DTW error while uploading UDO master
Dear All,
When am trying to upload a UDO master through DTW, it is giving me an Unknown error 1005! 65171.wat could be the reason for it.
Regards,
Shyam sundar.A
Dear Shyam,
All 65171 errors are related to data format mismatch. You need to try by only few columns first and add one column at a time to test.
Thanks,
Gordon
Similar Messages
-
Error While Uploading GL Master Data in LSMW
Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI ConsultantHi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh -
Error while uploading HR master data from inQuality server
Hi, Expert. While uploading of MAster data from Developement to Quality by BDC. When program starts for Tcode PA40, selecting Hiring Action, it is goining to the Action Screen. Here while taking the position from HR template, it gives error as Position is not in Table T428B. Payroll area on the date (Date of original hiring, of the person) it is taking DM as defalt in place of our created Area and terminating. When i am trying entering the data manually, it is giving same error for Position. I am not able to upload the data. Kindly help me by suggesting me the correct sequence and steps for uploading the data. Correct answer will be provided with STARSSSSSS **. Regds Punit.
Have all your configurations been transported to Quality?
Have you created the positions before initiating BDC for Hiring?
Check Feature ABKRS in Quality. Is this same as in Development?
Is your BDC running OK in Development?
Regards, -
Getting error while uploading gl master data using LSMW batch input data
Hi Experts,
I am getting error while uploading the GL master data through lsmw using batch input recording.
After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.Hello,
Kindly post in the FI forum to get a better response.
Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
Kind Regards // Shaubhik -
Error While Uploading Material Master Through Bdc Call Transaction
Hi Sap Gurus,
I am doing Bdc call Transaction for Material Master Uploading.
But After Entering data for 4-5 screen i got a error_
Field Mara-iprkz doesn,t exit in the screen saplmgmm 4000
Field Mara-prctr doesn,t exit in the screen saplmgmm 4000
Field Mbew-stprs doesn,t exit in the screen saplmgmm 4000
Field Marc-mtvfe doesn,t exit in the screen saplmgmm 4000
Enter Valuation class.
This is my Programme....................................
<removed by moderator>
Thanks in advance.
Arindam
Moderator message: please post only relevant code parts, your post must be less than 5000 characters to preserve formatting.
Edited by: Thomas Zloch on Apr 16, 2011 9:29 PMSorry for my obvious answer, but you should ask a more precise question.
Your errors are that you try to enter fields but they don't exist, so it sounds logic.
And the error "Enter Valuation class." means that the field is mandatory. So you must enter it.
Re-record the transaction using SHDB (eventually play with the http://wiki.sdn.sap.com/wiki/display/ABAP/Recordduringplay), run it in A display mode, and correct your program.
Sandra
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MVKE-SKTOF'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MARC-PRCTR'
wa_mara-prctr."'MUMBAI'.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MARA-IPRKZ'
'D'. -
DTW error while uploading the GL account
Hi all
I m trying to upload GL accounts from dtw with segment account and I created segment in sap but dtw uploaded the title account but active account is not uploading and its giving error ...enter valid code . please help
Thanks \
rickyHi Ricky,
Please check below links.
Uploading of Chart of Accounts through DTW
Problem uploading COA with segment through DTW
Chart of account - DTW
May Heplfull
Regards::::
Atul Chakraborty -
Error while uploading Product master with LSMW Idoc method using XIF
Hi Madhura,
Please check it out the length of material field and maintain the guid for the product , check it out the atatus maintained to maintain the product i.e insert(I) or Update(U).
Regards,
Naveen
Edited by: Naveen Kumar on Jul 7, 2009 4:35 PMHello,
I could identify the error. It was due to incorrect UOM. Problem resolved.
Thanks,
Madhura -
Error while uploading schema for Master Catalog
Guys,
I got the below error while uploading Schema with custom char for Master catalog;
"Error in row 11 of the CSV file" where as the 11th row is "DataType;INTEGER;integer;Integer Type"
in the csv file. Please suggest.
Regards
TGBHi,
Check txn-SLG1 in SRM system. There if you go to details, you will see exact description of error.
There are some dos and donts for csv files. for e.g you can't put : , / etc.symbols in the csv file.
Regards,
Sanjeev -
Error while uploading Template
Error while uploading Template in Internet Procurement Catalog Administrator responsibility
I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
This is how header level is in the template and line level has item information.
#ENCODING Cp1252
Language Section* EN-US
Catalog Section Supplier* Title
FEDERAL INDUSTRIES Test Catalog
***********When i looked into log file i see error message ********************
[5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
[5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
[5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <INFO> Job failed
[5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
I already had language section in the template as shown above, not sure why it is giving error.
could you please let me know how to troubleshoot
Edited by: 855902 on May 20, 2011 5:02 PMHi,
We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
You can refer below URL:
http://appswork.blogspot.com/2009/09/catalog-loader.html
/S.P DASH -
Error while uploading BITMAP image in SAP through SE78.
Hello all,
I am getting below error while uploading image into SAP through SE78.
'Bitmap file: No color table available (True Color, Bitcount 32)'.
I have tried searching for solution and got some help from below reply from a thread:
You may do these options:
1. Lower the resolution of the image
2. Lower the file size of the image
Regards,
Reymar
I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
Thanks in Advance.
- Jayant Sahu.Hi Daniel,
First of all, if you dont mind, start a new thread for your question please.
Anyways, answer to your question is --
You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
This way, your problem would be resolved.
Thanks.
Kumar Saurav. -
Hi Guys,
I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
Maximum Size set in Our SYSTEM is :9765MB.
Approx size of the Document tried is more then 300MB.
Appreciate your help on this.
Regards
TarunHi Tarun,
Please check the below system properties using system user login
attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
attachments.upload.enable.buyers- " Enable/Disable uploading of attachments by internal users"
Also Please check with other attachment, contracts related properties in the System.
Let me know if this helps.
Thanks,
Raj. -
Error while uploading Transport request
Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the trasnport request from one sap system which have a set of developments
for example downloaded files are;
control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location /usr/sap/transpad/data/
we tried tro add in the import queues using TCODE: STMS
and trying to import.
During import we get
error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
End with rc : 16
Please help me with the problem.
Thanks in advance
DeepakHi,
Check the versions of the two sap systems you are downloading and uploading the transport requests -
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
AbhijitHi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait -
Getting error while uploading a document in a library
Hi,
I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
It reads:
The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
How to resolve this ? I have referred many articles on this one, but none helped.
Thanks for your response in advance.
RegardsHi Prajk,
Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
If above cannot work, please check ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Error while uploading text file....
Halo Friends,
I am uploading 4 text files which contain three columns separated by a tab, but when i am trying to upload those files using WS_UPLOAD Function Module i am getting a runtime error saying 'error while uploading/downloading'.
Please solve this problem as soon as possible.
Thanks in Advance,
ramaHalo again,
Now that i am able to upload the files, i need to update the database table the update statement is executing correctly but when i debug i see that the sy-subrc value is 4 but not 0.
and hence the it is not committed.
Any suggestions. i am pasting my code here for your reference:
Tables: qmfe.
data: begin of gt1_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr20 like qmfe-/itml/usr20,
end of gt1_qmfe.
data: begin of gt2_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr21 like qmfe-/itml/usr21,
end of gt2_qmfe.
data: begin of gt3_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr19 like qmfe-/itml/usr19,
end of gt3_qmfe.
data: begin of gt4_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr07 like qmfe-/itml/usr07,
end of gt4_qmfe.
data: gs1_qmfe like line of gt1_qmfe,
gs2_qmfe like line of gt2_qmfe,
gs3_qmfe like line of gt3_qmfe,
gs4_qmfe like line of gt4_qmfe.
data: ls_lines1 type i,
ls_lines2 type i,
ls_lines3 type i,
ls_lines4 type i.
parameters: ip_file1 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\StoDt.txt' obligatory,
ip_file2 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,
ip_file3 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,
ip_file4 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\AWB.txt' obligatory.
field-symbols: <fs1> like gs1_qmfe,
<fs2> like gs2_qmfe,
<fs3> like gs3_qmfe,
<fs4> like gs4_qmfe.
perform upload_gt1_qmfe.
perform upload_gt2_qmfe.
perform upload_gt3_qmfe.
perform upload_gt4_qmfe.
perform update_qmfe.
*& Form upload_gt1_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt1_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file1
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt1_qmfe.
describe table gt1_qmfe lines ls_lines1.
write: / ls_lines1.
ENDFORM. " upload_gt1_qmfe
*& Form upload_gt2_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt2_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file2
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt2_qmfe.
describe table gt2_qmfe lines ls_lines2.
write: / ls_lines2.
ENDFORM. " upload_gt2_qmfe
*& Form upload_gt3_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt3_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file3
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt3_qmfe.
describe table gt3_qmfe lines ls_lines3.
write: / ls_lines3.
ENDFORM. " upload_gt3_qmfe
*& Form upload_gt4_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt4_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file4
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt4_qmfe.
describe table gt4_qmfe lines ls_lines4.
write: / ls_lines4.
ENDFORM. " upload_gt4_qmfe
*& Form update_qmfe
text
--> p1 text
<-- p2 text
FORM update_qmfe .
data ls_cnt type i.
loop at gt1_qmfe assigning <fs1>.
update qmfe set /itml/usr20 = <fs1>-/itml/usr20
where qmnum = <fs1>-qmnum
and fenum = <fs1>-fenum.
if sy-subrc = 0.
commit work.
add 1 to ls_cnt.
endif.
endloop.
write: / ls_cnt.
ENDFORM. " update_qmfe
Maybe you are looking for
-
Error while loading shared libraries: libdb.so.3
Hi, While running adconfig, I am getting below error: /iAS/Apache/perl/bin/perl: error while loading shared libraries: libdb.so.3: cannot open shared object file: No such file or directory. It is new cloned environment of 11.5.10.2 with 11g db on lin
-
TS1474 iTunes/USB sync problem with iPhone 5
Syncing my iPhone 5 to iTunes via USB has gotten very, very slow in the last few days and since yesterday my calendar hangs and does not sync. Possible solutions?
-
Why does spotlight not show up in time machine
So I recently upgraded to os x lion and i have time machine backing up everything for me. my main problem is while in time machine, all i get is a basic window with all my folders. there is no spotlight so it is hard to search for lost things quickly
-
CC updater crashed at the final step of upgrading acrobat to DC - right at the success please restart screen. All the usb peripherals died & I had to manually power off to get anything back. Now when I restart windows fails to boot & goes into the re
-
Network requirements for SQL Server Replication
Hi, Can any one tell me what is network requirements for SQL Server replication. I have successfully configured the replication on LAN with active directory but I am unable to configure it on WAN. Can anyone tell me how WAN can be configured for sql