DTS, AC3 won't work

I am linking my Macbook Pro via HDMI to my TV and my polk audio surround bar to watch movies off my hard drive.
I am using divX 7 to open the movies. All the video is working, however the Audio on my AC3 videos is only playing static and on my DTS movies the audio is not playing at all and it just gives a warning saying that I need a Quicktime codec 8193.
I haven't been able to find the 8193 codec.
I have quicktime 10, Perian 1.2.3 and the latest DivX 7 plus. I also have VLC. The audio works through VLC however it is not AC3 or DTS quality.
I have enabled both the passthroughs as per the instructions at this link www.cod3r.com/2008/02/the-correct-way-to-enable-AC3-passthrough-through-quickti me/
Things I have tried:
I have deleted DivX and re-installed it.
I have deleted Perian and re-installed different versions.
Ran software update on my mac.
Opened with QT (Perian).
Cleaned up the quicktime/library codecs as per Perians recommendations on their support page.
Searched unsuccessfully for 8193 codec.
My macbook pro is running the following:
Mac OS X 10.6.8
2.4 GHz Intel Icore i5
Memory 4gb 1067MHz DDR3
Any help with this problem would be greatly appreciated.

This is usually a type of question way outside of the skills of people here, but who knows, I'll bump it just in case.
Only thing I could think of is that you have an older MBP where you need a separate digital optical cable. As for the 8193 Codec, it's of course a newish DTS encoder/decoder. If you were using Final Cut Pro X, you'd have it, but that'll cost you a few bucks.
Try this:
http://qt-ac3-codec.en.softonic.com/mac
I don't know if it's a safe download, but give it a try.

Similar Messages

Multi-angle won't work..please help!

This problem is using version 2.0.0 (sorry, I hope someone out there still remembers) and has been replicated on two seperate computers. The first is an ibook g4 1.33ghz with 512 ram...the second a dual g5 2.0 ghz with a 2 gigs of ram. The problem occurs during the build. On the g4 the problem crashes the program, on the g5 there is a internal muxer error and the build process cannot complete. I first noticed the problem with a big project that was mostly audio with slide shows...so I stripped it down to the bare essentials and the problem is still there. This is what I do: new project> import 3 aiff files (16bit/48khz) and 2 jpg images > copy the first jpg into a slide show 3 times and add one aiff to each slot > convert to track > add the second jpg into video track 2 under each of the first jpg's (the size auto-matches) > make basic menu to start playback of slideshow > simulation works fine, angle switches fine > crashes or stops on build (depending on computer using)
things i've tried that haven't worked > different jpgs, ones that have the same dimensions > fix markers in the track menu preferences > tried using my internal drive instead of external for both originating files and build files > if i delete the second video track of jpg's the build goes fine so this is definatly a multi-angle issue...I've heard of bit-rate issues with multiangle, but these are jpg's, there is no video...
Someone PLEASE help me
Thanks

Ok thanks for the help... I don't know how helpful it will be though... let me explain what I'm trying to do, which will explain why some of your suggestions wouldn't work. I record live concerts and I'm just trying to fit a full concert onto a dvd. I would like chapter markers at the beggining of every track, though I would like absolutly no pauses between tracks (tracks have been cut to cd sector boundries of 1/75 second, which seems to work fine on DVD even after converting from 44.1 to 48. ). I would like 2 menus ... a welcome screen and a setlist screen linked to each song. I would like the show to play in it's entirty with a bands logo on the screen (which is the first JPG) and have the second angle just black (to save tv sets from frying). If the show is 20 songs then I create a 20 slot slide show with the bands logo and the 20 songs. I then covert this to a track...as this is the only way to add an alternative angle. If I don't add 2nd angle of black, the burn goes fine, if I do then it crashes.
Now if I were to encode the jpg's to mpeg2 before adding to the project this would mean I need over 3 hours of each, cut in 20 different spots that correspond exactly to the audio.
Now the quality of the audio is very important to me so I'm not willin to use any lossy compression scheme. The whole disc is really just for listening too and is of an audiophile nature. Now I understand AC3 does a pretty good job, which is fine for movies, but for my purposes I need it to be exact. So this means I would have to fit the 3 gigs of audio along with 6 HOURS of mpeg2 video encoded from the 2 simple jpg images that take up less than a mb themselves. This is simply too much data, I can't fit it onto the DVD.
What's nice is what DVDSP is suppose to do is convert the jpg's for you and they only then take up a very small amount of room, and stay on for the full 3 hours none-the-less.
So you see any workaround that envloves making the slideshow as video in FCP beforehand won't work because I'm going for 2 angles at over 3 hours with uncompressed audio.
Now you say that DVDSP converts the jpg's to mpeg2 anyway so I figure it must just keep looping the same video over and over to save room..because there is no significant increase in size from adding the jpg. It's definatly not making a 3 hour mpeg2 file. So if I encode the jpg beforehand, say for 30 seconds...how do add it to the project in such a way that it just loops the video over and over to save room (the same way it does internally with the jpg) Keep in mind I need to make the video fit the audio tracks exactly with chapter markers inbetween. When adding jpg's to a slideshow and then converting to a track this is done automatically and when I add the second jpg to V2, the length auto-matches to the chapter markers. So it's very easy when working with still pictures ... but how do I do it so simply with a 30 second mpeg2 clip? And make sure that it's always referencing the same clip without having to add it umpteen times and thus uincrease the disc size beyond capacity.
Now as for the multiangle encoding fix ... lets say I proceed with the two jpg images as they are and let DVDSP do the encoding... I want to make sure both streams are compatible which is probably why the build hasn't been working.... I know the markers and length are good because the slideshow added them and the second jpg autosizes to them...and i have fix markers checked in track preferences. But how do I make sure that they have the same GOP structure and that they will have the same bitrate? Now the pics are very different so a different bitrate is expected. One is just black and the other is a band logo. But I tested it with identical pics in both video tracks to see if it was a compatability issue and the build still failed.
Ok so I don't neccesarily need to use jpg. The band logo is jpg but I can convert it...the black is just a slug from FCP exported as a still. What's the best format to use for what I'm trying to do? What has the best success rate for encoding? Also you mention having access to a decent encoder. For $1000 i was hoping that I was getting one in the package ... bewtween FCP, quicktime, compressor, or DVDSP ..it's rediculous that a decent encoder wouldn't be included... what would you consider a decent encoder ... and of the ones I have which one should I be using (for future projects involving video)?
I know this is a tough one, I appreciate any help that can be given.

HP LaserJet Pro C1415fn color MFP - fax won't work

I have a LaserJet Pro CM1415fn color MFP on a Windows 7 64-bit laptop. I've been using the printer for two years now.
At the moment the fax function only works if I use it manually (i.e. if I place a sheet of paper on the scanner, select the "Fax" button on the printer touch pad and dial the number). However, if I want to send a fax via the PC interface, it won't work.
For example, if I open a PDF, click on "Print" and select "HP LaserJet Professional CM 1410 Series Fax", nothing happens -- no window/interface will open. If I select "HP Send Fax" or "HP Fax Setup Wizard" from the program menu, nothing happens.
I've always been sending faxes this way and I just don't know what happened... Can anyone please help?
Thanks in advance!
Claudia

Hi @Clabee ,
I see that you can't fax from the PC anymore. I can help you with this.
If this just recently happened, I would do a System Restore back to when everything was working properly.
System Restore for Windows 7.
If you would prefer not to do the System Restore, uninstall and reinstall the printer software. It might become corrupted.
Here are the steps to run the uninstall from the computer or the CD.
To uninstall from program files:
Touch the Windows key and the E key to access the computer window.
Select the C drive.
Select program files or program files x86.
Open the HP and printer name folder.
Select uninstall.
Uninstall the software from the CD:
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
Disable all the start up programs and temporarily turn off the Antivirus Software. How to use MSCONFIG .
Click on the start up tab and click disable all.
Download, save and install the latest drivers.
HP LaserJet Pro CM1415fnw Color Multifunction Printer Drivers.
Test the printer and try sending a fax again from the PC.
Then you will need to go back in and enable the start up programs and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

IPhoto and Apple ID won't work after system update

I've recently updated my MacBook Air to OS X v10.9.4. iPhoto won't work as i am currently using v9.2. I've tried downloading a later version but have been advised that my Apple ID will not work on this computer. NB. I have an iPhone but have not used the Apple ID on this - to my knowledge, or another Apple ID on my system. I'm a basic level user so any advice on this would be great.
Many thanks,
Elza

have been advised that my Apple ID will not work on this computer
Advised how, exactly?

PDFMaker loads but won't work in Word 2013 - Acrobat XI and DC - Win 8.1 Pro

OK, I opened a question that never got answered and it never was resolved...
Just updated to Acrobat DC - same problem exists...
I'm running Windows 8.1 Pro fully up to date..
I've uninstalled and reinstalled Office 2013 Pro (I have an Office 365 subscription so it's the click-to-run install).
I've uninstalled and reinstalled Acrobat Pro DC.
I've rebooted (a full restart, not Win 8's fast boot restart) between each installation.
I've tried this in multiple Office applications, none of them work EXCEPT for Outlook.
For the following I will use Word as my examples...
I've uninstalled all plug-ins and still it won't work.
I've tried running Word as Administrator.... still won't work.
OK... so this is what it looks like... as you can see the toolbar loads, but no icons...
https://www.dropbox.com/s/wsbs4kon3z4e965/Word%20Acrobat%20Screenshot.jpg?dl=0
When you click on those buttons... it goes through the motions as if it were creating the PDF... but no file is ever created...
If I right-click on a Word document and select Convert to PDF - it goes through the motions of creating the PDF, asks me where to save... and then a dialog box named "Acrobat PDFMaker" comes up saying " {Exclamation Point Yellow Triangle Icon} An unexpected error occurred. PDFMaker was unable to produce the Adobe PDF."
If I right-click on a text file... and select Covert to PDF, it immediately pops open a PDF of the text file. Same with any image file.
This was all working perfectly up until out of nowhere it stopped working on January 26, 2015. See my original posting here: Acrobat XI Pro Word 2013 add-in stopped working
I can Print to PDF using the PDF Printer without any problems.
Creating a PDF in Outlook, no problems...
I'm hoping somebody can figure this one out... I'm completely stumped.... and I'm usually very good at troubleshooting stuff.

Click to Run according to Microsoft:
https://technet.microsoft.com/en-us/library/jj219427.aspx
"Click-to-Run is a Microsoft streaming and virtualization technology that reduces the time that is required to install Office and helps you run multiple versions of Office on the same computer. The streaming technology enables you to download and begin to use an Office product before the whole product is installed on your computer. The virtualization technology provides an isolated environment for Office to run on your computer. This isolated environment allows you to run the latest version of Office side-by-side with an earlier version of Office that is already installed on your computer."

WEP Password Won't Work!

I have a Wireless router, which can do WEP, WPA and WPA2 encryption. If I have WPA2, then my desktop (Windows) can't remember the password, so that encryption is out for the mo, WPA won't work on our old laptop, and so WEP is all that's left. Every device in my house (including my iPhone) can connect, but my MacBook fails too! I have tried loads of different WEP passwords, and it can still connect to other WEP protected networks, but not mine! Is there anything I could have done, or is this a general problem?

Just like Windows stores your network profile info in C:\Document and Settings, the mac stores your network location in a plist file.
WEP is really for B/G networks, most newer networks are using WPA/WPA2 because it is more secure.
Can you connect to WPA2 Personal with the mac and that router?
Can you create a new Windows profile under network settings? (you should be able to).
Sometimes if you cannot connect using ASCII character for the password, look at your Key 1: on Windows for the Hex version of the password and try typing the Hex in the password box.
IF your password for WEP is short, like less than 8 characters, that may be the problem, it order to get WPA2 you need a password at least 8 characters long, 10 is better and more accepted by encryption schemas. Try adding 1234 to the end of your existing password (i.e. password1234) in the router, then input it again to see if it works. Try making the password exactly 10 characters long if you can.
WEP is like having no security at all, WPA/WPA2 is much more secure.

ITunes password won't work

Aplle TV keeps telling me to put in my password but when I do it won't work. But I checked it on iTunes and it worked there, as well as online. Then I went online and changed it but Apple TV still won't accept it. What gives?
Edit: Nevermind it's working again. I had to reset Apple TV.
Message was edited by: TomCat4680

Try some of these things
http://www.apple.com/support/itunes/troubleshooting/

Wireless password won't work

trying to connect to wireless at work, but the password won't work.... i try'd the same password on ipod... works fine... also i can use wireless at home... no prob....
any ideas?

Powerbook G4, you may have a wireless card that is too old and doesn't support newer encryptions schemes like WPA or WPA2. What are you using as your wireless encryption algorithm at home?
Per my profile, you can see that I have a computer designed and manufactured eight years ago. It uses an old 802.11 "Airport" card; not "Airport Extreme" as does my Mac Pro. It doesn't do WPA or WPA2. If the wireless access point (WAP) at work is using those, you'll be prompted for a WEP password because your computer doesn't know any better. But it won't work.
So first thing you need to do is find out what does the WAP use. Next thing you need to do is go into your System profiler and see what kind of Airport card your Powerbook has.
If it's not an "Extreme" or "Express" or whatever, just a plain ol' "Airport" card, then you are SOL trying to use that to connect to your work's WAP if they are using WPA or WPA2. There are some USB wireless thingies that you can plug in to an available USB port and you can use that to access the work (and home) networks. I know that BDAqua has previously posted a URL or three that point to some inexpensive USB 802.11 transceivers that you could use on your Powerbook.
As a side note, if this is indeed the case for your situation, this would also imply that you are probably using an inferior (as in hacked/cracked) wireless encryption protocol at home. Once you get a WPA2-capable USB thingy, get in to your router's wireless setup and change it to WPA2-PSK-AES.

Flash is up-to-date, but Plugin won't work

Hi!
I'm using Firefox 29.0.1 on Windows 8, (also up-to-date), and Flash plug-in won't work. I re-downloaded & installed Adobe Flash 13.0.0.214...I verified it on their website, but I can't get the plugin to work. I had no problem with it earlier today, but for some reason it won't work anymore.
PLEASE HELP!
Thank you,
Nuts4Mutts :(

Hi!
Yes, I checked on Adobe's site THREE TIMES & I have the latest version, & the animations they have on their site worked fine...I saw them perfectly, (both the red cube bouncing around & the cartoon tree with the animated yellow & orange colored leaves). I'm at a loss why on most sites I have no problem watching streaming video, but on 2 of the other sites that I watch EVERY day, I suddenly get the "Error loading plugin" message on a black screen. It's driving me nuts, as I was watching these sites earlier this morning & everything was fine. The confusing part, to me at least, is why is this plug-in problem is ONLY affecting 2 of the sites I watch AND why did it happen out of the blue...I was watching them without any problem early this morning, just like I do ALL DAY...EVERY DAY!!! (I watch several wildlife live-cams, so it's important that I keep up with changes in the birds I normally watch). None of the other sites I watch are affected...what would cause this to happen?
I even did a complete shut-down of my laptop, waited, then re-started. Usually, this would fix just about anything...for some reason, I can't get the video stream on 2 cams...I can still view the other cams I watch, though.
I DID install MS's weekly updates, but it didn't affect my ability to see streaming video on most of the sites I watch; so far only on 2 of them.
I only have the pop-up blocker that comes with Firefox, but other than that there's nothing else in my add-ons that could interfere. I checked my plugins several times, just to make sure Flash was up-to-date & they're fine, too. The mystery is why I can see my wildlife cams on 4 of the sites I watch but not on the other 2, especially when I was watching them early this morning!!! I feel like I've been dropped-off in some sort of cyber-space time warp, or in the twilight zone & I'm ready to scream!
If there are any other suggestions, please post them...I'm very behind in my cam-watching!
On another Firefox-related problem...where do I post a question about some add-ons not working or being visible AND not being able to customize since the last update? I know...I'm just having a very confusing, frustrating day!
Thanks again for your ideas...I need all the help I can get!
Nuts4Mutts :(

TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
1. The phone charges it's battery
2. I can open it in My Computer and import/export media files.
In iTunes
3. It start to sync until step 3 then stops.
4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
I hope you can provide me a solution for this problem.
Thanks,
Ralph

Hi ralphagir,
Welcome to the Apple Support Communities!
For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
Safely disconnect iPod
http://support.apple.com/kb/HT1853
Have a great day,
Joe

How to sync icloud with itunes have two different id's on ipod and password won't work for one of them not even the old one

Hi all,
I recently updated my itunes/istore id. Now my ipod touch won't recongized the id for the cloud. It works fine for the rest of the ipod but my old id (email) is still on for the cloud how do I change so all is the same. BTW the passwords old and new won't work with the old id... Should I put it back in?
Any help would be great!

Let me clarify if needed... the id I'm talking about is the email address...
Thanks again

I installed Firefox for Mobile on my HTC Droid Eris but it won't work. Why?

I have an HTC Droid Eris and it runs the Android 2.0 operating system. When I attempt to open it I receive a message that says: "This device does not meet the minimum system requirements for Firefox".
The website states: "Firefox 4 Beta is available for Android 2.0 or higher" so I do not understand why it won't work on my phone.

See this web page for system requirements, and an experimental version that might work on the Droid Eris: https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements

I forgot my password and am trying to reset my ipod,but it won't work. It says that my ipod is in recovery mode and that I must restore it. I click ok, and then restore, and then restore and update. then it says contacting ipod software update server and

I forgot my password and am trying to reset my ipod, but it won't work.It says that my ipod is in recovery mode and that I must restore it. I click ok, and then click on restore and update. Then it says connecting ipod software update server and a screen pops up with ipod software update on the top and iOS 5.1. It lists a bunch of stuff this update contains and on the bottom it says next, which I click and nothing happens, it just goes back to the ipod restore page. Help, what am I doing wrong?

This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

Adobe Flash Player Won't work!

I am trying to use Adobe Flash Player on my account on me and my brother's computer. We have Windows 7. My brother's account's Flash Player works fine on his, but my account, no matter what I do, won't let player work. I thought it had something to do with our antivirus program, Kaspersky PURE 3.0, but turning it off or temporarily disabling it doesn't seem to help at all. Please help me ASAP, thanks!

Sorry I didn't explain that. "Won't Work" means that when I try to play a game on the internet that uses Flash Player, it won't start (usually just has a black window where the game should start up).

DTS, AC3 won't work

Similar Messages

Maybe you are looking for