Dual Core Center- MSI 8800 GTS and MSI P6N SLI Platinum.

Question

I have both the MSI 650i MOBO and the MSI 8800 GTS vidcard. When using an Asus P5B Dlx MOBO and this vidcard, Dual Core Center was installed and displayed the information for the videocard and allowed a mild OC. Now with both MSI products in the case, Dual Core Center only displays the information on the MOBO-- no 8800 GTS information. The tab at the top for the VGA does not bring up anything.  ??? I have tried installing the version on each one of the disks that came with each piece of equipment again and it doesn't seem to make a difference, it doesn't work. I downloaded the most recent version of the utility from the MSI site and still get only the MOBO information. How do I get the display for the video card?
Or since the MSI utilities typically are listed on the forums as not being the greatest, what else can I/should I be using instead?
{I put this in the MOBO forum too as it hits both areas...}

Answer 1

Found that AtiTool (latest beta) works on the 8800's. The "find max core" and "find max memory" don't work perfectly though, as they start the overclock and then are supposed to check for errors; they are supposed to stop the adjustment upward when they encounter erros and come back down......    AtiTool just kept cranking it up, although you could visibly see the little 3D screen artifact all over the place. But It gave a good starting place to do the OC manually and then go run the scan for artifacts and errors manually.  AtiTool listed the stock core at 513 and stock memory at 792. I was able to take the core up to ~644 and the memory up to ~877. I backed these off some (as you can't run both at max!) and it looked stable at 630 core, 860 memory.  Ran through both 3DMark 05 and 3DMark06 without a hitch. Need to check it out with some extended gameplay now.