DTW HELP FILE IS NOT FOUND

I HAVE UPGRADED THE DTW PACKAGE.
BUT STILL I AM UNABLE TO SEE THE DTW HELP FILE.
WHAT MAY BE THE CAUSE.

Check help file in path
"C:\Program Files\SAP\Data Transfer Workbench\Help_DTW_EN.chm"
Jeyakanthan

Similar Messages

  • Photoshop CS6 updated Raw and now get message saying "Could no complete your request the file was not found." Help

    I updated CS6 Camera Raw as it would not read my D7100 raw files. Since that I cannot open jpegs.
    Also, I go to Photoshop - About Plug-In - Camera Raw and get a pop up window saying "Could not complete the Camera Raw command because the file was not found."

    I apologize, guess I wasn't very good in giving info. It is on a Mac running Snow Leopard. I did the CS6 updates through Help/Updates but that did not update to where my camera (Nikon D7100) raw files could be read. I searched around on Adobe's site for the Camera Raw update that took care of reading them, forget what page I finally found a download link on but the update was a singular installer for Camera Raw. Once updated Photoshop CS6 stopped being able to 'find files' even when the file is dragged onto the Photoshop icon, or through the menu's Open. I have since uninstalled everything reinstalled the suite from the original installer. I know have a Photoshop that will open jpegs but just not my camera's raw files. Thanks for any help that you think might take care of the problem. I am not going to update the Camera Raw unless I can find out what happened and what to do to prevent it. I switched my camera to take jpegs until if and when I solve the mystery. :-) Thanks!

  • Getting authorization error message: Required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

    I have recently purchased this MacBook used and am trying to authorize it on the iTunes Store but even after uninstalling iTunes and re-installing it with a fresh copy I'm getting this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed."  And I have no idea of where or how to fix this issue.  Any help or suggestions will be greatly appreciated.  I even tried to deauthorize this computer and got the same error message.  HELP!

    I used Terminal to change the permissions on the folder in question.  I followed the instructions in this article:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one.   I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable.  So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal.  Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal).  I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.)  And it fixed the problem right away.
    What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do.  It didn't mention Terminal.  What would really be helpful is if Apple included a link to a page like this in their error message.

  • I can't sync my macbook air with my ipad, problems with authorization... this keeps cropping up: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permi"

    Help, cannot sync completely with my ipad, and i also cannot remove or delete shared photos which are clogging up my ipad 64GB memory! Some issue with this keeps croppin gup, so frustrating:
    "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed."
    Not sure how we can correct his permissions problem, and whether authorising or deautorizing makes any difference, with more and more errors keep popping up, this got to be such after an update of the OS, can remember which!?
    HELP!!!

    follow this:
    Launch iTunes
    select iTunes Store from the menu on the left side.
    sign in via the link on the top right area if you haven't done so already
    click the link where you Apple ID email appears, enter your Apple ID password, click View Account, this will take you to a page displaying detailed information about your Apple ID account.
    The last item under Apple ID summary should be Computer Authorisations, click Deauthorize All
    now reauthorize any computers as needed when the system prompts you.
    good luck.

  • TS1459 The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

    please help me how to authorize my computer as it always say The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

    Many thanks. If you're on Mac OS, let's try the following document:
    iTunes: Missing folder or incorrect permissions may prevent authorization

  • HT1848 I cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please hel

    cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please help me

    Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
    iTunes: Missing folder or incorrect permissions may prevent authorization

  • Files are not found in iTunes

    Everything seemed fine, but after I added some new files to iTunes, the files were not found in the iTunes. What's going on??? It shows that the songs is being loaded into iTunes, but there's actually no file!!!

    hey!
    i just fixed this problem on my itunes today..i was about to go insane because i am so not computer literate.
    what i did was:
    -go to your start menu.
    -click search (the magnifying glass icon).
    -under pics,music,or video, search for one of the songs that
    is showing "file not found",exclamation pt.
    -when you find what file it is under,see if more of the
    songs are in this file,too.
    i got lucky,i found all of my music hiding in that file.
    AND they were all in mp3 form,with the itunes symbol
    (the green music icon)next to each of the songs.
    the not-so-fun part was,i had to double click on each song (about 1000 songs,but i was willing to do anything after all the bs!).
    this copied them to my itunes,and put a copied version next to the one with an exclamation pt.
    i hope this helps!
    good luck!

  • Updated to itunes 10.5 and Help files are not accessible

    I have updated my itunes to 10.5 today but now the Help files are not accessible.  I receive the following message - the request URL/itunes/win/10.5was not found on this server - Apache/2.2.3 (Oracle) Server at help.apple.com Port 80.

    I have seen this before. You need to update the apps in your app store, and once they are updated, they will work again.

  • The ipod "ipod touch" cannot be synched the required file is not found

    When i try to sync my ipod touch it goes through the motions but when it tries to sync photo's i get the message about saying that the ipod can't be synched as the required file is not found.  Earlier today a driver was automatically put on my windows 7 based laptop and it seemed to be from apple and was downloaded just as i plugged in my ipod touch ...... can anyone help please ?
    I have an iphone and ipad2 and have synched them  both today without any problems .

    Deleting the iPod Photo Cache folder usually resolves the problem ofr its location see:
    iTunes: Photo sync creates iPod Photo Cache folder
    You may have more than one folder and you need to delete all of them.

  • NQS Error: 47077 NQS Config .ini file was not found

    Hi All,
    I just installed OBIEE 11.1.1.7 on my windows 64 bit. And trying to install OBIA 7.9.6.4 on the top of this . While installing I am getting an error :
    NQS Error : 47077 NQS Config.ini file was not found. Make sure your environment is set up properly.
    Pleasw help me out guys.. I am new to this OBIA installation.

    its a BUG
    see this Installing BI Applications 7.9.6.4 on BI EE 11.1.1.7.0 (Doc ID 1561846.1)
    Please down the attached file Technote1561846.1_InstallSecurity.zip and apply the solution.

  • Help Set IdeHelp not found - JavaHelp 2.0 (RC2)

    Hi all,
    I was trying to run IdeDemo with the following command (in the JH_HOME/demos/bin directory):
    java -jar ideDemo.jarI got the "Help Set IdeHelp not found" message. I understand that the help set file is in the hsjar/idehelp.jar. Do I have do unjar it so that the ideDemo can pick it up? Thanks in advance.
    Prudence

    How to use IDEDemo.jar ?
    1. unjar the .jar file hsjar/idehelp.jar.
    2. run command "java -jar hsviewer.jar" in the JH_HOME/demos/bin directory.
    3. select idehelp.hs file from the hsviewer dialog.
    4. click "OK" button to preview IDEDemo.
    If you are a JavaHelp newer, I suggest that you see the following demo first.
    It is very good and simple.
    http://www.pivotonic.com/jawahelpauthor/HelloJavaHelp.zip

  • Sun One Directory Proxy unable to start error DPS.pid file was not found

    We finally able to install Sun One Directory Proxy 5.2 , but we are unable to start the Proxy server, we are getting error "Since the DPS.pid file was not found, DPS-server is assumed down
    Anybody has any clue / ideas that we would very help fulll?
    Thank

    I've been struggling with this and another problem with DPS for a couple of weeks.
    It generally starts up fine when you dont have SSL enabled. The moment you enable SSL, a couple of things go for a toss:
    1. The problem mentioned above surfaces. Are you facing this problem even without SSL?
    2. If you log into the Administration console, and try to make changes to the DPS configuration, it will give an error stating that "Error in writing to Configuration Directory". But apparently, it will manage to save things. Just that when you try to start it with SSL enabled, it won't. Neither from the command line, nor the GUI.
    Anyone managed to fix this? Sun informed us that there is a problem with Jars, but thats about it.

  • Import iTunes Media Library, some files were not found problem

    Hi guys,
    I am trying to restore my music library info via importing from iTunes Media Library xml file I backed up. During import, iTunes gave me error message box saying that some files were not found and therefore won't get imported. After it's done, I checked the iTune and I noticed many of the music files did not get imported at all, even their locations are correct. Is it because iTunes stopped importing at the first entry that it found its location not existed and therefore skipped the rest all along? Even later ones might be valid. Is this the case?
    Is there an easy way to find out what those entries are? So perhaps I could go and edit them directly in the xml file. The message box did not give much information
    Any help would be really appreciated,
    Thanks alot
    Windows XP Pro
      Windows XP Pro  

    Hi Chris
    I have now experimented a little more and discovered that although Time Capsule (TC) is showing in Finder as a Shared Drive at laptop startup (and showing a status of a connected user, me) it is not actually 'mounted' in the true sense of the word i.e. the unmount/eject symbol is not showing next to it nor either of the drives connected to the TC. By clicking on either of the 2 drives (i.e. the TC 'Data' disk or the TC USB-connected drive) the status changes to show the dismount symbol on both the selected drive and the TC in the Finder side bar. Launching iTunes after this intervention works every time as per your advice. Not the Apple 'it just works' that I have come to expect and appreciate but at least I now understand how to make it work reliably..........many thanks and I hope Apple just makes it work sometine in the future

  • How do I fix Camera Raw in CS6? I get "Could not complete request because the file was not found"

    How do I fix my Camera Raw in Photoshop CS6? I tried to view an NEF file in CS6, but it said I had to update my Camera Raw to 7.3 (I had 7.0). I went online and the only thing I could find was to download 8.6 so I started with that, and installed something and it didn't work, and then it told me I couldn't download 8.6 because my OS X is not 10.7 ( I have 10.6.8). Now when I go back into photoshop it gives me this error "Could not complete request because the file was not found" and I cant open any jpegs in photoshop.  I have tried shutting down my computer, deleting caches, and uninstalling photoshop and reinstalling it. Still no luck. Any idea how I can fix this?

    Follow these instructions to manually update your ACR plug-in to ACR 8.3, which was the last version compatible with your OS:
    http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

  • File path not found

    hi
    i am using
    parameters:p_file like rlgrap-filename,
    to read the path for the file,
    if the file is not found.
    it should mention enter correct file path.
    how do i handle this scenario.

    You can check the SY-SUBRC returned form the UPLOAD FM.
    Like:
      DATA: L_FILE TYPE STRING.
      L_FILE = P_LFILE.
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
        EXPORTING
          FILENAME            = L_FILE
          HAS_FIELD_SEPARATOR = 'X'
        CHANGING
          DATA_TAB            = IT_FILE
        EXCEPTIONS
          FILE_OPEN_ERROR     = 1
          FILE_READ_ERROR     = 2
          OTHERS              = 18.
      if sy-subrc <> 0.       "<<
        message e398(00) with 'Error while opening a file'.
      endif.
    You can add the File Selection Pop up for the file on the presentation server.
    Like:
    PARAMETERS:       P_LFILE TYPE CHAR70 OBLIGATORY.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LFILE.
      PERFORM F4_LOCAL_FILE.
    FORM F4_LOCAL_FILE .
      DATA: LT_FILES TYPE FILETABLE,
            LW_FILES TYPE FILE_TABLE,
            RC       TYPE SY-SUBRC,
            L_TYPE   TYPE STRING.
      L_TYPE = '*.txt'.
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
        EXPORTING
          WINDOW_TITLE            = 'Raw data for RFBIBL00'
          DEFAULT_FILENAME        = L_TYPE
        CHANGING
          FILE_TABLE              = LT_FILES
          RC                      = RC
        EXCEPTIONS
          FILE_OPEN_DIALOG_FAILED = 1
          CNTL_ERROR              = 2
          ERROR_NO_GUI            = 3
          OTHERS                  = 4.
      IF SY-SUBRC <> 0.
        MESSAGE E398(00) WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    * Get file selected
      READ TABLE LT_FILES INDEX 1 INTO LW_FILES.
      MOVE LW_FILES-FILENAME TO P_LFILE.
    ENDFORM.                    " F4_local_file
    Regards,
    Naimesh Patel

Maybe you are looking for