:46:11.563: As1/12 PPP: I pkt type 0xC021, datagramsize 24 link[ppp]
000445: *Sep 17 10:46:11.563: As1/12 LCP: I CONFREQ [ACKrcvd] id 1 len 20
000446: *Sep 17 10:46:11.563: As1/12 LCP: ACCM 0x00000000 (0x020600000000)
000447: *Sep 17 10:46:11.563: As1/12 LCP: MagicNumber 0x56920282 (0x050656920282)
000448: *Sep 17 10:46:11.563: As1/12 LCP: PFC (0x0702)
000449: *Sep 17 10:46:11.563: As1/12 LCP: ACFC (0x0802)
000450: *Sep 17 10:46:11.563: As1/12 LCP: O CONFACK [ACKrcvd] id 1 len 20
000451: *Sep 17 10:46:11.563: As1/12 LCP: ACCM 0x00000000 (0x020600000000)
000452: *Sep 17 10:46:11.563: As1/12 LCP: MagicNumber 0x56920282 (0x050656920282)
000453: *Sep 17 10:46:11.563: As1/12 LCP: PFC (0x0702)
000454: *Sep 17 10:46:11.563: As1/12 LCP: ACFC (0x0802)
000455: *Sep 17 10:46:11.567: As1/12 LCP: State is Open
000456: *Sep 17 10:46:11.567: As1/12 PPP: Phase is AUTHENTICATING, by this end
000457: *Sep 17 10:46:11.567: Modem 1/12 ACF: CMD PPP escape maps set: TX map=00000000 RX map=00000000
000458: *Sep 17 10:46:11.859: As1/12 PPP: I pkt type 0xC021, datagramsize 20 link[ppp]
000459: *Sep 17 10:46:11.859: As1/12 PPP: I pkt type 0xC021, datagramsize 20 link[ppp]
000460: *Sep 17 10:46:11.859: As1/12 LCP: I IDENTIFY [Open] id 2 len 18 magic 0x56920282 MSRASV5.20
000461: *Sep 17 10:46:11.863: As1/12 PPP: I pkt type 0xC021, datagramsize 25 link[ppp]
000462: *Sep 17 10:46:11.863: As1/12 PPP: I pkt type 0xC021, datagramsize 25 link[ppp]
000463: *Sep 17 10:46:11.863: As1/12 LCP: I IDENTIFY [Open] id 3 len 23 magic 0x56920282 MSRAS-0-ITADMIN
000464: *Sep 17 10:46:11.863: As1/12 PPP: I pkt type 0xC021, datagramsize 26 link[ppp]
000465: *Sep 17 10:46:11.863: As1/12 PPP: I pkt type 0xC021, datagramsize 26 link[ppp]
000466: *Sep 17 10:46:11.863: As1/12 LCP: I IDENTIFY [Open] id 4 len 24 magic 0x56920282 \}3nk[^F?SVT]=}E
000467: *Sep 17 10:46:11.867: As1/12 PPP: I pkt type 0xC023, datagramsize 16 link[ppp]
000468: *Sep 17 10:46:11.867: As1/12 PPP: I pkt type 0xC023, datagramsize 16 link[ppp]
000469: *Sep 17 10:46:11.867: As1/12 PAP: I AUTH-REQ id 2 len 14 from "test"
000470: *Sep 17 10:46:11.867: As1/12 PAP: Authenticating peer test
000471: *Sep 17 10:46:11.867: As1/12 PPP: Phase is FORWARDING, Attempting Forward
000472: *Sep 17 10:46:11.867: As1/12 PPP: Phase is AUTHENTICATING, Unauthenticated User
000473: *Sep 17 10:46:11.867: As1/12 PPP: Phase is FORWARDING, Attempting Forward
000474: *Sep 17 10:46:11.867: As1/12 PPP: Phase is AUTHENTICATING, Authenticated User
000475: *Sep 17 10:46:11.867: AAA/AUTHOR (0x17): Pick method list 'ppp'
000476: *Sep 17 10:46:11.867: AAA/AUTHOR (0x17): Pick method list 'ppp'
000477: *Sep 17 10:46:11.867: As1/12 PPP/AAA: Check Attr: Framed-Protocol
000478: *Sep 17 10:46:11.867: As1/12 PPP/AAA: Check Attr: username
000479: *Sep 17 10:46:11.867: As1/12 AAA/AUTHOR/FSM: We can start LCP
000480: *Sep 17 10:46:11.867: As1/12 PPP/AAA: Check Attr: Framed-Protocol
000481: *Sep 17 10:46:11.867: As1/12 PPP/AAA: Check Attr: username
000482: *Sep 17 10:46:11.867: As1/12 AAA/AUTHOR/FSM: We can start IPCP
000483: *Sep 17 10:46:11.867: As1/12 AAA/AUTHOR/LCP: Process Author
000484: *Sep 17 10:46:11.867: As1/12 PAP: O AUTH-ACK id 2 len 5
000485: *Sep 17 10:46:11.867: As1/12 PPP: Phase is UP
000486: *Sep 17 10:46:11.867: As1/12 AAA/AUTHOR/IPCP: Already authorized
000487: *Sep 17 10:46:11.867: As1/12 AAA/AUTHOR/FSM: We can start IPCP
000488: *Sep 17 10:46:11.867: As1/12 IPCP: O CONFREQ [Closed] id 1 len 16
000489: *Sep 17 10:46:11.867: As1/12 IPCP: CompressType VJ 15 slots CompressSlotID (0x0206002D0F01)
000490: *Sep 17 10:46:11.867: As1/12 IPCP: Address 192.168.100.1 (0x0306C0A86401)
000491: *Sep 17 10:46:11.867: As1/12 PPP: Process pending ncp packets
000492: *Sep 17 10:46:12.163: As1/12 PPP: I pkt type 0x8057, datagramsize 16 link[ipv6]
000493: *Sep 17 10:46:12.163: As1/12 PPP: I pkt type 0x8057, datagramsize 16 link[ipv6]
000494: *Sep 17 10:46:12.163: As1/12 IPV6CP: I CONFREQ [Not negotiated] id 5 len 14
000495: *Sep 17 10:46:12.163: As1/12 IPV6CP: Interface-Id 6C47:6D95:1AE3:2F30 (0x010A6C476D951AE32F30)
000496: *Sep 17 10:46:12.163: As1/12 LCP: O PROTREJ [Open] id 14 len 20 protocol IPV6CP (0x80570105000E010A6C476D951AE32F30)
000497: *Sep 17 10:46:12.163: As1/12 PPP: I pkt type 0x80FD, datagramsize 12 link[ccp]
000498: *Sep 17 10:46:12.163: As1/12 PPP: I pkt type 0x80FD, datagramsize 12 link[ccp]
000499: *Sep 17 10:46:12.163: As1/12 CCP: I CONFREQ [Not negotiated] id 6 len 10
000500: *Sep 17 10:46:12.163: As1/12 CCP: MS-PPC supported bits 0x00000001 (0x120600000001)
000501: *Sep 17 10:46:12.163: As1/12 LCP: O PROTREJ [Open] id 15 len 16 protocol CCP (0x80FD0106000A120600000001)
000502: *Sep 17 10:46:12.171: As1/12 PPP: I pkt type 0x8021, datagramsize 42 link[ip]
000503: *Sep 17 10:46:12.171: As1/12 PPP: I pkt type 0x8021, datagramsize 42 link[ip]
000504: *Sep 17 10:46:12.171: As1/12 IPCP: I CONFREQ [REQsent] id 7 len 40
000505: *Sep 17 10:46:12.171: As1/12 IPCP: CompressType VJ 15 slots CompressSlotID (0x0206002D0F01)
000506: *Sep 17 10:46:12.171: As1/12 IPCP: Address 0.0.0.0 (0x030600000000)
000507: *Sep 17 10:46:12.171: As1/12 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000)
000508: *Sep 17 10:46:12.171: As1/12 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000)
000509: *Sep 17 10:46:12.171: As1/12 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000)
000510: *Sep 17 10:46:12.171: As1/12 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000)
000511: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 0.0.0.0
000512: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: Authorization succeeded
000513: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 0.0.0.0
000514: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/CONFIG: Pools refreshed for pool pool
000515: *Sep 17 10:46:12.171: AAA/AUTHOR (0x17): Invalid method list id=0x0
000516: *Sep 17 10:46:12.171: As1/12 IPCP: Cannot satisfy pool request
000517: *Sep 17 10:46:12.171: As1/12 IPCP: Neither side knows remote address
000518: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: no author-info for primary dns
000519: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: no author-info for primary wins
000520: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: no author-info for seconday dns
000521: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: no author-info for seconday wins
000522: *Sep 17 10:46:12.171: As1/12 IPCP: O CONFREJ [REQsent] id 7 len 22
000523: *Sep 17 10:46:12.171: As1/12 IPCP: Address 0.0.0.0 (0x030600000000)
000524: *Sep 17 10:46:12.171: As1/12 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000)
000525: *Sep 17 10:46:12.171: As1/12 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000)
000526: *Sep 17 10:46:12.171: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000527: *Sep 17 10:46:12.171: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000528: *Sep 17 10:46:12.171: As1/12 IPCP: I CONFACK [REQsent] id 1 len 16
000529: *Sep 17 10:46:12.171: As1/12 IPCP: CompressType VJ 15 slots CompressSlotID (0x0206002D0F01)
000530: *Sep 17 10:46:12.171: As1/12 IPCP: Address 192.168.100.1 (0x0306C0A86401)
000531: *Sep 17 10:46:12.447: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000532: *Sep 17 10:46:12.447: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000533: *Sep 17 10:46:12.447: As1/12 IPCP: I CONFREQ [ACKrcvd] id 8 len 16
000534: *Sep 17 10:46:12.447: As1/12 IPCP: CompressType VJ 15 slots CompressSlotID (0x0206002
%This command has no effect on this line; use modem AT commands insteadD0F01)
000535: *Sep 17 10:46:12.447: As1/12 IPCP: Address 0.0.0.0 (0x030600000000)
000536: *Sep 17 10:46:12.447: As1/12 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 0.0.0.0
000537: *Sep 17 10:46:12.447: As1/12 AAA/AUTHOR/IPCP: Authorization succeeded
000538: *Sep 17 10:46:12.447: As1/12 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 0.0.0.0
000539: *Sep 17 10:46:12.447: As1/12 AAA/AUTHOR/CONFIG: Pool pool refresh skipped
000540: *Sep 17 10:46:12.447: As1/12 AAA/AUTHOR/CONFIG: Pools refreshed 0 seconds ago
000541: *Sep 17 10:46:12.447: As1/12 IPCP: Cannot satisfy pool request
000542: *Sep 17 10:46:12.447: As1/12 IPCP: Neither side knows remote address
000543: *Sep 17 10:46:12.447: As1/12 IPCP: O CONFREJ [ACKrcvd] id 8 len 10
000544: *Sep 17 10:46:12.447: As1/12 IPCP: Address 0.0.0.0 (0x030600000000)
000545: *Sep 17 10:46:12.719: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000546: *Sep 17 10:46:12.719: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000547: *Sep 17 10:46:12.719: As1/12 IPCP: I TERMREQ [ACKrcvd] id 9 len 16 (0x56920282003CCD74000002E2)
000548: *Sep 17 10:46:12.719: As1/12 IPCP: O TERMACK [ACKrcvd] id 9 len 4
000549: *Sep 17 10:46:12.867: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async1/12, changed state to up
000550: *Sep 17 10:46:13.871: As1/12 IPCP: TIMEout: State REQsent
000551: *Sep 17 10:46:13.871: As1/12 IPCP: O CONFREQ [REQsent] id 2 len 16
000552: *Sep 17 10:46:13.871: As1/12 IPCP: CompressType VJ 15 slots CompressSlotID (0x0206002D0F01)
000553: *Sep 17 10:46:13.871: As1/12 IPCP: Address 192.168.100.1 (0x0306C0A86401)
000554: *Sep 17 10:46:14.327: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000555: *Sep 17 10:46:14.327: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000556: *Sep 17 10:46:14.327: As1/12 IPCP: I TERMACK [REQsent] id 2 len 16 (0x0206002D0F010306C0A86401)
000557: *Sep 17 10:46:15.887: As1/12 IPCP: TIMEout: State REQsent
000558: *Sep 17 10:46:15.887: As1/12 IPCP: O CONFREQ [REQsent] id 3 len 16
000559: *Sep 17 10:46:15.887: As1/12 IPCP: CompressType VJ 15 slots CompressSlotID (0x0206002D0F01)
000560: *Sep 17 10:46:15.887: As1/12 IPCP: Address 192.168.100.1 (0x0306C0A86401)
000561: *Sep 17 10:46:16.139: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000562: *Sep 17 10:46:16.139: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000563: *Sep 17 10:46:16.139: As1/12 IPCP: I TERMACK [REQsent] id 3 len 16 (0x0206002D0F010306C0A86401)
000564: *Sep 17 10:46:17.747: As1/12 PPP: I pkt type 0xC021, datagramsize 20 link[ppp]
000565: *Sep 17 10:46:17.747: As1/12 PPP: I pkt type 0xC021, datagramsize 20 link[ppp]
000566: *Sep 17 10:46:17.747: As1/12 LCP: I TERMREQ [Open] id 10 len 16 (0x56920282003CCD7400000000)
000567: *Sep 17 10:46:17.747: As1/12 LCP: O TERMACK [Open] id 10 len 4
000568: *Sep 17 10:46:17.751: As1/12 PPP: Sending Acct Event[Down] id[17]
000569: *Sep 17 10:46:17.751: As1/12 IPCP: State is Closed
000570: *Sep 17 10:46:17.751: As1/12 PPP: Phase is TERMINATING
000571: *Sep 17 10:46:18.667: Modem 1/12 ACF: Event: Hook state: On Hook
000572: *Sep 17 10:46:18.667: Modem 1/12 ACF: State: Hangup
000573: *Sep 17 10:46:18.667: Modem 1/12 ACF: Event: DISCONNECT
000574: *Sep 17 10:46:18.667: Modem 1/12 ACF: State: Idle
000575: *Sep 17 10:46:18.695: TTY1/12: DSR was dropped
000576: *Sep 17 10:46:18.695: tty1/12: Modem: READY->HANGUP
000577: *Sep 17 10:46:18.695: TTY1/12: dropping DTR, hanging up
000578: *Sep 17 10:46:18.695: TTY1/12: Async Int reset: Dropping DTR
000579: *Sep 17 10:46:18.695: tty1/12: Modem: HANGUP->IDLE
000580: *Sep 17 10:46:18.695: Modem 1/12 ACF: CMD DTR set low
000581: *Sep 17 10:46:18.695: Modem 1/12 ACF: CMD DTR set low
000582: *Sep 17 10:46:18.751: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async1/12, changed state to down
000583: *Sep 17 10:46:19.695: TTY1/12: cleanup pending. Delaying DTR
000584: *Sep 17 10:46:19.695: TTY1/12: cleanup pending. Delaying DTR
000585: *Sep 17 10:46:19.759: As1/12 LCP: TIMEout: State TERMsent
000586: *Sep 17 10:46:19.759: As1/12 LCP: State is Closed
000587: *Sep 17 10:46:19.759: As1/12 PPP: Phase is DOWN
000588: *Sep 17 10:46:20.695: %LINK-5-CHANGED: Interface Async1/12, changed state to reset
000589: *Sep 17 10:46:20.695: TTY1/12: cleanup pending. Delaying DTR
000590: *Sep 17 10:46:20.695: TTY1/12: cleanup pending. Delaying DTR
000591: *Sep 17 10:46:21.695: TTY1/12: cleanup pending. Delaying DTR
000592: *Sep 17 10:46:21.695: TTY1/12: cleanup pending. Delaying DTR
000593: *Sep 17 10:46:22.695: TTY1/12: cleanup pending. Delaying DTR
000594: *Sep 17 10:46:22.695: TTY1/12: cleanup pending. Delaying DTR
000595: *Sep 17 10:46:23.695: Async1/12: Async protocol mode stopped for 0.0.0.0
000596: *Sep 17 10:46:23.695: Async1/12: Reset PPP framing on TTY1/12
000597: *Sep 17 10:46:23.695: TTY1/12: no timer type 0 to destroy
000598: *Sep 17 10:46:23.695: TTY1/12: no timer type 1 to destroy
000599: *Sep 17 10:46:23.695: TTY1/12: no timer type 3 to destroy
000600: *Sep 17 10:46:23.695: TTY1/12: no timer type 4 to destroy
000601: *Sep 17 10:46:23.695: TTY1/12: destroy timer type 10
000602: *Sep 17 10:46:23.695: TTY1/12: no timer type 2 to destroy
000603: *Sep 17 10:46:23.695: Async1/12: allowing modem_process to continue hangup
000604: *Sep 17 10:46:23.695: TTY1/12: restoring DTR
000605: *Sep 17 10:46:23.695: Modem 1/12 ACF: CMD Character mode active
000606: *Sep 17 10:46:23.695: Modem 1/12 ACF: CMD DTR set high
000607: *Sep 17 10:46:23.695: Modem 1/12 ACF: State: Endcall
000608: *Sep 17 10:46:23.695: TTY1/12: autoconfigure probe started
000609: *Sep 17 10:46:23.831: Modem 1/12 ACF: Event: ENDCALL: Disconnect Received
000610: *Sep 17 10:46:23.831: Modem 1/12 ACF: State: Init
000611: *Sep 17 10:46:25.199: Modem 1/12 ACF: State: Idle
000612: *Sep 17 10:46:25.695: %LINK-3-UPDOWN: Interface Async1/12, changed state to down
RDCCI_2ND_HQ#
RDCCI_2ND_HQ#
000613: *Sep 17 10:48:25.695: TTY0: timer type 1 expired
000614: *Sep 17 10:48:25.695: TTY0: Exec timer (continued)
Please try to help me out in this problemcheck the configuration whether it is correct or not ,is there any commands are missing
i cann't input the command in line mode
Router(config-line)#autoselect ppp
%Autoselect w/o the interface command 'Async mode interactive' is useless
Router(config-line)#
check the commands and output of the debug
aaa new-model
aaa authentication login telnet local
aaa authentication login ppp local
aaa authentication ppp ppp local
aaa authorization network ppp local
aaa session-id common
interface Group-Async1
description "ASYN-GROUP"
ip unnumbered GigabitEthernet0/1
encapsulation ppp
ip tcp header-compression
async dynamic routing
async mode interactive
peer default ip address pool pool
ppp authentication pap chap ppp
ppp authorization ppp
group-range 1/0 1/15
line aux 0
stopbits 1
line 1/0 1/15
login authentication local
modem Dialin
modem autoconfigure discovery
autoselect during-login
autoselect ppp
flowcontrol hardware -
Have a 2800 router configuring Dialin with the NM-8AM Analog Modem Module. Have the remote modem (US Robotics Courier) conencted to the router but don't seem to seeing any PPP packets or LCAP. config below and debug ouput. Why is the modem hanging up?
interface Loopback0
ip address 192.168.73.1 255.255.255.0
interface FastEthernet0/0
ip address 171.15.1.197 255.255.255.0
duplex auto
speed auto
interface Group-Async1
ip unnumbered Loopback0
encapsulation ppp
no logging event link-status
dialer in-band
dialer idle-timeout 3600
dialer-group 1
no snmp trap link-status
async mode interactive
peer default ip address pool DIALIN
ppp authentication pap chap
group-range 1/0 1/7
ip local pool DIALIN 192.168.73.50
192.168.73.100
ip route 0.0.0.0 0.0.0.0 171.15.1.1
no ip http server
dialer-list 1 protocol ip permit
control-plane
line 1/0 1/7
modem InOut
modem autoconfigure discovery
transport input all
autoselect ppp
flowcontrol hardware
scheduler allocate 20000 1000
debug modem debug ppp
*Dec 8 11:34:50: Modem 1/1 ACF: State: Ringing
*Dec 8 11:34:50: Modem 1/1 ACF: Event: Incoming Ring
*Dec 8 11:34:50: Modem 1/1 ACF: Event: Hook state: Off Hook Answering
*Dec 8 11:34:50: Modem 1/1 ACF: State: Answering
*Dec 8 11:35:09: Modem 1/1 ACF: Event: CONNECT V34/LAPM/NONE/9600:TX/9600:RX
*Dec 8 11:35:09: Modem 1/1 ACF: State: Connected
*Dec 8 11:35:09: TTY1/1: DSR came up
*Dec 8 11:35:09: tty1/1: Modem: IDLE->(unknown)
*Dec 8 11:35:09: TTY1/1: Autoselect started
*Dec 8 11:35:09: TTY1/1: create timer type 0, 120 seconds
*Dec 8 11:35:09: TTY1/1: Autoselect starting EXEC
*Dec 8 11:35:09: TTY1/1: destroy timer type 0
*Dec 8 11:35:09: TTY1/1: EXEC creation
*Dec 8 11:35:09: TTY1/1: create timer type 1, 600 seconds
*Dec 8 11:35:49: Modem 1/1 ACF: Event: Hook state: On Hook
*Dec 8 11:35:49: Modem 1/1 ACF: State: Hangup
*Dec 8 11:35:49: Modem 1/1 ACF: Event: DISCONNECT
*Dec 8 11:35:49: Modem 1/1 ACF: State: Idle
*Dec 8 11:35:49: TTY1/1: dropping DTR, hanging up
*Dec 8 11:35:49: tty1/1: Modem: HANGUP->IDLE
*Dec 8 11:35:49: Modem 1/1 ACF: CMD DTR set low
*Dec 8 11:35:51: TTY1/1: restoring DTR
*Dec 8 11:35:51: Modem 1/1 ACF: CMD DTR set high
*Dec 8 11:35:51: Modem 1/1 ACF: State: Endcall
*Dec 8 11:35:52: Modem 1/1 ACF: Event: ENDCALL: Disconnect Received
*Dec 8 11:35:52: Modem 1/1 ACF: State: Init
*Dec 8 11:35:53: Modem 1/1 ACF: State: Idle
*Dec 8 11:40:48: TTY515: timer type 1 expired
*Dec 8 11:40:48: TTY515: Exec timer (continued)Modem now detected thanks, this document helped.
Have another issue, modem is always unable to authenticate, though I have verified the username & password are correct on the PC modem/settings that connects to the router. Here is the message below:
*Dec 15 11:04:53: As1/1 PAP: I AUTH-REQ id 3 len 16 from "010"
*Dec 15 11:04:53: As1/1 PAP: Authenticating peer 010
*Dec 15 11:04:53: As1/1 PPP: Phase is FORWARDING, Attempting Forward
*Dec 15 11:04:53: As1/1 PPP: Phase is AUTHENTICATING, Unauthenticated User
*Dec 15 11:04:53: As1/1 PPP: Sent PAP LOGIN Request
*Dec 15 11:04:53: As1/1 PPP: Received LOGIN Response FAIL
*Dec 15 11:04:53: As1/1 PAP: O AUTH-NAK id 3 len 26 msg is "Authentication failed"
*Dec 15 11:04:53: As1/1 PPP: Sending Acct Event[Down] id[76]
*Dec 15 11:04:53: As1/1 PPP: Phase is TERMINATING
*Dec 15 11:04:53: As1/1 LCP: O TERMREQ [Open] id 39 len 4
*Dec 15 11:04:54: Modem 1/1 ACF: Event: Hook state: On Hook
*Dec 15 11:04:54: Modem 1/1 ACF: State: Hangup
*Dec 15 11:04:54: Modem 1/1 ACF: Event: DISCONNECT
config below
username abc password 123456
interface Group-Async1
ip unnumbered Loopback0
encapsulation ppp
no logging event link-status
dialer in-band
dialer idle-timeout 3600
dialer-group 1
no snmp trap link-status
async mode interactive
ppp authentication pap chap
peer default ip address pool DIALIN
group-range 1/0 1/7
dialer-list 1 protocol ip permit
line 1/0 1/7
login local
modem InOut
transport input all
autoselect during-login
autoselect ppp
stopbits 1
flowcontrol hardware -
DTR: How do I set an older version as active version
Hello,
Using the DTR I can sync to a specific Version of a File using "Sync to this version" from the context menu of the Version Graph.
Now I want to set the Version I synced to as the active version. Is there a possibility to do this?
Greets JohannHi
When I understand the question right, then the intension is to have an older version now as the current active version in the workspace on DTR.
Up to now DTR does not yet provide this functionality. But there is a workaround:
- please sync the file to the version that afterwards should get active (e.g. using context menu in version graph)
- and copy the synced file to a temporary location
- then sync the file again to the current active version
- and check-out for edit this version of the file
- then copy the older version from the temporary location over the checked-out version
- check-in
Please be aware that this changes the current active version in the workspace and that this change is visible to everyone accessing the workspace.
Regards, Uli -
Problem setting DTR permissions
Hi,
I tried to set permissions in DTR. When defining the permission at root level (http:///dtr/) with the eclipse plugin the permission editor opens.
I then grant all permissions to JDI.Administrators. When I click at the OK button nothing happens. I can click CANCEL and the dialog disappears, but the permissions are not visible in the permissions view.
The eclipse log file encloses the following error message:
java.lang.NullPointerException
at com.tssap.dtr.client.lib.acl.impl.ACL.assureFileNotCheckedOutByOthers(ACL.java:317)
at com.tssap.dtr.client.lib.acl.impl.ACL.attachToActivity(ACL.java:327)
at com.tssap.dtr.client.lib.acl.impl.ACL.checkOut(ACL.java:342)
at com.tssap.dtr.client.lib.acl.impl.ACL.access$500(ACL.java:44)
at com.tssap.dtr.client.lib.acl.impl.ACL$New.modify(ACL.java:130)
at com.tssap.dtr.client.lib.acl.impl.ACL.modify(ACL.java:507)
at com.tssap.dtr.client.lib.acl.impl.ACL.createACE(ACL.java:617)
at com.tssap.dtr.client.eclipse.admin.ui.EditAceDialog$10.run(EditAceDialog.java:367)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.tssap.dtr.client.eclipse.admin.ui.EditAceDialog.buttonPressed(EditAceDialog.java:363)
at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
at org.eclipse.jface.window.Window.open(Window.java:563)
at com.tssap.dtr.client.eclipse.admin.ui.PermissionViewer$22.run(PermissionViewer.java:643)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.tssap.dtr.client.eclipse.admin.ui.PermissionViewer.handleCreateAce(PermissionViewer.java:641)
at com.tssap.dtr.client.eclipse.admin.ui.PermissionViewer.access$1800(PermissionViewer.java:105)
at com.tssap.dtr.client.eclipse.admin.ui.PermissionViewer$10.run(PermissionViewer.java:539)
at org.eclipse.jface.action.Action.runWithEvent(Action.java:842)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:456)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionContributionItem.java:403)
at org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionItem.java:397)
at org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(ActionContributionItem.java:72)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
/code
How can I check if the file is checked out by another user and more interesting which file does the error message mean?
The next question: How can I then unlock the file?
I´m using:
Web AS 640 SP9
Any help is welcome
HelmutHi,
I´ve already had a look at help.sap.com and I also do have the documentation "DTR Authentication and Authorization".
In the meantime I was successful at a SP11 NWDI but at SP9 it is still not working correctly. After restarting the SP9 server I was partly successful (I had to press the OK button of the assignment wizard twice and then the cancel button. After I´ve clicked at the column header of the permissions view the permissions were visible). Unfortunatly I didn´t activate my rights assignments and now I can´t reproduce the successful state.
Seems to be a bug. Does anyone have the same problem or a workaround?
Regards
Helmut -
How to set permissions on a workspace at the DTR?
Hello,
I have my own workspace at the DTR and I would like to prevent other people to modify it. In order to do that I open the permissions of the workspace, set 2 rules:
1. For user RoyC allow all.
2. For "All" deny all.
Yet when I login to the DTR with a different user I am able to work on this workspace freely. Any idea why? Am I doing something wrong here?hi
good
go through these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/b9/b4de3f68d48f15e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/be/0de03f41b9eb06e10000000a1550b0/content.htm
thanks
mrutyun -
Progammically Set DTR to DSR and RTS to CTS?
I am trying to communicate with an extech power analyzer with Labview. Thier data logging software and cable all work. According to the manual. I need to tie RTS to CTS and DTR to DSR.
I am trying to use the Visa commands. Visa Serial, Visa Read, and Visa close for now.
How can I programmically do this?
Thanks
Solved!
Go to Solution.You can Set the DTR and RTS states. You can only Read the CTS and DTR states. (You can also read back the DTR and RTS states).
See attached using Property Nodes.
You can't actually tie the lines together in software, that is done in the cable. But if the cable works with their software, perhaps all you will need to do is assert the DTR and RTS lines in your LV program.
Message Edited by Ravens Fan on 03-11-2009 03:59 PM
Attachments:
Example_VI_BD.png 2 KB -
Hi Experts,
I am working on setting up the permissions for JDI users.
I followed the Note 840523
and set the user NWDI.Dev with role NWDI.Developer which has the actions CBS.Developer, CMS.Display, CMS.Export and LcrInstanceWriterNR
Now when I am able to login to the NWDS using the NWDI.DEV user and am able work fine.
But I when I log into DTR as a web folder, I could browse through the repository folders and it also enables me to delete folder & as an Admin I do not want the developer to to delete these folders.
Can anyone provide me a step-by-step approach to disbale this feature of adding or deleting folder in DTR when you access as a web folder.
Thanks in advance
regards
-LekhaHi Lekha,
this Howto-Guide should give you the answers needed.
In fact, the DTR access is not controled via the UME, but via ACLs that are defined in the DTR.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0f341af-e86e-2910-3e8a-d9e3c227d938">Howto Guide "NWDI roles and permissions"</a>
Best regards,
Timo -
Set older version as active in DTR
Hi community,
I'm struggling with this simple requirement. I want to to set an older version of a WD4J component as active. I can snych it to this version without any problem but when i try to edit and check in, it says that the source is out of synch and i can't do anything. What do i have to do to achieve this?
Many thanks,
TobiasActually i don't look for another "hack" and for web dynpro java this would be great pain to replace it all manually. So the NWDI does not provide this option? This is very very sad... but it fits perfect to some of the previous eyperiences i had with the SAP Java Development .
But thank you for your help Hamendra.
Regards,
Tobias -
Do you have a VI for setting the DTR pin?
I need to control the DTR and/or the RTS pins. Do you have an example VI that manages this?
If you're using VISA, just use a VISA Property node (VISA>VISA Advanced palette) and select the line you want from Properties>Modem Line Settings. If you're using the old serial stuff, open serial line ctrl.vi from vi.lib>platform>_sersup.llb.
-
Reg: Open and Closed Activities in DTR
Hello Guru's,
I am confused with the Open and Closed Activities in DTR, What are the significance of these activities?
And when does an Open Activity changes to Closed Activity?
And why does an Empty Open Activity gets created?
How does the Open Activities effect the Performance of the system?
In NWDS what is the significance of the Public Part and the dcdef xml files?
Please explain and if possible send the links to better understand these? I tried searching for info but with no luck.
Appreciate the Help.
Thanks & Regards,
PramodDear Pramod,
Activity in general can be considered as the wrapper of your changes.
While working in NWDI, any modification that you perform on your source code must be associated with an Activity.
Some Definitions:
Client DTR: Represents the Local Track file system present on you local machine, where Checked-out a desired code from Server DTR
Server DTR: Represents the Central Repository present on the server, where your source code is checked-in.
Open Activities
These are the activities that are not yet checked-in to Server-DTR, and they represent the Open Version.
Exmple:
1) Suppose you have made some modification in "File A" which is associated in Activity-1
2) When you open the DTR Perspective in your Developer studio, you will be able to see all the changes that you have associated in the Activity-1, this DTR-perspective of your NWDS is also termed as Client-DTR.
3) But, when you open the Server-DTR in DTR Web interface, you will not be able to see the same file structure that is present in your client DTR, it will not contain the changes that you have incorporated in Activity-1.
4) The changes present in Activity-A are not available to any other developers, even if you try to use the same developer ID and load the same track, the activities are still said to be purely Local.
Closed Activities
These are the activities that are already Checked-in to Server-DTR and they represent Closed Version.
Example:
1) In the same example explained above assume that we now Check-in the Activity-1.
2) Now, if you open the Server-DTR in DTR Web Interface, you will be able to see the same file structure that is present in your Client-DTR.
3) Now the changes that were present in Activity-A are also available to other developers too.
Open Activity and Performance
1) Open Activities create a temporary entry point reference on the Server DTR you can serach for open activities in Secer DTR web interface, every single activity occupies space on your local machine. So it may affect the performance only if the activity count is very high.
2) In the local file system, the meta data is stored in the .dcdef file in the _comp
subfolder.
3) The meta data is stored in the .dcdef file, every public part has its own meta data file. They are located in the def subfolder of the component and have the fileextension pp.
Every component (DC) is defined by a set of files, stored and versioned together with the
component in the repository.
u2022 A file with the reserved name .dcdef stores the basic attributes such as name,
description and component type, the parent component (if there is one), a list
of child components (if there are any), a list of dependencies, links to the component
sources, and the access control list. The .dcdef file must be stored directly
in the _comp folder.
u2022 The folder _comp/def contains one file for each public part of the component,
which carries the name of the public part with the extension .pp. This file contains a list
of the development objects belonging to the public part and an access control list for
this public part.
Both .dcdef and .pp files are stored in an XML-based format; you can display them in the
content display of the Repository Browser or with any text editor. However, this is
not necessary. To create and edit these files, use the component tools of the SAP NetWeaver
Developer Studio.
In exceptions, you can manually repair the .dcdef or a .pp file of a component.
Note that direct manipulations are dangerous and can render a component
unusable.
I hope you will get a clear picture now.
Regards,
Shreyas Pandya -
Cannot log into DTR with Active Directory User
Greetings,
I have set up and installed JDI correctly. I can log into /devinf, the cbs, cms and sld systems with no problem using both Administrator and my JDI.Administrator that I assigned to an Active Directory user. I can log into the DTR using a user from the database (i.e. Administrator), however, when trying to access the DTR with an Active Directory user, I get the following message:
500 Internal Server Error
SAP J2EE Engine/6.40
Application error occurred during the request procession.
Details: Error [javax.servlet.ServletException: Group found, but unique name "businessUnit.all.guests" is not unique!], with root cause [com.tssap.dtr.server.deltav.InternalServerException: Group found, but unique name "businessUnit.all.guests" is not unique!]. The ID of this error is
Exception id: [0012798F81680042000000090000165C0003FE9AA3C0B86B].
This group exists in multiple domainshowever, this has not caused us any issues to date with our portal and other pieces of SAP WASit's only this DTR error.
Any help is greatly appreciated.
Thanks,
MartyHi Marty,
In the document available at the link enclosed below, there is a part that explains how to configure DTR so that it always uses "Unique-IDs".
http://help.sap.com/saphelp_nw04/helpdata/en/20/f4a94076b63713e10000000a155106/frameset.htm
It is mentioned that this is valid for LDAP, but the information is applicable for Active Directory as well.
Regards,
Manohar -
DTR: Workspaces not shown in Closed Activities view
Hi,
although I have set
'User Filter' = 'All Users'
'Date Filter' = 'Unlimited'
and selected all workspaces in the workspace filter I don't see all workspaces. I only see 5 of total 12 workspaces. For those 5 workspaces the workspace filter works as expected: if I select an entry it will be shown. If I deselect it, it will not be shown any more. For the other 7 workspaces the filter settings has no influence at all.
Thank you for any help,
RémyHello Pascal,
You said: The activities are not part of the cons workspace, therefore they will never be visible there.
Why is it possible to see the closed activities in the browser (http://<host>:<port>/dtr).
I created a differend Workspace Folder 'Prj2' and created 2 Workspaces 'dev' and 'cons'. Create activity and checkin. In the 'closed activities view' for the 'dev' I choose 'Integrate to' and choose the 'cons'. If I go to the 'closed activities view' for the 'cons', I can see the closed activities and that it's integrated from a different workspace.
So I think that it is something else. But what?
Thanks,
Patrick Willems -
Getting a DC broken on importing the track into DTR
Hi,
I am getting an DC broken on importing and creating a DC-dp_logstatus .I am currently using NWDS CE7.1 EHP1 and NWDI as 7.0 SP16 for deployment on PI 7.1 EHP1.Please see build log is as below and suggest.
Build Plugin 'WebdynproPlugin', Version 7.11 SP 5 (NW711_05_REL, built on 2010-05-02 22:28:40 +0200, CL89977)
development component: dp_logstatus (primavera.com)
software component: INSPIRE_GUI_71 (primavera.com)
location: HNI_IG71-604_D
type: Web Dynpro
build variant: default
source location: http://HOSEC6:50000/dtr/ws/IG71-604/primavera.com_INSPIRE_GUI_71/dev/inactive/
output location: E:\NWDS_711_workspace.jdi\0\t2\D18E04A8BC5750E06188A9036E7F0DAA\default
generation folder: E:\NWDS_711_workspace.jdi\0\t\D18E04A8BC5750E06188A9036E7F0DAA
plugin start time: 2010-06-28 16:00:11 GMT+05:30 (IST)
Java VM: Java HotSpot(TM) Client VM, 1.5.0_18-b02 (Sun Microsystems Inc.)
General options:
convert *.xlf to *.properties: yes
include sources for debugging: yes
Warning: Source folder "META-INF" does not exist and will be ignored.
Warning: Source folder "src/configuration" does not exist and will be ignored.
Checking path lengths for sources
Path length checks finished in 0.016 seconds
Preparing data context..
sap.com"), public part "runtime", using legacy mode.
No public part descriptor found for component "tc/je/webservices/api" (vendor "sap.com"), public part "api", using legacy mode.
No public part descriptor found for component "tc/je/webservices/lib" (vendor "sap.com"), public part "api", using legacy mode.
Data context preparation finished in 0.343 seconds
[cmgen] [Info] sap.comtcwdwslibapi~gci.jar - E:/NWDS_711_workspace.jdi/0/DCs/sap.com/tc/wd/wslib/api/_comp/gen/default/public/gci/lib/java
[cmgen] [Info] Optional property i18npath is empty
[cmgen] [Info] Initialize generation templates from configuration jar:file:/E:/NWDS_711_workspace.jdi/0/DCs/sap.com/tc/wd/wslib/api/_comp/gen/default/public/generation/lib/java/sap.comtcwdwslibapi~generation.jar!/AWSModelGenerationConfigurationCompiled.xml
[cmgen] [Info] Using DocumentBuilder com.sap.engine.lib.jaxp.DocumentBuilderImpl
[cmgen] at com.sap.ide.generationfwk.util.xml.DOMParser.<init>(DOMParser.java:81)
[cmgen] at com.sap.ide.generationfwk.util.xml.DOMParser.<init>(DOMParser.java:56)
[cmgen] at com.sap.ide.generationfwk.pp.PublicParts.parsePublicParts(PublicParts.java:62)
[cmgen] ... 62 more
[cmgen] [Warning] Generation of PublicPartFileList.xml failed: null
[cmgen] [Info] Common model generation finished (0 seconds)
[cmgen]
[timer] Common model generator finished in 0.484 seconds
[wdgen] [Info] sap.comtcwdwslibapi~gci.jar - E:/NWDS_711_workspace.jdi/0/DCs/sap.com/tc/wd/wslib/api/_comp/gen/default/public/gci/lib/java
[wdgen] [Info] Optional property i18npath is empty
[wdgen] [Info] Catching throwable null
[wdgen] [Info] java.lang.Exception
[wdgen] at com.sap.ide.generationfwk.pp.PublicParts.parsePublicParts(PublicParts.java:66)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.getPublicPartsForCheckContext(Generation.java:2801)
[wdgen] at com.sap.ide.dii05.util.internal.job.InternalDiiJob.run(InternalDiiJob.java:191)
[wdgen] at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
[wdgen] Caused by: java.lang.IllegalArgumentException
[wdgen] at com.sap.engine.lib.jaxp.DocumentBuilderImpl.setErrorHandler(DocumentBuilderImpl.java:107)
[wdgen] at com.sap.ide.generationfwk.util.xml.DOMParser.<init>(DOMParser.java:81)
[wdgen] at com.sap.ide.generationfwk.util.xml.DOMParser.<init>(DOMParser.java:56)
[wdgen] at com.sap.ide.generationfwk.pp.PublicParts.parsePublicParts(PublicParts.java:62)
[wdgen] ... 63 more
[wdgen] [Warning] Could not get PublicPart[] for CheckContext: null
[wdgen] [Info] Initialize generation templates from configuration jar:file:/E:/NWDS_711_workspace.jdi/0/DCs/sap.com/tc/bi/extwd/_comp/gen/default/public/def/lib/java/webdynpro_generation_core_api.jar!/WebDynproGenerationConfigurationCompiled.xml
[wdgen] [Info] Using DocumentBuilder com.sap.engine.lib.jaxp.DocumentBuilderImpl
[wdgen] [Warning] Component 'SyncStatusComp': Cycle in component usage definitions: SyncStatusComp
[wdgen] [Warning] NavigationTargetReference 'com.primavera.inspire.dp.LogStatusViewUsage1_ToConfirmation_1': Target Inbound Plug ConfirmationViewWinInterfaceView.Default of Link has Type startup. Do not navigate to Inbound Plugs with type startup. The behaviour of this plug type will change.
[wdgen] [Warning] Controller 'ConfirmationViewWinInterfaceView': Cycle in required controller definitions.
[wdgen] [Warning] Controller 'LogStatusWinInterfaceView': Cycle in required controller definitions. There is a controller usage (possibly indirectly via further controllers) to 'SyncStatusComp' which defines a usage back to 'LogStatusWinInterfaceView' Hint: This warning can be ignored as long as there are no cyclic dependencies between context attributes as well
[wdgen] [Warning] Controller 'SyncStatusComp': Cycle in required controller definitions. There is a controller usage (possibly indirectly via further controllers) to 'ConfirmationViewWinInterfaceView' which defines a usage back to 'SyncStatusComp' Hint: This warning can be ignored as long as there are no cyclic dependencies between context attributes as well
[wdgen] [Warning] Controller 'SyncStatusComp': Cycle in required controller definitions. There is a controller usage (possibly indirectly via further controllers) to 'LogStatusWinInterfaceView' which defines a usage back to 'SyncStatusComp' Hint: This warning can be ignored as long as there are no cyclic dependencies between context attributes as well
[wdgen] [Info] Image 'imgPrimavera.alt': Property 'alt' is deprecated. Hint: Instead of the imageAlt text the tool tip is displayed if the image isn't available.
[wdgen] [Info] Table 'tblSapPv': 'Columns' is deprecated. Hint: Functionality is covered in "groupedColumns". Use "groupedColumns" aggregation instead. Use the 'Migrate Columns' functionality to remove this deprecation.
[wdgen] [Info] Table 'tblSapPv': No elements in 'GroupedColumns'.
[wdgen] [Info] ScrollContainer 'scr_logstatus.scrollingMode': ScrollingMode is 'auto' or 'both' and height is not set.
[wdgen] [Info] FlowData 'txvDesc1_2_layoutdata_19_15.paddingRight': Property 'paddingRight' is deprecated. Hint: Use cellDesign instead.
[wdgen] [Info] FlowData 'txvDesc1_2_layoutdata_19.paddingRight': Property 'paddingRight' is deprecated. Hint: Use cellDesign instead.
[wdgen] [Info] FlowData 'txvSAPId1_6_layoutdata_23.paddingRight': Property 'paddingRight' is deprecated. Hint: Use cellDesign instead.
[wdgen] [Info] FlowData 'LayoutData_25.paddingLeft': Property 'paddingLeft' is deprecated. Hint: Use cellDesign instead.
[wdgen] [Info] FlowData 'txvPvId1_10_layoutdata_27.paddingRight': Property 'paddingRight' is deprecated. Hint: Use cellDesign instead.
[wdgen] [Info] FlowData 'LayoutData.paddingLeft': Property 'paddingLeft' is deprecated. Hint: Use cellDesign instead.
[wdgen] [Info] FlowData 'LayoutData.paddingRight': Property 'paddingRight' is deprecated. Hint: Use cellDesign instead.
[wdgen] [Info] FlowData 'LayoutData.paddingLeft': Property 'paddingLeft' is deprecated. Hint: Use cellDesign instead.
[wdgen] [Info] FlowData 'LayoutData.paddingRight': Property 'paddingRight' is deprecated. Hint: Use cellDesign instead.
[wdgen] [Info] FlowData 'LayoutData.paddingLeft': Property 'paddingLeft' is deprecated. Hint: Use cellDesign instead.
[wdgen] [Info] FlowData 'LayoutData.paddingRight': Property 'paddingRight' is deprecated. Hint: Use cellDesign instead.
[wdgen] [Info] FlowData 'TextView1_layoutdata_32.paddingLeft': Property 'paddingLeft' is deprecated. Hint: Use cellDesign instead.
[wdgen] [Info] Table 'tblLogStatus': 'Columns' is deprecated. Hint: Functionality is covered in "groupedColumns". Use "groupedColumns" aggregation instead. Use the 'Migrate Columns' functionality to remove this deprecation.
[wdgen] [Info] Table 'tblLogStatus': No elements in 'GroupedColumns'.
[wdgen] [Info] Table 'tbl_LogDetails': 'Columns' is deprecated. Hint: Functionality is covered in "groupedColumns". Use "groupedColumns" aggregation instead. Use the 'Migrate Columns' functionality to remove this deprecation.
[wdgen] [Info] Table 'tbl_LogDetails': No elements in 'GroupedColumns'.
[wdgen] [Info] Generating packages/com/primavera/inspire/dp/wdp/IPrivateConfirmationPopupView.java
[wdgen] [Info] Generating packages/com/primavera/inspire/dp/ConfirmationPopupView.java
[wdgen] [Info] Generating packages/com/primavera/inspire/dp/wdp/InternalConfirmationPopupView.java
[wdgen] [Info] Searching view element definition for TransparentContainer RootUIElementContainer[Info] Generating configuration/Applications/com.primavera.inspire.logstatusapp.Logstatusapp/wdrr_en.properties
[wdgen] [Info] Creating file configuration/Applications/com.primavera.inspire.logstatusapp.Logstatusapp/wdrr_en.properties not necesseary
[wdgen] [Info] Generating E:/NWDS_711_workspace.jdi/0/t/D18E04A8BC5750E06188A9036E7F0DAA/S2XFileList.txt
[wdgen] [Info] Catching throwable null
[wdgen] [Info] java.lang.Exception
[wdgen] at com.sap.ide.mmservices.generation.dc.DCDependencyInfo.parseDCDependencyInfo(DCDependencyInfo.java:81)
[wdgen] at com.sap.ide.mmservices.generation.dc.DCDependencyInfo.<init>(DCDependencyInfo.java:57)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.generatePersistentArchive(Generation.java:1578)
[wdgen] at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:190)
[wdgen] at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:69)
[wdgen] at com.sap.ide.dii05.util.internal.job.InternalDiiJob.run(InternalDiiJob.java:191)
[wdgen] at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
[wdgen] Caused by: java.lang.IllegalArgumentException
[wdgen] at com.sap.engine.lib.jaxp.DocumentBuilderImpl.setErrorHandler(DocumentBuilderImpl.java:107)
[wdgen] at com.sap.ide.generationfwk.util.xml.DOMParser.<init>(DOMParser.java:81)
[wdgen] at com.sap.ide.generationfwk.util.xml.DOMParser.<init>(DOMParser.java:56)
[wdgen] at com.sap.ide.mmservices.generation.dc.DCDependencyInfo.parseDCDependencyInfo(DCDependencyInfo.java:77)
[wdgen] ... 61 more
[wdgen] [Error] generatePersistentArchive: DCDependencyInfo.xml could not be read (null)
[wdgen] [Error] Generation failed due to errors (4 seconds)
Error: E:\NWDS_711_workspace.jdi\0\t2\D18E04A8BC5750E06188A9036E7F0DAA\default\logs\build.xml:210: [Error] Generation failed!
at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:275)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:114)
at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:57)
at com.sap.ide.dii05.lib.internal.commands.dc.BasicCreateProjectJob.triggerBuildIfNecessary(BasicCreateProjectJob.java:318)
at com.sap.ide.dii05.lib.internal.commands.dc.BasicCreateProjectJob.access$000(BasicCreateProjectJob.java:53)
at com.sap.ide.dii05.lib.internal.commands.dc.BasicCreateProjectJob$1.doInWorkerThread(BasicCreateProjectJob.java:233)
at com.sap.ide.dii05.util.api.job.JdiJob$1.doInWorkerThread(JdiJob.java:77)
at com.sap.ide.dii05.util.internal.job.InternalJdiJob$3$1.run(InternalJdiJob.java:198)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1797)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1779)
at com.sap.ide.dii05.util.internal.job.InternalDiiJob.runInternal(InternalDiiJob.java:305)
at com.sap.ide.dii05.util.internal.job.InternalDiiJob.runR(InternalDiiJob.java:203)
at com.sap.ide.dii05.util.internal.job.InternalDiiJob.run(InternalDiiJob.java:191)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Ant runtime 5.746 seconds
Ant build finished with ERRORS
[Error] Generation failed!
Error: Build stopped due to an error: [Error] Generation failed!
Build plugin finished at 2010-06-28 16:00:18 GMT+05:30 (IST)
Total build plugin runtime: 6.87 seconds
Build finished with ERRORcontiued--
[cmgen] at com.sap.ide.generationfwk.pp.PublicParts.parsePublicParts(PublicParts.java:66)
[cmgen] at com.sap.ide.cmi.generation.Generation.doPersistentGenerationForArchivePublicPartFileList(Generation.java:217)
[cmgen] at com.sap.ide.cmi.generation.Generation.doPersistentGenerationForArchivePublicPartFileList(Generation.java:255)
[cmgen] at com.sap.ide.cmi.generation.Generation.generatePersistentArchive(Generation.java:400)
[cmgen] at com.sap.ide.cmi.generation.console.GenerationConsole.generate(GenerationConsole.java:158)
[cmgen] at com.sap.ide.cmi.generation.ant.GenerationAnt.main(GenerationAnt.java:52)
[cmgen] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[cmgen] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[cmgen] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[cmgen] at java.lang.reflect.Method.invoke(Method.java:585)
[cmgen] at com.sap.ide.cmi.generation.ant.CMGenAntTask.execute(CMGenAntTask.java:211)
[cmgen] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[cmgen] at org.apache.tools.ant.Task.perform(Task.java:364)
[cmgen] at org.apache.tools.ant.Target.execute(Target.java:341)
[cmgen] at org.apache.tools.ant.Target.performTasks(Target.java:369)
[cmgen] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[cmgen] at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[cmgen] at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:114)
[cmgen] at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:57)
[cmgen] at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:196)
[cmgen] at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:168)
[cmgen] at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
[cmgen] at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
[cmgen] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[cmgen] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[cmgen] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[cmgen] at java.lang.reflect.Method.invoke(Method.java:585)
[cmgen] at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
[cmgen] at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:102)
[cmgen] at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:76)
[cmgen] at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:58)
[cmgen] at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
[cmgen] at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1515)
[cmgen] at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:761)
[cmgen] at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:527)
[cmgen] at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:452)
[cmgen] at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:324)
[cmgen] at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:262)
[cmgen] at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:217)
[cmgen] at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:178)
[cmgen] Caused by: java.lang.IllegalArgumentException
[cmgen] at com.sap.engine.lib.jaxp.DocumentBuilderImpl.setErrorHandler(DocumentBuilderImpl.java:107)
[cmgen] at com.sap.ide.generationfwk.util.xml.DOMParser.<init>(DOMParser.java:81)
[cmgen] at com.sap.ide.generationfwk.util.xml.DOMParser.<init>(DOMParser.java:56)
[cmgen] at com.sap.ide.generationfwk.pp.PublicParts.parsePublicParts(PublicParts.java:62)
[cmgen] ... 39 more
[cmgen] [Warning] Generation of PublicPartFileList.xml failed: null
[cmgen] [Info] Common model generation finished (1 seconds)
[cmgen]
[timer] Common model generator finished in 1.453 seconds
[echo] Starting WebDynpro generator
[wdgen]
[wdgen] [Info] Property deployment is true: Deployment information is provided!
[wdgen] [Info] Property sourcepath ...
[wdgen] [Info] D:\usr\sap\HN2\JC20\j2ee\cluster\server0\temp\CBS\35\.B\1982\DCs\primavera.com\dp_logstatus\_comp\src\packages
[wdgen] [Info] Property targetpath: D:\usr\sap\HN2\JC20\j2ee\cluster\server0\temp\CBS\35\.B\1982\t\D18E04A8BC5750E06188A9036E7F0DAA\gen_wdp
[wdgen] [Info] Property archivename: primavera.com~dp_logstatus
[wdgen] [Info] Property vendor: primavera.com
[wdgen] [Info] Property dcname: dp_logstatus
[wdgen] [Info] Property metadatapath: D:\usr\sap\HN2\JC20\j2ee\cluster\server0\temp\CBS\35\.B\1982\t\D18E04A8BC5750E06188A9036E7F0DAA
[wdgen] [Info] Property generates2x is false: S2X files will not be generated
[wdgen] [Info] Property projectlanguage: en
[wdgen] [Info] Property language: Available languages are automatically determined!
[wdgen] [Info] Property addpaths ...
[wdgen] [Info] jxl.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/primavera.com/elib_xls/_comp/gen/default/public/elib_xlsapi/lib/java
[wdgen] [Info] primavera.comjv_confirmationcommandjv_confirmationcommandAPI.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/primavera.com/jv_confirmationcommand/_comp/gen/default/public/jv_confirmationcommandAPI/lib/java
[wdgen] [Info] primavera.comjv_sync_commandbeanjv_sync_commandbeanAPI.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/primavera.com/jv_sync_commandbean/_comp/gen/default/public/jv_sync_commandbeanAPI/lib/java
[wdgen] [Info] primavera.cominspiresc001~jv_sync_ejb_client.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/primavera.com/jv_sync_ejb/_comp/gen/default/public/client/lib/java
[wdgen] [Info] primavera.comjv_sync_wrapperjv_sync_wrapperAPI.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/primavera.com/jv_sync_wrapper/_comp/gen/default/public/jv_sync_wrapperAPI/lib/java
[wdgen] [Info] primavera.comjv_synchlogcommandjv_synchlogcommandapi.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/primavera.com/jv_synchlogcommand/_comp/gen/default/public/jv_synchlogcommandapi/lib/java
[wdgen] [Info] primavera.cominspiresc001~jv_synchlogejb_client.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/primavera.com/jv_synchlogejb/_comp/gen/default/public/client/lib/java
[wdgen] [Info] primavera.comjv_synchlogwrappersynchlogwrapperapi.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/primavera.com/jv_synchlogwrapper/_comp/gen/default/public/synchlogwrapperapi/lib/java
[wdgen] [Info] primavera.comjv_xiconf_commandbeanjv_xiconf_commandbeanAPI.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/primavera.com/jv_xiconf_commandbean/_comp/gen/default/public/jv_xiconf_commandbeanAPI/lib/java
[wdgen] [Info] primavera.cominspiresc001~jv_xiconf_ejb_client.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/primavera.com/jv_xiconf_ejb/_comp/gen/default/public/client/lib/java
[wdgen] [Info] primavera.comjv_xiconf_wrapperjv_xiconf_wrapperAPI.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/primavera.com/jv_xiconf_wrapper/_comp/gen/default/public/jv_xiconf_wrapperAPI/lib/java
[wdgen] [Info] primavera.com~logejb_client.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/primavera.com/logejb/_comp/gen/default/public/client/lib/java
[wdgen] [Info] engine.j2ee14.facade.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/engine.j2ee14.facade/_comp/gen/default/public/api/lib/java
[wdgen] [Info] ecjavajsf~api.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/engine.jee5.facade/_comp/gen/default/public/api/lib/java
[wdgen] [Info] engine.jee5.facade.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/engine.jee5.facade/_comp/gen/default/public/api/lib/java
[wdgen] [Info] tcaiibaseofflinefacade.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/aii/base/offline/facade/_comp/gen/default/public/api/lib/java
[wdgen] [Info] SapMetamodelDictionaryContent.zip - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/bi/extddic/_comp/gen/default/public/def/lib/model
[wdgen] [Info] tcbiwstech_public.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/bi/wstech/_comp/gen/default/public/api/lib/java
[wdgen] [Info] core.exception.lib.api.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/bl/exception/lib/_comp/gen/default/public/api/lib/java
[wdgen] [Info] tcbljrfc~api.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/bl/jrfc/api/_comp/gen/default/public/api/lib/java
[wdgen] [Info] tcblloggingapidefaultttt.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/bl/logging/api/_comp/gen/default/public/api/lib/java
[wdgen] [Info] sap.comtcbl~base_webservices_lib.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/bl/wsproxy/standalone/_comp/gen/default/public/default/lib/java
[wdgen] [Info] sap.comtcsapxmltoolkit.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/bl/wsproxy/standalone/_comp/gen/default/public/default/lib/java
[wdgen] [Info] sap.comtcsecwssecclient~api.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/bl/wsproxy/standalone/_comp/gen/default/public/default/lib/java
[wdgen] [Info] tcwsstandalone~proxy.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/bl/wsproxy/standalone/_comp/gen/default/public/default/lib/java
[wdgen] [Info] com.sap.tc.cmi.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/cmi/_comp/gen/default/public/default/lib/java
[wdgen] [Info] tc~cmi.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/cmi/_comp/gen/default/public/default/lib/java
[wdgen] [Info] SapMetamodelDictionaryContent.zip - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/ddic/runtime/facade/_comp/gen/default/public/runtime/lib/java
[wdgen] [Info] dictionary.rtcontainer.facade.filter.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/ddic/runtime/facade/_comp/gen/default/public/runtime/lib/java
[wdgen] [Info] dictionary.runtime.facade.filter.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/ddic/runtime/facade/_comp/gen/default/public/runtime/lib/java
[wdgen] [Info] dictionary.services.facade.filter.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/ddic/runtime/facade/_comp/gen/default/public/runtime/lib/java
[wdgen] [Info] tcddicruntime~facade.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/ddic/runtime/facade/_comp/gen/default/public/runtime/lib/java
[wdgen] [Info] tcjewebservices~api.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/je/webservices/api/_comp/gen/default/public/api/lib/java
[wdgen] [Info] tcjewebservices~lib.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/je/webservices/lib/_comp/gen/default/public/api/lib/java
[wdgen] [Info] SapMetamodelWebdynproContent.zip - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/wd/api/_comp/gen/default/public/default/lib/java
[wdgen] [Info] SapMetamodelWebdynproResources.zip - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/wd/api/_comp/gen/default/public/default/lib/java
[wdgen] [Info] sap.comtcwdapidefault.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/wd/api/_comp/gen/default/public/default/lib/java
[wdgen] [Info] sap.comtcwdapigci.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/wd/api/_comp/gen/default/public/gci/lib/java
[wdgen] [Info] com.sap.tc.aws.modeltype.content.zip - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/wd/wslib/api/_comp/gen/default/public/default/lib/java
[wdgen] [Info] sap.comtcwdwslibapi~default.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/wd/wslib/api/_comp/gen/default/public/default/lib/java
[wdgen] [Info] sap.comtcwdwslibapi~gci.jar - D:/usr/sap/HN2/JC20/j2ee/cluster/server0/temp/CBS/35/.B/1982/DCs/sap.com/tc/wd/wslib/api/_comp/gen/default/public/gci/lib/java
[wdgen] [Info] Optional property i18npath is empty
[wdgen] [Info] Catching throwable null
[wdgen] [Info] java.lang.Exception -
What are the basic .jar files to be set in web dynpro project classpath
Hi,
I am having a problem while customizing the ESS. I used DTR, DC and imported configuration. After that, I created project from one of the DC(say ess/jp/addr). Later when I open an iView from any Web Dynpro component, I am getting lot of errors without even making any modifications.
I closed the project and reopened it and reload & rebuilt, but it doesn't solved my problem. In my classpath settings I couldn't find any jar files except the jre_lib. Could you please let me know what are the basic jar files we have to set in classpath and where to get them from. We are using NWDS 7.0.06 version.
Can you please let me know how to solve this or any other way to work around this.
It's an urgent to be fixed as early as possible, plz help me out.
Thanks & Regards,
RajHi Julien,
Thanks for your reply.
We imported the the specified SCAs in our track.
we are getting the following errors.
Kind Status Priority Description Resource In Folder Location
Error The import com.sap.xss.per cannot be resolved CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 18
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument fpm of the method loadConfiguration CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 113
Error com.sap.pcuigp cannot be resolved (or is not a valid return type) for the method getNextPerspective CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 127
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument currentPerspective of the method getNextPerspective CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 127
Error com.sap.pcuigp cannot be resolved (or is not a valid return type) for the method getCAPState CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 137
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument perspective of the method getCAPState CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 137
we manually set below .jar files in classpath settings.
pcuixssfpm.jar
pcuixssutils.jar
logging.jar
essper.jar
Is there any alternative to work around.
Thanks & Regards,
Raj
Maybe you are looking for
-
MMS Video missing on the Lumia 800
I have not found any ways to send short videos via MMS from the Lumia 800. The MMS send functionality seem to be limited to pictures. The old Nokia N95 had this beautiful functionality that it somehow compressed HD videos, so you could send them with
-
Is iCloud messing up my iTunes?
Hello everyone, I'm going to get straight to the point - I feel like iCloud is moving my music around in my iTunes library. I've had this problem for quite some time now... so I like to keep my iTunes library pretty organized, and as we all know, iTu
-
Hi Lads, Right now my project is in Requirements gathering stage. I Want to know how many Characteristics and Value fields can we have in ECC 6.0 Apart from the SAP defined. My client is saying they have more than 150 Value fields.. so confused. I do
-
I want to install Mountain Lion on my 2008 iMac. My current OS is Snow Leopard 10.8.6 and there is 4GB RAM. I've heard ML may be too much for this iMac and may slow it down. Has anyone had any problems with this upgrade?
-
DBMS_JAVA not installed
Hi Guys. I 'm using an oracle 10g on a Solaris 10. I discovered that DBMS_JAVA is not installed.I runned the @$ORACLE_HOME/javavm/install/initjvm.sql but I still not installed SQL> DESC DBMS_JAVA ERROR: ORA-04043: object DBMS_JAVA does not exist Best