Dual Adobe ID Issue

Hi guys,
I have two Adobe Id's attached to my Partnership. The only way I can get them to show up in Creative Cloud for both Id's is to manually add the second one as a user to that site. So I have to add myself to each site manually?

Actually I found an easy way to do it.
Just log into the PArtner Portal with the ID I want to add and go to each site in the clients list and use the  'Add Me To Site' link.

Similar Messages

  • Adobe TV Issues on Mac

    Hi
    I first asked this question in the Lounge (http://forums.adobe.com/message/3988002) and it was suggested that I try here.
    Sorry if this isn't the right location for this posting, but I couldn't see any specific section for Adobe TV issues.
    We seem to be having issues with Adobe TV on Macs where the video never loads.
    This has been tested with OS X 10.6 and 10.7 and using Firefox 4, 5, 6 and 7 and Safari 5.
    The video's load fine using PC's on our corporate network with Firefox so I know it isn't our proxy server configuration.
    The advert before the video will load and I get the countdown to when the video will start, but the video never does start and the time at the bottom left is always at 00:00.
    The only thing I can think of is that this is a permissions issue as our Mac users do need to enter proxy login credentials to get to the internet, but there is no pop-up login box or any other error message being displayed.
    I spotted this question http://forums.adobe.com/message/3113557#3113557 about someone who was having issues with AdobeTV on their iMac.
    I've tried changing the Flash settings, but this has made no difference.
    If anyone can help me figure out what's going on, I'd be very grateful.
    Matt

    Hi,
    Can you go to http://kb2.adobe.com/cps/155/tn_15507.html to check which version of flash player your browser is using on Mac.
    Your problem seems to be related with video. Are you able to see any youtube video on Mac?
    Would you mind send me the system profile of your mac machine?
    Thanks!

  • Adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly compo

    adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80070422.
    I have tried many things to try to install it and I have been unsucessful. Please help I have windows 8 64bit.

    This did not resolve my issue, it actually made things worse. I did what
    you had told me to do below, and it did not work. Tried to access the
    internet to respond back to you and my computer was not able to reach the
    internet. Tried reaching adobe support and not was able to, even tried
    calling was on the phone for 20 minutes and no one answered. I was not able
    to re install windows. Contacted Asus from another computer and they were
    not able to help me reinstall windows They had asked me to ship my computer
    back to them, due to them not being able to resolve the issue and help me
    reinstall windows. I luckily had a backup on my external hard drive and was
    able to reinstall windows 8. Spent over an hour and half trying to fix
    that. Here I am still not able to install adobe reader. I was very unhappy
    with what I was told to do and it gave me this issue.
    ·  Open an Administrator command prompt: Right-click Start > All Programs >
    Accessories > Command Prompt and select Run As Administrator. Click Allow
    for the elevation prompt
    ·  In the command prompt, type the command below:
    fsutil resource setautoreset true C:\
    The line above assumes that C: is the drive in which Vista is installed. If
    it is installed on another drive like D:, change the drive letter
    appropriately.
    ·  Restart the system.
    ·  Install Acrobat or Adobe Reader again.

  • Adobe player issue

    Enviroment: Windows 7 professional
    Tools: Adobe Connect , Office 2010 and Adobe Presenter
    Issue: Adobe connect prompts everytime to download Adobe player, although i downloaded it sucessfully. how do I overcome this situation?
    Flash Player 8.0.0.0 or above is required
    Adobe Acrobat Connect Pro requires the Flash Player browser plugin, version 8.0.0.0 or above. Please download and install the Flash Player to continue.
    Download Flash Player

    Just to be clear, I took your words to mean you are on the latest version of Safari, but are you also on the latest version of Flash? Go to System Preferences -> Flash Player and compare the version number to what is available to download for your computer on the Adobe Flash webpage. A few questions to consider: does the issue persist in other browsers? What model computer are you using specifically and are you equipped to handle the tasks you are looking to perform?

  • As a Realtor I can't access documents on our ARMLS web site, the tech support say it is an adobe reader issue?

    For some reason, suddenly I can't access the documents tab on our ARMLS web site. I called Tech support for the Flex web site and they say they can open the tab and read the docs fine.
    They are saying it is an Adobe issue on my computer. I un installed adobe and reloaded but the same result.
    Any ideas
    Thanks
    Craig

    Yes, I just changed my browser to Internet Explorer and same result, I
    still can not read any PDF documents loaded to this site.
    I have not tried un installing adobe but that is next, then reinstalling
    while in Explorer.
        As a Realtor I can't access documents on our ARMLS web site, the tech
    support say it is an adobe reader issue?  created by ~graffiti
    <https://forums.adobe.com/people/%7Egraffiti> in Adobe Reader - View the
    full discussion <https://forums.adobe.com/message/6830001#6830001>

  • Adobe Activation Issue - Offline

    Hi,
    Am unable to activate my adobe XI pro; am being requested for request codes; how do I access them, kindly assist.

    No I  have a serial number for CLP 5.0 license program-education
    acrobat professional 11.0 MLP AOO License F
    Chantal Kamdem
    Gestionnaire
    Centre de Recherches en Cancérologie de Toulouse
    UMR1037 INSERM-Université Toulouse III Paul Sabatier – ERL5294 CNRS
    Oncopole Entrée C
    2 avenue Hubert Curien
    CS 53717
    Batiment C, 1ème étage
    31037 TOULOUSE CEDEX 1
    [email protected]
    Tél : 05 82 74 15 88
    Le 05/12/2014 20:22, Sabian Zildjian a écrit :
    >
          Adobe Activation Issue - Offline
    created by Sabian Zildjian
    <https://forums.adobe.com/people/Sabian+Zildjian> in /Acrobat
    Installation & Update Issues/ - View the full discussion
    <https://forums.adobe.com/message/6989531#6989531>

  • Having problem downloading epub books onto mobile device (ipad & iphone) due to adobe server issue

    having problem downloading epub books onto mobile device (ipad & iphone) due to adobe server issue, please advise

    Hi Gautham
    Reference to your question, I'm not using Adobe Digital Edition to download and sync to my iPad.
    I am trying to download the epub book to my Overdrive app (which is authorize to download epub books) on my iPad to read.
    Reply from Overdrive mentioned that this is Adobe server issue.
    Any advise anyone??

  • Activation issues with dual Adobe ID's

    I have one adobe id based in the US Adobe store that holds all my point product licenses.
    I was forced due to living in New Zealand to have my cloud subscription via the NZ store and had to have a new id.
    All is fine except every time I open one of my point products - on next opening a cloud product im forced to reactivate ( it tells me im running in trial mode and i have to click on license this product)
    This is easy to do but quite frustrating - I am in the position where i have to open cs5 and earlier versions to help students and customers so its happening to me daily or more often and that seems unreasonable.
    Is there anything that can be done to fix this situation???

    OK, thanks for the clarification.
    I was wondering if this might be related to what you are experencing
    http://helpx.adobe.com/creative-cloud/kb/creative-cloud-trial-mode.html
    Is the lanuage preference set to English (International)?
    -Dave

  • Dual monitor color issue - oversaturated image in CS4

    Hi, I wonder if you can help. I found people having similar issues, but never seen an actual answer, so your input would be greatly appreciated.
    My set-up:
    MacBook Pro Dual Core intel based 15.4 2.6GHz running OS X 10.5.6 - also my primary display
    HP LP2475- secondary display
    CS4
    Both monitors were calibrated using X-rite Eye-one LT (each with a separate profile)
    I've tried calibrating each monitor 3 times and still get the proble,
    My problem:
    Running in dual monitor mode in bridge or safari/firefox- no problems at all: almost consistent colour between both monitors.
    When I open the images in Photoshop CS4, they look fine on my MacBook screen, but when I drag them over to the HP the color is grossly oversaturated - especially in the red. What am I doing wrong? (in fact on the HP monitor, the color looks perfect in bridge but super insanely saturated in CS4)
    Does anyone have a clue on how I can fix this?
    Thanks!

    You say your running 10.5.6?  Why haven't you updated to 10.5.8?
    FWIW, I never had color issues under 10.5.X, however I have since upgrade to 10.6.
    See the thread I started in which Adobe responded:
    http://forums.adobe.com/thread/483359

  • Another Dual Layer Break Issue

    Encore CS5.1
    After about 12 hours, I am no further forward... Having trawled through a number of posts on this and similar subjects I am really up against the buffers.
    The requirement is simple - getting Abobe Encore CS5.1 to "see" my request to use a Chapter Marker it gives me as one of three in the Manual Option section during the build process.
    I had no issues with DL authoring in CS4, but CS5 is giving me a lot of grief.
    The outline:
    I have a timeline of 67 minutes with 6 Chapter Markers. The first two are within the first 10 minutes, CH3 at 36 minutes, CH4 at 38 minutes, CH5 at 41 minutes and CH6 at 61 minutes.
    I am using Verbatum DL +R DVDs (I have used no other these last three years) with a write speed of x4 or x2.4.
    Once I have built the NEW project, imported the video and placed the Chapters as above (all except CH3 at fade-to-black points) I select 8.54 GB dual layer, Side one, Manual and proceed.
    At the invitation to select the manual point Encore offers me CH3, CH4 and CH5. No matter what I select, it places the break point at about 33 minutes (about half way) and in doing so screws up my own Chapters by placing it's own (invisible in the timeline) chapter thereby shuffling all mine. As a result I lose sections or get repeated sections.
    I tried building to Folders and using ImgBurn. This confirms the insistance on using a halfway point - same too building to an Image the chapter and cell are never my selected, always a cell at about the halway point.
    Adobe Encore is not recognising my selection (at its own invitation).
    I have deleted the project and cache - rebooted and built the project from scratch importing the video - creating the timeline and adding the Chapters - always the same.
    I have followed some of the points given using Folders in ImgBurn - it simply is not working for me. It's almost like Encore is screwing the build and the build is the same as though the settings are held in cache.
    As mentioned, I have cleared all previous builds and their files and deleted the media cache with no joy.
    I'm getting to the point whereby the only choice left to me is to split the project timeline and build the project as two separate DVDs (as the timeline is only just over the capacity for a single sided DVD (3 minutes).
    As for PCG Edit - doesn't seem to want to run on my workstation (PC i7 24GB RAM - 3 separate drives in RAID combo and separate OS SSD).
    Can someone help me find out what has happened to Encore as it does appear that after every "upgrade" somthing gets a little worse judging by my CS4 experience.
    Many Thanks

    Hi Stan,
    Many thanks...
    Yes, running "as admin"
    Not quite with you "...too much material for a layer."
    I often run to about 65 mins to just fit a single layer - perfect, but this project ran over - and I can't take anything out.
    I am loath to change the sample rate as my SD quality (from a combo of AVCHD and MPEG2) Sony NX5 and Z5 really hit the spot for max res in SD (9.4 Mb/s). The Encoded spec for Encore is legal (or so it would seem) for Encore in a single layer (no issues or errored DVDs), and as I said in the OP I had no issues like this in CS4 (yes, apart from the known buggy stuff).
    But why would Encore offer me a number of break points in placed chapters only to ignore them consistantly?
    Another point:
    My first build went through and honoured the chapters, but put the layer change halfway - but didn't screw the build. There was a production reason I had to change the timeline content - one shot change of the same duration. I would certainly settle for that at this stage. Interestingly, I built to Image and did an IMGBurn (as I do do for all DLs). But as you say, IMGBurn is choking on what's been passed to it from Encore. I am trying to replicate that first build.
    By the way, all my Chapters in the timeline preview perfectly in Encore - it's just when I ask for the build it all goes wrong (seemingly).
    Many thanks again Stan. Appreciate your reply.

  • Adobe CS issues on MacBook Pro

    I am unable to open my Adobe Reader 7.0 (crashes upon opening) and am not able to have more than one of the CS2 applications open at the same time without one of them crashing. Anyone else run into this issue? Is this a mac issue or an adobe one? please advise.
    Thanks

    I am having the same problem.... It's driving me crazy No Acrobat and only able to use one program at a time out of the suite. If you find out what's wrong... I NEED TO KNOW/___sbsstatic___/migration-images/migration-img-not-avail.png

  • Mini Displayport to Dual-Link DVI Issues on 30" Cinema Display

    I know this problem has been around for a while, and that there are several other discussion on it, but my goal here is to point out that even in mid-2011, this issue remains.
    Here's my configuration:
    30" Cinema Display
    Dual-link MDP to DVI adapter with 1.03 firmware (purchased August 2011 from an Apple Store)
    New-ish MacBook Pro (purchased December 2010) with Mini Displayport
    Symptoms:
    On dark areas of the screen, DVI noise appears (horizontal flickers of light coming and going at random)
    Attempted Fixes:
    Unplugging the display and plugging it back in to the computer (failed)
    Restarting the computer (failed)
    Tightening the connections on the Dual-Link DVI adapter (failed)
    Sleeping the display and awaking it (failed)
    Some suggest getting a new 27" Cinema Display with native Mini Displayport/Thunderbolt support. I actually have one, but I cannot tolerate the glare on the glossy displays, so I'm "downgrading" to a 30" Cinema Display.
    Is there any remaining hope for this issue?

    I still cannot understand why you would return everything... Ultimately you want this computer right? Once the bugs on the adapter are fixed are you gonna go back and re-buy it?
    Seems like a lot of time spent out of spite and not for good reason. Me, this is the best Mac I've ever owned (and I've owned many. no, really.) and I'm happy to wait for this adapter w/ this machine in stead of going back to my other box.
    I observed a similar client of mine w/ an iPhone... after the first week, he didn't like the keyboard and a few other things, so he took it back and went back to using his Blackberry -only to dump the Blackberry again for the iPhone, because he realized that the iPhone still did more things better than the Blackberry.
    J.

  • Adobe Connect issues with Windows 7

    Has anyone found a solution to the problems Adobe Connect has with Windows 7?

    Sounds like something is blocking network traffic. I'm not aware of any Windows 7 specific issues. I've used Windows 7 with connect for 2 years with no Windows specific issues.
    I'd call support at 800-945-9120 and see if they can indentify the issue and give you a resolution.

  • Adobe Activation Issue on Windows 7

    I am trying to run Adobe Photoshop CS2 on Windows 7.  I ran the install .exe file in compatibility mode and run the photoshop.exe file in compatibility mode as well.  After the installation is complete, I can open Imageready with no issue, but cannot use any of the features since CS2 is not activated.  When I try to open Photoshop I receive the following error:
    Adobe Activation
    Sorry, a serious error has been detected.  To continue using Adobe Photoshop, please reinstall the application. 
    I have gone as far as uninstalling all of my Adobe products and removing the user preferences and then installing CS2 first, to no avail.  I would like to activate my product but the window to allow me will never open. 
    Thank you in advance for your help!

    tait0007 wrote:
    I believe I am running with sufficient admin previleges
    Given your wording, I'm not sure you understand that UAC causes you to run applications without privileges, even though your account may be a member of the Administrators group.
    Have you tried running Photoshop "As Administrator"?
    Also, it seems to me Marian Driscoll has been saying that one of the versions of Photoshop - possibly Photoshop CS2 - might need to be installed with a forced short folder name.  Maybe she'll respond on here and confirm that.
    -Noel

  • Powermac G5 dual 2.5 issues!

    I purchased a pre-owned Powermac G5 Dual 2.5 ghz. It has 4gb ram and is running Mac OSX 10.5.8. Very shortly after I purchased the computer I had a crash and couldn't get it to start back up. I tried to re-install software and it would go part of the way thru and crash on the install every time. I started the machine in target mode and hooked it to my old trusty G4. I was able to install the software that way with no issues. I then went back to the G5 and tried installing updates, but part of the way thru the updates it would crash saying the update was possibly corrupt, ( these were straight from apple so I doubt that ) thus leaving my g5 unable to restart because of the partial software update. I did the target mode again, this time installing all of the updates using my G4. After all was said and done, I was back to where i had started when i bought it. I now keep to be getting freeze issue with the machine. I can be online using safari and all of a sudden I get the spinning color wheel. When this happens I can not even force quit the app, it will just sit there spinning away. Tonight i tried opening firefox and it started up and ran for a few minutes before freezing also. A few days ago I had tried to burn a dvd using toast, and that app also froze up and would not let me force quit. I have not had any issues like this from my G4, and after trying resetting the SMU, PRAM and many many hard restarts, I am no closer to knowing what the issue could be. Any help or ideas for me to try would be much appreciated.  Thanks, Mike

    Have you blown the dust out of it since you got it?
    Possibly a temperature problem or bad RAM/RAM slots.
    Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    iStat Menus...
    http://bjango.com/mac/istatmenus/
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    If you have any temps in the 70°C/160°F range, that's likely it.
    The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
    Memtest OS X...
    http://www.memtestosx.org/joomla/index.php
    Rember is a freeware GUI for the memtest ...
    http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html

Maybe you are looking for