DTR workspace Basic properties and coustom properties

If i ritght click on workspace, a wizard will be opened with basic propeties and Coustom properties, even though i created workspacefolder,workspace why wizard shows empty properties.
Actually in basic properties it should show
1)creation date
2)creator
3)Name
4) Object Id
C:\Documents and Settings\user\.dtr -> system file in filters i have included workspace path for both active and inactive
why Basic /coustom properties are empty?

Hi RK,
The "Basic Properties" in this dialog refer to the properties maintained by the DTR Server. The "Custom Properties" refer to properties which can be set on a resource by a client (using API only, and not through UI).
The settings you are referring to (in the .dtr folder) are configuration information specific to this user - currently there is no support for viewing or maintaining this information from the DTR Client UI.
Regards,
Manohar

Similar Messages

DTR workspace folders and object location

Where is the workspace folder/resource path in the DTR stored at the unix level? especially the active DCs?
Thanks
Mikie

Hi Mikie,
the DTR workspaces are not stored at the filesystem (directly) at all. They are located in your database.
Hope this helps
Jan

DTR: Workspaces not shown in Closed Activities view

Hi,
although I have set
'User Filter' = 'All Users'
'Date Filter' = 'Unlimited'
and selected all workspaces in the workspace filter I don't see all workspaces. I only see 5 of total 12 workspaces. For those 5 workspaces the workspace filter works as expected: if I select an entry it will be shown. If I deselect it, it will not be shown any more. For the other 7 workspaces the filter settings has no influence at all.
Thank you for any help,
Rémy

Hello Pascal,
You said: The activities are not part of the cons workspace, therefore they will never be visible there.
Why is it possible to see the closed activities in the browser (http://<host>:<port>/dtr).
I created a differend Workspace Folder 'Prj2' and created 2 Workspaces 'dev' and 'cons'. Create activity and checkin. In the 'closed activities view' for the 'dev' I choose 'Integrate to' and choose the 'cons'. If I go to the 'closed activities view' for the 'cons', I can see the closed activities and that it's integrated from a different workspace.
So I think that it is something else. But what?
Thanks,
Patrick Willems

DTR workspace is not modifiable-not able to EDIT track DC- in NWDS.

Hi,
i am not able to EDIT in my project that i creted from ESS track of NWDI.
i am getting the following error:-
Checkout is not possible. See below for details.
Component com.sap.xss.hr.per.us.bank.cc.CcPerBank
======>problem: DTR workspace is not modifiable /DID_ZTECH_Dessusbanksap.com/Model Folder/src/packages/com/sap/xss/hr/per/us/bank/cc/CcPerBank.txvWDComponentDiagram
======>problem: DTR workspace is not modifiable /DID_ZTECH_Dessusbanksap.com/src/packages/com/sap/xss/hr/per/us/bank/cc/CcPerBank.wdcomponent
please suggest me the needful
thanks
Narpal

ok thank for reply.
i can modify now my code but when i have created the track i have given my development server details under runtime. But i chaned that once QA1 by mistake and later relized then again reverted back to development.
so in this case do i need to import/check-in all software component again in my track?
Now i am having the original system details.(that i gave at the time of track creation and import ESS).
thanks
Narpal S Sihag

Problem: DTR workspace is not modifiable

Hi all,
I'm not able to edit projects anymore in NWDS.
When the popup appears for checkout it says that :
Checkout is not possible. See below for details.
The operation requires the writeability of the following Objects:
View com.xxxx.sap.xxx.xx.comp.bupa.view.BuPaFavorites
======>problem: DTR workspace is not modifiable
I'm quite sure I have the right authorizations on the NWDI as I've already been able to edit and deploy before ...
Timeframe when this occurs is after upgrade of Development configuration pool server, don't know if this has some effects on the issue ...
Thx for your input.

HI
Goto -
> Src folder of ur DC and right click and make readonly property disable then you can able to modify the project....
Thanks
Kirankumar.M

DTR workspace is not modifiable

Hi,
I am trying to checkout a DC from one the tracks and it is giving read only error "DTR workspace is not modifiable"
please help me how to resolve this issue .points will be awarded for sure

Hi Bala,
1. Check if you have the permissions (Access,Read, Write,Checkin DTR permissions) on the SC (from which you are trying to check out a DC).
2. If the DC is already "Exclusively" checked out by another user then you will not be able to check out.
3. Sometimes if you are in a wrong perspective in the NWDS and if you are trying to check out then you would get the error "DTR workspce not modifiable"
Check for the above conditions and still you are unable to proceed post more information on how you are trying to check out a DC.
Akshatha

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split i have a new laptop and now it keeps asking for the old ID or it'll erase my apps bought on theold account.

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split up and now im trying to get all my apps and info onto my new laptop with a new account but it keeps asking me for the old apple ID which she is still using and she changed the password. i tried backing it up but still nohing. When i try to back up purchased items being apps etc its keeps asking for the old one. help

See Recover your iTunes library from your iPod or iOS device. But you'll still need the password.
Once you have the computer authorized to use the account she could change the password again to stop you buying apps on her card (assuming it's not on yours!). It would lock you out of upgrading them too but they should work unless she uses the deathorize all feature.
It depends on how amicable the split is...
tt2

I have a new mac book pro (sept 2014) and am suddenly stuck on the log-in screen. Keyboard input not working to enter my password. Already tried a basic restart and a cmmnd/ cntrl/ pwr troubleshoot to no effect.

I have a new mac book pro (sept 2014) and am suddenly stuck on the log-in screen. Keyboard input is not working to enter my password. Seems to be a log in issue as keyboard works for forced troubleshooting. (And b/c when I first noticed the problem, I was able to enter my log in password but then everything sort of froze. Now, no ability to enter the password.) Already tried a basic restart and a cmmnd/ cntrl/ pwr troubleshoot to no effect.

Reset PRAM: http://support.apple.com/kb/PH14222
Start up in Safe Mode.
http://support.apple.com/kb/ph14204
A new Mac is in warranty for 1 year from the date of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare or take it to the Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

Error when opening workspace, web analysis and shared services

Hi All,
We installed hyperion 11.1.2, Essbase on a AIX server, with reports etc on a windows 2008 server. when logging onto workspace, web analysis and shared services i get the following error message:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If we re-start the server it sometimes work, but in the morining we have the same issue, can anyone help.
Thanks
Dylan

Hi,
Restart the services. Issue with Oracle Http server. If you restart foundation and other services I can bring workspace up.
Thanks
Radhika

Difference between Basic Component and Standard Component

Hi Iam just learning JSF, at the same time I try to learn to use Sun Java Studio Creator at the same time. May I know what is the difference between the Basic component and the Standard component in the IDE.
I have been using the Grid Panel, each time I need a header I manually t ype
<f:facet name="header">
</f:facet>
in the JSP source code. How can I do this visually?
Thanks,
james

The Standard section in the Palette contains the JavaServer Faces reference implementation components. The IDE provides the standard components for backwards compatibility with projects that were built with earlier versions of the IDE. Because the standard components provide less functionality and require more programming, you should use the visual components from the other Palette sections.
I do not know the answer to your second question.
Chris

Basic Start and Finish Date coming as default while Order Creation (IW31)

Hi Members,
I am in situation where in i am trying to cretae an order from IW31 but after the order creation basic start and basic finish date is being updated as default date which is the current date of creation.
I have written my code in Include LCOINFNJ where basic start and basic finish date should get populated as per my written code .After debugging i found that the code is populating the dates in structure CAUFVD-GSTRP(basic start date) and
CAUFVD-GLTRP(basic end date) but whill posting at user command SAVE the fields are getting updated back to default dates.
Even after adding an enhancement point at the end of below given FM where in i am hardcoding the values still the issue remains the same .
Function Module : CO_ZV_ORDER_POST is the FM responsible for posting.
Please help regarding this issue .
Thanks and Regards.
Gaurav Chopra

Hi ,
If you do not want start and finish date as current date then u can do it via config
spro ->pm -->maintenance order processing -->Maintenance and service orders -->general data -->Activate default date for current date as basic date here for a particular plant remove the tick mark in default current date , thus when u create MO on that plant then u will not get any default dates in basic start date and finish date ...
regrds
pushpa

What kind of mac would I need for Nexflix, basic search and email? Also, sounds silly, but can I connect an HDMI from Mac to tv?

What kind of mac would I need for Nexflix, basic search and email? Also, sounds silly, but can I connect an HDMI from Mac to tv?

Just an FYI. The Macs named PowerMac date from early 2006 and before. Use this tip to discover where to post once you get your Mac:
Site map of Communities and Categories
The cheapest Mac available new is a Mac Mini. It is no bigger than many an external hard drive. But the screen and keyboard and mouse must be purchased separately. They support USB and Bluetooth keyboards and mice, and pretty much any DVI, HDMI, or displayport display. Although the iMac is certainly an attractive option if all you want to deal with is deciding on a printer. I still recommend getting an Apple USB keyboard for the occasional times you may need to troubleshoot startup issues. Normally not a problem, but as it gets older some issues can be fixed at startup or diagnosed at startup.

TDS certificate not showing Basic, surcharge and education cess separately

Hi
i created three codes as basic, surcharge and for education cess. I have also mantained the J_1IEWT_SURC table and J_1IEWTSURC. But i am getting error in mantaining table J_1IEWTECESS as View/table J_1IEWTECESS can only be displayed and maintained with restrictions.
Please suggest me how to mantain J_1IEWTECESS table.
Surender Kumar

Hi
Please maintain as follows:-
1) spro-> Financial Accounting Global Settings (New) -> Extended Withholding Tax -> Calculation ->India -> Surcharges -> Maintain Surcharge Calculation Methods - check box should blank
2) spro-> Financial Accounting Global Settings (New) -> Extended Withholding Tax -> Calculation ->India -> Surcharges ->Maintain Surcharge Tax Codes (Separate Tax Codes) - This place should be blank
3) spro-> Financial Accounting Global Settings (New) -> Extended Withholding Tax -> Calculation ->India -> Surcharges -> Maintain Surcharge Rates (Surcharges Combined with Basic WH Tax Codes) - At this place maintain surcharge rate e.g. 10% against each company code and tax type/tax code on which surchage applicable.
This will resolve ur problem. In case any problem pl write back.
Regards
DD

Basic customs and import cess flowing in MIGO

Hello ,
At present basic customs and import cess are flowing in the MIGO document,. The requirement is not to display the basic customs and import cess to flow.
Please let us know the config related to it
thanks

Hi,
In import business process we have 8 component.
Basic Price
Custom duty -
> none- CENVATABLE
Ed cess on custom duty -
> none - CENVATABLE
High Ed on Custom duty -
> none - CENVATABLE
CVD -
> CENVATABLE
Ed cess on CVD -
> CENVATABLE
High Ed on CVD -
> CENVATABLE
Additional Custom duty -
> CENVATABLE/none -CENVATABLE
when ever you will create GR for import PO, entire cost occuring at custom office will be loaded to material cost out of which CVD, Ed cess on CVD, High Ed on CVD CENVATABLE and Additional Custom duty exception for which some company take credit for Additional Custom duty and some company they dont take credit for Additional Custom duty.
at GR level system will generate document.
Stock account
GR/IR acct.
friegt acct.
this the way any standard system is configured.
you have to decide whether marial is CENVATABLE or not, if it is CENVATABLE then CVD posting will take plane if it is not then only custom duty posting will only take place.
hope this info. will helps you to post your GR.
manoj singh

Idoc basic type and extension copied to new extension now how to trigger

HI EXPERTS,
I have copied a basic type and extension of idoc and now my new idoc has extension name say ext1.
my old extension name is ext .
now i want to trigger an idoc with ext1 extension ,i do not want to change idoc settings in we20.
how can i do this ,please some one reply .
Thanks,
Pradeep.

hi nikhil,
reason is we want two different transport paths ,one team is amking changes to existing things ,i am working on another pahse of project .
I have almost reached near to the solution .i have set the message variant in we20 ,now when i trigger its generating 2 idocs
i am trying to write code in exit but in exit there there is no field idoc_mescod or idoc_cimtype
Kindly suggest!!!1
Thanks,
pradeep.

DTR workspace Basic properties and coustom properties

Similar Messages

Maybe you are looking for