Dual Core yet only one is working win8.1
Since a couple of days ago i've learn a trick which consisted in going to msconfig , Boot , Advanced settings and selecting 2 processos which would make my computer faster.
I came to notice that my computer started getting slow , when i started "searching" for the cause i saw that my computer was working on 1 of the 2 cores that it has.
Since then my win 8.1 has been working nearly always at 100% cpu usage , how can i put the dual cores back to usage?
Hi,
Please refer to the screenshot below to check your system boot configuration settings, make sure it's same with the picture.
After that, please restart your computer to check if the problem resolved, if not, please feel free let me know.
Roger Lu
TechNet Community Support
Similar Messages
-
G5 1.8 dual core recognizes only one core
I recently bought a dual core G5. The G5 isn't recognizing one of the cores. Any ideas how to fix it?
I don't usually have this problem, but I'm having it now with a project I'm doing while working off of Access Music's virus logic template. I wonder if there's a setting or something. One core is maxxing out and crashing the system, and the other is completely unused. I'd like an answer .
-
When I plug in headphones or use audio jack only one speaker works.
I have an iphone 4g. When I plug in headphones only one side works. When I plug into my car audio jack...only one car speaker works.
There is only one speaker, the other side is the microphone.
-
It seems I cannot use Sky Go even if I use Firefox. The only one that works is IE 11.
I was using Google Chrome, but it seems they do not support Silverlight which Sky Go use. I was told that Firefox would work. It doesn't. The only one that works is Internet Explorer 11, which is very slooow. Why can't I use Firefox to view Sky Go?
My Sky homepage. If I want to watch cricket say, it come up with ' sky go unavailable at this present moment'. If I log on to my IE 11, sky go works Ok. I have the Silverlight add-on or plug-in whatever you call it.
Still no joy in Firefox. -
I've placed two Edge oam files in to a dps doc and only one will work, can anyone help?
Hi, I've created one animation and tested it in dps and it works fine. I've repeated this and my second animation is fine also, but when I have them in the same doc only one will work.
Has anyone had this problem or know of any suggestions?
I'm using Edge CC and Indesign CC with the latest viewer release on my iPad.
ThanksHi, yes I'm using the most up to date tools (v27). I've tried also setting the delays to various different increments, this doesn't make a difference.
Although this is an old post I wonder if it is the same issue - http://forums.adobe.com/message/5615731#5615731
Thanks -
Why does only one headphone work on my ipod. it is not my headphones.
when i plug my headphones into my ipod only one will work, unless i pull it out a little bit. i just bought a 70 dollar pair of wireless headphones and only one will work. i know it is not the headphones it is definetly the ipod. any way to help?
Call Apple.
-
HT2995 Only one speaker works when playing music. Is this normal?
Only one speaker works when playing music. Is this normal?
This being the Mac mini forum, I naturally presumed you were asking about a mini. But in any case, there's only speaker in an iPhone as well.
Regards. -
Why does only one headphone work when i listen to music? I have to hold the base of the cord in a certain position for it to work, it does this with all headphones i try, what do i have to do?
You can try cleaning the headphone jack. However, I suspect that th headphone jack needs replacement.
Apple will only exchange your iPod for a refurbished one for this price.
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I'm not happy at all with my Ipad I only had it for a few monthes and I found a lot of things wrong with it like it wont charge only one earbud works when i watch videos or listen to music but both work when I'm facetiming
Contact Apple to take advantage of your standard 1 year warranty.
-
Dual Core, but just one recognized [SOLVED]
In the last days I had problems with my computer just going off randomly after some time... As I found out the CPU fan was too loose... Now I somehow fastened it so it seems to work normally now.
Today I noticed (I'm not sure whether it's now the first time or I just didn't see it) that on booting I see just one Arch logo, although I have a Dual Core processor and normally there are 2 logos... I checked whether GRUB has the option nosmp set which was not the case. cat /proc/cpuinfo gave me just one core.. Then I tried to boot the arch live cd (the 2008.06) and cpuinfo had both there!
The BIOS says that there are still 2 as well... so my first idea, that one core is broken because of overheating seems to be wrong, it's impossible that just one core breaks, doesn't it?
So my question is - how do I get my core to be recognized again? I have the new 2.6.29 kernel.. could this be the problem?
My second question is - the information about launching daemons on booting appears AFTER showing the login prompt (I login via tty) [EDIT: This had to do with the OpenNTPD daemon...]
Last edited by icetonic (2009-04-16 15:46:27)Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x7ffc0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007ffc0000 (usable)
modified: 000000007ffc0000 - 000000007ffce000 (ACPI data)
modified: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
modified: 000000007fff0000 - 0000000080000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fef00000 (reserved)
modified: 00000000ffb80000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 7ff24000 - 7ffafb9e
Allocated new RAMDISK: 00011000 - 0009cb9e
Move RAMDISK from 000000007ff24000 - 000000007ffafb9d to 00011000 - 0009cb9d
ACPI: RSDP 000FB800, 0024 (r2 ACPIAM)
ACPI: XSDT 7FFC0100, 0054 (r1 HYRSLP HYRSLPTB 9000706 MSFT 97)
ACPI: FACP 7FFC0290, 00F4 (r3 A_M_I_ OEMFACP 9000706 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 7FFC05C0, 659A (r1 A0904 A0904000 0 INTL 20051117)
ACPI: FACS 7FFCE000, 0040
ACPI: MCFG 7FFC0400, 003C (r1 A_M_I_ OEMMCFG 9000706 MSFT 97)
ACPI: SLIC 7FFC0440, 0176 (r1 HYRSLP HYRSLPTB 9000706 MSFT 97)
ACPI: OEMB 7FFCE040, 0060 (r1 A_M_I_ AMI_OEM 9000706 MSFT 97)
ACPI: HPET 7FFC6B60, 0038 (r1 A_M_I_ OEMHPET0 9000706 MSFT 97)
ACPI: SSDT 7FFC6BA0, 0206 (r1 A_M_I_ POWERNOW 1 AMD 1)
1159MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 005ac000 - 005b2f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00005a8584] TEXT DATA BSS ==> [0000100000 - 00005a8584]
#4 [00005a9000 - 00005ac000] INIT_PG_TABLE ==> [00005a9000 - 00005ac000]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000011000 - 000009cb9e] NEW RAMDISK ==> [0000011000 - 000009cb9e]
#8 [00005ac000 - 00005b3000] BOOTMAP ==> [00005ac000 - 00005b3000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007ffc0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffc0
On node 0 totalpages: 524111
free_area_init_node: node 0, pgdat c0431600, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2320 pages used for memmap
HighMem zone: 294578 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x508
ACPI: No APIC-table, disabling MPS
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520015
Kernel command line: root=/dev/disk/by-uuid/206cc51d-0ece-4693-a6cc-156428ba637f resume=/dev/sda5 ro vga=792 noapic
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2109.362 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073012k/2096896k available (2369k kernel code, 22620k reserved, 1056k data, 356k init, 1187592k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc045f000 - 0xc04b8000 ( 356 kB)
.data : 0xc03507cf - 0xc0458a88 (1056 kB)
.text : 0xc0100000 - 0xc03507cf (2369 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4220.50 BogoMIPS (lpj=7031206)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 10k freed
ACPI: Core revision 20081204
ACPI: Checking initramfs for custom DSDT
ACPI Error (dswload-0239): Invalid type (Alias) for target of Scope operator [\._P] (Cannot override) [20081204]
ACPI Exception (psloop-0227): AE_AML_OPERAND_TYPE, During name lookup/catalog [20081204]
ACPI: setting ELCR to 0200 (from 8c00)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4220.50 BogoMIPS).
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc3f]
pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xdbfff000-0xdbffffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xdbffec00-0xdbffecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0xdbff8000-0xdbffbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:07.0: reg 10 32bit mmio: [0xdbffd000-0xdbffdfff]
pci 0000:00:07.0: reg 14 io port: [0xd480-0xd487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0xd400-0xd407]
pci 0000:00:08.0: reg 14 io port: [0xd080-0xd083]
pci 0000:00:08.0: reg 18 io port: [0xd000-0xd007]
pci 0000:00:08.0: reg 1c io port: [0xcc00-0xcc03]
pci 0000:00:08.0: reg 20 io port: [0xc880-0xc88f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xdbffc000-0xdbffcfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:04.0: transparent bridge
pci 0000:02:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f]
pci 0000:02:00.0: reg 30 32bit mmio: [0xdefe0000-0xdeffffff]
pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
pci 0000:00:09.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB2] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LMAC] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs *15)
ACPI: PCI Interrupt Link [LSA1] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 08, should be 03 [20081204]
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: ioport range 0xa30-0xa37 has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x500-0x57f has been reserved
system 00:06: ioport range 0x580-0x5ff has been reserved
system 00:06: ioport range 0x800-0x87f could not be reserved
system 00:06: ioport range 0x880-0x8ff has been reserved
system 00:06: ioport range 0xd00-0xd7f has been reserved
system 00:06: ioport range 0xd80-0xdff has been reserved
system 00:06: ioport range 0x2000-0x207f has been reserved
system 00:06: ioport range 0x2080-0x20ff has been reserved
system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:06: iomem range 0xffb80000-0xffffffff has been reserved
system 00:06: iomem range 0xff300000-0xff3fffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: ioport range 0x230-0x23f has been reserved
system 00:0b: ioport range 0x290-0x29f has been reserved
system 00:0b: ioport range 0xa00-0xa0f has been reserved
system 00:0b: ioport range 0xa10-0xa1f has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: IO window: 0xe000-0xefff
pci 0000:00:09.0: MEM window: 0xdc000000-0xdfffffff
pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: disabled
pci 0000:00:0b.0: MEM window: disabled
pci 0000:00:0b.0: PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: IO window: disabled
pci 0000:00:0c.0: MEM window: disabled
pci 0000:00:0c.0: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 mem: [0x0-0x0]
pci_bus 0000:01: resource 1 mem: [0x0-0x0]
pci_bus 0000:01: resource 2 mem: [0x0-0x0]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdfffffff]
pci_bus 0000:02: resource 2 mem: [0xc0000000-0xcfffffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 mem: [0x0-0x0]
pci_bus 0000:03: resource 1 mem: [0x0-0x0]
pci_bus 0000:03: resource 2 mem: [0x0-0x0]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 mem: [0x0-0x0]
pci_bus 0000:04: resource 1 mem: [0x0-0x0]
pci_bus 0000:04: resource 2 mem: [0x0-0x0]
pci_bus 0000:04: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 558k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1239902785.206:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1732
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:09.0: setting latency timer to 64
pcieport-driver 0000:00:09.0: irq 16 for MSI/MSI-X
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: irq 17 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: irq 18 for MSI/MSI-X
vesafb: framebuffer at 0xdd000000, mapped to 0xf8080000, using 6144k, total 14336k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:b470
vesafb: pmi: set display start = c00cb4d3, set palette = c00cb52e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
IO APIC resources could be not be allocated.
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 356k freed
SCSI subsystem initialized
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
libata version 3.00 loaded.
pata_acpi 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
pata_acpi 0000:00:08.0: setting latency timer to 64
pata_acpi 0000:00:08.0: PCI INT A disabled
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATAPI: PHILIPS SPD6005T, P1.0, max UDMA/66
ata1: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11)
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM PHILIPS SPD6005T P1.0 PQ: 0 ANSI: 5
ata2: port disabled. ignoring.
sata_nv 0000:00:08.0: version 3.5
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 15
ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 15
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD3200AAJS-00VWA0, 12.01B02, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda4 < sda5 sda6 sda7 >
sd 2:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
udev: starting version 141
loop: module loaded
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver rt73usb
fuse init (API version 7.11)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.2.0 (interface 0x000a0009).
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
IT8712 SuperIO detected.
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 10, io mem 0xdbffec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 11, io mem 0xdbfff000
Driver 'sr' needs updating - please use bus_type methods
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 11 (level, low) -> IRQ 11
forcedeth 0000:00:07.0: setting latency timer to 64
sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
Linux agpgart interface v0.103
usb 1-4: new high speed USB device using ehci_hcd and address 2
input: PC Speaker as /devices/platform/pcspkr/input/input4
lp0: using parport0 (interrupt-driven).
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 3
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1b:fc:fc:c3:29
forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
usb 1-5: configuration #1 chosen from 1 choice
usb 1-4.1: new high speed USB device using ehci_hcd and address 4
usb 1-4.1: configuration #1 chosen from 1 choice
nvidia: module license 'NVIDIA' taints kernel.
ppdev: user-space parallel port driver
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
Error: Driver 'pcspkr' is already registered, aborting...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
wmaster0 (rt73usb): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 11 (level, low) -> IRQ 11
HDA Intel 0000:00:05.0: setting latency timer to 64
psmouse serio1: ID: 10 00 64<6>wlan0 (rt73usb): not using net_device_ops yet
Registered led device: rt73usb-phy0:radio
Registered led device: rt73usb-phy0:assoc
Registered led device: rt73usb-phy0:quality
usb 1-4.3: new high speed USB device using ehci_hcd and address 5
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 11
nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 11 (level, low) -> IRQ 11
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
usb 1-4.3: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device USB Video Camera (0471:0334)
input: USB Video Camera as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.3/1-4.3:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
EXT3 FS on sda7, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3919820k swap on /dev/sda5. Priority:-1 extents:1 across:3919820k
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:1: Attached scsi generic sg3 type 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:2: Attached scsi generic sg4 type 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:3: [sde] Attached SCSI removable disk
sd 4:0:0:3: Attached scsi generic sg5 type 0
usb-storage: device scan complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
rt73usb 1-4.1:1.0: firmware: requesting rt73.bin
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:14:7f:83:b1:bb
wlan0: authenticated
wlan0: associate with AP 00:14:7f:83:b1:bb
wlan0: RX AssocResp from 00:14:7f:83:b1:bb (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
IRQ 11/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs -
I have 2 thunderbolt displays and have had them daisy chained for months where I only would plug one into my macbook pro 15" retina and both displays have worked great. The other day I moved one of them into the conference room, connected also a HDMI cord to a projector to do some work with staff on software design.
I brought my thunderbolt back into my office and plugged it back into the other thunderbolt dispay, then plugged the other display back into my macbook and started it up and now I can only get one to work daisy chained. They both work great independantly or if both of them are plugged into my macbook pro, but not daisy chained any longer.
Is there a setting I need to look at to maybe reset so that my macbook pro will use both thunderbolt displays daisy chained?
Thanks for anyones advice and sharing any similar issues and how you fixed the issue.Hi there,
The first thing that I would recomend is resetting the PRAM on your portable.
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/ph11243
If the issues persist, then you may need to force the device to detect displays.
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/ht5369
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
- Griff W. -
Why is 1080i the only one that works for my slideshow.
Well... I'm getting to my breaking point.
First my system.. Mac Pro 2.66 2x300gb raid 0. x1900 ACD 30
5gb Ram
I have read many many posts.. but I still need your help.
I have found that the only thing that gives me a marketable slideshow in terms of quality images is to make a slideshow in imovie under 1080i.
The problem with this is that it really really slows my computer down, and I don't want to do this with a slide show of about 150 images per client, and then have wait more for transistions.
Shouldn't I start a new slideshow in "DV" setting for a 4x3?
I have tried reducing res from 10.2 mp to a 1024x??? settting for images (depending on orientation). All I seem to lose here is a bit of sharpening as I reduce the image resolution, which makes sense if I understand correctly.
So... Where to go from here.
I read the posts.. and have determined that I can use Photo to move (which I have) to make clips and import them into Imovie. Again, a slow process as each clip has to be done seperatly. Is there another way with PTM, because it does render the best Ken burns effect I have seen. Again 150 images is too long to wait to make a slide show of a wedding, not cost effective for me.
Hope someone can help.Anyone??
When I make a movie in 1080 or 720.. it takes alot of resources and slows things down.
Just wondering why choosing those options are the only ones that seem to work
I really need to get it into 4x3 format too. -
HD slideshow is the only one that works for me.. WHY??
I have a new mac pro with lots of hd and ram 5GB.. so I don't think its my system.
What I need to know is that I can make an acceptable slideshow if
1) I lower the resolution of my photos from 3884x2600 to about 1024x1024
2) I create a imovie 720hd or 1080i HD.
ANY other format creates a lousy final picture quality when viewed on the TV. I get a shimmering, but not so noticible jaggies as some have posted. If I keep the photo still and not use KB.. the still images are ok, but not fantastic. The KB kills them. This seems opposite of what I have read of the bug in imovie6.
Can anyone explain why if I use the HD formats for Imovie the photos turn out ok?
I would like to keep them in a 4x3 format but can't if I use the HD formats. Is there a way to make it 4x3 after?
Anyway.. I have done a lot of testing and this is the best I can get so far.Anyone??
When I make a movie in 1080 or 720.. it takes alot of resources and slows things down.
Just wondering why choosing those options are the only ones that seem to work
I really need to get it into 4x3 format too. -
Bluetooth acting very strange. Only one device works at a time.
HI,
I have a bluetooth device in my macmini. And also now have airport.
But it seems only one device can connect at a time.
But if a keep turning the 2 dvices ona nd off and mucking around with them then eventuly both work at the same time. One being an apple wireless KB the other a macmice wireless mouse. i have tried other mouses but same result.
Was wondering if anyone would know why this is doing this and mayb a fix.
any help would be great.jpalan wrote:However, flash still seems to hijack everything.
Instead of guessing, start playing mplayer and some flash source (youtube or whatever) and post the output of 'fuser -v /dev/snd/*'.
Is your mplayer using alsa? 'cat ~/.mplayer/config' might have the answer (if you use the config) or just check mplayer output:
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
See that
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
- I have configured mplayer to use alsa. -
Only One LED works when shuffle turns on
hi, i just bought my 2nd gen ipod shuffle, i turned it on to find only one LED shows the battery status. Both LEDs work for everything else apart from when i turn it on.
Is this a problem or is it just normal?
Thanks in AdvanceNot to worry... it's normal behavior.
Maybe you are looking for
-
Hello! I bought an ipod nano 7th today. I actually loaded via my mac for at least 45 min. I wanted to watch a podscats and the screen went black! How can I resolve the situation?
-
Trouble Forcing an Application to Run
I have a bit of a problem I'm having trouble solving. I'm trying to force an application (McAfee Total Protection's silent installer) to run at startup. So I created an application object and associated it with a test machine, also checking "Force Ru
-
Image in CS4 looks lighter than in CS3?
I just started to use CS4, set up all of my color preferences and opened up an image. I thought that it looked a little bit lighter than what I remembered so I opened up the same image in CS3 and it does look different. The 3/4 tones to the shadows a
-
Error while launching Ps Cc after the last adobe update
Hello, i've used for months Ps Cc together with lightroom 5 on window 8 without any troubles. But after the last creative cloud and photoshop updates i can't even start the software. Just as soon as I doubleclick the ps shortcut an error window ale
-
Login failure without feedback
I have installed OiD 2.1.1 successfully with its own database. from the prompt i ran the following commands to run OiD server : oidmon connect=second sleep=10 start oidctl connect=second server=OIDLDAPD instance=1 start after that i made sure that th