Dual Boot Windows 7

Hey guys, I was just wondering what exactly I need in order to successfully dual-boot my Mac into Windows 7. I've got the software for Boot Camp all down and ready, but my only question is finding the right copy of Windows 7 that'll install as a first time. Also, can I install Windows 7, or would I need Windows Vista/XP already installed and then just upgrade the Windows? Thanks, and could you tell me if this Windows 7 product is correct/eligible for Dual-Boot: http://www.bestbuy.com/site/windows-7-home-premium-with-service-pack-1-64-bit-li cense-and-media-1-pc-pc/5130359.p;jsessionid=B5FB2641437C993E1EAE2430E84DAB00.bb olsp-app03-156?id=1219111161659&skuId=5130359&st=categoryid$abcat0508002&lp=4&cp =1
I guess when it says PC disc, it'll work with dual-boot.
Again, thanks!

How old is your Macbook? The majority of them can directly install Windows 7.
Yes, the product you linked to from BestBuy is what you'd need to install Windows 7.
The only additional thing you'd need is a 4gb flash drive to store the Boot Camp drivers on after you first install Windows.
Setting up a Boot Camp partition is pretty straightforward, just start Boot Camp Assistant and follow the instructions. But feel free to post anymore questions if you have any, because there's always a chance of breaking something if you're doing it for the first time

Similar Messages

  • Dual boot windows mac mini

    I got a Mac mini and in general I'm happy with it but found out that there's some software I use regularly that is just much better on Windows.  They barely support OS X although technically they do.  So I would like to dual boot Windows as it seems like this is supported and not crazy.
    I followed the bootcamp and some guides I found via Google.  I have the mac mini 2014 with 8 gig ram and 1 terabyte of space.  I have dual monitors setup and a logitech mouse and a logitech gaming keyboard G110 - both USB.  (I also own a wireless apple keyboard which I occasionally use with my iPad).  My first problem was a DOS screen telling me I can't boot up on the specified disk but I did get some help off Google telling me to hold down option while booting (this should be in the guides ;p) but it was easy to fix.. however I'm stumped on what's happening now.
    When I click the Windows partition, it starts booting up Windows 7 Premium 64 bit setup and all looks good.  Then a screen pops up asking me what language/region I am.  The default is United states (perfect).  On this screen my keyboard and mouse are useless.  Or it's frozen.  I think the former.  I think the computer just can't recognize them.  And I cannot figure out a way around this.  If anyone can - please help I will be very thankful. 
    I've tried booting up using the Windows 7 DVD I own and an ISO installed on a USB flash drive per the Bootcamp installer.  Results are the same.

    Use Boot Camp!! Sounds like you have the install disc. Make sure you completely erase a USB 2.0 Thumb Drive format it as one MS DOS Master Boot Record partition. Download Drivers to it. I checked this box in boot camp only.
    Having install disc and driver thumb drive ready. Insert Windows install disc and plug in Thumb drive.
    Open Boot Camp uncheck first 2 boxes. Continue
    Size the BOOTCAMP partion you want it to be by sliding the bar. Or split your HD is an option.
    After that is complete. You will be asked where to install. Select BOOTCAMP partition
    Click Drive Options (advanced).  Click Format. Click OK. All goes well you click Next and it will format as NTFS
    Follow instructions to to install, set up and configure Windows.
    GO TO APPLE  SUPPORT no where else. PRINT BOOT CAMP Installation & Setup Guide. It is in my binder with my Windows 7 Professional Disc. You'll need this, I'm afraid, to have on hand. When Windows is up and going, Antivirus 1st, Install Windows express updates only. Do not update Apple drivers for Windows. Running Windows 7 Pro on my Mac Mini since I bought it in August. Use it for those outdated programs I can't run on Mac or Windows 8. Love it.
    GET THE MANUAL Please. Have fun with it.
    Oh, try left clicking your USB Mouse to make it work. If not use keyboard strokes. i.e. I  a ccept the license agreement (note that the a is underlined. hit "a" on the keyboard to check box.

  • Dual boot Windows 7 partition help

    I want to dual boot Windows 7 & arch but I need help with figuring out what partitions to make and where to put them because it seems the automatic partition-er won't do the trick for me.
    I have two drives that I want to completely format for a fresh, clean install: a 60GB SSD & a 750GB hard drive. I want the end result to be that the SSD only has Windows 7 Pro x64 SP1 installed to it and I will point the 'My Documents', 'My Pictures', etc. to a NTFS partition on the hard disk drive ( I know how to do this folder pointing ). I don't want arch to touch the SSD if possible so I can reformat the SSD separately if I ever just want to reformat Windows. I only want arch to be on the hard disk for that reason. I don't think I care which one handles the OS switching at boot ( should I favor Windows MBR or syslinux? Please give advice. ) And I would assume I make the NTFS partition on the hard disk a primary partition so how do I split up arch for the 3 other primary partitions left since the auto partition from the arch boot CD uses 4?

    I'm no expert, but the way I would do it would be like this:
    1. Create partitions on the HDD for /, /boot, /home and swap, along with one (or more) for your Windows personal files
    2. Set the BIOS to boot from the SSD.
    3. Install Windows on the SSD.
    4. Right-click the "My Documents" folder, select "properties", then the "Location" tab and choose the new location for the folder.
    5. Install Arch on the HDD partitions, and allow the boot manager to install itself in the MBR of the SSD.
    Then the whole boot process will be on the SSD...  If you ever need to get rid of the Linux bootloader, you can overwrite it with a "clean" Windows one using bootrec.exe (see here: http://support.microsoft.com/kb/927392).
    Last edited by esuhl (2012-03-26 04:52:12)

  • T440P Dual Boot Windows 8 with Centos 7

    So I have a T440p with Windows 8 installed. I have been trying to dual boot Centos 7 and also have attempted Centos 6.5. I have been using a bottable USB to perform the installation for both Centos 7 and 6.5.
    When I try the Centos 7 install, I set the boot priority to USB first on startup, and it goes to a screen that lists options to install, verify Centos 7 or troubleshoot. Upon selecting any of these options, everytime I get the error message:
    "alua: not attached"
    When attempting the Centos 6.5 Live DVD install, I try to boot into the Live mode, but it freezes in the process each time.
    I have heard about there being issues dual booting Windows 8 in UEFI mode with another Linux Distrobution.
    Has anyone here sucessfully dual-booted Centos or any other Linux Distrobution on a T440P?
    Any help/advice would be much appreciated.
    Thanks

    It's been many, many years since I don't do dual boot anymore. Don't find the reason to do it, either. Different kinds of virtualization should be enough. Anyway...
    dfw1417 wrote:
    It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
    ENJOY! This is the BEST machine I ever had!
    WHICH machine?
    Cheers.
    If I helped you, please give me some kudos! ^^

  • Dual boot Windows 8.1 with Yosemite

    I'm attempting to dual boot Windows 8.1 on my parents iMac. I downloaded and successfully used Boot Camp 5 to partition the drive, giving the new section 50GB. I successfully installed Windows 8.1. Unfortunate now I cannot access the Yosemite partition. Boot Camp is not available in the Windows 8.1 I just installed, so the obvious option to use Boot Camp to reboot into OS X is not available. I tried downloading Boot Camp in Windows, but it won't install - error message indicates there is no location to install it to. I tried to restarting and holding the option key 12 separate times, it always boots into Windows without bringing up the any other option. I tried booting into safe mode and resting the PRAM several times, same outcome of booting into Windows; although Windows did not always boot it froze half the time. The idea was just be able to run some Windows games without purchasing another computer. Any ideas on what went wrong and how to fix it?

    You do not need the Boot Camp drivers on Windows in order to start up in OS X. However, note that the option to start up with the Option (Alt) key is more tricky in those computers with a Bluetooth keyboard, such as the iMac.
    In order to start up in OS X, you have to press the Option key since the startup sound has finished (if you do it before, your Mac will not recognize it) and hold it until you see all bootable partitions in the screen. Then, choose your OS X volume.
    If you could not install the Boot Camp drivers in Windows, open Boot Camp Assistant after starting up in OS X and follow its steps (you will need a USB drive to save your drivers). Finally, start up in Windows, access to your USB drive through Windows Explorer and run the installer.

  • I want to dual boot Windows 8 on my 20-inch, Mid 2007 iMac, from an external USB drive.

    I want to dual boot Windows 8 on my 20-inch, Mid 2007 iMac, from an external USB drive. The internal drive is completely dead, it doesn't even show up in Disk Utility.  I'm running 10.8.2 from the external drive.  When I start Boot Camp Assistant, at the Introduction page, when I press the continue button nothing happens.  Do I have to have internal drive to run Boot Camp Assistant?  Can anyone provide me with the steps to dual boot, with his setup?  Thanks in advance!

    Hi maczimillon,
    Only follow these steps, it works for my:
    Open "System Information" and note your "Boot ROM Version" (some like MBP51.007E.B06)
    Navigate to "Utilities" in Finder and open the package contents of -BootCampAssistant.app- with right click. Duplicate the "Info.plist" file to the Desktop e.g. and open that with Text Editor.
    You must locate the keys "DARequiredROMVersions"and "USBBootSupportedModels"
    Add new strings with the information of your machine under booth keys (step 1), always respect the format, such as: <string>MBP51.007E.B06</string> for the frist key and <string>MBP51</string> for the second key.
    Save changes and replace the original plist file (it may ask you to enter admin pass)
    If you proceeded correctly you will see the checkbox "Create a Windows 7 USB install disk" enabled in Boot Camp Assistant.
    Then you can follow the usual Boot Camp installation using your WIN8 DVD iso image . The assistant program will proceed resizing your disk partition and installing necessary drivers for your iMac.
    I strongly recomends you to use thirld party's bootloaders like rEFInd (rEFIt) because of the Apple SMC versions of some old machines should not be able to boot properly from external devices like USB drives.

  • How to dual boot window 8.1 64 bit with xp sp1?

    Hello Hp PC Experts,
    Sir i was bought HP 15-r119TU two week  ago. So i face problem of dual boot with this HP note book. I need dual boot  window 8.1 64 bit with XP SP1. Kindly help me at the earliest possible.

    @mp56 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Y500 dual boot windows 8 and fedora 19 problem

    I bought a y500 two days ago and i wanted to dual boot windows 8 and fedora 19, so here's what i did
    1. downloaded fedora 19 (x64) iso from the fedora website.
    2.made a live USB using live usb creator.
    4.opened disk management utility and shrunk the c drive (windows 8 was installed here) by 100 gb and kept the 100gb unallocated.
    3. started the laptop with novo button, changed the bios config to boot from usb.
    4.installed fedora from usb, selecting the 100gb unallocated memory for installation
    5.restarted the laptop.
    now the problem is fedora works perfectly but when i try to boot windows 8, the following error is shown.
    windows failed to start
    file:\BOOT\BCD
    status: 0xc0000225
    info:the boot configuration data for your PC is missing or contains errors.
    i am guessing the fedora installation overwrote the boot files of windows and
     i have not taken a backup. please help

    hi,
    I have a Y500 and I wanted to dualboot fedora 19 with windows 8, this proved to be unsuccessful. I had made a repair disk before the process (but not a set of recovery disks unfortunately >.<   ). now I inserted the repair disk and selected the automatic repair option, it showed a message that auto recovery has failed.  now when I pressed the NOVO button and selected the system recovery option, it does not go into the OKR menu but continues with the normal booting process.  Can somebody guide me or give links where I can find step by step instructions to making OKR work and reset my laptop to factory settings? PLEASE help As Soon As Possible
    NOTE: I did resize the windows 8 os partition but the recovery and the lenovo partition are still untouched

  • Dual Boot Windows 8 and Linux?

    I have (UEFI System) an ASUS K55A UEFI motherboard laptop that came factory with Windows 8. I would like to install backtrack linux and Windows 8, but before I go screwing up my laptop, I want to see if this would be at all possible. I would use a virtual
    machine, but I need Backtrack Linux on a physical machine for testing purposes as I am taking a course in computer forensics, and I want to test cracking my home wi-fi. My processor is an Intel Core i5 2.5 ghz with a 500 GB HDD and 8GB DDR3 RAM. Any insight
    on this would be appreciated. Thank You.

    Hi,
    You can refer to this article to get detail information.
    http://apcmag.com/how-to-dual-boot-windows-8-and-linux.htm
    Niki Han
    TechNet Community Support

  • Dual Boot Windows 8 & 7 Help On HP Pavillion G9-1178CA

    Hello Guys I Just Need Some Help From You Guys So when I Try To Dual Boot Windows 7 & 8 it says that this partion is dynamic or something like that
    And i do not have ubuntu Dual booted so please help me thank
    -Sam

    Hi,
    To rebuilt boot loader, I suggest we can try following command when you enter Windows 8.1.
    Run cmd as administrator and type following command:
    BCDboot [Partition Letter with windows 7 installed]:\windows
    Note: if you installed Windows 7 on Partition F, the command can be write as: BCDboot F:\windows.
    Then, restart and boot into Windows 7.
    What’s going on?
    Kate Li
    TechNet Community Support

  • [SOLVED] dual booting windows 7 with btrfs on grub-bios -- core.img

    I am trying to install arch in a dual boot configuration with an existing windows 7 partition. I have everything from the beginner's guide done but the bootloader. When I run grub-install it tells me that core.img is too big.
    Some googling tells me that this is relatively common with btrfs, and it seems the only work around is to switch to gpt mode and use a grub bios partition. But the info I've seen indicates that I need to use MBR mode to dual boot windows.
    Is it safe to do this with windows? Is there another workaround? Or will I have to settle for ext4?
    Last edited by jorenko (2013-06-09 03:53:24)

    Well there's your problem, your first partition starts at sector 63.  With recent versions of windows and fdisk (and every other partitioning tool I can think of off the top of my head) things now align themselves correctly.  Also because there is now GPT, the first partition typically starts later as the GPT partition table will typically sit between the MBR and the first partition. 
    On a MBR partitioned system, grub2 will actually use the first 446 bytes like normal, but will then also use the space that is empty where GPT would sit.  This is why when you have a GPT partitioned system, it will require you to create a 1-2MB grub boot partition, as it needs somewhere else to put its bloat.  GPT actually still uses the MBR section, but simply creates one large partition covering the whole disk.  This is so that tools that are not GPT aware will not think that they have a whole free disk to use as they please.
    For comparison, here is whe I get from fdisk:
    # fdisk -l /dev/sda
    sudo fdisk -l /dev/sda
    [sudo] password for curtisshima:
    WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion.
    Disk /dev/sda: 250.1 GB, 250059350016 bytes, 488397168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk label type: gpt
    # Start End Size Type Name
    1 2048 2099199 1G EFI System EFI System
    2 2099200 252166798 119.2G Linux filesyste arch-btrfs-1
    3 252168192 488397134 112.7G Linux filesyste arch-btrfs-3
    Note that I do use GPT.  But that is not the point here. What I am trying to show is where my first partition starts.  This is also where fdisk will start partitions these days.  This is to ensure compatibility with 4k advanced format disks.
    If you are not dead set on Grub2, you could try using syslinux.  I really like it much better, though if you are booting more than one Linux, you need to either employ chainloading to various partition boot records, or have a shared /boot.  Having a windows partition doens't really matter, as you are simply chainloading to that funky reserved partition anyway. 
    The other option is to use grub-legacy, which can still be found in the AUR.  I actually liked the orginal Grub, as it provided a nice feature set, but was still configurable by hand and it actually fit into the MBR.

  • [SOLVED] Dual boot windows 7 and arch Linux with seperate hard drives

    Ok so I'm stuck trying to get my computer to dual boot windows 7 and arch. They are installed on different hard drives and I have grub 2 as the boot loader. I can't find any tutorials on how to do it with seperate hard drives I know how to do it if they are on the same hard drive. Also I want windows on the "first" hard drive how do I check to see which one it considers the first?
    Last edited by bdawg (2012-09-21 23:15:37)

    DSpider wrote:
    drobole wrote:If you want to change it so that sda becomes sdb and sdb becomes sda, you should be able to do that in BIOS.
    Not from the BIOS. He would need to physically open up the computer and switch the cables between them (or add another drive).
    There's no actual performance increase in changing this order. Performance increase is when you have the partitions as close to the beginning of a HDD as possible, where the platters spin faster (basic mechanics, not to be confused with CD/DVD, which are being written from the inside-out to prevent errors after extended usage), and it especially doesn't apply to SSDs whatsoever.
    You may be right about that. I remember I had to do this a while back but I probably switched the cables. It also messed up the drive mapping in Windows 98 if I remember correctly.

  • Lenovo C340 i3 System - Dual boot windows 7 / 8 cant load windows 7 please help

    Hi there
    I have a lenovo c340 all in one pc the i3 processor type which came with windows 8
    I have purchased a new hard drive and would like to dual boot windows 7 and 8
    I have tried to install windows 7 and the system hangs before I even get into any configuration however windows 8 loads fine
    I have looked in the bios and the system is showing windows 8 . has lenovo locked the bios to allow windows 8 only ?
    Is there a way to load windows 7 onto the system ?
    I really want to dual boot and have downloaded all of the drivers for windows 7 but for the life of me I can not get past the initial boot screen of my windows 7 disc
    Can anyone help please

    hi botards01,
    If you're planning to use linux occasionally (Ubuntu for example) and you don't want to risk losing the One Key Recovery functionality, try to install Ubuntu via Wubi as this doesn't repartition your HDD but creates a virtual disk on your current OS.
    Check it out - Install Ubuntu in Windows With Wubi
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Dual Boot Windows Boot Error (Required Device Inaccessable)

    I used to be dual booting Ubuntu & Windows 7. Have since replaced Ubuntu with Arch. Now I just installed GRUB2 and configured to to dual boot windows, but I found that Windows does not want to boot. I Googled and found http://www.petri.co.il/forums/showthread.php?t=42099, it looks like the same error codes and message. Problem is if I run Windows Startup Repair my GRUB will be gone and I need to restore it somehow? Is it possible to fix through Linux?
    Last edited by jiewmeng (2012-05-09 04:01:04)

    jiewmeng wrote:I used to be dual booting Ubuntu & Windows 7. Have since replaced Ubuntu with Arch. Now I just installed GRUB2 and configured to to dual boot windows, but I found that Windows does not want to boot. I Googled and found http://www.petri.co.il/forums/showthread.php?t=42099, it looks like the same error codes and message. Problem is if I run Windows Startup Repair my GRUB will be gone and I need to restore it somehow? Is it possible to fix through Linux?
    https://bbs.archlinux.org/viewtopic.php?id=140730
    https://wiki.archlinux.org/index.php/GR … mand_shell
    http://axel668.blogspot.com/2011/03/how … grub2.html

  • Dual Boot, Windows doesn't boot.

    Hi there,
    Firstly, I'd like to apologize in advance if this has already been answered somewhere, but I couldn't seem to find it anywhere.
    Yesterday, I tried to dual boot Windows 7 on my iMac with the latest version of Lion. I used Bootcamp and everything went according to plan untill I had to install Windows. My Mac restarted and began to install Windows, but after a while of installing, the disc stopped running and everytime I heard it trying to get back running, it was stopped by a weird noise, as if something was grinding onto it.
    This kept going for a minute or two, when I decided to turn it off, since nothing was happening. After that, I started my Mac again and after a white screen, the only thing it shows is a black screen with a little type cursor in the upper left corner. I've tried to reboot it many times but I can't do anything, if I take the disc out, the only thing I get is a white screen, it doesn't go back to the normal Apple logo.
    If anyone has some tips on where i should go with this, it'd be greatly appreciated!

    You need to delete the boot camp partition and start over. Use Book Camp Utility or Disk Utility to remove the partition.
    What happened is when you installed Windows and it did not finish installing the OS and will keep trying to boot to that partition and finish. Until the OS install is finished the Mac is flagged to boot automatically to that partition. This is why you are seeing the black screen.

  • Dual booting Windows 8 and Arch Linux with UEFI

    Hi all!
    I'm trying to install Arch Linux on my computer where I already have Windows 8, and I'm getting a little stuck when it comes to the partitioning.
    Following the beginner's guide and the method here: https://wiki.archlinux.org/index.php/Un … n_in_Linux for setting up the partitions properly, regarding UEFI. My problem is that when using cgdisk to set up a new EFI system partition (ef00), I get an error message when trying to write the partition table (just saying that something went wrong). I figure the problem is that I already have a partition like this (correct me if I'm wrong), but it really looks like it succeded (see info below). So my question is: How do I preceed to keep my Windows 8 installation happy, but installing Arch? Do I remove the old EFI system partition and create a new one, or is there some method that allows me to edit the already existing one, to allow me to dual boot Windows 8 and Arch?
    My partition table now looks like this:
    Part. # Size Partition Type Partition Name
    1007KB free space
    1 500MB Windows RE Basic data partition
    2 300MB EFI System EFI system partition (this one was already present on my system)
    3 128MB Microsoft reserved Microsoft reserved partition
    4 63.5GB Microsoft basic data Basic data partition
    8 512MB EFI System EFI System partition (this is the one I tried to create when I got the error message)
    5 29.5GB Linux filesystem Arch (this is where I was going to put my Arch installation)
    6 22GB Windows RE Basic data partition
    7 1024MB Windows RE Basic data partition
    615KB free space
    Just for the record; I only created partition #8 and #5.
    Any help is appreciated! And sorry for beeing a total noob, but I really suck at this.

    sudo make sandwich wrote:If it is possible to share ESP between OSes, how do I do this (would it be sufficent to follow this section: https://wiki.archlinux.org/index.php/Beginners'_Guide#For_UEFI_motherboards)?
    There's really very little to do to share an ESP between OSes. Most OS installers will auto-detect the ESP and use it. Problem solved. For Arch it may be a bit more effort just because Arch uses a more hands-on installation process, but I've only done a couple of Arch installations, and the last one was several months ago, so I don't recall the details clearly enough to comment.
    And how big will the partition need to be? The beginner's guide says 512MB or higher.
    I don't know what was in the mind of the author, but my guess is that's because that's roughly the cutoff point where mkdosfs starts creating FAT32 by default rather than FAT16. The ESP is officially supposed to be FAT32, not FAT16, although FAT16 usually works OK. It's also possible to create FAT32 on smaller partitions by using an explicit option to mkdosfs ("-F 32").
    The optimal size of the ESP depends on the files stored on it. If you don't store your Linux kernels, something as small as 100MiB is usually adequate; but a few Linux kernels and their initrd files can consume twice that amount. My own recommendation is for the ESP to be 200-500MiB.
    The only error message I got from cgdisk is "Problem saving data! Your partition table may be damaged!", however booting Windows again works fine. Parted did not complain about antything.
    Use the "verify" function in cgdisk. That will reveal any problems with the data structures. If a verify turns up OK, then that means that cgdisk ran into some sort of disk problem. Running gdisk rather than cgdisk and using the gdisk "w" option (without making any changes) may produce a more helpful error message.

Maybe you are looking for