Dual 24" LED displays - how can I set up audio for "real stereo"?

Have two 24" LED displays connected to my MacPro. Can I adjust them in a way that the right stereo channel only comes from the right speaker of the right display (left speaker muted) and the left channel only from the left speaker of the left display (right speaker muted)?
Didn't find any such option in the Audio-MIDI setup or in the Sound control panel...
Thanks for your ideas!

It can be done with Audio Hijack Pro
<http://www.rogueamoeba.com/audiohijackpro/>
Hijack the audio application in the "Input" tab (or all system sound) and press the mute button. In the "Effects" tab, put a Channel Tweaker effect followed by an Auxiliary Device Output effect in the top row, and also in the second row. Set the top Channel Tweaker to "Kill Right" and its Auxiliary Device out to the left display's speakers. Set the lower ones to "Kill Left" and the right display's speakers.

Similar Messages

How can I set a password for firefox so that everyone have to enter the password before executing firefox

My younger sister executed my firefox just at this afternoon(she originally use IE), and she saw something that can't be seen. How can I set a password for firefox so that everyone have to enter the password before executing firefox?

Also see this for an English version of Profile Password:
*Profile Password: http://nic-nac-project.de/~kaosmos/profilepassword-en.html#PPF
It is an extension to protect the profile with a password, but being an extension that protection can easily be bypassed by starting Firefox in [[Safe mode]].<br />
So do not rely on it.<br />
If you want to protect content then you have to use methods supported by the OS like a separate user account with a password or an encrypted file system.

How can i set a layout for MIGO screen

Hello all,
How can i set a layout for MIGO screen. & make that layout default. Like i want to drag Requistioner column next to quantity in MIgo screen. temporarily I can drag but is there a way to save as layout & save it.

Hi
First you arrange however you want and then go to table settings which is there in the right corner of the item details and create a variant and save.
Find a button with blue yellow and white at the top end above the vertical drag bar when put the cursor it will show you as Configuration.
After creating the variant tick the check box use as standard setting below the variant
Hope it helps
Edited by: Girish Adaviswamy on Mar 3, 2010 1:27 PM

How can I set a default for webpages to expand to full screen?

How can I set a default for webpages to expand to full screen? Every webpage I go to does not expand to a full screen which causes me to have to ctrl+++ each time. How can I set my preference to expand to full screen automatically?
Thanks.

The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

How can I set a password for my pictures on iPad Air ?

How can I set a password for my pictures on iPad Air ? if anyone have my iPad access mail or something I don't want anyone access my photos so how can I set it up.

You can't set a password for the Photos nor Mail apps, you can only set a passcode for your iPad as a whole (via Settings > Passcode).
There are third-party photo management apps such as Photo Manager Pro which you can copy your photos into from the Photos app (and then delete them from Photos), that app allows you (via its settings within the app) to set a password to access it.
For email you could access your email via a browser (and not have your password stored in the browser), or see if there are any email apps in your country's app store which have a password option

How can i set a path for my deployment files in weblogic server 10.3

Hi
How can i set the path for my WAR ,JAR files while deploying.i am using the wls10.3 version.
is there any scripts for this ,please provide me.
my Application is ADF 11g application.

By "path", I assume you mean "classpath".
The simplest way is simply to include the jars you need inside the web application or web module's WEB-INF/lib directory, EJB module's META-INF/lib directory, or EAR lib directory.
If that's not practical, if you use NodeManager to start your servers, you can go to the "Server Start" tab in the server definition in the WebLogic console and edit the "Classpath" field, which defaults to no value. You can specify a classpath value there. Note that if you specify a value there, it REPLACES the default classpath for the server, it doesn't add to it. If you need to just add to it (a much more likely scenario), if the value references the value "$CLASSPATH" in it, that will reference the original classpath value that the server would have had.
So, for instance, if you wanted to include the MQ jars in the server classpath, you could set a value like this:
/usr/java/mq/lib/mq.jar:/usr/java/mq/lib/mqstuff.jar:$CLASSPATH

How can I set home page for a new tab? how can i get firefox to open the home page every time i open a new tab in Windows vista home basic??

How can I set home page for a new tab? how can i get firefox to open the home page every time i open a new tab in Windows vista home basic??
== This happened ==
Every time Firefox opened

Firefox can have multiple home pages if you wish. Each home page that will open when starting Firefox is separated by the "|" character.
See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
To have new tabs open a specific web site, add one of the following extensions:
http://sogame.awardspace.com/newtaburl/
https://addons.mozilla.org/en-US/firefox/addon/777

How can I set default values for Allocate Mode in AO config?

Hi, How can I set default values for allocate mode in AO config. To be specific, in the attached vi, I need to set the Allocate Mode in AO Config to 'Use FIFO Memory (6)' if the value inside my case structure is false and to 'no change (0)' if the value inside the case strusture is true.
Solved!
Go to Solution.
Attachments:
generateWaveformFIFO.vi ‏15 KB

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

How can you set a ringtone for unknown numbers

How can you set a ringtone for unknown numbers?

You can set up each one of your contacts with a ringtone and use the default for all other unknown numbers. There is no way to set up a ringtone for unknown numbers.

HI,How can i set delta option for costumised Generic data source

Hi Sir/Madam,
How can i set delta option for costumised Generic data source.
Regards,
Vishali.R
Please search the forum before posting a thread
Edited by: Pravender on Aug 15, 2011 1:26 PM

Hi,
Go to RSO2 transaction and click on change then on the tool bar click on Generic Delta button. In the next popup you can set your delta.
Regards,
Durgesh.

How can i set the orientation for a photo book (horizontal or vertical)

how can i set the orientation for a photo book (horizontal or vertical)
I like a photo book vertical format and i cant findet!!

That was quick! Although my earlier search turned up nothing, when I posted my question the system immediately gave me a list of previous questions among which I found the following answer:
This solved my question by LarryHN on Aug 18, 2010 6:01 PM
select the photos and change the date/time - photo menu ==> adjust time and date to make a relative adjustment to a number of photos ==> batch change ==> time and date to set an absolute time date for them
LN

HT204053 Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

Go to Settings>iCloud and sign in with your Apple ID to create the account. Then turn on the data you wish to sync with iCloud. See http://www.apple.com/icloud/setup/ios.html.

How can I record the audio for a radio station I'm streaming LIVE?

How can I record the audio for a radio station I'm streaming LIVE?
I don't want to record the sound in my room, but only on the sound I'm streaming

Grane Duke wrote:
To reduce or make the room noise as low as possible (to get the best audio recording), I recommended the OP to try to record the radio live streaming audio in a silent room. Does it makes any sense to you....??
No. Preferably one records using direct input.
Your comment It doen’t matter whether he/she is recording the audio from the macbook or any external speakers because if the room is noisy than obviously the ambient room noise will be recorded. is pretty silly really. Think about what you just wrote.
And you do have a bad habbit in your posts of over using ???????? & !!!!!!!!!!!!!
One is enough.
Cheers
Pete

How can I set up Lync for my personal use?

How can I set up Lync 2013 for my personal use. I don't have any personal domain (using outlook, hotmail etc) or any server. Is there a way, I can still set up Lync on my PC? Please advise.

You can't use a personal email account (MSN/Gmail/etc..)
to sign into the Lync client. You can purchase an account from Lync Online: http://office.microsoft.com/en-us/lync/lync-online-overview-and-features-online-meetings-and-instant-messaging-FX103789571.aspx

How can i set different font for different tabs/pages

I want to set different fonts for different tabs/pages?
is it possible to do the same? If yes how?
I can change the fonts under tools>options>contents>advanced. but that changes global settings.
tried some add ons too- but that too changes the global settings.
some pages like tweetdeck do not display icons etc properly under custom fonts.
when i check "allow pages to select their own font" tweetdeck shows up fine but a number of other pages show fonts that are too big or some non standard fonts.
Is there a way where i can select site default fonts for some sites/tabs, and custom fonts for other sites/tabs?
otherwise i have to open different sites in different browsers- say i use my custom fonts- which apply globally, and open tweetdeck etc in Internet Explorer or Chrome etc. if i can have all tabs in one window/browser, that would be great.

It's not a built-in feature to override a page's styles on a tab-by-tab or site-by-site basis, but perhaps someone has created an add-on for this?
It also is possible to create style rules for particular sites and to apply them using either a userContent.css file or the Stylish extension. The Greasemonkey extension allows you to use JavaScript on a site-by-site basis, which provides further opportunity for customization. But these would take time and lots of testing to develop and perfect (and perfection might not be possible)...
Regarding size, does the zoom feature help solve that part? In case you aren't familiar with the keyboard and mouse shortcuts for quickly changing the zoom level on a page, this article might be useful: [[Font size and zoom - increase the size of web pages]].

Dual 24" LED displays - how can I set up audio for "real stereo"?

Similar Messages

Maybe you are looking for