Dual Core, but just one recognized [SOLVED]

In the last days I had problems with my computer just going off randomly after some time... As I found out the CPU fan was too loose... Now I somehow fastened it so it seems to work normally now.
Today I noticed (I'm not sure whether it's now the first time or I just didn't see it) that on booting I see just one Arch logo, although I have a Dual Core processor and normally there are 2 logos... I checked whether GRUB has the option nosmp set which was not the case. cat /proc/cpuinfo gave me just one core.. Then I tried to boot the arch live cd (the 2008.06) and cpuinfo had both there!
The BIOS says that there are still 2 as well... so my first idea, that one core is broken because of overheating seems to be wrong, it's impossible that just one core breaks, doesn't it?
So my question is - how do I get my core to be recognized again? I have the new 2.6.29 kernel.. could this be the problem?
My second question is - the information about launching daemons on booting appears AFTER showing the login prompt (I login via tty) [EDIT: This had to do with the OpenNTPD daemon...]
Last edited by icetonic (2009-04-16 15:46:27)

Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x7ffc0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007ffc0000 (usable)
modified: 000000007ffc0000 - 000000007ffce000 (ACPI data)
modified: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
modified: 000000007fff0000 - 0000000080000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fef00000 (reserved)
modified: 00000000ffb80000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 7ff24000 - 7ffafb9e
Allocated new RAMDISK: 00011000 - 0009cb9e
Move RAMDISK from 000000007ff24000 - 000000007ffafb9d to 00011000 - 0009cb9d
ACPI: RSDP 000FB800, 0024 (r2 ACPIAM)
ACPI: XSDT 7FFC0100, 0054 (r1 HYRSLP HYRSLPTB 9000706 MSFT 97)
ACPI: FACP 7FFC0290, 00F4 (r3 A_M_I_ OEMFACP 9000706 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 7FFC05C0, 659A (r1 A0904 A0904000 0 INTL 20051117)
ACPI: FACS 7FFCE000, 0040
ACPI: MCFG 7FFC0400, 003C (r1 A_M_I_ OEMMCFG 9000706 MSFT 97)
ACPI: SLIC 7FFC0440, 0176 (r1 HYRSLP HYRSLPTB 9000706 MSFT 97)
ACPI: OEMB 7FFCE040, 0060 (r1 A_M_I_ AMI_OEM 9000706 MSFT 97)
ACPI: HPET 7FFC6B60, 0038 (r1 A_M_I_ OEMHPET0 9000706 MSFT 97)
ACPI: SSDT 7FFC6BA0, 0206 (r1 A_M_I_ POWERNOW 1 AMD 1)
1159MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 005ac000 - 005b2f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00005a8584] TEXT DATA BSS ==> [0000100000 - 00005a8584]
#4 [00005a9000 - 00005ac000] INIT_PG_TABLE ==> [00005a9000 - 00005ac000]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000011000 - 000009cb9e] NEW RAMDISK ==> [0000011000 - 000009cb9e]
#8 [00005ac000 - 00005b3000] BOOTMAP ==> [00005ac000 - 00005b3000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007ffc0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffc0
On node 0 totalpages: 524111
free_area_init_node: node 0, pgdat c0431600, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2320 pages used for memmap
HighMem zone: 294578 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x508
ACPI: No APIC-table, disabling MPS
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520015
Kernel command line: root=/dev/disk/by-uuid/206cc51d-0ece-4693-a6cc-156428ba637f resume=/dev/sda5 ro vga=792 noapic
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2109.362 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073012k/2096896k available (2369k kernel code, 22620k reserved, 1056k data, 356k init, 1187592k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc045f000 - 0xc04b8000 ( 356 kB)
.data : 0xc03507cf - 0xc0458a88 (1056 kB)
.text : 0xc0100000 - 0xc03507cf (2369 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4220.50 BogoMIPS (lpj=7031206)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 10k freed
ACPI: Core revision 20081204
ACPI: Checking initramfs for custom DSDT
ACPI Error (dswload-0239): Invalid type (Alias) for target of Scope operator [\._P] (Cannot override) [20081204]
ACPI Exception (psloop-0227): AE_AML_OPERAND_TYPE, During name lookup/catalog [20081204]
ACPI: setting ELCR to 0200 (from 8c00)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4220.50 BogoMIPS).
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc3f]
pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xdbfff000-0xdbffffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xdbffec00-0xdbffecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0xdbff8000-0xdbffbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:07.0: reg 10 32bit mmio: [0xdbffd000-0xdbffdfff]
pci 0000:00:07.0: reg 14 io port: [0xd480-0xd487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0xd400-0xd407]
pci 0000:00:08.0: reg 14 io port: [0xd080-0xd083]
pci 0000:00:08.0: reg 18 io port: [0xd000-0xd007]
pci 0000:00:08.0: reg 1c io port: [0xcc00-0xcc03]
pci 0000:00:08.0: reg 20 io port: [0xc880-0xc88f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xdbffc000-0xdbffcfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:04.0: transparent bridge
pci 0000:02:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f]
pci 0000:02:00.0: reg 30 32bit mmio: [0xdefe0000-0xdeffffff]
pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
pci 0000:00:09.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB2] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LMAC] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs *15)
ACPI: PCI Interrupt Link [LSA1] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 08, should be 03 [20081204]
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: ioport range 0xa30-0xa37 has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x500-0x57f has been reserved
system 00:06: ioport range 0x580-0x5ff has been reserved
system 00:06: ioport range 0x800-0x87f could not be reserved
system 00:06: ioport range 0x880-0x8ff has been reserved
system 00:06: ioport range 0xd00-0xd7f has been reserved
system 00:06: ioport range 0xd80-0xdff has been reserved
system 00:06: ioport range 0x2000-0x207f has been reserved
system 00:06: ioport range 0x2080-0x20ff has been reserved
system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:06: iomem range 0xffb80000-0xffffffff has been reserved
system 00:06: iomem range 0xff300000-0xff3fffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: ioport range 0x230-0x23f has been reserved
system 00:0b: ioport range 0x290-0x29f has been reserved
system 00:0b: ioport range 0xa00-0xa0f has been reserved
system 00:0b: ioport range 0xa10-0xa1f has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: IO window: 0xe000-0xefff
pci 0000:00:09.0: MEM window: 0xdc000000-0xdfffffff
pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: disabled
pci 0000:00:0b.0: MEM window: disabled
pci 0000:00:0b.0: PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: IO window: disabled
pci 0000:00:0c.0: MEM window: disabled
pci 0000:00:0c.0: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 mem: [0x0-0x0]
pci_bus 0000:01: resource 1 mem: [0x0-0x0]
pci_bus 0000:01: resource 2 mem: [0x0-0x0]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdfffffff]
pci_bus 0000:02: resource 2 mem: [0xc0000000-0xcfffffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 mem: [0x0-0x0]
pci_bus 0000:03: resource 1 mem: [0x0-0x0]
pci_bus 0000:03: resource 2 mem: [0x0-0x0]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 mem: [0x0-0x0]
pci_bus 0000:04: resource 1 mem: [0x0-0x0]
pci_bus 0000:04: resource 2 mem: [0x0-0x0]
pci_bus 0000:04: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 558k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1239902785.206:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1732
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:09.0: setting latency timer to 64
pcieport-driver 0000:00:09.0: irq 16 for MSI/MSI-X
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: irq 17 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: irq 18 for MSI/MSI-X
vesafb: framebuffer at 0xdd000000, mapped to 0xf8080000, using 6144k, total 14336k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:b470
vesafb: pmi: set display start = c00cb4d3, set palette = c00cb52e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
IO APIC resources could be not be allocated.
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 356k freed
SCSI subsystem initialized
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
libata version 3.00 loaded.
pata_acpi 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
pata_acpi 0000:00:08.0: setting latency timer to 64
pata_acpi 0000:00:08.0: PCI INT A disabled
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATAPI: PHILIPS SPD6005T, P1.0, max UDMA/66
ata1: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11)
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM PHILIPS SPD6005T P1.0 PQ: 0 ANSI: 5
ata2: port disabled. ignoring.
sata_nv 0000:00:08.0: version 3.5
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 15
ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 15
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD3200AAJS-00VWA0, 12.01B02, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda4 < sda5 sda6 sda7 >
sd 2:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
udev: starting version 141
loop: module loaded
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver rt73usb
fuse init (API version 7.11)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.2.0 (interface 0x000a0009).
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
IT8712 SuperIO detected.
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 10, io mem 0xdbffec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 11, io mem 0xdbfff000
Driver 'sr' needs updating - please use bus_type methods
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 11 (level, low) -> IRQ 11
forcedeth 0000:00:07.0: setting latency timer to 64
sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
Linux agpgart interface v0.103
usb 1-4: new high speed USB device using ehci_hcd and address 2
input: PC Speaker as /devices/platform/pcspkr/input/input4
lp0: using parport0 (interrupt-driven).
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 3
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1b:fc:fc:c3:29
forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
usb 1-5: configuration #1 chosen from 1 choice
usb 1-4.1: new high speed USB device using ehci_hcd and address 4
usb 1-4.1: configuration #1 chosen from 1 choice
nvidia: module license 'NVIDIA' taints kernel.
ppdev: user-space parallel port driver
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
Error: Driver 'pcspkr' is already registered, aborting...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
wmaster0 (rt73usb): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 11 (level, low) -> IRQ 11
HDA Intel 0000:00:05.0: setting latency timer to 64
psmouse serio1: ID: 10 00 64<6>wlan0 (rt73usb): not using net_device_ops yet
Registered led device: rt73usb-phy0:radio
Registered led device: rt73usb-phy0:assoc
Registered led device: rt73usb-phy0:quality
usb 1-4.3: new high speed USB device using ehci_hcd and address 5
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 11
nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 11 (level, low) -> IRQ 11
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
usb 1-4.3: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device USB Video Camera (0471:0334)
input: USB Video Camera as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.3/1-4.3:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
EXT3 FS on sda7, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3919820k swap on /dev/sda5. Priority:-1 extents:1 across:3919820k
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:1: Attached scsi generic sg3 type 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:2: Attached scsi generic sg4 type 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:3: [sde] Attached SCSI removable disk
sd 4:0:0:3: Attached scsi generic sg5 type 0
usb-storage: device scan complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
rt73usb 1-4.1:1.0: firmware: requesting rt73.bin
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:14:7f:83:b1:bb
wlan0: authenticated
wlan0: associate with AP 00:14:7f:83:b1:bb
wlan0: RX AssocResp from 00:14:7f:83:b1:bb (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
IRQ 11/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs

Similar Messages

My Apple ID is still disabled. How to fix it? I tried the steps given but just cant be solved. Please help.

My Apple ID is still disabled. How to fix it? I tried the steps given but just cant be solved. Please help. i use right keyword but cant open apple id my

Goldboyvidar wrote:
how i can open my apple id??
As the article states, you need to reset your password.
how i can talk to apple center and i am deaf cant call them and them have not email???
You can contact Apple Support online here
or
by phone: Apple Support Numbers

G5 1.8 dual core recognizes only one core

I recently bought a dual core G5. The G5 isn't recognizing one of the cores. Any ideas how to fix it?

I don't usually have this problem, but I'm having it now with a project I'm doing while working off of Access Music's virus logic template. I wonder if there's a setting or something. One core is maxxing out and crashing the system, and the other is completely unused. I'd like an answer .

Dual Core yet only one is working win8.1

Since a couple of days ago i've learn a trick which consisted in going to msconfig , Boot , Advanced settings and selecting 2 processos which would make my computer faster.
I came to notice that my computer started getting slow , when i started "searching" for the cause i saw that my computer was working on 1 of the 2 cores that it has.
Since then my win 8.1 has been working nearly always at 100% cpu usage , how can i put the dual cores back to usage?

Hi,
Please refer to the screenshot below to check your system boot configuration settings, make sure it's same with the picture.
After that, please restart your computer to check if the problem resolved, if not, please feel free let me know.
Roger Lu
TechNet Community Support

Dual speakers but only one at the bottom

Hi I have just purchased a tablet A7-50 A3500-F in the photos of this tablet it clearly shows that the speaker above the Lenovo sign is a mesh (holes in it) but on my device it has just got a blank plastic plate instead of mesh. is this faulty? I have taken a photo to show you what I mean. thanks
Link to image
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums
Solved!
Go to Solution.

i noticed that in the quick start guide it points to this at the top as being a receiver but dont have any idea what it receives. i sent lenovo an email but all i got back is it might be a new bit to make it look sleeker. i was under the impression that it had dual speekers so im still none the wiser.

New 8 Core ( but just 4 for Logic ...obviously )

Dears all,
i've purchased a new 8 core.
Obviously Logic can "see" only 4 processors. ( Obviously )
Any news about some patches or little update ??
Many thanks in advance
-Anton
Mac Pro 8 core/ G5 Dual 2x2 /G5 2.3Dualcore/Pbook 1Ghz/Ipod 5th Mac OS X (10.4.9)

You go Anton! 8-core, with Logic, give it another few
months when the processor/5355-Zeon is availabe by
Apple then i'll sure know to feeling, of 8-core by
then leapoard should be out every thing working on
64-bit then maybe something new fr Logic, then the
games on.
Fr. BlayZay.
Even if Leopard comes out fully supporting 64-bit applications, it won't turn 32-bit applications into 64-bit applications, and it's very unlikely that many applications will be quickly converted for full 64-bit use. Most programs won't benefit from 64-bit addressing.

G5 dual-core won't burn audio CDs

I have a brand new dual-core 2.0 Ghz G5. It won't burn audio CDs that play on any of my dedicated CD players.
The CD players are fine. In fact, I had a PB G4 that I used to burn CDs that play perfectly on all of them up until I got the G5. I have tried three different brands of CD-R media (Sony, Maxell, TDK - all of which worked just fine on the G4) to no avail. I've tried burning from both Toast and iTunes 6.0.1, at speeds as low as 2x. I even did a complete clean install of OS X and tried burning from a fresh user account (with iTunes 5.0.1). Same problem.
Here's what happens: the CD burns "successfully" in iTunes and Toast (no error messages), and it shows up on the desktop and in the iTunes menu and plays fine on my computer. But when I put it into a CD player and press play, it just spins around and around and doesn't ever start playing.
This is incredibly frustrating and I'm not sure what to do at this point. I have contacted Apple but they are hesitant to replace the optical drive. According to them, if it's burning CDs that play on my computer, then the drive is OK. They admitted that it might be more "sensitive" than my Powerbook's drive, and perhaps "incompatible" with my dedicated CD players. I asked them what the point of having a Superdrive is if it won't burn CDs that work on any dedicated CD players... well, the conversation got unpleasant after that.
If anyone has any ideas for how to troubleshoot this, or fix it, I'm all ears!
G5 2.0 dual-core Mac OS X (10.4.3) 17" Apple LCD, iSight, Bluetooth Keyboard & Logitech Cordless Laser Mouse

I don't have the dual-core but experienced the same thing. I tried to burn a DVD after having my G5 for one year. It didn't burn the disk. I called Apple and no support for G5 not in warranty. I purchased a new DVD burner and didn't have any problems since. The old burner was a Sony, the new one a pioneer DVR 106D.
I recently purchased DL DVR Pioneer drive (DVR DL-110D) and I can't even put a CD in the drive to burn. Worst money I ever spent. Don't know how Apple is on support of the DL drives but I'm going back to the old DVR-106D!

Can I just setup my pages for just one page not the whole document?

I want to change my page to landscape but just one page not all document how can I do it.
thank you

May you take time to search for the keyword 'landscape' in the existing threads ?
This question was asked and responded many times.
Yvan KOENIG (VALLAURIS, France) dimanche 20 juin 2010 20:39:31

Commit Work for just one function module

Hi experts,
i have one question;
I need one solutions for commit work but just one function module. If i set commit work in function module then everything is taking the commit. But i dont like this. I need just for FM. This is impossible ?
Thak you, regards.

Hi,
The only way I know involves creating a nested LUW - opening a new internal session by calling ABAP program using SUBMIT ... AND RETURN or a CALL transaction code.
Meaning, you'd have to code your logic in a report program/transaction, use the function module to merely call that report/transaction and, if necessary, use EXPORT/IMPORT or SHARED MEMORY to exchange data between the sessions. It's quite "ugly" solution IMO, and it involves session handling overhead, which can make it unsuitable for time-critical mass processing.
Cheers,
Janis

Only one CPU core recognized [solved]

For some reason the kernel only recognizes one CPU core out of two. I'm not completely sure at which kernel upgrade it disappeared but it is gone in 2.6.36 and 2.6.37. I know it was still there in september 2010 and earlier. I'm using a x86-64 kernel.
cat /proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) II X2 245 Processor
stepping : 2
cpu MHz : 2913.253
cache size : 1024 KB
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc up rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
bogomips : 5828.27
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
Motherboard is: Gigabyte MA770T-UD3P. I use the latest bios.
I have tried adding the kernel options "acpi=off noacpi apic=off noapic" as to the suggestion of a ubuntu bug report in launchpad but it didn't help. I also disabled ACPI in the bios but I'm still limited to one cpu core.
Any ideas?
[SOLVED]
I just doublechecked the BIOS settings and it had the CPU Core Control set to manual and one core was disabled. I set it to auto again and now both cores are recognized correctly. I don't recall ever touching this setting but at least it works now. Maybe a bios update actually changed the setting or (more probable) a friend of mine.
Last edited by Baraclese (2011-01-17 19:01:02)

JOhnLiu wrote:
thanks for reply sb92075
[root@localhost ~]# mpstat -P ALL 2
Linux 2.6.18-164.el5 (localhost.localdomain)    09/12/12
09:29:09     CPU   %user   %nice    %sys %iowait    %irq   %soft %steal   %idle    intr/s
09:29:11     all    0.01    0.00    1.27    0.01    0.00    0.01    0.00   98.69   1658.29
09:29:11       0    0.50    0.00    0.00    0.00    0.00    0.50    0.00   98.99   1657.29
09:29:11      73    0.00    0.00    0.00    0.00    0.00    0.00    0.00 100.00      0.00
09:29:11      74    0.00    0.00 100.00    0.00    0.00    0.00    0.00    0.00      0.00
09:29:11      75    0.00    0.00    0.00    0.00    0.00    0.00    0.00 100.00      0.00
09:29:11      76    0.00    0.00    0.00    0.00    0.00    0.00    0.00 100.00      0.00I think you don't understand what i mean .
there just have ONLY ONE CORE %sys 100
the top command show average of all cpu core sys% usage
when the one core sys% is 100%
the system are very slow .
e.g: when I create a database instance used for a long time . over 2 hours
but generally it will be done at most 1 hours or shorteris any type of OS virtualization involved in this environment?

We own 5 Apple devices but for some reason I cannot get iTunes to recognize one of the iPads. The other 4 show up just fine and we can sync and do all the stuff we are supposed to do, but this one device is never recognized. Tried everything. Help!

We own 5 Apple devices but for some reason I cannot get iTunes to recognize one of the iPads. The other 4 show up just fine and we can sync and do all the stuff we are supposed to do, but this one device is never recognized. I've tried updating the software, reinstalling iTunes, using different ports on the laptop, different cables...just about everything. I have NEVER been able to connect this one device, but all the others are fine. I'm at my wits end. Is there someone out there who can help a relative novice figure out what's going on? Thanks so much!

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom

HP 4510S laptop. has dual core processor but is only running one half of it.

This system is running on Win 7 32bit. If I upgraded to W7-64 bit would the system then use both halves of the processor?

I use BELARC advisor which lists all hardware, SW on my system. It also tells me what processors I have, memory, etc. It will also tell me if I have a dual or single core processor and whether it is running both cores or only one. My gateway NV50 is running Win 7-64 bit and BELARC tells me how it is working on both cores. But my wifes LT which is an HP has win 7-32 bit for an OS and Belarc advises that it is only running one core. That is why I asked the question. I am upgrading the HD from 250 to 750 gb and maxing out her memory. Maybe then she will quit complaining about how slow it works.

The AVI Radeon X1900 XT video card in my Mac Pro Dual-Core went bad and I need to replace it. I found one that is $250 but I don't think that I need the gaming-type processor. I am using a 23" Apple Display. Are there lower cost options? -C

The Radeon X1900 XT video card went bad in my Mac Pro Dual-Core Intel Xeon. (I tried it with a good one at the office). I found one online that was $250. I don't need the gaming capacity of this card and was wondering if there were less expensive video cards that I could use in this machine. I run Adobe Creative Suites for graphics design and have a 23" Apply display. Thank you for any help that you can provide. -PretzelMcK

Then pick up the ATI 5770 AND upgrade to 10.6.8.
Same price for a good card that will work and helps to have 1GB VRAM.
There aren't any other real choices let alone less expensive.
Even the ebay links I had and not a lot of choices.

Power Mac G5 Dual Core Screen Goes Black Randomly But Seems To Still Be Running. I have to Force Quit

I totally just typed way to much info in the title.
In any event, my G5 Dual Core's(late 2005) screen will randomly go black with out notice. Its happend while designing in illistrator and also while browsing google(primarly the use of my comp is graphic design). The fans stay on and it sounds to still be fully running however the screen will not wake up and if i tap the power button it doesnt wake up either. I reset the "PRAM" while booting up, i toggled my screen saver/power saver also so its "never".
I thought the HD was faulty cause it sounds like a light saber at times... I figured the OS was crashing(im ingorant) so I bought a new one and more ram as well. I've installed the HD and am waiting for 10.3 OS to get here in hopes that the new HD and OS will not crash(again that was my educated guess as to what the issue was).
Is it a video card issue? faulty cable you think(VGA to DVI 17" Samsung)?
Thanks so much in advance for any and all feed back along with the patience of a newbie to the forum/community world.
-KRAWSH

Hello,
Have you blown the dust out of it lately, especially the Video card, Power Supply, & RAM areas?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
If you have any temps in the 70°C/160°F range, that's likely it.

I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

Dual Core, but just one recognized [SOLVED]

Similar Messages

Maybe you are looking for