Dual boot mac and linux

Hi,
I am trying to install linux to my MacPro to run both mac and linux operating system. However, I have no clue that how to do that. Could you please give me a help in detail how to do it.
Thank you so much,
Xiao

There are detailed instructions for various methods of installing Ubuntu on your machine here:
https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation

Similar Messages

  • Dual boot Windows and Linux?

    I recently bought a T61, and will be taking a programming course.  One prof I spoke with said they ask us to use Unix tools, so one option is to dual boot linux and Windows.  I haven't decided yet whether I will keep Windows Ultimate, or go to XP for this.  But I was wondering how easy/hard is it to make this work, and what kind of steps need to be taken?   If you could point me towards any good tutorials/guides that would be appreciated too.
    Also, I have never really used linux, so which version is best?  I will be needing it for programming, but also still want to do the basics like web surfing, music, dvd's, burning discs, etc.  I have an old copy of Ubuntu that I never used, but its probably about 4 years old.  Is this still acceptable or will I need something newer?
    Message Edited by amace on 05-29-2008 01:28 PM
    T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

    Hi,
    If it's just a couple of programming courses that you are going to take I suggest you'd try out VMware player:
    http://www.vmware.com/products/player/
    You can get this software for free and since your system packs a lot of punch it will be able to run it smoothly without any hassle. I'm an engineering grad student and I have to do alot of programming. I've used VMware player before to do some software developement in Ubuntu when I didn't have enough HD to install dual boot but still couldn't do all my other stuff without XP.
    VMware Ubuntu will need a bit of fiddling to get it work just right (USB devices, etc) but it shouldn't be harder than installing a dual boot (actually it is alot easier for my opinion). The only down side is that file sharing between VMware and Windows can be somewhat difficult. I used an external USB drive to share my files but you could always set up Samba to handle file sharing.
    I hope this helps out with your decision.

  • Dual booting S540 and linux with Secure Boot?

    At some point I intend to install archlinux with dual boot on my Thinkpad S540 which currently runs Windows 8.1.
    All the current advice about dual boot on UEFI machines seems to indicate that the way to go is to disable Secure Boot (and Fastboot) for Windows, and then do the linux install choosing a linux bootloader to allow booting either O/S. I believe I know the steps needed to do that.
    Does anyone have any experience with dual booting Windows 8.1 and ArchLinux on the S540?  I would like to retain Secure Boot for Windows, and in the ideal world have Secure Boot running for ArchLinux also. However Secure Boot is fraught with problems for Linux. There are a few distributions such as Ubuntu which will in principle support Secure Boot but I only use ArchLinux and want to install that particular flavour of linux on my machine. It is of course possible to keep switching Secure Boot on and off in the BIOS before booting either of the two installed operating systems but it would be neater and cleaner to have it all with Secure Boot on, or all with it off.
    This is all very new stuff so there may well be a lot of problems, but it is worth exploring. I use rEFInd as my bootloader on another UEFI desktop computer to boot ArchLinux so I am familiar with that bootloader, but dual boot is another thing, and Secure Boot with the fast moving developments in that area is something that until now very few people have tinkered with.
    Any replies and guidance/suggestions appreciated.

    I'm guessing /boot can run from ntfs, however probably not as efficiently as if it were running on ext3/4. Mine runs on Ext4.
    To add confusion, you only create one Extended partition, all partitions you create within the Extended partition are called Logical partitions. You should be able to create enough Logical partitions for your needs.
    Primary/Extended partitions are normally sda1-4 and Logical partitions will usually start from sda5 on modern Sata HDD systems.
    For /boot I would create a small 100mb Ext4 Logical partition. This partition cannot be inside LVM nor encrypted when using Grub1.  I'm not familiar with Grub2.

  • Dual booting(Win98 and Linux)

    Hi! All
    I successfully installed oracle Ent 8.16 on the red hat linux 6.2.However,when I reboot my computer, it doesn't show me the booting option that I can choose the one of operating systems either Win98 or Linux. Here is partition information;
    C: Active Win98 Primary
    D: Linux Ex2 Logical
    Linux Swap
    (I made this partition using Partition Magic 5.0)
    Has anybody successfully installed both Linux and Win 98 on the one local machine using Partiton Magic or Fdisk? please HELP ME!!!!!
    Regsrds JC
    null

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by jc:
    Hi! All
    I successfully installed oracle Ent 8.16 on the red hat linux 6.2.However,when I reboot my computer, it doesn't show me the booting option that I can choose the one of operating systems either Win98 or Linux. Here is partition information;
    C: Active Win98 Primary
    D: Linux Ex2 Logical
    Linux Swap
    (I made this partition using Partition Magic 5.0)
    Has anybody successfully installed both Linux and Win 98 on the one local machine using Partiton Magic or Fdisk? please HELP ME!!!!!
    Regsrds JC<HR></BLOCKQUOTE>
    Dear JC,
    My system is running on dual boot with Windows 98 and RHL 6.2 using fdisk. The art is to make Linux the active partition while partitioning. Also modify the file /etc/lilo.conf and increase the delay period to say 60 seconds. This will make the propmt 'LILO boot' wait for 60 secs before booting from the default active partition.
    Let me know if it worked for you.
    All the best.
    Ruchita
    null

  • T61p - dual boot Vista and Linux

    Recently I purchased the T61p with Windows Vistra Ultimate pre-installed. It all works well, apart from Vista being slow of course...
    I understand that Lenovo have certified Novell's SuSE Linux for the T61p, and I am considering making the laptop Dual boot - Vista/Linux.
    Does anybody have experience with this? (1) how do I get the certified Linux and (2) any tips on making this work?
    Thanks in advance for yr replies
    Anton (Rotterdam, NL)

    I'm dual-booting XP Pro and Vista Business x64 on a T61, and they both work fine. I also left a partition available to install Linux at some time in the future.
    I built a test box (not a ThinkPad) at work that runs Windows XP Pro, XP Pro x64, Windows 2003 x64 Server, Vista Business, and Fedora Linux, and they all work.
    The key is always install in this order - 95>98>2000>XP>Server>Vista>Linux.
    If you partition the drive and install Linux I don't see any problems.
    ThinkPad T61 15 Widescreen with nVidia Quadro graphics 6459CTO
    Windows 7 Enterprise and Windows XP Pro

  • How can I dual-boot Mac OSX and Linux Mint?

    Hey guys, I was wondering if it is possible to dual-boot both OS's similar to OS X and Windows 7/8...but first I'm wondering if it will void my MacBook Air Warranty (w/ AppleCare) as ultimately it wouldn't be worth it then!
    Thanks!
    -Stu

    Which CD are you trying to use?
    Mac OS X 10.4 (Tiger) originally came on DVD.
    A media exchange program initially was available:
    http://images.apple.com/macosx/pdf/TigerMediaExchangeFormv5.pdf
    So maybe you did an exchange for CDs?
    You may find this article helpful:
    http://weblog.techdad.net/2006/11/12/dual-boot-mac-osx-and-ubuntu/

  • Dual boot Mac OS X and Arch: Arch installer cannot find CD drive?

    Hi, everyone!  A friend convinced me to install Arch about a month ago on my desktop and I've loved it so much that I want to dual boot Mac OS X and Arch on my Macbook Pro 7.1.
    So I have a Macbook Pro 7.1.  I have partitioned the drive in Mac OS X and installed rEFIt.  I have the Arch x86_64 disk which I know works because I installed Arch on another computer. 
    When I boot from CD I get the familiar Arch screen with options "Boot Arch Linux, existing OS... etc."  I click boot Arch, and it starts to load.  However, it says "Waiting 30 seconds for device /dev/disk/by-label/ARCH_201005 ... ERROR: boot device didn't show up after 30 seconds... Falling back to interactive prompt.  /bin/sh: can't access tty; job control turned off."
    After searching around the forums, some people said they had similar problems attempting to install via USB.  I used "cat /proc/scsi/scsi" and my CD drive does not show up in ramfs.. What can I do to install this amazing OS on my MB Pro 7.1?
    Thank you for your time!

    Solved!  sledgehammer and MrE (sorry, I can't spell it) in IRC helped me out.  I had to download a newer iso that offers better Mac hardware support.  2010-12 iso

  • [SOS]Which mac mini device can install dual boot(Lion and Mt Lion)?

    Salutations!
    Due to my assignment, I need to get mac mini device which support dual boot.
    Which mac mini device model/firmware can we install dual boot(Lion and Mt Lion) on it?
    I got late 2012 one, but it looks like it does not support.
    Please help me.
    Thank you so much,
    TriQuang

    Hi Niel,
    Thank you for your fast reply. So if I buy mac mini MC815 model, which comes with preinstalled Lion I can run dual boot(Lion and Mt Lion)?
    I have one more question: Can I install Mac OS 10.6 on that mini device? If it's not supported which mac mini model can I get to support Snow Leopard and Lion and Mt Lion?
    Thanks and best regards,
    TriQuang

  • Can't get windows 8.1 with dual boot for fedora (linux) . system is UEFI .

    Can't get  windows 8.1 with  dual boot for fedora (linux) . system is UEFI .

    Hi,
    Any update here?
    We may seek help at Fedora forum as Milos suggested, if convenient we could share the related thread link here for reference.
    In addition, please also check the information in the similar thread:
    Dual Boot Windows 8 and Linux?
    Best regards
    Michael Shao
    TechNet Community Support

  • Dual Booting Windows and Solaris

    Hi
    how do i dual boot windows and solaris
    Do i install windows first and then solaris or do it the other way around..?
    how do i make sure that Windows and Solaris appear in my boot options..?
    Is their a guide on doing this...?
    Thanks
    Liam

    Hey I did a quick google search for you. So I havent tried this method myself but it sounds reasonable.
    The text below is from the following link:
    http://www.hccfl.edu/pollock/AUnix1/DualBoot.htm
    "Solaris boot loader
    Partition the drive to leave at least 2GB of space available for Solaris;
    more drive space is desirable.
    As with Linux, install Windows first then Solaris.
    Do not use the Installation CD but boot and install
    from Software CD 1.
    If you accept the default partitioning scheme which
    the installer provides you will soon run out of space in
    your / and /usr partitions since only enough space is
    allocated to install the system.
    All extra space is allocated to /export/home.
    A typical installation on a 4.5GB partition might look
    something like this:
    Filesystem Size Used Avail Use% Mounted on
    /dev/dsk/c0d0s0 900M 536M 310M 64% /
    /dev/dsk/c0d0s1 334M 109M 192M 36% /var
    swap 671M 8.0k 671M 1% /var/run
    swap 671M 8.0k 671M 1% /tmp
    /dev/dsk/c0d0s5 845M 222M 565M 29% /opt
    # (FAT32 partition):
    /dev/dsk/c0d0p0:1 5.0G 3.3G 1.6G 66% /c
    /dev/dsk/c0d0s7 1.1G 92M 954M 9% /export/home
    /dev/dsk/c0d0s4 752M 225M 474M 33% /usr/local
    The Solaris boot selector enables you to choose either
    Solaris or Windows with Solaris as the default.
    (I prefer grub or lilo!)
    To mount FAT under Solaris:
    # mount -F pcfs /dev/dsk/c0d0p0:c /dos (or �:1�?)
    And the vfstab file:
    /dev/dsk/c0d0p0:c - /dos pcfs - yes -
    To create a GRUB boot floppy, follow these steps:
    $ mkfs -t ext2 /dev/fd0
    $ mount /dev/fd0 /mnt/fd0
    $ mkdir /mnt/fd0/boot /mnt/fd0/boot/grub
    $ cp /boot/grub/stage[12] /boot/grub/grub.conf \
    > /mnt/fd0/boot/grub
    $ /sbin/grub --batch <
    Hope this helps!
    /Oscar

  • [Success] Dual Booting Arch and Windows 7 [Advice / Confirmation]

    So I have been trying to get Starcraft II to work with wine and no luck.
    I have decided to install windows back on my computer, besides it might come in handy since I'm heading back to school soon.
    Anyways I have tried dual booting arch and windows in the past, and my results have never been stable.
    Today I will try using the program gparted.
    Let me give you my thoughts on how I plan to go through this and please give me some advice so I don't loose everything I have worked for on my linux box
    1.Currently I have two hard drives, one for all my main programs and one for my media files (mounting usb, dvd, etc, and it actually has no files in it xD).
       I plan to use gparted to re-size my second harddrive (media drive), create an extended partition, and a logical ntfs partition within it.
    2.I pop in my windows cd that I recieved with my laptop and install it on the space I have partitioned for windows.
    3. If my grub gets wiped out my windows (which I hope it doesn't not sure how the MBR stuff works) I insert a Ubuntu live cd and do
    sudo grub
    > root (hd0,0)
    > setup (hd0)
    > exit
    4.Configure grub to boot windows 7.
    5.Be happy with no headache.
    SO....
    If someone with past experience with dual booting windows and arch could please give me some advice, as I do not want to lose all my data, start over, and have another headache.
    I know I must learn to backup arch, which I will before september.
    But if anyone has any protips, or sees a flaw in my plan please point it out!!!
    Thank you very much for taking the time to read this and even more if advice has been given to boost my confidence!
    For now I will wait
    Thank you fellow archies.
    Last edited by Jabrick (2011-07-03 01:29:36)

    satanselbow wrote:
    1) Windows must be installed to a primary partition - attempting to install it to an logical partition will result in an epic fail
    2) Physically disconnect the harddrive you do not want windows on as windows typically installs the bootloader on the 1st hardisk (ie /sda) regardless of installation drive (ie /sdb)
    3 / 4) Complete the windows installation then reattached your Arch drive and edit /boot/grub/menu.lst (as root) pointing the W7 entry to (hd1,0) - no need to reinstall grub
    5) Hey it's windows - anything could happen
    If you create an NTFS partition right at the beginning of the the drive before you start the W7 install you can prevent it greedily using up 2 of you 4 primary partitions - I would also completely update you new W7 installation past SP1 before reattaching the other drive to further prevent W7 going mental
    satanselbow thank you so much!
    Everything works great I had no stumbles, and I hope no problems in the future!!
    I will post exactly what I did in case someone has the same issue.
    1. Partition you're secondary harddrive as primary ntfs with gparted
    2. Reboot, and if you get a file system check error, check you're udev rules. (For my case in particular I had to change the udev rules I got for auto mounting usb, ext harddrive, etc.
    3.Power off your computer and physically remove the harddrive that contains all your linux goodies
    4. Plug in your windows cd and install in the partition you created
    5. Update your windows OS
    6. Plug in Ubuntu live CD and reboot
    7. Use commands to get grub to overwrite the windows boot loader (In my case I put grub everyone hd0,0 hd0,1 just to be sure, but you might want to do things cleaner)
    8. Reboot and see if grub loads up
    9. Use Ubuntu live CD again and launch Gparted, select the boot to your extra linux space (if you had one, not sure if this is needed)
    10. Plug in your linux harddrive and reconfigure /boot/grub/menu.lst and your good to go
    Once again shout outs to satanselbow!!! For without him I might've failed brutally!
    Cheers!

  • Dual Boot Vista and Arch

    Hey, I am attempting to set up my laptop to dual boot Windows Vista and Arch Linux.
    The problem I'm having is after installing Arch my laptop still boots windows w/o going to the grub
    I started with having Windows Vista installed on the laptop, and then shrank down the partition with vista by 30 gigs for Arch.
    I was following the Arch setup guide in the wiki along with the Dual Boot Windows and Arch guide in the wiki [wiki]Windows_and_Arch_Dual_Boot[/wiki].
    My partitioning Scheme is:
    /dev/sda1    1.46 gb (some sort of toshiba recovery partition I believe)
    /dev/sda2    117.8 gb (Vista Partition)
    /dev/sda3    1 gb (Swap partition)
    /dev/sda4    29 gb /root partition
    According to the Dual Boot wiki article, I should install the grub to /boot, which in my case is in /root which I did.
    The thing that confuses me about this is if I install the grub to /boot how do I get the grub to boot before the windows MBR?
    Thanks in advanced

    Mclarenf1905 wrote:
    Hey, I am attempting to set up my laptop to dual boot Windows Vista and Arch Linux.
    The problem I'm having is after installing Arch my laptop still boots windows w/o going to the grub
    I started with having Windows Vista installed on the laptop, and then shrank down the partition with vista by 30 gigs for Arch.
    I was following the Arch setup guide in the wiki along with the Dual Boot Windows and Arch guide in the wiki [wiki]Windows_and_Arch_Dual_Boot[/wiki].
    My partitioning Scheme is:
    /dev/sda1    1.46 gb (some sort of toshiba recovery partition I believe)
    /dev/sda2    117.8 gb (Vista Partition)
    /dev/sda3    1 gb (Swap partition)
    /dev/sda4    29 gb /root partition
    According to the Dual Boot wiki article, I should install the grub to /boot, which in my case is in /root which I did.
    The thing that confuses me about this is if I install the grub to /boot how do I get the grub to boot before the windows MBR?
    Thanks in advanced
    It still works fine. It doesn't matter if its not in root directory. Others linux OSes  have their bootloaders in the same directory and it manages to boot just fine.

  • Simple network: Windows 7 file server & several Macs and Linux machines- SAMBA bombing out?

    Hi guys, i know this is really more of a windows support question, but here goes:
    Windows 7 Ultimate 64bit acting as a file server, turned off all the usual MS authentication stuff so Macs and Linux systems connect with password without issues..
    except when i start copying certain files/file types/names to the system, it will break the network connection, then refuse any more connections, all macs and linux machines on the network are booted, from the PC however i can still access the Macs shares volumes.. (the macs still see the windows machine & pinging is still there, but if i try to connect i get 'check the name/ip address' error
    im no expert, but its as if the Samba service on the windows machine gets killed and im not sure what to do to get it to re-connect other then restarting the system, but as the system is also a terminal server users always have apps/documents open and its 'never a good time' to do it..
    if there was an alternate Samba to install, or a buffer patch, or even a 'goto this service, stop and restart' etc.
    Trying to get help from the 'windows' community comes down to 'well your on a mac what do expect etc etc' *sigh*
    any help is appreciated
    Richard

    Hi, just thought id update my finding regarding this, and it maybe directly affected by my only system, but in case anyone else has this issue?
    I thought it may be due to the file name thats causing the lockups, but I found while trying to backup my collection of install images and updates that sure enough a simple named file 'osx10.6.3.DMG' going to the server, 850MB in it stalls and fails, now im not able to connect.
    but form the PC, without changing the name or location etc, i copied the SAME from the Macs hard drive through to the windows system, all 5.7GB.
    so it is something to do with my windows 7 system, but maybe more related to the size of the file then the name or non-standard characters as first thought.
    as suggested by Grant above i will check on the server boards as well.
    thanks

  • P35 Neo2 BIOS Settings to run Dual Boot SATA and IDE HD's

    Hi,
    I was having intermittent problems with a Gigeabyte so upgraded M/B.
    I have an IDE "caddy" with 2 Dual boot HD's (Linux Grub booting XP on sda1 and Fedora9 on sda2), and had no problems with either HD's on old M/B.
    The old M/B also had  SATA sockets which I installed a 250GB drive as my main setup.  Dual boot again with same setup.  I set the SATA to "auto" and it detected and ran when no IDE caddy was inserted.
    Everything ran OK but I had very intermittent CRC failures that I could not isolate, so I upgrade 2 days ago.
    Without inserting any IDE drives I can boot the SATA drive OK into Linux OK  (it also detects an ext3 partition on a seperate /backup partition so the IDE interface works).
    If I now try and boot the XP on my SATA drive,  I get the dreaded blue screen. 
    I assume this is due to me having XP installed without the AHCI support as detailed in other (long) thread showing how to overcome this problem!?
    I would also like to know if and I can just boot from my IDE drive (with no SATA's connected),   because even though it seems to detect the PATA HD OK,  I cannot get it to boot from either of them!  I know these HD's have not changed as I have checked both of them on the SATA OS and both Logical volumes are still there and the relevant boot flags are both set.
    Even though I have a bit of a complex setup,  this may well be a very simple case of BIOS settings (sorry).
    FYI:
    I have a A7345 IMS V1.8 012408 BIOS and my two IDE drives are both dual boot with XP on the first partition.
    Both Linux partitions are formatted using Logical Volume Management  (LVM).
    Thanks for your time
    Any help/pointers would be appreciated as I am not absolutely sure that the M/B is functional or not.
       

    Thanks for the info,  I am now a bit clearer as to what is happening!
    I removed known good IDE HD from caddie and put it directly on the IDE cable (after removing the old non LVM linux IDE disk that was on it).
    The newly connected HD was initialized OK and I can see both SAT and IDE disks listed with F11.
    On trying to boot from the IDE,  it starts up and decompresses the image,  BUT cannot seem to find the LVM Volume group 03 (which is where my /boot partition is located).
    It then gives in and after a while,  boots back to the SATA OK (where the bootloader is also inside the LVM so I can't see why the LVM IDE disk is a problem but the LVM SATA boots OK).
    I do remember (late last night) trying with just IDE drive and of course it just hung because it did not have any alternative to boot!
    Any other observations/suggestions?
    Apologies its late here and I will not be back for a few hours!
    Regards

  • Dual boot mac mac

    i want to dual boot leopard and snow leopard... or just snow leopard and snow leopard.. can this be done? how?
    i currently have snow leopard dual boot with windows 7, but for testing purposes i want o install two mac os, if possible two snow leopard.. can this be done? can someone tell me how?

    Use the Disk Utility in the /Applications/Utilities/ folder to create a blank partition of the desired size, and install the OS onto it normally. Your computer needs to be able to boot to that OS.
    (57060)

Maybe you are looking for