DTS Neo PC Not Working!

Hi, I can't get DTS Neo Pc to work, i've tried the three console modes but it still don't work. it says it doesn't support the selected sampling rate (set to 24bit 48000 tried 6bit too)
i tried downloading the latest version of DTS connect pack from Creative but still the same.
I have the X-FI Titanium
using Dan-k Titanium installation disk
anyone else got this problem?
Edit: just installed the new console launcher beta and DTS connect has disappeared.

Uninstall old Creative apps as well as drivers. See page 19 in the user guide. Sort the programs and features list on "Publisher" to see all installed Creative apps. IIRC, the "What u Hear" slider, and associated balance sliders, control volume when the cinematic DDL or DTS encoder is selected but not when the PCM advanced feature is selected.

Similar Messages

DTS Surround Sound not working after DTS Update...

I reset my brand new laptop to factory specs--then did the toshiba updates, then windows 8.1, then more toshiba updates which included a DTS update. PRIOR to the updates, DTS worked Perfectly. AFTER the updates, DTS Surround Sound Virtually Muted The Music Entirely. If I turn off Surround Sound, the other DTS parametes/selections Do Work. Nonetheless, I would Love to Have the Surround Sound back in operation. Any suggestions? Thanks!!
OH--and my Realtek HD audio manager in control panel has options not available
such as speaker configuration, and default devices.
Mark

I too have roblems with my DTS after updating to 8.1. After the latest update for the DTS there is at least he console there, to where before I had nothing. That was from the desktop assistant under the "Media and Entertainment". So now it looks as if every thing should be working, but the sound is horendous! With out the DTS's help/
I have the "Satellite C55-A-5300, PN PSCFEU-00MOOG. I just passed the 1 year ark since pprchasing this unit.
I have not had the DTS working at all for about 8 months.
Thanks, Ron

K8N Neo Platinum not working

Hi guys,
I finally tired of my old PC and decided to go for a new AMD64+ system. I ordered these components:
A64 3000+
K8N Neo Platinum
2 x 512 MB Corsair XMS3200 2-3-3-6 RAM
I turn the finished PC on, the fans power on, the harddisks make noise and... nothing. The monitor doesn't recieve a signal. According to the DLED-bracket, it hangs on 'Resource Assignment' every time, just before the harddisks are started.
I have tried just about everything, even booting with only the videocard (both R9700 Pro and GeForce 3), still no dice.
I have tried running only one stick of RAM in the different slots, not a success.
I don't have any other CPU or RAM to test it with, so those options are out.
Another culprit is the PSU, but I have a new Mist (Factory modded Fortron / Source) 480 W PSU capable of 22 Amps at the 12V line, so that shouldn't be the problem. It works with good ratings in my old PC.
Any more ideas? It does look like I will be taking it back on Monday.

Quote
Originally posted by RexB
bump. Hi gcb, welcome You'll soon get an answer from a K8N Neo Plat owner. In meantime, pls post your full stats in your sig {add a sig to your "profile"}. Help us help you.
Done
Quote
Originally posted by Jasonxxx
If you could tell us you entire system specs....That means everything and how you have it installed and setup...
Stats are posted, but as I mentioned, even the barest possible setup with a RAM stick and videocard refuses to work. That's without keyboard, mouse and hard disk.
I'm not sure what I can add to that other than saying I can't even get into the BIOS since I get no video.
I forgot one thing: The PC speaker beeps once for about a second. Slightly longer than my old PC did, but not long enough for me to really think about it. Definitely nothing compared to the crescendo I got once when I forgot the extral power to the R9700
Quote
Originally posted by NewNeo
What you describe is how my so-called "cold-boot" problem began. Eventually, I was able to get a boot, but subsequently, anytime the PC was powered-off and left off for a few minutes, then powered-on, the PC would behave in exactly the same way you describe here.
I have since RMAd the board and ordered (additionally) an ASUS K8N-E Deluxe which will be here Monday; I ordered Friday from NewEgg and a check of Fedex indicates that the ASUS package is already at the local dock. My sense from these forums is that the NEO has too many issues to ever satisfy me as an owner, including the ones I have personally experienced and the ones I have only read about. Thus, I'm trying the ASUS. If all goes well with the ASUS, I'll have an extra, brand-new in the box MSI K8N Neo.
See here for some descriptions of my MSI Neo "cold-boot" problem:
https://forum-en.msi.com/index.php?threa...htuser=0&page=1
You may find additional info by searching on my forum psuedonym.
As far as a fix, I just kept wrestling with it till it would finally boot (off/on, disconnecting / reconnecting leads, etc .... nothing ever consistantly did the trick) but I always manged sooner or later to get a boot. Pressing and holding the DEL key or quickly tapping the DEL key as the PC was powered-on seemed to have some connection with success, but only after many failures of the same thing. As I said, very inconsistant. A warm boot, once the PC was running, usually went fine, barring any other unrelated issues.
By the way, my D-Bracket error code always hung at one green LED, lower left in the 4 LED array, which I think indicates initialization of the keyboard controller. Whether this was the cause (keyboard controller) or it just happened to be the point in time where some other problem arose which prevented boot is hard to determine.
Damn, that's a bad experience. I haven't tried banging keys around, perhaps I should try that.
I had a chat with another guy who had a problem akin to this. In his case, the BIOS was borked. I'm really not sure if I'm going to ask for a new Neo board or go for the Gigabyte one instead if I can't fix it.
Funny how I never had any trouble with Via boards before while nForce3 is a general bad experience for me

Neo Speech not working

I have just installed Adobe Captivate 8 on my PC (64 bit) I also have installed the Neo Speech program. I can see all the 'characters' in the folder so I know they have downloaded and installed on my PC. However when I go to convert text to speech it states that I have not downloaded Neo-speech and I only have 'Anna' has an option. Is there something else that I can do

Reset your preferences and (if required) reinstall NeoSpeech. Check out point no. 8 on Rod's blog post on how to reset here:
Basic Captivate Troubleshooting Techniques | Infosemantics Pty Ltd
Sreekanth

Neo speach not working in Captivate 4

I have both Captivate 4 and Captivate 5 installed on my computer. Even though I downloaded and installed the neospeach voices for Captivate 4, I can't get them to work. When I try to convert a slide note to speech by clicking the convert button in the slide notes area, I get a message that it needs to be downloaded (again). Can anyone help me with this?

Hi there
As I recall, the version 4 speech was cumbersome and not intuitive. You were forced to download and install. You thought you were finished at that point but in reality you simply made the true installer available. You then had to run the true installer to get the voices installed. Then you had to restart Captivate.
Apologies if you have already done all those steps. If so, perhaps there is a bug in there. If not, maybe the reminder helps?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

DD/DTS Fatality Platinum not working in console

Sound Card Model : SB0460 (Sound blaster x-fi fatalty platinum) hooked to a Sony Recei'ver STR-K9900P 6.
via optical cable. OS: Windows Vista x64.
I am not able to see the DD or DTS options in my console.
I am able to push windows media player to use DD and DTS after I went into the control panel and changed the audio options to the SPDIF out.
I am wondering why my console does not have the options for DD or DTS.

Still i cant use windows 7 because of this issue i would like to correct the administrator its not eax console its creative audio console and i used the default driver which is available on your site.
If i choose 2.1/4.1/5.1 mode i can hear in headphone too but if i switch to 7.1 no sound on headphone.
i love the feature that i can turn of my speaker controller and keep listening in headphone which i use in windows xp with out changing anything and if i need 7.1 just turn on the speaker volume controller.
I came back after months to see any solution still the audigy 2zs platinum rocks

E8400 Processor + P35 Neo Mainboard = Not Working.

PROBLEM:
Basically I have a MSI P35 Neo Mainboard and an E8400 3.0GhZ Core2Duo Processor.
I have the E0 model of the chip (SLB9J)
I have updated the BIOS to 1.8 (used the Flasher tool provided from this forum) as it is said to fix the compatability issues between the two components.
However, whenever I boot I get get stuck at a POST screen.. I think... not sure if its a POST screen but comes up every few times I power up the PC with the E8400 in it.
It says something like press Y to run BIOS settings or N for default settings.
I have tried both Y and N
Then it reads what's in the PC..
4096MB RAM
USB Keyboard....
and freezes.
However, I got this screen again when I reinstalled the Pentium D 820, and it recognised everything after I pressed Y (including USB components), and the PC booted up normally.
If anybody has had any similar problem and/or can offer any advice on what do do it would be much appreciated.
Apart from updating the BIOS version, I have also tried using a PS/2 keyboard instead of a USB.
PC Specs:
Processor: Intel Core™ 2 Duo E8400 3.0GHz, Socket LGA775, 6MB, 1333Mhz
Mainboard: MSI P35 NEO-FI, P35, Socket-775, DDR2, 1333FSB, ATX, GbLAN, Firewire, PCI-Ex16
Graphics Card: Gainward Radeon HD 4850 512MB GDDR3, PCI-Express 2.0, 2xDVI/HDMI/HDCP
RAM: DDR2: 4GB OCZ PC2-6400 Vista Performance Platinum Dual Channel kit
Power Supply: OCZ StealthXStream Powersupply ATX/EPS, 500W, 120mm Fan, 20/24pin
Harddrive: Samsung SpinPoint F1 750GB SATA2 32MB 7200RPM

Quote
I have updated the BIOS to 1.8 (used the Flasher tool) as it is said to fix the compatability issues between the two components.
BIOS v1.8 does not support the E0-Stepping 45nm processors yet. You need to upgrade your BIOS to the latest Version for your board version (v1.10 [.ten] a.k.a A7360IMS.1A0). I will upload it for you in this post.

SB0460 AC3/DTS decoder not working on Windows 7 (Driver 2.18.0015)

Hello everybody!
I hope somebody will be able to help me with my strange problem:
I just did the move from Windows XP (x64) to Windows 7 (x64) and discovered that the X-FI's AC3/DTS decoder is not working. All I get is either noise/static/crackling (AC3) or no sound at all (DTS). I have an X-FI XtremeMusic card (Serial: MSB0460535000206P) and the decoder is working absolutely fine on Win XP.
The latest driver version 2.8.005 is installed. I have also tried the first driver (2.8.003) that was supposed to have fixed the decoder under Windows 7. The changelog there says: Dolby? Digital and DTS? decode re-established for sound cards that included decoding in their Windows XP drivers. No such luck for me.
My sound card is definitely supported so I'm wondering why it's not working.
Use Built-in Decoder is selected in the Audio Control Panel I'm passing audio to S/PDIF (from e.g. PowerDVD or MPC-HC). On Win XP usually the on screen display pops up when the decoder detects the signal, nothing on Win 7.
(Note that I am NOT trying to input a signal from an external source.)
Gi'ven everything I have tried, logic tells me that there may still be a bug lurking in the decode driver.
Any ideas?

FI think you have to pay now for the decoder when using digital output but not sure what soundcards are limited.... otherwise try this drivers and see this help but i dont know if they will work...
http: //forums.creative.com/t5/Sound-Blaster/PAX-PCI-XFI-ALL-OS-Driver-V4-5/td-p/574643

Ac3 dts audio not working in my iphone but it works in my friends samsung mobile?pls help me.

Iam using o player... Ac3 dts audio not working msg showing

Settings > General > Reset > Reset Network Settings
Contact the carrier.

DTS (5.1) Audio Through Airport Express: Not Working

I imported some DTS-encoded WAV files into iTunes, to stream to my audio system via an Airport Express. The AE is connected to the preamp via optical, the WAV files were not converted or modified in any way, and the volume is @ 100% in iTunes.
The preamp receives the files and the DTS icon lights up, so all seems to be good... except the audio output is 2.0 only. As a test I converted the files to Apple Lossless (since I know the AE has to make that conversion), same result.
As another test I turned down the volume in iTunes and the audio became white noise, another indication that the files are DTS.
If I burn an audio CD using iTunes and the same WAV files, and play them on my OPPO player I get 5.1, the final and conclusive proof that the files are properly encoded.
I know I've read that streaming DTS-encoded audio via the Airport Express is possible, so I'm not sure what I might be doing wrong.
Any ideas?

Hi,
I experienced some DTS files in iTunes, with my AirPort Express some months ago, it was working fine on my Marantz receiver. A few days ago I wanted to listen to them again, only white noise... I wanted to rip by myself a DTS-CD, therefore I found this out. Apparently since AirTunes has been turned to AirPlay, it's not working anymore (?) / the same way.

[SOLVED] Front audio panel still not working on K9N Neo V3

I already posted on this here: https://forum-en.msi.com/index.php?topic=113813.0.
I still didn't get front audio panel to work on MSI K9N Neo V3.
Even with my new case; Sharkoon Revenge, it is not working. It wasn't working on my previous noname case too. However, front audio panel on my previous case was working on several other MBs except on this MSI K9N.
Now, I'm using the latest Realtek HD audio driver. I think it's from February '08. Just as with the driver dowloaded by Vista via Windows Update, anything plugged in front audio panel isn't recognized. In this new version of Realtek driver I can't find this Disable front audio panel option so I can't tell if it is checked or not.
Once more, there is not much to do wrong while connecting. Case front audio panel cabel is the same as on all other cases I've ever seen/had. It's a cable with the same number and position of pins as in all other cases. It fits fine on MSI K9N Neo V3. Rear audio panel is working fine.
Any solution to this!?

Quote from: Jack the Newbie on 07-April-08, 03:25:15
From what I can see from the Sharkoon product page, the front panel connectors of your case are not compliant with the Intel HD Audio Pin Standard.
Do you have a manual for your case that includes Pin/wire definitions for the front audio connectors?
No. There was no manual in package. I never thought I will need one either.
Here is Sharkoon Rebel Pin Assigment; http://img176.imageshack.us/img176/9729/pinslk2.jpg
Quote from: Jack the Newbie on 07-April-08, 03:25:15
Have you tried disabling automatic front panel jack detection in the Realtek HD Audio configuration utility? If you don't know were to find that option, access the tab labeled "Audio I/O" and click on the tool icon.
Yes, I tried disabling it. Two tabs (front audio out and front mic) appeared but none of it works.
Quote from: HenryW on 07-April-08, 03:35:46
From something I read: You can also physically check the audio cable of the front panel audio solution. If there is a cable connected to Pin 4, you have an HD Audio module; if there is no cable to Pin 4, you have an AC97 module.
I don't really understand this. Could you please check this on Pin Assignment scan I uploaded above!?

P965 Neo-F audio jacks not working.

I've been having serious issues with the audio jacks on the P965 Neo-F board. I have actually tried two boards, convinced the first board was defective since my speakers worked fine on other computers. On both the current board and the last board, I did a complete clean XP install, formatting my hard drives and installing the latest RealTek HD drivers (5.10.0.5404 dated 4/23/2007, from MSI). The first board never so much as peeped, while the board I have now has made some sounds, although I honestly don't know why. On this board, I had a set of Altic Lansing 2.1 speakers, but because the speakers would pop and make static noises every now and again, generally only if I bumped one of the small stereo speakers or wiggled the cords on the back of it, I thought perhaps the problem was the speakers being old.
On the current board, I tested a monitor that has speakers in it, and there was no sound. RealTek's sound manager, which I have installed, did not recognize that there was anything plugged into the jacks even though I had a line in, microphone, and line out plugged in. When it did recognize the lino out, it also recognized the microphone. However, it only recognized them for no more than a minute. The new speakers (also Altec Lansing 2.1) made one squeak for less than a second; other than that, there has been no sound at all.
I've tried several different RealTek HD drivers from MSI, Microsoft, and RealTek, but none have made any difference. I've enabled and disabled only to re-enable the audio device through BIOS with no success. I've checked the volume, DxDiag, and played music--Winamp and iTunes are both making sound, but no sound is coming out.
I'm pretty much out of ideas here. The only thing I can think to do is get a sound card, but I don't see why I should have to do that when I'm not an audiophile and the board jacks should suit me fine. I am quite at my wit's end with this, and would appreciate any help I can get.

Quote
It recognizes that I pluged something into the microphone jack but can't get the microne to work.
This problem usually has to do with the fact that the computer case used, or to be more precise: its front panel audio connectors are not fully Intel HD Audio compliant. Disable the Automatic Front Panel Jack Detection Function in the Realtek HD Audio Manager and retry.
If your mic still does not work as it should, browse through the Realtek Program Folder and look for an executeable file named "miccal.exe". Run it to calibrate your microphone. Also, enable "Microphone boost" in the Mixer-tab of the Realtek configuration program. The top half part of the mixer Tab ("Playback") can be scrolled to the left via <> buttons. Scroll left and localize the input jack your mic is plugged into (example: "Rear Pink In"). Click on the Options button and enable microphone boost.
Quote
When I go into the mixer settings I can't adjust adjust any of the inputs - cd, mic, line etc. Although it shows places for a sliding volume adjusters but doesn't show a slider to be able to adjust the volumes of the inputs.
That is totally normal and not a problem. It is basically a limitation of the Realtek HD Audio Driver in combination with Windows XP. It has nothing to do with the board. Here is an Asus-example:
There is nothing wrong here. If you scroll through that output devices/jacks in the Mixer tab of the Realtek HD Audio Manager, you will find that you can adjust the input/output volume for each audio jack individually. Doesn't make sense to adjust input volume in the output section? Well, ask Realtek which genius designed the interface and ask him personally.

Front panel audio jack is not working on K9N Neo V2

My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date. Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

Quote
Thanks. Its ironic that disabling it actually enables it.
It has to day with the front panel audio wiring of your case. How many wires are there that can be connected to the board's pin header?
Quote
Sound quality isn't very good
Can you be more descriptive? Is the quality better if you plug the headphone into one of the jack at the back panel? (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

Surrond effects (DTS/DD) not working

Hello!
I've got some problems getting DTS/DD effects working on my Logitech Z-5500 sound system (connected through SPDIF). My sound system have an lcd panel which shows current input, effect and so on. I've two samples with DTS and DD sound, but every time I play those sound effect defaults to stereo x2 or is completely silenced. Note that those samples works with DTS and DD effect out of the box on Windows 7 using vlc player so it's not an hardware issue. I haven't found any helpful solution on the wiki or internet yet so I'm begging you for any configuration tips! I'm using KDE with Pulseaudio, recently updated. Players that I've tested: vlc, mplayer, xbmc (so I don't think it is media player related) Thank you!

I have tested both with 6 and 2 channels (I suppose that I should choose 2 channels for the spdif output). The analog connection works fine with the 5.1 sound. I know that I can only get the stereo output through spdif, but my sound system is still capable of DD and DTS playback which is working correctly under Windows.
Well, I could use ALSA if it is possible to get multiple sound outputs at once (sound from flash content, media players, etc.) and application separate volume control. If it's possible to get it on ALSA and get the DD/DTS effects without any bigger struggle, I can give it a try!

K8T Neo FIS2R AMIBOOT.ROM not working

Hi
Had a game crash on my system, and froze everything, so had to restart manualy - now I get the error BIOS is not installed..
I have downloaded a copy of the bios (not latest) and changed the relevant ROM file to AMIBOOT.ROM and copied to a freshly formated floppy.
I inserted the disk, held down CTRL and HOME and started the computer...
After a while of running through the messages of BIOS not installed and no SATA installed (which is correct), the floppy drive light comes on, and then after a while (afet I have released the CTRL and HOME keys) I get a message saying "Remove disks or other media, Press any key to restart" then nothing, if I press any key - it says the same thing untill I remove the floppy... and then it restarts again.
I have tried to restart using the floppy and the CTRL and HOME keys about 20 times so far - always the same result - I have even tried diferent versions of the BIOS.
Any ideas?
I only have one stick of RAM (256Kb - 333) and two IDE HD's
Many thanks in advance
GreenBoy

Hans
My Set up is as follows (from the top of my head as I am doing this form work)
K8T Neo FIS2R.
AMD 3300 745pin chip set.
1 stick of 512Mb ram (non branded - baught from Watford Electronics)
2 x 200Gb Maxtor HD's
1 40GB Seagate HD
1 DVD RW
Power 500W
Dont know what else you need...
Anyway - last night I reset the CMOS in the way you described.
Still cant find the VIA settings in the Advanced Chipset or elsewhare - but I will. urned of SATA in Intergrated Peripherals...
Anyway - what then happens, is it says it cannot boot.
I tried using a Win98 SE boot disk - and all the drivers were listed as not possible to load or something...
Any way - deciding I did not have anotehr boot disk to hand - tried Symantec Ghost - still same result.
Finaly I tried WinXP Pro, and found that this installed all the bootup files no problem at all - what was then found was that my C: partition was missing - yup boot sector had completely disapeared.
Anyway knowing that I have recent full backups og my primary drives using Ghost, I took the plunge, created a partition in the unalocated space, reformated the drive, and reinstalled WinXP... all seems ok for now... except the message regarding no BIOS - but from what you say as soon as I fing the switch I will loose that again.
The strange thing is I never used to get this message before, and do not remember setting anything up for SATA - couldnt afford the disks at the time....
Thanks for the help Hans, you have been more than gwenerouse with your time , but can you please give me some more information? (Im a bit of a Nooby at playing with BIOS etc as they scare the crap out of me! )
1) Why is the detail of my system so important? I have made no Hardware changes for approx 6 months and everything was fine untill the game crashed, so therefore, dont see why this should affect things.
2) Why did the flashing of the BIOS not work? I was following the instructions carefully - but nothing.. therefore in my Nooby mind this means there is something else wrong, stopping the flashing from working.
Again - many thanks
GreenBoy

DTS Neo PC Not Working!

Similar Messages

Maybe you are looking for