Dual Accounts?

Hey folks, my first time here.
My question is this:
I have recently launched a business, and I would like to open a skype account for the purposes of allowing my tech savy clients contact me via skype.
I am also an avid gamer, and use skype constantly for this. So I am wondering if it is permitted for me to open a second skype account for this purpose, since I obviously don't want my clients seeing me as "The Blasticator" or w/e name I happen to be using for my gaming purposes.
Or, is there some way for me to create a partition in my current account, setting two different, active profiles for my two seperate purposes?
Any help / suggestions would be greatly appreciated
Solved!
Go to Solution.

Hi, arkus_1, and welcome to the Community!
Yes, you may have multiple Skype accounts.
Yes, you may run mulitple accounts simultaneously ... please see this How-To article:
https://support.skype.com/en/faq/FA829/how-can-i-run-two-skype-accounts-on-the-same-computer
No, Skype has no facility to do this: "...is there some way for me to create a partition in my current account, setting two different, active profiles for my two seperate purposes?"
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

Syncing two computers to a dual account setup on a third computer

We have 3 computers, with the third being used with dual accounts when we travel. Is it possible to sync one computer with my account on the 3rd, and then sync the 2nd computer with the other account on the 3rd?
Hope this makes sense!

I think so. I have two accounts on the same computer syncing with others (and themselves). I had to set up both independently, so I'm pretty sure that the fact that they were syncing with the same profile is not relevant.

Dual account issue...

I set up a second iTunes account when I created my mobile me account at the time of purchase of my iPhone. I did have an iTunes account before that however... Before I caught my mistake, I had downloaded and installed apps using both accounts. I tried to merge the two in some sort of 3am digital debacle and think I just scuttled the original account and confused myself with a password change. I don't know the PW and the email associated with the original account, and it seems to not be on record.
I am not able to update the apps from the account I first set up and used to DL & install apps.
From the phones app updater it prompts me to enter pw for each account, but won't access the store for my old account due to the password not being correct, but will install updates for the "new" account I set up. From the iTunes interface while trying to update apps I get an error 414 message and none of my apps update. I have done the basic reset, restart type trouble shooting and have been unsuccessful as of yet.
Any help would be greatly appreciated!

Apps are DRM protected & tied to the account that was used to originally purchase them. Only that account can ever update those apps or re-download them for free, should that need ever arise. You can't merge two separate itunes accounts, so you can stop trying to do that. Only itunes support can help you sort this out, and there's no guarantee they will. You'll get an answer in 24hrs:
http://www.apple.com/support/itunes/

Administrator account keeps getting deleted

Is it possible to have two Administrator user accounts in Lookout? On one system, I have my Administrator account and my customer wanted to have his own account. We are seeing a situation where both accounts disappear. Is the dual account the reason for this?
If so, I will tell my customer to either use mine or create another that I will use to administer the system.
Thanks in advance!
Roger

Hi Ryan, thanks for the response.
It has happened several times in the last month or so. On Monday, the manager at one of our districts was locked out of Lookout. I finally directed him to use task mgr to "end task". Task mgr reported that Lookout was not responding and we had to "end task" several times to get out. When he relaunched Lookout, all the user mgr entries were gone. I had him set up just one admin and the 2 operator accts. We exited and relaunched Lookout several times after that without a problem.
I am concerned about Citafel database corruption, do you think that is a valid concern?
The system is Lookout 6.0.2.
Best regards
Roger

Getting Error while posting through KB11N : No true sender object entered

HI Expert,
We have stastical internal order defined and same we are using in Asset. Let me explain the scenarion.
We created the Purchase requisition with the stastical Internal Order then we did Purchase Order and MIGO -Goods Receipt.
Now we realised that wrong Internal Order was used. Now we want to tranasfer cost from that Internal order to New Internal Order. we are trying to post through KB11N but while giving the all details i am getting error as per below;
No true sender object entered
Message no. BK175
Diagnosis
You have entered a statistical object as a sender. Statistical objects, however, are only intended for use with dual account assignments.
Procedure
1. If you require a dual account assignment, enter a true object as a sender also.
We are using cost element with having cost element category 90.
I don't no which is the true sender Object.
Thanks in advance
ealry help will be highly appreciated.

Your postings had happened to a statistical internal order. I hope the real postings might have happened to a cost centre.
You cannot settle anything from a statistical internal order. It is just for information purpose only. If the above posting had captured a cost centre (real posting), you can distribute/assess the cost from the cost centre to a real internal order for your purpose.

Multiple Macs... sharing same iTunes folder....

Not sure if there's a solution or not....
I have an external drive hooked up to my Airport Extreme. it's a shared drive for 3 of my Macs. That's where the iTunes folder is located for all machines as well (The drive is specifically for shared media).
Now... if computer 1 downloads or imports new music to their iTunes list, it's auto copied to the external drive in the iTunes folder. But computers 2-3 don't see the new music automatically in their iTunes library. I understand why, but is there ANY solution to "finding new media" within the folder?
Rather than importing the music manually 4 times (3 commputers and 1 with dual accounts), is there a script or does ANYONE have any ideas??
Thanks in advance!
MacBook Pro 17", iMac 1.25 GHz G4, iMac 450 MHz G3 Mac OS X (10.4.9)

Did you ever come up with a solution for this? I'm trying to do the same thing with my setup, 4 macs with shared external disk over Airport Extreme

What's the best way to wipe user info on OSX without doing a clean install of the OS

Hello,
I am going to give my old imac to my nephew so I want to delete myself as an Administrator and user (ie, remove all traces of my personal info). However I DO NOT want to delete all the installed applications I have installed over the years as they are useful to him.
Should I just set up a new admin and delete mine or are there other things I can/should do to 'clean out' myself from the system? (preferences, etc.)
Thank you!

chungster wrote:
Will deleting my admin account delete all my saved passwords in the keychain?
Yes
How about my old emails? In addition to Mail, I used to use Thunderbird. Are there any special places that I need to delete files from for those apps?
Yes old emails are gone. No special places for Thunderbird, emails are kept in the User account folder.
And finally, if he wants to keep my itunes music, can i just drag my itunes folder into his account prior to deleting my account?
This is a copyright violation in most cases unless the music is free of that or the license allows it.
You should deauthorize the iTunes account in the User accounts being deleted, copy protected iTMS content won't play on his account. iTMS music is not copy protected but there is a 5 machine/device limit.
You can transfer music and other files to his account through the Finder > Computer > Macintosh HD > Users > His account > Public > Dropbox that will change the user permissions on the files.
Any iTMS purchased content is digitally signed with your personal information embedded into the files themselves.
If your nephew goes and P2P's your files, you could be held liable for copyright infringement.
If the music files are cd rips, then there is a good chance they are not digitally signed, however Apple might have done something to the files in the background to assist the RIAA against piracy.
There is a 5 device limit to iTMS content, so technically since he's family you can control that and it's included in the iTMS content license, but that doesn't apply to cd rips.
He might not like your music anyway and then seek to share it to get more he does like. So it depends upon the skill level of your nephew if he will do that or not.
Set up his account on the machine, maintain dual accounts until it's all set up, then log into his and delete your account.
Copy protected apps with one machine licenses that "phone home" you will have to either delete or buy another license for the new machine if it's a Mac.

Oracle Financials Functional Situational Interview Questions

Hello Oracle Fin Brothers,
For Oracle Financial Functional Consultant
I am new in Oracle Financials, Just completed my training and I am having my first interview Thursday; the recruiter tell me the first step will be Situational Interview and I really don't understand what this mean; can some one tell me exactly how is an Situational Interview in Oracle Financial Functional? what are the possible questions and answers? did some one have a list of situational interview questions and answer to help me with? I will really appreciated.
The second step will be Skill interview; what is the difference with situational interview? what are the possible questions and answers? can some one provide a list of possible questions and answers? for Oracle Functional consultant?
Hope to get some helpful post
Thanks
Ferrari

Hi,
I can tell you about my experience in different process.
I usually have a first interview with the recruiter/agency this first interview is quite general, he usually review your CV, job history,... the recruiter ask you about your interest or motivation for that process, if you are willing to travel, reallocate, etc.. your salary expectations and your knowledge in the different modules. This is the easier interview and if everything is ok, the recruiter will tell you for next steps, probably about the project, the employer, etc...
In the second interview normally is with the consultancy company, with the manager and an experience consultant that usually asks about technical questions, they ask for example, how to setup a dual accounting process with SLA in GL, which reports you would use to reconcille AP/AR and GL, how many segments do you need to setup in GL for a specific business situation, how to load assest in FA, which are de accounting steps from buy goods until you account the AP invoices,...
In some cases you have also a final interview with customer just to get the final approval, but the really important one is the second interview.
Good Luck ;-)
xhuertax

Subscription terminated early and then I repurchas...

I am haing multiple Skye problems that all started with a billing error to which I got no response. What happened is I called Australia one day and at teh end of the call Skye told me my subsciption had expired which is odd because my subscription is NOrth America only and it should have lasted well into next year. I placed a North American call and sure enough it would't go through. So then I buy a North American subscription and tthe website tells me I have two! Are these concurrent and if so how do I undo this. The other problem which cropped up immediately is that when I dial out the caller ID shows as 011-0000-0123456 even though I have a SKype number in good standing. Now here is a real strange part, Sometimes when I dial out on Skype to my cellphone it shows my Skype number 360-xxx-yyyy for one ring and then switches to another call on 011-0000-0123456. And there is yet another problem. Sometimes (most fo the time) when I call into my Skype number it rings 4 times and then rather than go to voice mail it gives a busy signal. I posted on the account issue but got no response. This is the problem with Skype. If it works great but when it doesn't tyou just through money away,

I have a strong working knowledge of telecomm and here is what I think is happening. Call setup is I believe an atomic transaction. That is nothing can happen until that state can complete so here goes. When I place a call Skype looks up my account(s). It finds my aread code 360 account first and places a call. This process can not be interrupted. The call is placed and now the other acount is returned. Skype places a second call but cannot us the first caller "ID" because it is in process so it places a second call on a made up caller ID which I see as 011-0000-0123456. What I see on my cell phone is a call coming in from 360 area code and then seconds later a second call from 011-0000-0123456. That seems to make sense although it is completely wrong.
On incoming calls Skype starts placing a call to 360 area code. While the call is in the setup state Skype tries to place a second call on the second subscription but cant use the same inward DID because it is busy hence the busy signal. What I get when I dial in is 1-4 rings (usually 4) and then a busy exactly as above.
I may be wrong but this seems to explain the call problems and dual account problem that all started at the same time. To fix this Skype would need to remove the dual subscription and then add the second on as consecutive. There are two Skype bugs. One is that it expired my subscription early and two it is an impossible state to have two unlimited North America plans on the same account. This should not have been allowed to happen. Note that even on a landline or call phone the same call processing applies although it will never occur in practise because you cannnot place two phone calls from one number to the same number at the same time. You cannot have two inward calls on the same physical line or cell phone to the same DID at the same time.
Maybe a VOIP expert or Skype can respond.

Sr.Oracle Financials Functional consultant - Toronto

A multinational company is looking to hire a Full-Time Oracle Financials Functional consultant
1. Minimum 5 years experience in GL,AP,AR,FA and PO modules of Oracle 11i Applications with at least one full implementation.
2. CMA/CFA or CA qualification is a plus but not required.
Interested? or if you know someone who may be interested.
Please send resumes to jobs AT bizarrays.com
Salary : CAN $70K to 100K (based on experience)
Note: Candidates must be Canadian citizens or Permanent residents.

Hi,
I can tell you about my experience in different process.
I usually have a first interview with the recruiter/agency this first interview is quite general, he usually review your CV, job history,... the recruiter ask you about your interest or motivation for that process, if you are willing to travel, reallocate, etc.. your salary expectations and your knowledge in the different modules. This is the easier interview and if everything is ok, the recruiter will tell you for next steps, probably about the project, the employer, etc...
In the second interview normally is with the consultancy company, with the manager and an experience consultant that usually asks about technical questions, they ask for example, how to setup a dual accounting process with SLA in GL, which reports you would use to reconcille AP/AR and GL, how many segments do you need to setup in GL for a specific business situation, how to load assest in FA, which are de accounting steps from buy goods until you account the AP invoices,...
In some cases you have also a final interview with customer just to get the final approval, but the really important one is the second interview.
Good Luck ;-)
xhuertax

Split range of dates into rows

Hi,
I have a table which basically has an account id and two dates (from and to). Sample data:
Account ID       Balance Amt        Valid From           Valid To
100000524       104.32               29/07/2010         05/08/2010
100000524       104.32               03/11/2010         25/12/2010
100000365       104.32               29/07/2010         05/08/2010What I currently do is that I loop on each record (per Account and Order by valid From). Then each row I processed into this query to split it into multiple rows - final result should be that for each of the month on the range I'll get the last day of it. See below for results:
select account_id, balance_amt,
       last_day(add_months(valid_from_dttm, level - 1)) as valid_to_dttm
FROM d
CONNECT BY LEVEL <= ( SELECT TRUNC( MONTHS_BETWEEN( LAST_DAY(valid_to_dttm),
                                                    TRUNC(valid_from_dttm, 'Month'))
                                  ) + 1 lvl
                      FROM dual )
Account ID       Balance Amt        Valid To
100000524       104.32               31/07/2010
100000524       104.32               31/08/2010 It's pretty slow since I do it row by row. Is there any other way (faster) to do this? Thanks.
I forgot to say is that one of the trouble I'm getting here is that the dates are overlapping e.g.:
Account ID       Balance Amt        Valid From           Valid To
100000524       104.32               29/07/2010         05/08/2010
100000524       65                     05/08/2010         25/10/2010
100000524       10                     25/10/2010         20/12/2010So in this case the August month should only be displayed once with the value of 65 since it's the "latest".
Edited by: mortonmorton on Apr 25, 2011 2:14 AM
Edited by: mortonmorton on Apr 25, 2011 2:19 AM

Hi Guys,
I've tried both your queries and it's the same issue I'm getting which is duplicate rows of the month end dates. So using the model clause above (just tweaking the data):
with d as
( select 100000524 account_id, 104.32 balance_amt, to_date('29/07/2010','DD/MM/YYYY') valid_from_dttm, to_date('05/09/2010','DD/MM/YYYY') valid_to_dttm from dual union
select 100000524, 16.32, to_date('05/09/2010','DD/MM/YYYY'), to_date('25/12/2010','DD/MM/YYYY') from dual union
select 100000365 , 104.32, to_date(' 29/07/2010 ','DD/MM/YYYY'), to_date('05/08/2010','DD/MM/YYYY') from dual
select account_id, balance_amt, last_day(add_months(valid_to_dttm,-1)) new_valid_to_dttm
from d
model
partition by (account_id, balance_amt, valid_from_dttm, valid_to_dttm vtd)
dimension by (0 d)
measures (valid_to_dttm, valid_from_dttm vfd )
rules
valid_to_dttm[for d from 1 to
                      MONTHS_BETWEEN (LAST_DAY (valid_to_dttm[0]), TRUNC (vfd[0], 'Month') )
                      increment 1] =   add_months(valid_to_dttm[cv()-1],1)
order by account_id, valid_to_dttm
ACCOUNT_ID     BALANCE_AMT     NEW_VALID_TO_DTTM
100000365                     55.63     31/07/2010
100000365      55.63     31/08/2010
100000524      104.32     31/08/2010
100000524      104.32     30/09/2010
100000524      104.32     31/10/2010
100000524      16.32     30/11/2010
100000524      16.32     31/12/2010
100000524      16.32     31/01/2011
100000524      16.32     28/02/2011But expected output should be:
ACCOUNT_ID     BALANCE_AMT     NEW_VALID_TO_DTTM
100000524                104.32     31/07/2010
100000524      104.32     31/08/2010
100000524      16.32     30/09/2010
100000524      16.32     31/10/2010
100000524      16.32     30/11/2010
100000524      16.32     31/12/2010
100000365                55.63     31/07/2010
100000365      55.63     31/08/2010One thing to note here is the September month which had a final value of 16.32 - it overlapped the previous entry of 104.32.

Motion 5 with Mavericks - Only seeing a 2" by 2" window.

I have a project I have been working on for about a week. This morning it loaded in Motion but came up in a 2 inch by 2inch window without a title bar or an ability to enlarge it. It shows a small part of the timing pane with no way to scroll or move anything. I've reinstalled Mavericks and Motion in multiple orders several times and also have reset preferences both manually and with a download of digital revolution's tool. No effect. You can still open any existing motion file, but the project still comes up in the small unmoveable window. You can also start a new project but it appears in the same limited window. Most of the menu commands still work with the exception of any of the commands that releate to manipulating windows (e.g. minimize), multiple display selections and file close. Even the export commands still work.
Any ideas on where to start to fix this one?

Thanks Jim! Moving out the Layout folder did the trick and all is back to normal. BTW, "revert to original layout" was greyout. I didn't think to look down the Application Support path as I presumed that uninstalling with the FCS Remover would have cleaned all that out.
FYI, for the sake of other people with a similar problem, the only other emergency fix I came up with was to add a new user profile to my Mac. Under a new account, the file came up in Motion without issue and I was able to make my deadline, although I had to hassle with moving all my media files over to the new profile and the ugly resulting dual account issues.
You suggestion saved me a ton of work and is greatly appreciated. If you are ever in Boston, I'd be happy to buy you a beverage(s) of your choosing! Marty

PowerBI API Usage - Sample app - UserNotLicensed

Hi, I have a working PowerBI Public Preview account.
I'm trying to use the PowerBI RestAPI but keep getting "User is not licensed" (the sample app is here: https://msdn.microsoft.com/en-US/library/dn931282.aspx#Configure)
The user is provisioned correctly in Azure Active Directory, as specified by the link above. What am I missing? Do
I need to change the baseURI in the PowerBIModel for the sample app? (see below).
C# code (line 19 in PowerBIModel.cs in the SampleApp
static Uri baseAddress = new Uri("https://api.powerbi.com/beta/myorg/");I have tried replacing "/beta/myorg" with "myADName.onmicrosoft.com/myAppName"
as suggested here: https://msdn.microsoft.com/en-us/library/dn877544.aspx
but I arbitrarily get either "UserNotLicensed" or "Invalid JWT token"
Thank you for any help you can offer.

In case anyone else keeps getting the same error ...
I think It was caused by a simple cookie issue as follows....just use a different browser & clear cookies/cache if you are testing with >1 PowerBI account....and make sure to use an AzureAD user you created within AD, not your generic Azure acct.
I was signed into "Account1", which was not part of my AzureAD...but it had a PowerBI subscription.
When I ran my webapp on localhost, it asked me to sign in to PowerBI via Oauth. So I signed in using [AzureAD member acct] "Account2". (or it just signed me in directly..probably to Account1)
It kept trying to use Account1 to authenticate...as the issue disappeared when I switched browsers and cleared cookies in the new browser. Occasionally I also
got the message "Request headers too long"....for the same dual account reason..same fix.

PowerBI API Usage - Sample app

Hi, I have a working PowerBI Public Preview account.
I'm trying to use the PowerBI RestAPI but keep getting "User is not licensed" (the sample app is here: https://msdn.microsoft.com/en-US/library/dn931282.aspx#Configure)
The user is provisioned correctly in Azure Active Directory, as specified by the link above. What am I missing? Do
I need to change the baseURI in the PowerBIModel for the sample app? (see below).
C# code (line 19 in PowerBIModel.cs in the SampleApp
static Uri baseAddress = new Uri("https://api.powerbi.com/beta/myorg/");I have tried replacing "/beta/myorg" with "myADName.onmicrosoft.com/myAppName"
as suggested here: https://msdn.microsoft.com/en-us/library/dn877544.aspx
but I arbitrarily get either "UserNotLicensed" or "Invalid JWT token"
Thank you for any help you can offer.

In case anyone else keeps getting the same error ...
I think It was caused by a simple cookie issue as follows....just use a different browser & clear cookies/cache if you are testing with >1 PowerBI account....and make sure to use an AzureAD user you created within AD, not your generic Azure acct.
I was signed into "Account1", which was not part of my AzureAD...but it had a PowerBI subscription.
When I ran my webapp on localhost, it asked me to sign in to PowerBI via Oauth. So I signed in using [AzureAD member acct] "Account2". (or it just signed me in directly..probably to Account1)
It kept trying to use Account1 to authenticate...as the issue disappeared when I switched browsers and cleared cookies in the new browser. Occasionally I also
got the message "Request headers too long"....for the same dual account reason..same fix.

Functional Consultant Interview Questions

Hi,
Can anyone please send me some interview questions nad materials related.
Does anyone have questions that will cover a Functional Consultant Role.
Thanks a lot,
Murali
<removed>

Hi,
I can tell you about my experience in different process.
I usually have a first interview with the recruiter/agency this first interview is quite general, he usually review your CV, job history,... the recruiter ask you about your interest or motivation for that process, if you are willing to travel, reallocate, etc.. your salary expectations and your knowledge in the different modules. This is the easier interview and if everything is ok, the recruiter will tell you for next steps, probably about the project, the employer, etc...
In the second interview normally is with the consultancy company, with the manager and an experience consultant that usually asks about technical questions, they ask for example, how to setup a dual accounting process with SLA in GL, which reports you would use to reconcille AP/AR and GL, how many segments do you need to setup in GL for a specific business situation, how to load assest in FA, which are de accounting steps from buy goods until you account the AP invoices,...
In some cases you have also a final interview with customer just to get the final approval, but the really important one is the second interview.
Good Luck ;-)
xhuertax

Dual Accounts?

Similar Messages

Maybe you are looking for