DTW Error - Strange
Hi All,
I am trying to use DTW to import updated shipping dates on Sales Orders (this is unique per line). I created the two files (Headers and Lines), the import seems to work fine. However, on checking the results I can see that in fact it does not update the correct document, instead updating the next document on the list.
I will try to give some details about the files that I created, perhaps there is something wrong in them.
In the Headers files I have two columns, 1) RecordKey, which is the sequential number in the list to match the RecordKey field in the Lines file. 2) DocEntry, this is the specific document number which I want to update (the specific Sales Order).
In the Lines file I have three columns. 1) RecordKey, which corresponds to the RecordKey in the Headers file. 2) LineNum, which is the line number of the document (Sales Order). 3) Is the field which I am updating (it is a User Defined Field).
On both files I start the list from line 3. I have the header line, then a blank line (actually a copy of line 1), then the list starts.
I hope someone has some ideas on how to solve this issue. All the things I tried so far failed to change this strange outcome.
Many thanks,
Myran
>
Jeyakanthan A wrote:
> hi myran,
>
> I'll analyse template & let you know.
>
> Meanwhile as per Gordon reply check docentry of sales order
> as per query(Enter Document Number(Sales order number).
>
>
Select T0.DocEntry,T1.DocEntry From ORDR T0 INNER JOIN
> RDR1 T1 ON T0.DocEntry=T1.DocEntry
> Where T0.DocNum = '[%0]'
>
> Jeyakanthan
Hi Gordon & Jeyakanthan,
Many thanks for your help. I ran the query and I can see that the DocEntry is actually one off to the Sales Order number (DocNum). I never realized that DocEntry is different to DocNum.
I now tried to replace DocEntry with DocNum but it didn't work.
Best regards,
Myran
Similar Messages
-
DTW Error A/R Credit Memos
Hello guys!
I got a problem while trying to upload A/R Credit Memos through Data Transfer Workbench. It shows an error message inthe DTW Error Log: "Cannot add invoice with zero total and deferred tax http://ORIN.DocTotalApplication-Defined or Object-Defined erroroCreditNotes".
I am using the Document, Document_Lines and Batches files to upload and there is no record with zero in the lines nor the total
I tried unselecting the deferred tax checkbox for all Business Partners and still doesnt work.
Got any ideas what can it be or how can I solve the Problem?? I´d appreciate your help tremendously!!!Hi,
Try to omit DocTotal on the header file. That is a calculated field. What is your B1 version and PL?
Thanks,
Gordon -
DTW Error on A/R Credit Memos
Hello guys!
I got a problem while trying to upload A/R Credit Memos through Data Transfer Workbench. It shows an error message inthe DTW Error Log: "Cannot add invoice with zero total and deferred tax ORIN.DocTotalApplication-Defined or Object-Defined erroroCreditNotes".
I am using the Document, Document_Lines and Batches files to upload and there is no record with zero in the lines nor the total
I tried unselecting the deferred tax checkbox for all Business Partners and still doesnt work.
Got any ideas what can it be or how can I solve the Problem?? I´d appreciate your help tremendously!!!Thanks Rahul, the document_lines have the tax code and total alright, I believe probably it has to do with some tax configuration or something, but still I dont know which one may and if this is the real cause. What do you think??
Gordon,
thanks for letting me know, I will post it as a question. -
DTW error 10000100 Document total value must be zero or greater than zero
I am trying to import AR service invoices and I am getting an error.
I am using the Document and Document line files and I have tried several different ways but still get the same error.
On the main document file I have
DocNum,DocType,DocDate,DocDueDate,CardCode,NumAtCard,TaxDate,Doctotal
123 S (tried the ddocuemnt_Service) 20111130 20111130 1111 TEST 20111130 1.00
Document lines
ParentKey,LineNum,ItemDescription,TaxCode,FormatCode,Location,LineTotal
123 (blank) decription EX 418000 1 1.00
Now I have tried removing the total columns on 1 file, then alternating it...leaving it on both.
What am I missing here?
ThanksHi,
You may check this first: DTW Error when Importing A/R Quotation - document total value must be zero
Thanks,
Gordon -
Dear Sirs, I try to import budget header and budget line by using DTW, however error message found, "Cannot find this object in B1 application defined, object defined error 65171. Regards, Saw Hua
Hi Javier,
Please check below links.
DTW Error 65171
DTW error 65171
DTW, Unkonwn error 1005!65171
DTW error 65171 - Cannot find this object
DTW error65171
SAP B1 Data Transfer WorkBench : Data too large... | SCN
Hope this help
Regards::::
Atul Chakraborty -
I am editing footage from a Nikon D7000 in Premiere. I select all and replace with after effects composition. Aftere effects opens and gives this error message. I am on a windows based machine.
Thanks for you responses. This is a short sequence with about 20 clips. I have in the past used this workflow successfully on short sequences. I like to assemble in pp and then apply colour correction/colour grading, and some sharpening in after effects. This problem has occured since I went from AE 5.5 to AE creative cloud. It was my intention to contrast and colour correct each individual clip as needed, then using an adjustment layer over the entire sequence to apply a colour grading. As an enthusiastic beginner, If there is a better way to accomplish this Id love to hear it.
The following is my system/software info insofar as seems relevant.
AE version 13.0.2.3
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DADSNEWDESKTOP
System Manufacturer MSI
System Model MS-7693
System Type x64-based PC
Processor AMD FX(tm)-4130 Quad-Core Processor, 3800 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. V2.4, 29/03/2013
SMBIOS Version 2.7
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale Canada
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name DADSNEWDESKTOP\Owner
Time Zone Eastern Daylight Time
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 16.0 GB
Available Physical Memory 9.39 GB
Total Virtual Memory 31.9 GB
Available Virtual Memory 23.7 GB
Page File Space 16.0 GB
Page File C:\pagefile.sys
Video card:
Name NVIDIA GeForce GTX 550 Ti
PNP Device ID PCI\VEN_10DE&DEV_1244&SUBSYS_15563842&REV_A1\4&DE2C59F&0&0010
Adapter Type GeForce GTX 550 Ti, NVIDIA compatible
Adapter Description NVIDIA GeForce GTX 550 Ti
Adapter RAM 1.00 GB (1,073,741,824 bytes)
Installed Drivers nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version 9.18.13.4052
INF File oem76.inf (Section030 section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 1920 x 1080 x 60 hertz
Bits/Pixel 32
Memory Address 0xFC000000-0xFDFFFFFF
Memory Address 0xF0000000-0xF7FFFFFF
Memory Address 0xF8000000-0xFBFFFFFF
I/O Port 0x0000E000-0x0000E07F
IRQ Channel IRQ 24
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\nvlddmkm.sys (9.18.13.4052, 12.27 MB (12,866,008 bytes), 29/07/2014 7:50 PM)
The footage is: /D7000 H.264 MOV
Quicktime Player 7.7.5 (1680.95.13) is installed
error wording:
After Effects error: strange situation [0/-939524096]
( 26 ::139 ) -
DTW Error(Invalid Code OACT.AcctType ApplicationDefined
Hi all
I am shailesh ,I am trying to Import Chart of account inSAP B1 thru DTW
When i am specifying Acct type as at_Other it is importing the data properly but when it comes to revenues acct and the acct type that i have specified is at_Revenues,I am getting error as DTW Error(Invalid Code OACT.AcctType ApplicationDefined or Object defined error 65171)
I dont no why i am getting this error Bcoz in template also they have specified at_Revenues
The same error i am getting when i am using at_Expenses
Can anybody help me on this issue,I have tried with all possible combination like saving the file as txt,or csv but not able to solve the problem
I have also gone to SDK Help center and tried to check whether at_Revenues exists or not I gathered the following info on at_Revenues and at_Expenses
Member Description
at_Revenues Sets account as revenues account. 0
at_Expenses Sets account as expenses account 1
at_Other Set to accounts that are neither expenses nor revenues. 2
Plz help me .
shailesh m
[email protected]Shailesh,
There are two common issues that may cause this problem for you. This error can be caused if you remove columns from the template that you are using. The other has to do with multi-currency and dates. Please see these to SAP Notes on the SAP PartnerEdge Portal ...
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=0000914473
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=0000894035
HTH,
Eddy -
DTW Error 65171 "Cannot find this object in B1"
Hello experts
By trying to perform a massive modifying of Journal entries using DTW I am getting this error for all the lines of my source file. I am trying to modify cost center, so I am using the JDT1 template for the data load.
The thing is that by checking Step 5 "Map Object Fields", "Source Data" tab is displaying all the data as it is on the file, but on "Target Data" tab I can not find Journal entry number and LineNum, the rest f the data is ok, but those two fields are not being retrieved on "Target Data".
Thanks in advance and regardsHi Javier,
Please check below links.
DTW Error 65171
DTW error 65171
DTW, Unkonwn error 1005!65171
DTW error 65171 - Cannot find this object
DTW error65171
SAP B1 Data Transfer WorkBench : Data too large... | SCN
Hope this help
Regards::::
Atul Chakraborty -
DTW Error while importing A/R Invoice
Hi,
Iam using SAP B1 2005B Patch 38
When importing Item type A/R Invoices using DTW it shown
the following errpr message
customer record not found[INV1.ActDelDate][Line:1]Application-defined or object-defined error..."
In my Item master data i create the Item code as
HARCUT is a only sales item not a inventory item and
purchase item
Documents :
1.RecoreKey - 1
2.CardCode - C000001
3.HandWritten - tYES
4.DocNum - 10653
5.DocDate - 20081001
6.DocDueDate - 20081001
7.TaxDate - 20081001
8.SalesPersonCode - 2
9.Comments - Importing Through DTW
Documents Lines :
1.RecordKey - 1
2.temCode - HARCUT
3.CostingCode - NGM
4.LineTotal - 1149
5.Quantity - 1
6.TaxCode - Srv12.36
7.WarehouseCode - CH-NGM
Regards
P.Jambulingamhi jambulingam,
If you use manual number then defined
HandWritten - tYES in DTW otherwise make it as tNo.
If you use manual number then DocNum - 10653 is Ok,
but if you are using any numbering series remove it.
Jeyakanthan -
Mapping error : strange problem
Hi all,
I am getting the mapping error in runtime.
I have tested in message mapping. It is successful there.
But I got the strange thing. When I change from design to test page and upload my XML file(from SXMB_MONI), all nodes in my structure are red! Now If I test the message mapping , I am getting the mapping error in SXMB_MONI.
May someone has a idea what's going wrong...
Thanks & Regards,
Sekhar.Hi Sekhar,
If you test using an XML message saved from the sxmb_moni, you have to add 2 namespace tags around the content of the message. Something like this:
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
...message...
</ns0:Message1>
</ns0:Messages>
This is usually done internally by SAP XI, but in the test tool it is not..
Hope this helps!
(additional hint: First click "create instance" in the test tool. Check out the first two namespaces, usually messages and message1, and copy these in your test file. That should do the trick.:-) )
Regards,
Yordy
Message was edited by: Yordy Minderhoud -
SAP 8.81.
I imported the Business Partners. Now I want to import the BP Banks OCRB. When I run the DTW get error that the CardCode in the OCRB file is invalid. I try with just one record so I know that the CardCode is correct
Any suggestionshi,
you need to use the given template from C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\Business Partners\Business Partner Master Data\OCRB - BPBankAccounts.xlt, also do not delete any columns from it. just fill up the columns you need. this might be the cause of your error.
additional,
when uploading the OCRB - BPBankAccounts you should include the OCRD - BusinessPartners
regards,
Fidel -
DTW error when importing AR Invoices
Hello,
I'm using DTW to import AR invoices on SAP 2007, ana I'm getting the following error "Document Date deviates from the defined range", The periods are created correctly and the dates are within the range.
Do you have any idea of why this is happening???
Thank you very much for your help,
Patricia ParedesPatricia,
The Allow Future Posting Date is checked when you would create documents in your system with a future date.
It is not a general practice to check this.
Are the document dates in your template prior to current date?
Suda -
DTW error message - Data too large for the field65171
Am trying to run up General Legder Accounts using DTW in Version 8.8 and have been successful with Level 2. The customer has three levels only. The total number of characters for the various segments is 18 and I have double and triple checked that the column "Code" has exactly 18 characters. Even used "=trim" in Excel several times.
When I run DTW for level 3 it errors out and it displays the above error message. What is field 65171???
I thought DTW was supposed to be so much improved with 8.8 - where are help files that tell you what the errors are???
Regards - ZalHi ZAL,
I am facing this error too when exporting chart of account through DTW SAP 8.8 PL 19, although some of accounts are imported but in somme accounts saying the " data too large for the filed65171".
Account code is of 7, as it reuires 9 Max,
Please suggest me on this .
Regards
rps -
DTW error when connecting to my local Server
I am trying to use Data Transfer Workbench to upload data to a new company in my local server.. I am only able to connect with our centralized server and not with the local server in my system.. if i try to connect to my local server, it is showing the following error.
Based on the previous threads.....I have checked in the license manager, the server is correct only and the encryption key type is static.
I also tried changing the encryption key to dynamic, then when i login to sap.. it is showing as
when i give Yes... I get the following error.
I am not able to move forward... Kindly suggest any way to solve my issue..
All help will be greatly appreciated.
Thank YouHi San Xu
Thanks for trying this out..
The problem here was that.. the particular user did not have the license.. so changed to a user with license and now able to connect with DTW..
Thank You -
DTW error while uploading the GL account
Hi all
I m trying to upload GL accounts from dtw with segment account and I created segment in sap but dtw uploaded the title account but active account is not uploading and its giving error ...enter valid code . please help
Thanks \
rickyHi Ricky,
Please check below links.
Uploading of Chart of Accounts through DTW
Problem uploading COA with segment through DTW
Chart of account - DTW
May Heplfull
Regards::::
Atul Chakraborty
Maybe you are looking for
-
when I plug it into TV through CA75U the phone indicates that I plugged a headphones not A TV-Out cable and no video or audio on the TV appears PLEASE ! HELP
-
When I try to load the sitemap that Muse created into Google Analytics it comes up with this error | General HTTP error: 404 not found HTTP Error: 404 | Any ideas whats wrong?
-
Error Provisioning the Federated roles from CUP to enterprise portal
Hi Gurus, Need help. I am trying to provision the roles to enterprise portal using GRC CUP. I have created the connectors and field mapping and the connection is successful. We have a enterprise portal with producer consumer relation ship. The Enterp
-
NullPointerException in EntityEJBContext - WL 4.5.1
Hi people WL 4.5.1 SP 14 on Solaris. We are getting these two exceptions rather often: Wed Nov 21 13:07:18 CET 2001:<I> <EJB> Ignoring exception raised in ejbPassivate: java.lang.NullPointerException at weblogic.ejb.internal.EntityEJBContext.passivat
-
Issues with gtk3 (scrollbar won't scroll)
recently installed the flatstudio theme, and whenever i use the scrollbar it bounces back to the original position after i've scrolled, and if i hold it down it just goes backwards and forwards really fast...tried it with another theme (boje-blue) an