Dual Core Center hates me

My MSI P965 Platinum woes continue
Firstly, my DVD burner wouldn't work properly until I flashed the BIOS. How can you ship a motherboard where something a simple as the IDE channel doesn't work properly. Looking at the number of threads here where the JMicron chip was the issue I'm surprised it hasn't been banned yet.
Secondly, I finally got my HHD speeds back to normal after installing my system with my SATA ports set to RAID and the RAID drivers (even though I'm not using RAID). Today though I am experiencing random system freezing and even a reboot.
Now my latest headache is with the Dual Core Center that just won't work. And I do have the .NET 3 Framework installed. It installs fine, but when I try run it crashes and says DCC has encountered an error and needs to shutdown.
Setup.
Intel Core 2 Duo E6600
MSI P965 Platinum (BIOS 1.2)
2 GIGS Team Xtreem DDR2-800 (4-4-4-10)
Gecube X1900XT (Catalyst 6.12's)
Hitachi SATAII (4 x 250GIG + 2 x 500GIG)
Cooler Master Real Power Pro 850WATT
Zalman CNPS9500LED HSF
WindowsXP SP2 + all the latest patches and hotfixes + .NET3
Intel Chipset Installation Utility 8.1.1.1010
Intel Matrix Storage Manager 6.2.0.2002
Realtek High Definition Audio 1.51
jmicro-1.17.07.06-whql
MSI Dual Core Center Version 1.0.2.6
BTW - why does the DCC want to install itself in my ATI driver folder ?
This IS the most frustrating motherboard I've ever used. And I've used a lot

My question would be why are you using Dual Core Centre at all?
* it is well know that it is a poor utility
* Overclocking better off done in the bios.
* Use Coretemp or SIV 3.14 for monitoring temps, and CPU-Z.
http://www.xtremesystems.org/forums/showthread.php?t=103638
http://www.techspot.com/downloads/1605-siv.html
* Use HDTach 3 to test your read speeds on your hdd. SATA I 150, SATA II 300, Intel RAID over 300mb.
Sorry, but I do not own your motherboard so I am not that familiar with the ins and outs of it, just offering some general information.
Gaucho

Similar Messages

Is there any way to monitor CPU temp without Dual Core Center

I hate Dual Core Center it has done nothing but lock my system up is there any alteranative to monitor CPU temp/Fan speed

Quote from: Maesus on 21-March-07, 23:34:06
I use speedfan... but for Core 2 Duo, I don't think I have to worry about the CPU temp anymore... they are really coooooooooooooll
Does anybody have an idea what the optimal temperature range for core duo cpu:s are? I used to have an Athlon XP, which was typically 65 °, now the my E6600 is running at 35-40 ° [celsius]. But where's the critical temperature where it burns?

Dual Core Center working in Vista but not XP on a dual boot system?

Hi All.
My system specs are:
Dual Boot Windows XP Pro SP2 and Windows Vista Ultimate
Temps for CPU in Vista averaging at 43 - 45 degrees in XP averaging at 38 to 42 degrees. It never seems to go much higher than 53 on Load.
Thermaltake Soprano tower
MSI K9N Diamond Motherboard
Hiper 580watt Modular PSU
4GB OCZ Gold 6400
AMD X2 6000+
2 X 300gb diamond maxtor 10 HDD
MSI Geforce 7800gt
DVD Rom
LG Dual Layer DVDRW+/-
I am running a dual boot system with Windows XP Pro SP2 on one partition and Windows Vista Ultimate on the other. Both operating systems seem to be operating properly except for an odd situation with Dual Core Center. In Windows XP Dual Core Center only indicates the Mainboard properties - No VGA, whereas on Windows Vista Ultimate Dual Core Center indicates both VGA & Motherboard properties. I have installed MSI Nvidia drivers for the Graphics card & also tried straight Nvidia drivers for the card but it has made no difference VGA will not show up in XP. Yet on installing Dual Core Center on the Vista partition VGA showed up immediately. Can anyone help.
If anyone can come up with an answer to this it would be a real help.
Many Thanks in advance.

have you try to update/install the dual core driver from amd?

MSI P35 NEO & dual core center problem

hi, i have a problem with my motherboard msi, Bios 1.2 and the dual core center 2.0.0.8 ,since days ago, the msi dual core center 2.0.0.8 so many times shows fan speeds alerts false alarms from the cpe temp, for that reason, i upgraded the appl to 2.0.1.6 ( the last),i set the oc level to 25% like with the older version, but time later the pc crash and put a black crash screen and it dont let me to overclock my cpu , i get back to 2.0.0.8 but the fan alarm dont stop, and i dont know if the newer version fix this problem
any help?
sys specs
msi p35 neo bios 1.2
core 2 quad q6600
2 gb value ram
psu duck

right, but i like to use msi dual core center, because i dont like to have the pc overclocked all the time, anyother suggestion for this?
thanks for the reply

NX7600GT Diamond Plus and fan speed with Dual Core Center

I just got a NX 7600GT Diamond Plus for my HTPC. I noted that Riva Tuner and other utilities are not able to control the fan speed of the video card. The only way one can control the fan speed is via Dual Core Center and 3D Core Cell. The problem is that the default setting for fan speed on Dual Core Center is too high and clearly audible. How can I get Dual Core Center to start with user defined presets during windows start-up/boot-up ?
What I want to do is to put the fan into 'SILENT' mode automatically during Dual Core Center start-up. Any ideas / suggestions ?

Quote from: BOSSKILLER on 17-January-07, 00:44:11
well no need to edit manually, MSI provided everythink in easy way from core center.
select advanced mode, create your custom profile pickup your desired settings,(setup maximum FAN RPM via buttons) and save it to custom profile.
suggest you to read help section from program.
So the custom profile is automatically loaded every time DualCoreCenter starts up ? Maybe there is something wrong with my install of DCC, I cannot get it to load custom profiles automatically upon startup. I can save the changes to say "User Profile 1" but the profile active on startup always is the "default" profile ...

DKA790GX Platinum, have problem with changing FSB in Dual Core Center

Hello guys, freshblood is here,
I change fsb in Dual core center, but unfort. core temp and CPUZ don't reflect any changes.

I agree. The BIOS gives you better control with better options.
Quote from: Jack the Newbie on 26-January-09, 02:14:05
Dumb MSI Dual Core Center. It is not the best tool ever developed. Use the BIOS for overclocking your system.

P965Neo-F V2 MSI Dual Core Center Support

Hi.
I brought MSI P965Neo-F v2 MB and MSI 7600 GT graphic card, now i installed Dual Core Center and it shows only Graphic card info, is it some bug? i tryd core center and it showd me alot wrong info, like no cpu fan, sys fan 5k rpm and +12v was 24v. Anyone else having trouble whit DualCoreCenter utility?

all other utilitys lie, 12v shows 24v, 3v shows 0,12, cant be real, and no fans at all:D

Dual Core Center doesn't work at all.

My mobo is P35Neo2-FR. Cpu is C2D E4600. I didn't overclocked it. WinXP professional 32BIT is installed.
.Net 2.0 is also installed.
From some time, I cannot launch Dual Core Center program. When I double-click the Dual Core Center icon,
There is nothing to be launched. I could not understand why the program suddenly didn't work.
Please let me know the solution to successfully launch Dure Core Center program.

yeah! my only experience with DCC is,... after it runs, it straight away turn on the siren, annoy the whole PC, and after 10 seconds, it shuts down my PC! That's the big annoyance already. The next time I reboot, I quickly terminate it from runnign longer, and straight away remove it from my PC. don't even bother to figure out where the alarm settings is.

P6N SLI V2 problem with "dual core center"

I have the P6N SLI V2 with E4400 and 7600gt running XP pro sp 2.
after installing and running MSI's "dual core center" (including .Net framework) I only have the "VGA" option enabled, the "MB" option is disabled as well as the D.O.T option. I tried uninstalling and reinstalling as well as downloading the latest version, but I have the same problem. I get no MB options at all (like no cpu temp, fan speed, core speed etc.). I didn't make any changes to the BIOS yet (other than changing the boot sequence), and ideas?

Quote from: nautica on 15-July-07, 13:19:02
and ideas?
A great one.
Don't use MSI's utilities. Anyone here will tell you that.

MSI Dual Core Center

Dual Core Center is a great tool but one thing that is annoying me is the FAN speed detector. I didn't plug fan into one of the header so Dual Core Center's alarm will be on all the time. Is there anyway to disable the alarm?

Quote from: Salman on 19-November-07, 11:58:29
no need to use dual corecentre friend ...use coretemp
Kudos!
Finally got a program now to monitor my Q6600...and the temps look nice I think:
Core#0: 46°
Core#1: 45°
Core#2: 43°
Core#3: 39°
Tjunction is set to 100°

Help...MSI 975x Platinum PUE + Dual Core Center + MSI 7900 GTX

I have an MSI 7900GTX on my MSI975x MB. I've read the dual core center manual and it states that Dual Core Center can also monitor VGA temps and whatnot as long as it's an MSI Graphics card. Currently I am unable to monitor VGA stats on Dual Core Center due to the fact that it is greyed out. Can anyone tell me how to activate this feature?

To know you GPU temps, you can access it via Display Properties for nVidia cards and for ATi cards, you can view via the ATI Control Panel.

Dual Core Center- MSI 8800 GTS and MSI P6N SLI Platinum.

I have both the MSI 650i MOBO and the MSI 8800 GTS vidcard. When using an Asus P5B Dlx MOBO and this vidcard, Dual Core Center was installed and displayed the information for the videocard and allowed a mild OC. Now with both MSI products in the case, Dual Core Center only displays the information on the MOBO-- no 8800 GTS information. The tab at the top for the VGA does not bring up anything. ??? I have tried installing the version on each one of the disks that came with each piece of equipment again and it doesn't seem to make a difference, it doesn't work. I downloaded the most recent version of the utility from the MSI site and still get only the MOBO information. How do I get the display for the video card?
Or since the MSI utilities typically are listed on the forums as not being the greatest, what else can I/should I be using instead?
{I put this in the MOBO forum too as it hits both areas...}

Found that AtiTool (latest beta) works on the 8800's. The "find max core" and "find max memory" don't work perfectly though, as they start the overclock and then are supposed to check for errors; they are supposed to stop the adjustment upward when they encounter erros and come back down...... AtiTool just kept cranking it up, although you could visibly see the little 3D screen artifact all over the place. But It gave a good starting place to do the OC manually and then go run the scan for artifacts and errors manually. AtiTool listed the stock core at 513 and stock memory at 792. I was able to take the core up to ~644 and the memory up to ~877. I backed these off some (as you can't run both at max!) and it looked stable at 630 core, 860 memory. Ran through both 3DMark 05 and 3DMark06 without a hitch. Need to check it out with some extended gameplay now.

P6N platinum and Dual Core Center

Hi,
When I attempt to use the Dual Core Center I get an error:
0xc0000005 Program failed to start, press OK to end.
I have updated the BIOS, Dual Core Center, Nvidea drivers, .NET framework etc no change.
Tech support told me that the Dual Core Cell chip on the board was bad so I got a second board without change.
I really don't care about the OC'ing features, I want to monitor temps and control fans.
I have tried Speedfan, it does not control the fans plugged to the mobo headers. Neither does Nvideas tool (Nview).
Infact nothing I have tried will control the fans.
Suggestions?
(Aside from returning both boards and going with a different brand)
Components List:
MSI P6N SLI Platinum LGA 775 NVIDIA nForce 650i SLI ATX
EVGA 256-P2-N740-LR GeForce 8500GT 256MB GDDR2 PCI Express x16
FSP Group (Fortron Source) AX450-PN ATX12V 450W Power Supply
Intel Core 2 Duo E6600 Conroe 2.4GHz LGA 775 Processor
Crucial 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 667
SAMSUNG SpinPoint T Series HD403LJ 400GB 7200 RPM SATA 3.0Gb/s
SAMSUNG DVD burner
MAXTOR 40GB HDD (PATA, moved frmo old PC for transfer of files)
USB Wireless Network
Windowx XP Home, SP2

Quote from: Maverick0984 on 20-July-07, 22:44:21
I think the program is horrible...don't waste your time with it.
If it works, good! It doesn't tend to fuss.
But if it doesn't work, uninstall it.
CoreTemp and Everest like Jack says are the best.
Fan speeds however your out of luck with. You can submit a report through Speedfan to the author however.

Dual Core Center- MSI P6N SLI Platinum and MSI 8800 GTS 640

I have both the MSI 650i MOBO and the MSI 8800 GTS vidcard. When using an Asus P5B Dlx MOBO and this vidcard, Dual Core Center was installed and displayed the information for the videocard and allowed a mild OC. Now with both MSI products in the case, Dual Core Center only displays the information on the MOBO-- no 8800 GTS information. The tab at the top for the VGA does not bring up anything. ??? I have tried installing the version on each one of the disks that came with each piece of equipment again and it doesn't seem to make a difference, it doesn't work. I downloaded the most recent version of the utility from the MSI site and still get only the MOBO information. How do I get the display for the video card.
Or since the MSI utilities typically are listed on the forums as not being the greatest, what else can I/should I be using instead?
{I'll put this in the graphics forum too as it hits both areas...}

Running a P6N SLI Platinum and a MSI 7900GTO with Dualcorecenter 2004 and everything is ok.
Never installed any driver from the MSI CD which comes with the board or graphics card. All drivers are downloaded
from Nvidia.
Maybe the 8800 series is not supported yet.

MSI P6N SLI Platinum, Dual Core Center and Mem Voltage

I set my memory voltage for my Corsair sticks to 2.0 just as TheRamGuy at Corsair's House of Help forum had suggested. However, in Dual Core Center, it reports that the Memory voltage is at 2.7!!!!.
I seem to vaguely remember some threads somewhere in one of the forums about the MSI boards frying higher voltage memory, and so am concerned to say the least.
Or is there a better program that can display the Memory voltage?? Or do I believe the Dual Core Center readings?

Quote from: NovJoe on 13-April-07, 16:01:41
CPUID would let you know if your RAMs are running at the correct timings.
You can try SisoftSandra or Everest to check on the detected voltage in Windows.
OK, I've downloaded both SiSoftSandra and Everest. I don't see anywhere where these programs report/measure a memory voltage. One one screen, it will report on the SPD settings for the memory and lists the rated RAM voltage "setting", but not the actual juice going to it.
Oh, well. Must just mark it off as one less thing to worry about

Dual Core Center hates me

Similar Messages

Maybe you are looking for