Dual 2ghz G5 appears with only one processor in Activity Monitor

Here's something I haven't seen before... a dual 2ghz G5 appears as a single processor machine in Activity Monitor. I ran the hardware test from the CD and everything checked out fine. I then rebooted and zapped PRAM using commandoption+PR... I held the keys down for a while and zapped it three times. System booted up and showed both procs in Activity Monitor. Restarted system again and now shows only a single CPU.
Anyone seen this before?
TIA!
G5 dual 2ghz   Mac OS X (10.4.8)  

Did you ever use CHUD or Open Firmware to disable a cpu?
My preference with G5s is to boot into Open Firmware and
reset-nvram
set-defaults
reset-all
which should and is easier to rebuild the device tree rather than zap pram (once is enough, older OldWorld systems urban legend was you needed multiple reboots to be sure).

Similar Messages

  • Can inherited events be used with only one processor?

    Hi friends!
    The question is quite simple: I have one parent event and several events which inherit from the first one. Every inherited event has its own properties and also the inherited properties (which have public visibility in the parent class so that the inheritance is automatic). I pass events to the CEP processor but it only works with the parent class and doesn't with the child ones. I mean, I'm using only one processor and only one CQL sentence.
    Is it neccesary to configure one processor for every inherited event?
    Thanks!

    Hi friend!
    Here you are:
    <?xml version="1.0" encoding="UTF-8"?>
    <beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:osgi="http://www.springframework.org/schema/osgi"
    xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
    xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
    xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
    xmlns:application="http://www.bea.com/ns/wlevs/config/application"
    xsi:schemaLocation="
    http://www.springframework.org/schema/beans
    http://www.springframework.org/schema/beans/spring-beans.xsd
    http://www.springframework.org/schema/osgi
    http://www.springframework.org/schema/osgi/spring-osgi.xsd
    http://www.bea.com/ns/wlevs/spring
    http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
    http://www.oracle.com/ns/ocep/jdbc
    http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
    http://www.oracle.com/ns/ocep/spatial
    http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd
    http://www.bea.com/ns/wlevs/config/application
    http://www.bea.com/ns/wlevs/config/application/wlevs_application_config.xsd">
         <bean id="myConverter" class="com.bea.wlevs.adapter.example.mesevents.MeSEventsAdapter"/>
         <wlevs:adapter id="jmsInbound" provider="jms-inbound">
              <wlevs:listener ref="mesEventsChannel" />
              <wlevs:listener ref="inputPetitionChannel" />
              <wlevs:instance-property name="converterBean"
                   ref="myConverter" />
         </wlevs:adapter>
    <wlevs:event-type-repository>
    <wlevs:event-type type-name="MeSEvent">
    <wlevs:class>com.bea.wlevs.event.example.mesevents.MeSEvent</wlevs:class>
    </wlevs:event-type>
    <wlevs:event-type type-name="InputPetition">
    <wlevs:class>com.bea.wlevs.event.example.mesevents.InputPetition</wlevs:class>
    </wlevs:event-type>
    </wlevs:event-type-repository>
    <wlevs:channel id="mesEventsChannel" event-type="MeSEvent" advertise="true">
    <wlevs:listener ref="mesEventsProcessor"/>
    </wlevs:channel>
    <wlevs:channel id="inputPetitionChannel" event-type="InputPetition" advertise="true">
    <wlevs:listener ref="mesEventsProcessor"/>
    </wlevs:channel>
    <!-- The default processor for OCEP 11.0.0.0 is CQL -->
    <wlevs:processor id="mesEventsProcessor" />
    <wlevs:channel id="mesEventsOutputChannel" event-type="MeSEvent" advertise="true">
    <wlevs:listener>
    <bean class="com.bea.wlevs.example.mesevents.MeSEventsBean"/>
    </wlevs:listener>
    <wlevs:source ref="mesEventsProcessor"/>
    </wlevs:channel>
    <wlevs:channel id="inputPetitionOutputChannel" event-type="InputPetition" advertise="true">
    <wlevs:listener>
    <bean class="com.bea.wlevs.example.mesevents.MeSEventsBean"/>
    </wlevs:listener>
    <wlevs:source ref="mesEventsProcessor"/>
    </wlevs:channel>
    </beans>
    It says the following:
    As you can see there are two input channels which are both connected to the JMS adapter as well as only one processor which is connected to the input channels and to the output channels. It is supposed that each event goes through each input and output channel but it fails and says the following:
    Channels mesEventsOutputChannel and inputPetitionOutputChannel from the same query must have the same event type.
    InputPetition is MeSEvent's child. It inherits all MeSEvent's preperties.
    Does anybody know what is happening?
    Thanks!

  • Multitasking appears after only one click

    Multitasking bar appears with just one click.  Sometimes pushing Home Button does nothing and must be pushed again once.  Sometimes Camera Button appears after touching Home Button only once.

    Clicking once in a white space does not open the advanced editor.
    This is only initiated if you click twice in a white space.
    However, the point that some people keep clicking twice either because of their computing habits in a word processing package or otherwise has been taken on board by the developers. As you say, people like yourself found the pop up irritating and wanted it removed from so easily being selected.
    You will be pleased to hear that if you update to 31.1.0 then you will find that accessing the advanced property editor has been prevented from opening using the double click.
    The Thunderbird program is not stored in the same place as the Thunderbird Profile folders.
    So updating via 'Help' > 'About Thunderbird'
    click on 'Check for updates'
    will not have any effect on folders.
    You could also uninstall the current Thunderbird via Control Panel > Programs and Features and then download from here:
    * https://www.mozilla.org/en-US/thunderbird/all.html
    However, it is always a good idea to backup your Profile just in case :)
    You can use MozBackup tool to backup a Profile or use ImportExporttool to backup emails or you can manually copy the Profile folder.
    Suggest you save all backups to an external storage device for safe keeping.
    Here is info on Backup:
    * http://kb.mozillazine.org/Profile_backup
    * http://kb.mozillazine.org/MozBackup
    ImportExporttool:
    * https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/

  • I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

    I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

    I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
    iPhone 5s, iOS 8.3

  • HT204088 How how can I synch my ipod + iphone music to my new computer? I get the same error  "my ipod or iphone is synched with another itunes library.An Ipod can be synched with only one itunes library at a time. What would I like to do Erase and Synch

    How can I synch my ipod & iphone music (purchased from itunes on my old laptop) to my new laptop? I keep getting the same message on my itunes on my new laptop: " The ipod/Iphone is synched with another itunes library. An ipod/iphone can be synched with only one itunes library at a time. What would you like to do - Erase and Synch or Transfer Purchases?" What do I do?
    A couple of other items:
    1) I am guessing Apple does not keep a history of all my music purchases? As I did not have my entire library backed-up anywhere, and relying on the music I have on my ipod and my iphone as my only source of itunes music....I have lost over 500 songs!!!
    2) I used to have an Apple account under another account name, and since have switched to a new account name. Is there anyway to find the history of purchases from my old Apple account name and transfer these over to my new account name and onto my new laptop?
    I hope someone can help, I am having a very difficult time trying to obtain answers. Angie

    The iphone/ipod is NOT a storage/backup device.  Not maintaining a backup copy is a big mistake.
    You can transfer itunes purchases from your iphone/ipod to your computer:
    Authorize your computer for all accounts and then click  File>Transfer Purchases

  • How to connect many devices with only one FW800 port in iMac?

    Hi,
    I am upgrading to a new Intel iMac from a 2004 vintage Dual2.0GHz PowerMac. I currently have 8x d2 Quadra drives chained by FW800, and 2x Iomega drives connected vis FW400 hub which also connects HD cams.
    My questions is that with only one FW800 port in iMac, I think my devices connectivity is the following?
    (1) Get a FW 800 hub (I can only find 2 port ones at the Apple store and BestBuy)
    (2) Connect the d2 Quadras to one port of the FW800 hub
    (3) Get a FW 800 to FW 400 cable
    (4) Connect my 6 port FW400 hub to the 2nd port of the FW800 hub
    Thanks for reviewing this solution, and I would also appreciate other suggestions or hear about your experiences if you have a similar set-up.
    Will

    In addition to your listed considerations, you should consider the following.
    Many storage needs do not required FireWire 800 speed. For example, USB 2.0 works fine for your Time Machine backup drive. If you are just storing user data such as your iPhoto or iTunes media files, USB 2.0 is more than fast enough. So, as much as possible, if any of those external drives have USB 2.0 connections and the data storage does not need FireWire 800 speed, offload as much as possible to USB 2.0. I used to be a +FireWire snob+, but since getting an Intel iMac, I find that USB 2.0 works quite well for most data storage purposes.
    There are new hard drives that are power efficient and as large as 2TB. Consolidate your data storage needs onto a smaller number of very large drives, partitioned as needed. This will make your setup more reliable (smaller number drives), and save reduce power consumption. If any of your current externals are SATA, you can probably replace the existing drive with an extra large one.
    So, I think you setup should be, extra large FireWire 800 drive connected to the FireWire 800 port directly. Using a 9-pin to 6-pin cable, connect the FireWire 400 hub. Connect any non-storage FireWire 400 devices there. Do some data transfer testing to make sure having the 400 hub there on the chain does not cause the 800 connection to slow down.
    Connect other drives as needed using USB 2.0, existing or new. Retire the smaller of your external drives.

  • HT4527 an iphone can be synced with only one itunes library at a time error on same pc

    an iphone can be synced with only one itunes library at a time error on same pc why?

    Damaged library... See Empty/corrupt library after upgrade/crash.
    tt2

  • An iPhone can be synced with only one iTunes library at a time

    I recently bought a MacBook Pro, and I figured it would be pretty simple to move my iPhone to sync with iTunes on the Mac from iTunes on my pc, afterall it is the same program and both are designed for the iPhone.
    I have been successful in getting the Contacts and Calendar to sync, but the Music, Applications, Video and a few other things give me this message when I check the sync box:
    "The iPhone is synced with another iTunes library. Do you want to erase the iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
    Obviously, I don't want to erase everything. Actually, I don't care about Music, Videos, Podcasts or Ringtones as I don't have any, but I do care about Photos and Applications. Actually Photos I can reload too, but I don't want to loose the apps I have purchased with the iTunes App Store.
    I even tried going back to the PC and unchecking the Sync boxes on it, hoping this might disassociate it from the phone, but now even on that PC I get the same message.
    How do I disconnect phone from the old iTunes and be able to sync it to the new iTunes? This should be simple right?

    I made an appointment with a Mac Genius and I will say that while it was better than getting to talk to India on a poor quality phone call it was just about as helpful. Sure she was cute and friendly, but I left without my issue resolved and was surprised that I didn't even get a followup from anyone asking about my experience (hence my venting here)
    Anyway, I found a solution for my issue here: http://tinyfish.net/2008/07/18/how-to-sync-iphone-with-multiple-computers/
    This is a real solution to the issue, and has the benefit that I can do this to as many machines as I need and sync at any of them instead of just one. Hopefully, Apple doesn't delete my response since it truly is the answer to the problem and others might be looking for the same solution.

  • I got a new pc and I am getting this message: The ipod 'harms ipod' is synced with another itunes library  Do you want to erace this Ipod and synce with this itunes library?  An Ipod can only be synced with only one itunes library at a time.  Erasing and

    The ipod 'harms ipod' is synced with another itunes library.Do you want to erase this ipod and sync with this itunes library?  An ipod can be synced with only one itunes library at a time.  Erasing and syncing replace the contents of this ipod with the contents of this itunes library.
    I don't know what to do?  I should save my library before I replace the contents, but I don't know how to do that! HELP!!

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod "Rick's IPOD" is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?

    I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod “Rick's IPOD” is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?

    Same as you would if you bought a pc; copy everything from your old computer to your new one.  Then you can just sync everything from the new computer, as you did with the old one.

  • I formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options,  1- erase and sync, 2- transfer purchases. what to do?

    i formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options,  1- erase and sync, 2- transfer purchases. what to do?

    Follow these instructions:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • I want to make a video clip using two still pictures, placing side by side.  I am able to make with only one at a time.

    I want to make a video clip using two still pictures, placing side by side.  I am able to make with only one at a time.  Also, I am able to move the picture using Transform.  But unsuccessfull in making with two stills in same clip.  Thank you for reply.

    If you want a Picture in Picture effect, stack one still on top of the other with a connect edit. Use Transform to scale and reposition the top image.
    Russ

  • I created a book in iBooks Author using the Photo Book template. When I rotate to portrait orientation, the photo or widget disappears and a table of contents appears with only the interactive media showing.

    I created a book in iBooks Author using the Photo Book template. When I rotate to portrait orientation, the photo or widget disappears and a table of contents appears with only the interactive media showing.

    Thanx for the prompt response, KT. I have indeed seen that thread, only just after I posted the question.
    I have spent hours on the phone with what I now know is a call center in Texas on this question.
    I think Apple could be a little more "hands on" with iBooks Author users, and it should also be pointed out that landscape photos will not display in portrait mode.
    In my case, I used gallery widgets to display vertical photos, since they look better in portrait mode.
    But instead of simply rotating, the page disappears and a TOC of interactive media appears. The gallery behaves as expected when tapped. This is not what I expected, but since the gallery works, I can live with it.
    Right now I have "tickets" telling me to "fix" this "problem or to disable portrait mode.
    I don't want to disable portrait mode.
    Will Apple accept the books if I tell them this is not an "error?"

  • Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

    Below issue is with only one client in that untrusted domain. So boundary is not the issue.
    Env -
    mydom.com has SCCM PRI site (MP, DP as well).
    Client is in untrusted forest.
    Please help.
    Thanks
    MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="pri"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name="staging.local"/>
        <Domain Name="staging.local"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Received header '<Msg SchemaVersion="1.1">
     <ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
     <SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
     <SourceHost>pri1SCCM02</SourceHost>
     <TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
     <ReplyTo>MP_LocationManager</ReplyTo>
     <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
     <Priority>3</Priority>
     <Timeout>600</Timeout>
     <TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
    Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
    Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
    PM 4816 (0x12D0)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
    Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
    Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
    Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
    MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
    ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000.  The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    A Fallback Status Point has not been specified.  Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

    Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
    That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
    This line jumps out at me in the log file though: "An MP exists on this machine".
    That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Can I run the new Mac pro (6.1) with only one stick of ram?

    Will that cause any problems. And if not how much will the overall quality be affected. it won't be a permanent solution, but for a few weeks at least. So can it happen? Can I run the Mac pro 2013 with only one memory stick?

    Per this
    http://blog.macsales.com/22745-mix-and-match-more-memory-faster-mac-pro-2
    the 2013 Mac Pro is the only MP that can use a single stick of memory.

Maybe you are looking for