Dual boot of Solaris 10

Hi,
I am new to Unix world , Can I install Solaris 10 with Dual boot support. I have to keep Windows XP as well as Solaris.
And my second question is that Solaris 10 is the Desktop OS or Server OS ? And what is the difference between SunOS 5.2 and Solaris 10.
Amir Hussain
Thanx in Advance.

Yes, I have Solaris 10 x86 (03/05) running along with
Windows XP on a Dell Optiplex GX280. I loaded XP
first, created a partition for the Solaris install
and then loaded Solaris. The Solaris boot loader
comes up at power up so that you can select Solaris
or XP. I am using Solaris 10 on both servers and
destops. I am not experienced enough to tell you the
difference between SunOS 5.2 and Solaris 10. Sorry.Thanks Daniel,
Its mean First of all I have to install xp, then create a partition for solaris 10. Then install solaris 10.
I have IBM compatible PC.
I

Similar Messages

  • Dual boot with Solaris 8.0 and Windows 98

    I am interested in Setting up my pc with with a Dual boot of Solaris 8 and Windows 98. I have a 60 GB hard drive that I am going to make two 30 GB primary Partitions on this hard dive. One with Windows 98 and one with Solaris 8 Intel Platform version. The question that I have, Is this particular Setup doable? And if so can you tell me what order they have to be installed and what partition software I should use for this procedure. Also if i missing procedure please be very detailed in explaining this to me. I read the message board was confused.
    If need be please email me at [email protected]

    Hey, goto http://math.uwb.edu.pl/~mariusz/dualboot/ and that will answer all your dual boot questions ?
    i2l2

  • Dual booting between Solaris 8 and 10

    Hi,
    We mostly use Solaris 8 for testing which means I can't uninstall it. How would I be able to dual boot both Solaris 8 and 10 on a SUN SPARC machine? Is there a boot loader available like grub?
    Please help.
    Thanks alot!
    Till later,
    Joseph.

    SPARC doesn't need a split boot loader like BIOS/x86. The OBP can directly load from any slice. So 'boot disk:a' would boot from slice 0 and 'boot disk:g' would boot from slice 6.
    Darren

  • Dual boot (x86) Solaris 9 with Win Xp/ NT

    Hello!
    I wanted to have Solaris as well as any other OS. The problem is that according to the mutliboot guide provided by SUN, first I install Win Xp, and then Solaris. But during the installation, Solaris demands the entire disk to be used, while I go for the "default disk layout". I can't figure out how to specify a particular amount of disk space for solaris through FDISK. Maybe, i don;t know the layout to be followed. This is because if I make a solaris partition, it does not install on it....

    Well I run WindowsXP and Solaris on the same box.
    Cant understand whats the problem with it, so let me just describe the way I did it. (btw installation guid was not so helpful)
    So at the point when you have to choose HD to install at, I think question before it was what sort of installation type you want (Default or Custom) Default will just use hole HD, while Custom will ask extra questions, conserning HD, partitions and so on. Just choose the right one, make sure that you devide space for Solaris in a way you need it rather then what just stands there (like more space for OS rather then private space and so on..)
    Then finish install and thats it.
    Hope it will help.

  • Solaris 10 dual boot hangs on

    I have a hp pavillion 6000 which I am trying to dual boot with solaris 10 x86. I partitioned my hard drive using systemresourcecd and formated with linux swap. when I try to boot off of my solaris 10 dvd, it hangs. It comes up wiht the copyright information, and doesnt change. help!

    Hi
    It is very easy to install Solaris with Windows XP dual boot if you have correct concepts of Operating System.Whch verison of Solaris are u trying to install. if you are installing Solaris 10 1/06 then there is a grub boot loader which comes with Soalris 10 .also u will first get the selection screen during first boot. if u r directly booting into windows then go to command prompt of windows adn type fdisk. then make the partition of solaris as active and then boot , now u will be able to boot with soalris/windows.
    Best Regards
    [email protected]

  • New to Solaris - dual boot question

    I have been using OpenSolaris on my ThinkPad T400s, dual booting with Windows 7. I want to give Solaris 10 a try. I've had it running in Virtual Box under OS X for a while, and I think I'm comfortable enough to try it out on my ThinkPad. Here is my question: will the Solaris Interactive installer let me install Solaris 10 in my existing OpenSolaris partition? And if it does, will it modify the bootloader so that I can still dual boot with Windows 7? I dont want to have to destroy partitions and re-install Windows. Once its on my hard drive, I can add myself as a user, install the Intel 5300 wireless driver, etc... Anyone have any other issues with Solaris 10 on a T400s?

    Okay, well as usually happens, when I resort to help I end up solving my own problem.
    In this case however, I still don't have a good grasp of what is going on.
    I deleted the partition table with sgdisk --zap-all /dev/sda and then used gdisk to recreate it, specifically setting the code for /dev/sda1 to ef00.
    I then reformatted the FAT partition, leaving the other one alone. After mounting /dev/sda1 to /boot and reinstalling linux and grub, I ran:
    grub-install --target=x86_64-efi --efi-directory=$esp --bootloader-id=arch_grub --recheck
    as described in the wiki, and
    grub-mkconfig -o /boot/grub/grub.cfg
    And it worked, including automatically detecting Windows on the other drive. Not sure what went wrong the first time but I'm glad to get it working.
    Last edited by egan (2014-12-09 19:46:58)

  • How do I install dual-boot Solaris 8 and Solaris 9 on one hard disk ?

    I tried to install Solaris 8 and Solaris 9 on same disk using CDs, but
    the second installation overwrote the first Solaris which was installed
    previoudly on the half-disk size partition of same disk.
    How do I install two Solarises on one hard disk ?
    Thanks
    Yakov

    There are no tricks to get Solaris to dual boot on the same drive. Just allocate and pick the free slices not used by the first Solaris install when you put in the second install. Technically speaking there is nothing preventing you from running seven separately bootable Solaris instances on the same drive (one of 8 available slices is overlap -- slice 2) provided you use a swap file on a root partition instead of reserving a whole slice for swap.

  • Dual boot windows 7 and solaris 11

    Hi Friends,
    Could some one please explain the steps to install dual boot windows 7 and solaris 11?
    Thanks
    Raja

    Install Windows leaving a partition for Solaris.  Install Solaris into the empty partition.  Reboot.  Use a partition manager if you need to shrink your current Windows Partition.  GParted works great and is free.
    alan

  • Dual Boot Windows 7 and solaris 10

    Can some body guide me how to dual boot windows 7 and solaris 10?
    Thanks

    First partition your harddisk with at least 2 primary partitions, one for windows and the other for solaris if you only have one harddisk. It would be a good idea to create an additional small boot partition as the first partition as well if you intend on using an independent boot loader but it really depends on what your machine is capable of. For example, if you have multiple harddisk and your BIOS supports it, then you could just install each OS onto its own harddisk and use the BIOS function to disable/boot off specific harddisk. Otherwise, if you only have one harddisk and created multiple partitions, install windows7 first followed by solaris10, obviously installing into different partitions. If you have created a boot partition, then you can install the boot loader into that dedicated partition.

  • Dual boot Solaris 8 and Windows XP

    Hello. I currently have windows xp as my OS. I would like to install Solaris 8 as a secondary OS. I have a separate hard drive I would like to put Solaris on. My question is, will the solaris installation allow me to choose which drive to install solaris to? Also, how can I set up my system to boot windows if I do nothing, but boot solaris if I choose to? Thanks for any help, I'm new to solaris and to dual-booting.

    Try this URL:
    http://sun.pmbc.com/faq/9.html
    Hope it helps.
    Senthilkumar
    Developer Technical Support
    Sun Microsystems, Inc.
    http://www.sun.com/developers/support

  • Dual Booting Windows and Solaris

    Hi
    how do i dual boot windows and solaris
    Do i install windows first and then solaris or do it the other way around..?
    how do i make sure that Windows and Solaris appear in my boot options..?
    Is their a guide on doing this...?
    Thanks
    Liam

    Hey I did a quick google search for you. So I havent tried this method myself but it sounds reasonable.
    The text below is from the following link:
    http://www.hccfl.edu/pollock/AUnix1/DualBoot.htm
    "Solaris boot loader
    Partition the drive to leave at least 2GB of space available for Solaris;
    more drive space is desirable.
    As with Linux, install Windows first then Solaris.
    Do not use the Installation CD but boot and install
    from Software CD 1.
    If you accept the default partitioning scheme which
    the installer provides you will soon run out of space in
    your / and /usr partitions since only enough space is
    allocated to install the system.
    All extra space is allocated to /export/home.
    A typical installation on a 4.5GB partition might look
    something like this:
    Filesystem Size Used Avail Use% Mounted on
    /dev/dsk/c0d0s0 900M 536M 310M 64% /
    /dev/dsk/c0d0s1 334M 109M 192M 36% /var
    swap 671M 8.0k 671M 1% /var/run
    swap 671M 8.0k 671M 1% /tmp
    /dev/dsk/c0d0s5 845M 222M 565M 29% /opt
    # (FAT32 partition):
    /dev/dsk/c0d0p0:1 5.0G 3.3G 1.6G 66% /c
    /dev/dsk/c0d0s7 1.1G 92M 954M 9% /export/home
    /dev/dsk/c0d0s4 752M 225M 474M 33% /usr/local
    The Solaris boot selector enables you to choose either
    Solaris or Windows with Solaris as the default.
    (I prefer grub or lilo!)
    To mount FAT under Solaris:
    # mount -F pcfs /dev/dsk/c0d0p0:c /dos (or �:1�?)
    And the vfstab file:
    /dev/dsk/c0d0p0:c - /dos pcfs - yes -
    To create a GRUB boot floppy, follow these steps:
    $ mkfs -t ext2 /dev/fd0
    $ mount /dev/fd0 /mnt/fd0
    $ mkdir /mnt/fd0/boot /mnt/fd0/boot/grub
    $ cp /boot/grub/stage[12] /boot/grub/grub.conf \
    > /mnt/fd0/boot/grub
    $ /sbin/grub --batch <
    Hope this helps!
    /Oscar

  • Solaris 10 & Windows 2K dual boot

    Hello forum,
    I installed Solaris 10 on a machine such that it dual boots with Win2K . All seemed well , I logged into Solaris and Win 2K and it worked properly .
    I tried logging into JDS 3 and after that it does not boot into WIn 2K .
    I get the menu asking which OS to boot into and whe I give the ID for Win 2K , it just returns to the menu .
    Any help in solving this issue is highly appreciated .
    Thanks and Regards

    Thanks for the reply , but do you have any idea as to what might have screwed it the partition.
    Also I don't think there is an issue with the partition , I strongly suspect the boot files would have changed though I really doubt it .
    Any ideas ???
    Thanks in advance .

  • Dual Boot Solaris 2.5.1 and 2.8

    Is it possible to dual boot a Sparc Ultra 10 workstation with Solaris 2.5.1 and a more recent version (such as 2.8). If so please point me to some documentation.
    This is required as we are running several pieces of software licensed against the hostid, that will soon require different versions of Solaris.
    Thanks in anticipation.

    You should make an alias for your second OS location, for example disksol28.The easiest way to do this is run the format command. Write down the physical path for each disk you see. Your boot disk is probably c0t0d0 and the second disk, if you have one would be c0t1d0. If you are going to install 2.8 on another slice/partition of the first disk, write down that pathname, you'll need it for the nvalias command. If you are going to install it on the second disk then the alias "disk1" will probably work already, if you did not change the eeprom during install. You'll just have to:
    ok
    boot disk1
    If you install 2.8 on another slice of your single disk then do not forget to include the slice in your alias.
    If I asume your 2.5.1 is a flat file system (/ only, no /usr, /var, /opt, /export etc.) on slice 0 and swap is on Slice 1, then I can put another flat file system on Slice 3 - don't touch Slice 2. This OS can use the same swap Slice 1. To create an alias to boot from Slice 3:
    ok
    nvalias disksol28 <pathname from format goes here> :d
    reset <- (locks it in to NVRAM)
    example:
    nvalias disksol28 /pci@1f,400/pci@1/disk@0,0:d
    reset
    Note:Slice 0 is asumed in most aliases. For example if your alias ends wih disk@0,0 Slice 0 is assumed. You can also say disk@0,0:a to indicate Slice 0 but ":a" is not really needed.
    If you are booting off of any other slice then it must be indicated in your alias.
    Slice
    0 :a
    1 :b
    2 :c
    3 :d
    4 :e
    5 :f
    6 :g
    7 :h
    If you want to create an alias for your second disk (c0t1d0) with root on slice 0:
    ok
    nvalias disksol28 <pathname from format goes here>
    reset <- (locks it in to NVRAM)
    example:
    nvalias disksol28 /pci@1f,400/pci@1/disk@1,0
    reset
    Please write down any custom aliases because a Stop+n or set-defaults will wipe them out.
    If you make a mistake with nvalias then:
    ok
    nvunalias disksol28
    reset
    If you want disksol28 to be your primary boot device then:
    ok
    setenv boot-device disksol28
    setenv diag-device disksol28
    reset
    Good Luck,
    John

  • WinXP dual boot Solaris on 2nd hard drive problem...

    Hi there ppl,
    run into a bit of a prob with dual booting winxp and solaris. I have WinXP on 1st hard drive and Solaris on 2nd hard drive 2 (Solaris - partition 1 with slice 0 x86 active, DOS - partition 2 for installing linux later, DOS - partition 3 for fat32 file storage later).
    I want to boot to Solaris on drive 2 from the WinXP boot loader on drive 1. Could somebody please tell me exactly how to do this as I've copied the bootsect.sun file from Solaris via floppy to the WinXP C:\ drive, and edited the WinXP boot loader to:
    [boot loader]
    timeout=30
    default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
    [operating systems]
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
    multi(0)disk(0)rdisk(1)partition(1)C:\bootsect.sun="Solaris/x86"
    and when I select to boot to Solaris I get:
    Windows could not start because the following is missing or corrupt:
    <Windows root>\system32\hal.dll
    Please reinstall a copy of the above file
    WinXP still boots ok.
    Any help would be much appreciated, thanks already.

    I am having a same issue....
    1.....1st 80 GB hard disk, I had window XP installed. (NTFS format)
    2....add 200 GB, 2nd hard drive, make 3 partitions, on first 50GB partition I have install Solaris 10.....Having some issue with network config, but its resolve, thank this forum.....
    Now, everytime when ever I need to go to Solarid, I have to go in BIOS screen and switch HD, I mean if I want to boot to solaris, I have to make a 2nd (200GB) hd primary..Soaris work fine, but from the GRUB menu, if I select window, its get hung up...
    now if I want to boot to window, again I have to go to BIOS and need to switch around hdd.... make 1st (80GB) hdd primary, windows work fine....
    Questions are, I do not want to go bacK & forth in BIOS.....
    1....Can some one help me, provide me the step-by-step information that how can i set up dual boot, so I can use my 2nd drive (200GB) as a primary and from the GRUB, I select windows and its boot to windows... if its otherway around,,,its still ok....I don't want my kids mess up BIOS....
    2...What is a chainloader+1...can some one explain?...what is +1 mean.
    3....How to install GRUB in MBR?
    Lion-O any ideas, how to boot windows bootloader from 2nd HD? Please step-by-step Instuctions....

  • Ultra 40-M2: How to dual boot Solaris 10 and Windows XP?

    I have an Ultra 40-M2 with 3 300-GB SAS drives.
    First two drives I will use for Solaris 10 and mirror them using Solaris Volume Manager.
    The 3rd hard drive contains Windows XP. I want to be given the option of booting into Windows. By default, I want to boot into Solaris 10.
    How do I enable all this? Is there a configuration file I need to edit in Solaris to create this dual boot?

    You don't need to configure GRUB. If the third drive is XP only, you can setup the boot order in your BIOS and when you boot the system you can hit the F8 key and select to boot from your XP drive.
    It works very well for me.

Maybe you are looking for