Dual Boot on Surface pro 3 (256GB I7) .. windows 8.1 & W10-Enterprise on VHD

Hi,
has anyone done this? it would assist me greatly in evaluating W10E... I know it would void the warranty, but I can always restore the original.
I am running W10E as VM at the moment but I would like to see how it performs natively ... but I need my W8.1 for work
many thanks
Sepp
Thanks Sepp

Configuration for dual boot with VHD boot is the same as with any other UEFI system. Create a VHD, configure it with the GPT partitioning scheme, apply the install.wim from the Windows 10 Technical Preview installation media with DISM and set it to boot
with BCDBoot.
Applying the image is covered here.
Using BCDboot is covered here.
In regards to the warranty, the
Surface warranty FAQ states:
Technical support: Provides help and technical support on preinstalled software for the first 90 days after purchase.
Brandon
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet

Similar Messages

  • Dual Boot Ubuntu Macbook Pro 8,1

    I have learned through trial and error (mostly error) that the newest Macbook Pro (early 2011 8,1) has a problem with ubuntu liveCDs and will not boot from them. I want to get Ubuntu running primarily so I can root my android phone. As of now I have Ubuntu 11.10 running on a virtual machine with VirtualBox but virtual machines don't work for rooting purposes. Is there still a way to dual boot a Macbook Pro 8,1 with Ubuntu?

    Ubuntu Live CD's are designed for generic PC machines, not Mac's with a GUID Partition Table and EFI.
    Booting and installing Ubuntu on a Mac can brick the machine, as the header on the GPT has a partial MBR like Windows full MBR, so it's mistaken for one and attmepts to install.
    Also Linux requires two partitions, one a swap partition which it mistakes the hidden EFI partiton for that.
    Getting a Lion based Mac to dual boot Linux is much harder than Snow Leopard, as there is a new hidden Lion Recovery Partiiton to deal with, also on the newer 2011 Mac's with recent firmware updates has caused all sorts of headaches for the required rEFIt needed (hasn't been updated) and creating two more partitions that Linux requires.
    If you had a pre 2011 Mac and no Lion, just Snow Leopard, I would say no problem.
    A much better option for you is to get a inexpensive machine and install Linux on it, or buy one already installed, until this Lion buisness settles down and urber geeks tweek Linux on Mac's again, but right now it's appearing Apple has charted a course for a closed operating system like a iPhone/iPad and that doesn't generate a whole lot of interest in running Linux on Mac's.
    http://www.system76.com/index.php/

  • Can I dual boot with MAC OS/X and Windows

    What is the best way to configure a dual boot on my MAC Bookpro laptop? Also, can I dual boot Windows 8 and MAC OS?

    The first alternative is a dual-boot arrangement between OS X and Windows provided with OS X.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
         1. Install the Apple Boot Camp software.  Purchase Windows
             XP w/Service Pak2, Vista, or Windows 7.  For Boot Camp
             4.0 and above you can only use Windows 7 or later. Follow
             instructions in the Boot Camp documentation on
             installation of Boot Camp, creating Driver CD, and
             installing Windows.  Boot Camp enables you to boot the
             computer into OS X or Windows.
         2. Parallels Desktop for Mac and Windows XP, Vista Business,
             Vista Ultimate, or Windows 7.  Parallels is software
             virtualization that enables running Windows concurrently
             with OS X.
         3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
             or Windows 7.  VM Fusion is software virtualization that
             enables running Windows concurrently with OS X.
         4. CrossOver which enables running many Windows
             applications without having to install Windows.  The
             Windows applications can run concurrently with OS X.
         5. VirtualBox is an Open Source freeware virtual machine such
             as VM Fusion and Parallels that was developed by Solaris.
             It is not as fully developed for the Mac as Parallels and VM
             Fusion.
    Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Can't PXE boot a Surface Pro 3 after already successfully imaging it

    hey guys. To try to eliminate a lot of the initial question that come up with this issue, I figure I will start with established info.  Our SCCM environment is healthy, and all images, drivers and apps are distributed to all of our DP's. We can image
    PC's and laptops with no issue at all. We use network PXE booting.  Using a 64 bit boot image. Needed drivers are injected into the boot image. Firmware on the Surface was updated.  Using the Surface NIC dongle. THis dongle was only used to image
    this Surface Pro 3 tablet one time. There is no record of the MAC of the dongle in SCCM since I deleted the Surface out, to make it an unknown again.
    So, with a lot of trial and error, I was finally able to get this tab to PXE boot, and then successfully image. Was testing out the new windows 8.1 image I had built.
    Since it ewas successful I wanted to add all of our apps to the TS and test them out in imaging. Well, I can no longer get this thing to PXE boot. It shows trying to Start PXE over IPv4, then just skips to IPv6, then boots up into windows.
    I have delted the secure keys form ther BIOS, then reloaded them.  I have tried hte full shut down method (Holding Volume Up and Power for 15 seconds, then waiting for 10 seconds or longer, then trying to PXE boot. I am getting a valid connection fro
    mthe dongle.
    Nothinhg I try works. Its tries to PXE boot over IPv4, but never gets there.  But I can PXE boot any of our PC's or Laptops,m so its just an issue with this damn Surface Pro 3.
    ANy advice?

    So I finally got our server guy to enable the logging and get that smspxe.log file to be accessible. So here is the info from the log, when I attempt to PXE boot the Surface. I see the last 2 lines where it ignores the request, I just don't know why its
    ignoring it.
    PXE::CNotifyTimer::TimerSignalFunc SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CNotifyTimer::ProcessTimer SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    Potentially missed device 50:1A:C5:FE:D6:E9 SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    Cleared Old Devices: 1 / 1 SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CBootImageManager::PerformMaintenenceTasks SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CBootImageManager::PurgeOldImages SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    Purging old images: 0 SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CNotifyTimer::Init SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CNotifyTimer::CancelTimer SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CNotifyTimer::RegisterTimeout SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    [172.028.000.223:67] Recv From:[172.028.011.002:67] Len:347 1ad0230 SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    ============> Received from client: SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    DHCP message:
     Operation: BootRequest (1)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 1
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 000.000.000.000
     Relay Agent IP Address: 172.028.011.002
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 1=DHCPDiscover
        Type = 57 Max DHCP Message Size: 05b8
        Type = 55 Paramerter Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 94 UNDI: 010310
        Type = 93 Client system Arch: 0007
        Type = 60 ClassIdentifier: PXEClient:Arch:00007:UNDI:003016 SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    <============ SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    ProcessMessage: Context:0241DF40  dTime:0 SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: DHCP Discover received. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    [172.028.000.223:67] Recv From:[172.028.011.003:67] Len:347 159d1f0 SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    ============> Received from client: SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    DHCP message:
     Operation: BootRequest (1)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 1
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 000.000.000.000
     Relay Agent IP Address: 172.028.011.003
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 1=DHCPDiscover
        Type = 57 Max DHCP Message Size: 05b8
        Type = 55 Paramerter Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 94 UNDI: 010310
        Type = 93 Client system Arch: 0007
        Type = 60 ClassIdentifier: PXEClient:Arch:00007:UNDI:003016 SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    <============ SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    ProcessMessage: Context:0241DE50  dTime:0 SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: DHCP Discover received. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Initialized CStringStream object with string: c7c22c7d-4f40-49f1-b7ed-871c18a07b05;2015-04-14T19:04:37Z. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Initialized CStringStream object with string: c7c22c7d-4f40-49f1-b7ed-871c18a07b05;2015-04-14T19:04:37Z. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set enterpirse certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set enterpirse certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set media certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  GET /SMS_MP_AltAuth/.sms_aut?MPKEYINFORMATIONEX SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set media certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  GET /SMS_MP_AltAuth/.sms_aut?MPKEYINFORMATIONEX SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Setting message signatures. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Setting the authenticator. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  CCM_POST /ccm_system_AltAuth/request SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Setting message signatures. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Setting the authenticator. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  CCM_POST /ccm_system_AltAuth/request SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    ::DecompressBuffer(65536) SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Decompression (zlib) succeeded: original size 148, uncompressed size 298. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
     SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    MP_LookupDevice succeeded: 0 1 0 1 0 SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: device is not in the database. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Getting boot action for unknown machine: item key: 2046820352 SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    ::DecompressBuffer(65536) SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Decompression (zlib) succeeded: original size 148, uncompressed size 298. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
     SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    MP_LookupDevice succeeded: 0 1 0 1 0 SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: device is not in the database. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Getting boot action for unknown machine: item key: 2046820352 SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Initialized CStringStream object with string: c7c22c7d-4f40-49f1-b7ed-871c18a07b05;2015-04-14T19:04:37Z. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set enterpirse certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Initialized CStringStream object with string: c7c22c7d-4f40-49f1-b7ed-871c18a07b05;2015-04-14T19:04:37Z. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set enterpirse certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set media certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  GET /SMS_MP_AltAuth/.sms_aut?MPKEYINFORMATIONEX SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set media certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  GET /SMS_MP_AltAuth/.sms_aut?MPKEYINFORMATIONEX SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Setting message signatures. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Setting the authenticator. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  CCM_POST /ccm_system_AltAuth/request SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Setting message signatures. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Setting the authenticator. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  CCM_POST /ccm_system_AltAuth/request SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    ::DecompressBuffer(65536) SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Decompression (zlib) succeeded: original size 409, uncompressed size 950. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820352" ServerName=""><Machine><ClientID>c70485df-9130-4b41-b61b-6c9e11b2f69a</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="10020125" OfferIDTime="4/2/2015 11:12:00 AM" PkgID="100000D0" PackageVersion="" PackagePath BootImageID="10000087" Mandatory="0"/></ClientIDReply>
     SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Client Identity: c70485df-9130-4b41-b61b-6c9e11b2f69a SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: SMSID=c70485df-9130-4b41-b61b-6c9e11b2f69a OfferID=10020125, PackageID=100000D0, PackageVersion=, BootImageID=10000087, PackagePath=http://JAG-SCCM-01E.jonesapparel.com/SMS_DP_SMSPKG$/10000087, Mandatory=0 SMSPXE 4/14/2015
    3:04:37 PM 7484 (0x1D3C)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: found optional advertisement 10020125 SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    ============> Reply to client (DHCPDISCOVER): SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    DHCP message:
     Operation: BootReply (2)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 0
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 172.028.000.223
     Relay Agent IP Address: 172.028.011.002
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 2=DHCPOffer
        Type = 54 Server idenitifier: 172.028.000.223
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 60 ClassIdentifier: PXEClient SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    <============ SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    ::DecompressBuffer(65536) SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Decompression (zlib) succeeded: original size 409, uncompressed size 950. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820352" ServerName=""><Machine><ClientID>c70485df-9130-4b41-b61b-6c9e11b2f69a</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="10020125" OfferIDTime="4/2/2015 11:12:00 AM" PkgID="100000D0" PackageVersion="" PackagePath="xx
    BootImageID="10000087" Mandatory="0"/></ClientIDReply>
     SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Client Identity: c70485df-9130-4b41-b61b-6c9e11b2f69a SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: SMSID=c70485df-9130-4b41-b61b-6c9e11b2f69a OfferID=10020125, PackageID=100000D0, PackageVersion=, BootImageID=10000087, PackagePath=http://JAG-SCCM-01E.jonesapparel.com/SMS_DP_SMSPKG$/10000087, Mandatory=0 SMSPXE 4/14/2015
    3:04:37 PM 7480 (0x1D38)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: found optional advertisement 10020125 SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    ============> Reply to client (DHCPDISCOVER): SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    DHCP message:
     Operation: BootReply (2)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 0
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 172.028.000.223
     Relay Agent IP Address: 172.028.011.003
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 2=DHCPOffer
        Type = 54 Server idenitifier: 172.028.000.223
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 60 ClassIdentifier: PXEClient SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    <============ SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    [172.028.000.223:67] Recv From:[172.028.011.003:67] Len:359 1acbeb0 SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    [172.028.000.223:67] Recv From:[172.028.011.002:67] Len:359 15a41f0 SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)
    ============> Received from client: SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    ============> Received from client: SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)
    DHCP message:
     Operation: BootRequest (1)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 1
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 000.000.000.000
     Relay Agent IP Address: 172.028.011.003
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 3=DHCPRequest
        Type = 54 Server idenitifier: 172.028.000.015
        Type = 50 Requested IP: 172.028.011.052
        Type = 57 Max DHCP Message Size: ff00
        Type = 55 Paramerter Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 94 UNDI: 010310
        Type = 93 Client system Arch: 0007
        Type = 60 ClassIdentifier: PXEClient:Arch:00007:UNDI:003016 SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    DHCP message:
     Operation: BootRequest (1)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 1
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 000.000.000.000
     Relay Agent IP Address: 172.028.011.002
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 3=DHCPRequest
        Type = 54 Server idenitifier: 172.028.000.015
        Type = 50 Requested IP: 172.028.011.052
        Type = 57 Max DHCP Message Size: ff00
        Type = 55 Paramerter Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 94 UNDI: 010310
        Type = 93 Client system Arch: 0007
        Type = 60 ClassIdentifier: PXEClient:Arch:00007:UNDI:003016 SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)
    <============ SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    <============ SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)
    Ignoring req from [172.028.011.003:67] Dest Server:[172.028.000.015] SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    Ignoring req from [172.028.011.002:67] Dest Server:[172.028.000.015] SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)

  • Dual Boot Win XP Pro 32-bit & Win Vitsa Ultimate 64-bit on same Hard Drive?

    I have a Mac Pro with four HD's. One HD is running 10.5.4 and the another HD is running 10.4.11. The third HD is for Mac data storage. My fourth HD is for Windows. This fourth HD is currently running Windows XP Pro 32-bit edition (the entire drive is a single partition formatted as NTFS). Can I install Windows Vista Ultimate 64-bit edition onto this same partition? I would like to be able to use boot camp to start into either Windows XP 32-bit or Windows Vista Ultimate 64-bit. I suspect that boot camp can get me as far as the Windows bootloader and then I would need to select which Windows OS to load ino???
    Has anyone actually successfully performed such a dual Windows OS installation using boot camp? This boot camp installation is also available with my Parallels installation. I am concerned that changing anything with break my ability to boot into Tiger (which I can right now) or my ability to load my XP pro system using Parallels.
    Obviously my reason for wanting a 64-bit Windows system is to support more memory (2GB max limit that is well documented for Windows installs using the Apple Boot Camp BIOS emulator).
    Thanks,
    Thomas

    01Bora wrote:
    Then you should be able to drop Vista on there...just a thought.
    Hmm I have to say, that's what I was trying to do with my single Xp installation:
    -Create a slot for it (partitionned FAT32)
    -Then "drop" (install) Xp using the normal Xp installer
    The whole process without using boot camp.
    It looks like your case, your Xp installation being my OS X, your Vista being my Xp.
    But it really didn't work at all. When choosing a partition to install Xp on, I just don't see my FAT32 space. Instead I see the whole drive as an unknown partition (mac partition are unknown to Win).
    So really Boot Camp does something else other than just partitionning, partitionning like I would do it with Disk Utility (which I did).
    Any idea?
    Message was edited by: Armaguy

  • Dual boot con ETS 8.0 vs Windows XP

    Me gustaria saber si es posible y como he de operar para poder tener un
    PC sobremesa como RT target. Disponemos de los tres floppys del labview
    real time 8.0 y queremos que sobre la RT engine podamos tener windows
    XP (ntfs) y ETS (fat32). ¿para la opción de dual boot es necesario
    utilizar siempre boot disk? ¿es posible tener una RT engine en la que
    podamos seleccionar si bootar con ETS o XP sin necesidad de floppy?
    Gracias

    Buenos días,
    hay varios documentos en el Developer Zone de cómo instalar ETS en un Pc de sobremesa. Aquí tiene algún enlace interesante
    http://zone.ni.com/devzone/conceptd.nsf/webmain/2b​20d544723c8f2d86256e8c0071c201
    Atentamente,
    crisR

  • Dual boot with Solaris 8.0 and Windows 98

    I am interested in Setting up my pc with with a Dual boot of Solaris 8 and Windows 98. I have a 60 GB hard drive that I am going to make two 30 GB primary Partitions on this hard dive. One with Windows 98 and one with Solaris 8 Intel Platform version. The question that I have, Is this particular Setup doable? And if so can you tell me what order they have to be installed and what partition software I should use for this procedure. Also if i missing procedure please be very detailed in explaining this to me. I read the message board was confused.
    If need be please email me at [email protected]

    Hey, goto http://math.uwb.edu.pl/~mariusz/dualboot/ and that will answer all your dual boot questions ?
    i2l2

  • Surface Pro 3 with MDT deployed 8.1 Enterprise integrated Update 1 missing power button?

    I am building / deploying an image for Surface Pro 3. Out of the box the Surface Pro 3 has the power button on start screen next to search button. However when I deploy 8.1U1 Ent the button disappears. Reading
    http://winsupersite.com/windows-8/windows-81-update-1-tip-toggle-power-button it appears depending on if the Surface Pro 3 is defined as Slate or Ultrabook it might or might not default to power button being on. Is this expected behavior, anyone else see
    this?

    Luckily I found
    http://blogs.technet.com/b/askcore/archive/2014/07/15/deploy-windows-to-surface-pro-3-using-microsoft-deployment-toolkit.aspx which goes into more detail and has workarounds for deploying Surface 3.

  • I am dual booting my mackbook pro with windows 7 64 bit. Yesterday it started locking up at the disk drive selections screen, when you hold down the "option" butting when powering on. I have been searching all morning, and so far nothing. Thanks. :)

    Hey folks,
    I have been using bootcamp for months now with windows 7 64 bit, and its been fine, yesterday while I was rebooting to do some gaming, at the hard drive selection screen when you boot holding the "options" butting down, it locks up when I select the windows drive and just sits there for ever. It doesn't throw an error, it boots fine into Lion.
    I searched all morning and didn't find anything, was hoping that someone might have an idea.
    Thanks in advance

    Search again. Microsoft has tips on what to do and Windows has a number of features
    system restore points
    automatic system repair using the Win7 DVD
    system restore image creation
    Just like you would with OS X Lion and Lion Recovery and Repair
    Use WinClone 3 www.twocanoes.com $20 to make an image just like you would with Disk Utility Restore or Carbon Copy Cloner
    rollback to last known good boot check point
    rollback a driver or program or any changes
    clean out temp files
    clean registry
    chkdsk
    https://discussions.apple.com/people/The%20hatter?view=bookmarks

  • Dual Booting Ubuntu with OS X and Windows 8 Bootcamp?

    I have Windows 8 Consumer Preview installed via Bootcamp, and OS X Lion as well. My question is: how would I install Ubuntu on another partition? So that when I held Option and started up my MacBook Pro, it would show Ubuntu as an option to boot. I already have Ubuntu 12.04 burned onto a disk, I just have no idea if it's safe to boot into the CD and install. Is it alright?
    Another thing, if it's required, I would be willing to delete my Windows Bootcamp partition.

    Choose Show Toolbar or Customize Toolbar from the View menu and put it back.
    (68254)

  • I have a dual boot with Ubuntu 10.10 and Windows 7, with linked profiles. When I upgraded to 4.0, my tabs and settings would show in Windows, but not Ubuntu. How do I fix this?

    This worked when I first installed and booted in Ubuntu. When I booted in windows, my tabs which were open in Ubuntu opened in Wndows. But, when I booted back into Ubuntu, all of my tabs and pinned tabs were gone, as well as the firefox button. My bookmarks and firefox background remained, but none of my tab settings.

    Norton is due to release a patch for both IE9 and Firefox 4 in May. See [http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-compatibility-with-IE9-and-FF4/td-p/420020 Norton compatibility with IE9 and FF4]
    To revert to 3.6.16, do the following.
    * Go to [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.16] and download it to the desktop.
    * Then go to Add/Remove Programs, scroll down to Mozilla Firefox and remove it, choosing to keep your bookmarks, customizations etc., (don't checkmark the box).
    * Then reboot and delete the folder called Mozilla Firefox at this location: C:\Program Files\Mozilla Firefox
    * Finally run the installation file you downloaded.
    Actually, Firefox 4 does have a means of identifying untrusted sites. See [[Site Identity Button]]

  • My dual boot mac book pro recognizes my ipod 1/2 of the time?

         I have a 17 inch Mac book pro with Windows 7/mac os 7 on it. I have  a 5th generation  classic ipod. The Itunes version is 11.2.  Why does my computer recognize the ipod only half of the time? It doesn't appear to be the usb cables as they sometimes work.My computerr is authorized.

    When was the last time you repaired permissions and/or restarted your computer?  Research your answer through Apple's Knowledge Base.
    iPod nano (5th generation) - User Guide

  • I need to know how to create a dual boot so that I can have Windows 7 and the Mac OS

    I need this so that I can have Microsoft Access, because it's not available for Mac..
    And, I have so many computer games that I have for Windows that I want to play on my Mac.
    Help please!

    You do not open it yet.
    First you need to read this: http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_Late2010.pdf
    This will tell you when the Windows image is required.
    Prepare for this on all fronts first ... backup/clone, and read the ENTIRE document.
    Then ask about what to do with the Windows ISO. 
    At least in my humble opinion.  This can go badly quickly if you miss a step.

  • Can I dual boot a macbook pro running Mavericks with Snow Leopard?

    I just got a Macbook Pro with quad core i7 with osx 10.9.5 but need to run software that will not run on a system higher that 10.6.8. How can I partition the drive so that I can install these?

    There have been discussions in ASC about using a virtualization software to then
    run an older 'server version' of Snow Leopard on a partition within a newer Mac...
    You can still buy the Server version of Snow Leopard from Apple. Not sure which
    virtualization software or utility you'd need to set it up, though; or if you'd also need
    to use BootCamp to set-aside a partition as well.
    My antiques don't have a feel that sort of thing...
    Good luck & happy computing!

  • Dual boot ing pre-installed Windows 8 and windows 7?

    Hi there
    I have a lenovo G505s that came with windows 8 and would like to download windows 7 and have them dual boot for gaming purposes so I was wondering I could get any advise on the matter.

    Welcome to the forum!
    With Windows, generally you have to install the older version first then the newer with dual booting.  Since you already have Windows 8 installed that might be a problem.  Also resizing the partitions on your hard drive to make room will disable the option to use One Key Recovery at boot up.  If the machine is still under warranty, you might wait till the warranty expires before re-arranging things.  Also prior to installing Windows 7, make sure there are drivers available for your system's hardware.
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Maybe you are looking for

  • Erro Jurisdiction Code não existente na tabela TTXJ

    Bom dia Pessoal, Alguém sabe como resolver este problema? Ao postar um documento na F-04 com um one-time vendor, o sistema abre a tela para informar os dados do parceiro. Ao entrar com o Domicílio Fiscal, é feito um check na TTXJ, e como não tem o re

  • How can I print a report twice?

    Hi, I4m trying to print a report twice in the same paper, landscape style. Someone know how can I do it? Thanks Veronica

  • Windows 8.1 laptop cannot connect to the internet using USB Mobile Broadband stick.

    I bought a new laptop and it came with Windows 8.1 installed. Well, things worked perfectly until I wanted to connect to the internet using my mobile broadband USB stick. I installed the software that came with the stick, and my laptop recognize the

  • New itunes wont install on windows 7

    itunes 11 wont install on my laptop, tried all the support articles i can find and nothing seems to resolve it. I either get the message that it cant be updated or "could not open key". Can anyone help?

  • Content Query Web Part and special characters in file names

    Hi All, Is there an out-of-box way to display periods in a file name if I am displaying a document library files? I do not want to end up doing a custom item style if possible. For example, file name is 8.5x11Letterhead.docx, 8.5x11Resume.pdf etc.  I