DTW Error message

Dear All,
I got an error message when tried to update OITW table. Our customer need to update oitw.MinimalStock to be 0.
So I only have 2 columns in OITM table (recordkey and itemcode). 2 columns in OITW table (recordkey and MinimalStock)
When I update the data of non-default warehouse, it works fine.
But when I update the default warehouse data, I got an error message
Violation of Primary key constraint 'Oitw_primary'. Cannot insert duplicate key in object 'dbo.OITW'
Application-defined or object-defined error65171
Any idea? Thanks a lot.
Regards,
Yuka

Thanks for the reply. I have 3 columns in OITW. recordkey, WarehouseCode, and MinimalOrder
If the WarehouseCode is not the default warehouse, then I can update the data. If it is the default warehouse, I got the error message for all data.

Similar Messages

  • DTW error message - Data too large for the field65171

    Am trying to run up General Legder Accounts using DTW in Version 8.8 and have been successful with Level 2.  The customer has three levels only.  The total number of characters for the various segments is 18 and I have double and triple checked that the column "Code" has exactly 18 characters.  Even used "=trim" in Excel several times.
    When I run DTW for level 3 it errors out and it displays the above error message.  What is field 65171???
    I thought DTW was supposed to be so much improved with 8.8 - where are help files that tell you what the errors are???
    Regards - Zal

    Hi ZAL,
    I am facing this error too when exporting chart of account through DTW SAP 8.8 PL 19, although some of accounts are imported but in somme accounts saying the " data too large for the filed65171".
    Account code is of 7, as it reuires 9 Max,
    Please suggest me on this .
    Regards
    rps

  • Import budget by using DTW, error message "cannot find this object in B1 application defined, object defined error 65171

    Dear Sirs, I try to import budget header and budget line by using DTW, however error message found, "Cannot find this object in B1 application defined, object defined error 65171. Regards, Saw Hua

    Hi Javier,
    Please check below links.
    DTW Error 65171
    DTW error 65171
    DTW, Unkonwn error 1005!65171
    DTW error 65171 - Cannot find this object
    DTW error65171
    SAP B1 Data Transfer WorkBench : Data too large... | SCN
    Hope this help
    Regards::::
    Atul Chakraborty

  • Error message when upload PO (DTW)

    Dear All,
    when i upload PO using the DTW, error message prompt out, but i cannot find any mistake in the upload files for both header and items. i have 10 records to upload, then i upload it one by one, there is no problem.
    would like to know if anyone have idea of what is the meaning of the following error message? i have no idea about it and cannot search from the web.
    'Internal error [-2038] occurred' Application-defined or object-defined error65171
    Thank you very much!!

    All 65171 errors are related to field format mismatch.  If you could DTW one by one, you may have problem with RecordKey and LineNum mismatch.
    Thanks,
    Gordon

  • Error message in DTW when choosing any document business object

    Hi,
    We have an issue uploading AR Invoices, Credit Notes etc. with DTW.
    We have installed DI-APIs and DTW on a server, which does not have SBO installed. DI-API was installed by copying and running the installation files from a server with SBO 2005 (680320) installed. This is the same server that we are connecting to in DTW. DTW was also installed by copying the setup.exe file for SBO2005 SP01 from another place.
    All business objects work fine (Chart of Accounts, Business Partners, Items etc.) except for all document objects (Credit notes, Invoices etc.). The following error message is received:
    "Runtime error!
    C:\program files\SAP\Data Transfer Workbench\DTW.exe
    abnormal program termination"
    We also tried with another data migration program called xFusion Studio. But also here documents upload generates an error message:
    "An exception was thrown by target of an invocation"
    Do you know if this is due to a problem with the DI-APIs?
    Could the problem be related to the fact that SBO is not installed on the server? Anything else?
    Very thankful for help.
    Tobias.
    Edited by: External Consultant on Feb 8, 2008 12:04 AM

    If the issue was due to SBO not installed on Server then none of the templates should have worked. But you seem to have COA and BP working.
    How sure are you that your templates are fine.
    If possible could you comment here about the columns of your template that have data.
    Suda

  • DTW - oVatGroups error message

    Hi all,
    I'm trying to update the vat groups table through DTW. Many of the tax rates must be changed from 21% to 20% and doing it manually would take a lot of time.
    What happens is that i'm always getting an error message:
    "Can not find this object in B1Application-defined or object-defined error65171"
    Anyone can help me with this?
    Thanks.
    Regards,
    Pedro Santos

    Ok Gordon, here it is. The columns are RecordKey, AcquisitionReverse, Category, Correction, EU, Name and VatCorrection. This happens with all th fields.
    3;      D10;     N;          Input Tax;      N;          N;          Iva Dedutivel O.B.S. 20% M.Nac;                         R18;
    Thanks.
    Regards,
    Pedro Santos
    Edit: Sorry, just to put the commas to separate the columns.
    Edited by: Pedro Santos on Feb 9, 2010 5:28 PM

  • DTW Error A/R Credit Memos

    Hello guys!
    I got a problem while trying to upload A/R Credit Memos through Data Transfer Workbench. It shows an error message inthe DTW Error Log: "Cannot add invoice with zero total and deferred tax http://ORIN.DocTotalApplication-Defined or Object-Defined erroroCreditNotes".
    I am using the Document, Document_Lines and Batches files to upload and there is no record with zero in the lines nor the total
    I tried unselecting the deferred tax checkbox for all Business Partners and still doesnt work.
    Got any ideas what can it be or how can I solve the Problem?? I´d appreciate your help tremendously!!!

    Hi,
    Try to omit DocTotal on the header file. That is a calculated field. What is your B1 version and PL?
    Thanks,
    Gordon

  • DTW Error on A/R Credit Memos

    Hello guys!
    I got a problem while trying to upload A/R Credit Memos through Data Transfer Workbench. It shows an error message inthe DTW Error Log: "Cannot add invoice with zero total and deferred tax ORIN.DocTotalApplication-Defined  or Object-Defined erroroCreditNotes".
    I am using the Document, Document_Lines and Batches files to upload and there is no record with zero in the lines nor the total
    I tried unselecting the deferred tax checkbox for all Business Partners and still doesnt work.
    Got any ideas what can it be or how can I solve the Problem?? I´d appreciate your help tremendously!!!

    Thanks Rahul, the document_lines have the tax code and total alright, I believe probably it has to do with some tax configuration or something, but still I dont know which one may and if this is the real cause. What do you think??
    Gordon,
    thanks for letting me know, I will post it as a question.

  • Error message when vendor select in Purchase Order

    Dear Frnds,
    I uploaded Supplier master data in the sap b 1 system, when i select vendor from purchase order it sh
    owing error message  "no maching record found (CRD1) (ODBC-2028) (message 131-138)"
    thanks
    srikanth

    From this link https://websmp202.sap-ag.de/notes  you will reach the Notes Search Page where you will enter the Number in the click >>
    Try this first, incase you don't get there I have pasted the note below for you immediate reference.
    Summary
    Symptom
    Import or create Business Partner addresses via DTW or DI API
    Other terms
    Business Partners, Addresses, Bill To, Ship To, default
    Reason and Prerequisites
    Need for information
    Solution
    The correct way to use the BP header and addresses file in DTW is
    as follows:
    The BP header file in DTW should not be used for importing addresses.
    The Default Ship to and Default Bill to columns in the header file are
    only used for setting which address is default and not for importing
    new addresses.
    In these columns you use the address name given in the BPAddresses
    import file.
    Always use the Addresses file for importing BP addresses.
    EG: Create a BP called TestBP and give it 3 addresses in the addresses
    file 1 bill to (Bill1) and 2 ship to (Ship1 and Ship2),
    then using the header to set Ship2 as default.
    See my import files attached to this note.
    Creating Addresses via DI API:
    The BillToDefault and oBusinessPartner.ShipToDefault properties of the
    Business Partners Object:  Again these are only to be used to set the Default.  To create BP addresses use the BPaddresses Object.
    eg: oBP.Addresses.AddressName = "TestBP"

  • DTW: error "Duplicate bin locations have been removed - error id 1470000307"

    Hi,
    When attempting to import inventory data, using the DTW business object "Inventory Transfer" and using the templates "Transfer", "TransferLines", "StockTransferLinesBinAllocations",  "BatcheNumbers" and "SerialNumbers", the following error message appears:
    "Duplicate bin locations have been removed - error id 1470000307"
    Prior to attempting this import, I had successfully imported the Bin Locations and the Warehouse Sub Level Codes through DTW.
    This task relates to the replacement of the Inventory Pro Addon by the Bin Location functionality of SAP B1 version 9 PL10.
    Any advice would be greatly appreciated.
    Kind Regards,
    Erik

    Hi,
    Please refer SAP note, It may be related to your issue:
    1906789 - Unable to import bin location allocation information in
    stock transfers
    1964346 - DTW_Templates for Inventory Transfer with Bin Allocation
    do not exist
    Thanks & Regards,
    Nagarajan

  • DTW error The non-inventory item cannot be defined as by-product

    Hello all,
    I just used DTW to upload some BOMs. The majority of them went through fine, but I got the following error message on a number of items.
    The non-inventory item cannot be defined as by-product [OITT.pricelist][line:9], 'row no.9', Application-defined or object-defined erroroproductTrees.
    What does it mean?
    I have checked the relevant items, they all are not "non-stock" item, and their Item master data look fine.
    I was not trying to import anything relating to price or pricelist, so I don't think [OITT.pricelist] was actually relevant to the problem.
    I could add those items manually onto BOMs in SAP.
    Has anyone gotten this type of error before? Please could you share some of your experience ?
    Many thanks
    Yang

    Yang,
    This could happen if you are using comma delimited files and there are some commas left in any of the fields you want to import. This makes the column values slipped and could cause weird error messages like this.
    Open your file, highlight all and with CTRL+H replace all commas to nothing.
    Hope it helps.
    Regards,
    Nat

  • DTW Error file not  appearing

    Hi All,
       I am working with SAP B1205B patch level 41 and DTW version 2005.0.19. The DTW is running fine but when there is any error in importing the error details is not featuring in the log files. The log files is blank. after every run. What can be the reason. Please suggest.

    hi debraj,
    Go thru SAP Note
    Note 711538 - Cannot save map rule/Cannot see the error message after imp
    Summary
    Symptom
    1. During the import : cannot save the map rule after changing it
    2. After the import cannot  see the error messages and no log file has been
    created.
    Other terms
    Data Transfer workbench, DTW, log file, error message, map rules, SAP Business One,save
    Reason and Prerequisites
    Specific Solution
    Solution
    The read only box of the dtw.mdb file have to be unchecked.
    To do so, please perform the following :
    1. Go to your data transfer workbench folder, find the dtw.mdb.
    2. Right click on the file Select properties, uncheck the read only file.
    3. Press OK
    Header Data
    Release Status: Released for Customer
    Released on: 17.07.2008  14:15:32
    Priority: Recommendations/additional info
    Category: Installation information
    Primary Component: SBO-DTW Data Transfer Workbench
    Secondary Components: SBO-SH-DTW Data Transfer Workbench
    Affected Releases
    SBO-DTW 60 6.2 6.5  
    SBO-DTW 2004 2004 2004  
    SBO-DTW 2005 2005 2005  
    SBO-DTW 2007 2007 2007
    Hope problem will be solved.
    Jeyakanthan

  • Windows Vista: Ipod Error Message, no longer read by PCs

    Hello,
    I have a 5th generation black ipod video with 30GB of memory.
    The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
    Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
    I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
    What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
    Any advice would be greatly appreciated! Thanks!

    you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

  • Error message into a Variable.

    Dear users,
    I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
    My requirement is like this:
    I have a message class in which I want to define a text 'Employee number & not found'.
    I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
    So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
    lv_text = e0xx(messageclass) USING '1234'   which stores the text 'Employee number 1234 not found' in lv_text.
    How would I acheive it??
    Thanks, V!

    Try tis way
    message e999(00) with i_emp-empno into lv_text.
    press f1 in message will provide you more details
    a®

  • IPod seen by windows, not by iTunes+ weird error message

    I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
    and why is there no email adress from apple for service qustions? 10x

    I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
    Did you read the document i linked you to? here's another link to it:
    Putting iPod into Disk Mode
    whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
    ... never mind ... i guess you've fixed it anyway ...

Maybe you are looking for