DTW error while posting initial quantities using stocktaking template
Hi All,
I am getting this below error while posting initial quantities using stocktaking template of DTW.
Can not find this object in B1Application-defined or object-defined error65171
I am using B1 8.8 PL10 version. Below is my sample txt file data
ItemCode WarehouseCode Counted
ItemCode WarehouseCode Counted
CHA0002 1 500
CHA0076 1 4000
Any help is appreciated.
Regards,
Noor Hussain
HI,
The error might be because of the cell format of warehouse code. Check if the warehouse code in the system is "1" or "01". If it is "01" u need to change the format of the cells to text or else just put the symbol ( ' ) before the warehouse codes. This might solve your problem.
Thanks and regards.
Pritesh.
Similar Messages
-
Error while posting initial quantities using stocktaking template of DTW
Hi All,
I am getting this below error while posting initial quantities using stocktaking template of DTW.
Can not find this object in B1Application-defined or object-defined error65171
I am using B1 8.8 PL10 version. Below is my sample txt file data
ItemCode WarehouseCode Counted
ItemCode WarehouseCode Counted
CHA0002 1 500
CHA0076 1 4000
Any help is appreciated.
Regards,
Noor HussainHi Gordon,
Thanks a lot for your time. I am able to post the quantities. Now please let me know how to update the item cost/price for these items using DTW ?
Regards,
Noor Hussain -
Error whil posting FI Document using 'F-28' 'Entry not Possible'
Hi ,
When i trying post FI Dcoument using 'F-28'. As sudden given Posting key and account number i m getting the error "Entry not possible'. Can someone tell what is the reason for this.
Regards
Balamurugan NCheck table TBSL : posting key TBSL-BSCHL give allowed account type TBSL-KOART
A-nlagen(Asset),
D-ebitoren(customer),
K-reditoren(vendor),
M-aterial,
S-achkonten (general ledger))
So, you cannot use a [posting key|http://help.sap.com/saphelp_46c/helpdata/en/96/8b3ee943ce11d189ee0000e81ddfac/frameset.htm] like 40 or 50 for a customer account or a 01 or 11 for a bank or expense/fee account.
Regards,
Raymond -
Error while posting a document using the BAPI_GOODSMVT_CREATE
Hi,
i was trying to post the Goods Receipt document ( Tcode MB1C) using the bapi BAPI_GOODSMVT_CREATE
i am passing the item details and Serial number details.
the error triggered was Maintain Serial Numbers for Total Quantity
but i am passing the quantity as 1 ( in item data) and passing one serial number.
is this error because of data problem or am i missing to pass the value to some dependent parameter..?
Please help me out.
Thanks in advance.
SriramHi David,
i was tring to pass the same.
in item table we have we have four item details ( below)
RES_ITEM - Item Number of Reservation/Dependent Requirement
ORDER_ITNO - Order Item Number
S_ORD_ITEM - Item Number in Sales Order ( length mismatch with serial item number)
PO_ITEM - Item Number of Purchasing Document ( length mismatch with serial item number)
out 4 , 2 are ruled out because of length mismatch. and in the reaming two are
RES_ITEM - Item Number of Reservation/Dependent Requirement
ORDER_ITNO - Order Item Number
this is a Goods receipt document, please let me know which field is required to map with item number in the above two.
Regards,
Sriram. -
Error while posting to Webservice using WCF-BasicHttp adapter
Hi,
I am getting the below exception when i am posting a request to a .asmx webservice using the Wcf-BasicHttp adapter.
I am able to call the same service with the SOAP adapter successfully. Could you please let me know any resolutions for the same.
The adapter failed to transmit message going to send port "MySendPort" with URL "http://myservice.com/Web.Services/service1.asmx". It will be retransmitted after the retry interval specified for this Send Port. Details:"System.ServiceModel.ProtocolException:
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes
of the response were: '
<html>
<head><link rel="alternate" type="text/xml" href="/Web.Services/Service1.asmx?disco" />
<style type="text/css">
BODY { color: #000000; background-color: white; font-family: Verdana; margin-left: 0px; margin-top: 0px; }
#content { margin-left: 30px; font-size: .70em; padding-bottom: 2em; }
A:link { color: #336699; font-weight: bold; text-decoration: underline; }
A:visited { color: #6699cc; font-weight: bold; text-decoration: underline; }
A:active { color: #336699; font-weight: bold; text-decoration: underline; }
A:hover { color: cc3300; font-weight: bold; text-decoration: underline; }
P { color: #000000; margin-top: 0px; margin-bottom: 12px; font-family: Verdana; }
pre { background-color: #e5e5cc; padding: 5px; font-family: Courier New; font-size: x-small; margin-top: -5px; border: 1px #f0f0e0 solid; }
td { color: #000000; font-family: Verdana; font-size: .7em; }
h2 { font-size: 1.5em; font-weight: bold; margin-top: 25px; margin-bottom: 10px; border-to'.
Server stack trace:
at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)".
Regards,
Ujjwal
-UjjwalWhere does the HTML indicate that the Service is not running??
The error message " The content type text/html; charset=utf-8 of the response message does not match
the content type of the binding (text/xml; charset=utf-8)" points to a bug in the WCF-BasicHttp described here:
http://social.msdn.microsoft.com/Forums/en-US/11796bf5-ba6a-4878-977e-5c854642f67c/the-content-type-textxml-charsetiso88591-of-the-response-message-does-not-match-the-content?forum=biztalkgeneral
Although not 100% the same, the conclusion here was to still use the old Adapter :-(
Morten la Cour -
Error while posting usint tcode f-02 in fi
Hi all,
I am getting an error while posting a document using t code f-02.It is allowing me to go through the 3 steps of posting a document but while saving it gives me the following error message:
Error accessing function module:fmfk_fikrs_read parameter:ip_fikrsp_fma_objnr
Message no:f1030
DIAGNOSIS:
The application has accessed a funds management or cash management module with parameters messing or defective.
PROCEDURE:
Notify your system administrator.
Hope some body would help me out.
ThanksHi,
Not sure if this works out
try checking img-Financial Accounting-Financial Accounting Global Settings-Company Code-Enter Global Parameters
double click on company code and see if any thing is assigned in the feild to FM.
regards
genie -
Posting period 011 2013 is not open while posting the document using F-02 getting the error
Hi SAP Captains,
Pls help me here.
While posting the document using T-code F-02 getting the error "Posting period 011 2013 is not open.
Please help me how to do, can you provide step by step.
Rgds..SureshHi Suresh,
You can search google and will get number of posts on this. This will lead to duplication of similar posts on forum.
The message says "FI posting period is closed for 11th period of 2013". In which period you are trying to post the transaction?
If it is past, open the FI posting periods in OB52.
BR, Srinivas Salpala -
"Submission status" error while posting comments using evcom
Hi friends,
I am getting "Submission status" error while posting comments using evcom. This error comes up even when we use "post comments" option in Action Pane.
The error text goes like this :
Error Message -
This cell can not be updated. Submission status must be modified to allow changes.
010_000|2009.TOTAL|INTERCO|NOPC
How can we get rid of this error?That's means the status for that specific category, time entity is approved and you can not do any changes including
comments chnages.
You have to change first the work status for that entity and after that you will be able to submit your comments.
Regards
Sorin radulescu -
Error while posting MIRO - PO is changed
Dear Guru's
I am getting an error message
PO is changed
Message no. ZFI_INWARD_REG026
while posting the invoice using Miro ..
I know this custom message But how to debug /clear this error message. I do checked in the OMRM - Error message is not maintained in that.
guide me to solve this..
Regards
AnandhHi
I have found the error message under Enhancement - Classic BADI (impl) - IF_EX_INVOICE_UPDATE~CHANGE_BEFORE_UPDATE method
IF wa_ti_mrmrseg-ebeln IS NOT INITIAL.
IF wa_ti_mrmrseg-ebeln NE wa_inward_reg_no-po_number.
MESSAGE e026(zfi_inward_reg).
ENDIF.
ENDIF.
--- How to find the reason for triggering this message and how to resolve this issue.
regards
anand -
Error while posting a write up for asset belonging to affiliated company
Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
PragyaHi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya -
Error while posting the parked document in ECC 6.0
Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks. -
Error while posting parked documents
HI ALL,
After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Please check it.
Thanks!Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu -
Error while posting 561 Document
Dear All
Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
Even OBYC setting for that valuation class already assigned.
please advice.
Regards
Kumar.Hello Anandhakumar ,
please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
it could solve your query.
regards,
Ninad Kshirsagar -
FA Retirement- 21151: error while posting asset document: '100000039'
Hello Experts,
I have a client who encountered this error during fixed asset retirement - scrapping.
After selecting the asset to be retired, sap did not assign an account in the account column, but the user
was able to save the document. After saving it, the user needs to retire again another asset - scrapping, but the document would not be saved because of this error: 21151: error while posting asset document '100000039'. The document number the systems is referring to is the last document saved but sap did not assign an account code.
Please help. My client is using sap b1 8.81 patch5.
Regards,
LuzHi Too Mui Hwee,
What we did is to put letters on the number so the series will continue example there is already 100333, 100334, 100335 since the error is encountered from 100333. We add 100333A, 100334A, 100335A.
Thanks -
Dear All.
I am getting the below error while posting a Goods Receipt / Goods issue, Kindly suggest what could be wrong ??
"You are not allowed to post manually in the substitute system
Message no. FDM_MIRROR301
I am trying to post the GR against a standard PO and trying to make GI against standard outbound delivery
Best Regards,
Santosh Kumar B VHi Santosh,
I believe you are using the FSCM - Collections module.
This clearly looks like a program error.
There are various SAP notes for the FDM_MIRROR errors. I have searched a few but could not make anything with number 301.
This to me looks like a new error and you may report the same to SAP for a note.
Thanks
Aravind
Maybe you are looking for
-
Envelope Printing Incorrectly to HP laserjet
When installing to one of the Mavericks upgrades last year, my old HP laser jet 3700n would no longer print envelopes correctly from either WordMac or from PrintShop3. I blamed the old age of the printer (More than 10 years) and no recent driver made
-
How to move referenced images to a new Hard Drive
All my Aperture referenced images (about 80.000) are stored at a 300gb firewire HD. That's not enough and I plan to move all my photos to a new HD, 1Tb probably. I understand that I can't move the images directly from one drive to another. So what's
-
Regarding inserting a field or text in template cell
Hi Experts, Please let me know how to insert a field or text in the Cell in template. I created template C1 1 14 20.00 MM 8.00 CM 4.00 CM 4.00 CM CM i have 14 lines and 3 colum
-
Late 2013 15" Macbook Pro - iCloud Apps become non-functional
Hi Everyone, My new top of the range Macbook Pro has some issues... Here's the specs: 2.6GHz Quad-core Intel Core i7 16GB 1600MHz DDR3L SDRAM 1TB Flash Storage Arrived on Tuesday last week. Obviously very excited etc... Noticed after 30 minutes that
-
Jsp data display as a result of a button click
i have a textfield in a jsp along with a SEARCH button. the search button searches the database for the existence of the value entered in the textfield. how should i code so that at the click of search button the dbase is searched (for the entered va