Dual Displays (Dual Monitors)

I cannot seem to find this information anywhere.
Can anyone tell me if LR supports dual displays? That is the develop screen on one screen and library on the other?
Cheers

This is the way I work: Don't use Lightroom in a full screen window but enlarge the Lightroom Window from the leftside of monitor one into the right-hand side monitor, but just the right panel visable on monitor 2. If you hit the F6 and F7 keys the left- and bottompanels disappear and you have allmost a full screen to work with, and the devolop panel remains on the richt-hand side on monitor 2. Just try, it works complete well at me. gr. Jaap <[email protected]> schreef in bericht news:[email protected].. > > > I cannot seem to find this information anywhere. > > > > > You probably didn't expect to find the topic in the "Lr Features requests" > forum ...<g>... > > Can anyone tell me if LR supports dual displays? That is the develop > screen > on one screen and library on the other? > > > > > The answer is 'no', but you can believe Adobe has already heard an earful. > I suspect it'll come ... eventually. > > Part of the surprise and criticism has come from me .. but I have to admit > Lr's interface to a single monitor is one of the best I've seen. > > cheerios :o)

Similar Messages

Dual Display, 2 Monitors - Extended Desktop

Hello Everyone:
There isn't a clear cut answer or solution in connected a Macbook Air to 2 external monitors in an attempt to create an extended desktop. I have read older posts that it's either doable or not doable. My questions are the following:
-Is it possible to connect a new Macbook Air to 2 external monitors for extended desktop purposes?
-Some users have reported lag issues (mouse dragging , delays, etc.). Will this happen for sure with a Macbook Air or is it a monitor issue?
-What's the best non-Apple monitor brand that would work best with a Macbook Air for dual display purposes? I've read that Dells have a problem in this regard.
-What would be the advantage or disadvantage of using a dock station in setting up a dual display environment? Would this add to the lag, latency factor?
I'm thinking of investing in a new Macbook Air, but I want to make sure I dont end up with silly issues - such as latency, monitors, etc.
Thank you for all your help and advise.
Best,
G.

Yes, extended desktop works with monitors set to differant resoultions. the Monitors pref pane allows you to select relative arrangements and rez of all monitors composing the extended desktop.
personally I run a dell CRT at 2304 X 1728 @ 60Hz along with an NEC 6FG a 2048 X 1280 @ 60Hz off a radeon 9800pro on an MDD.

Wacom tablet on dual display dual card setup...

...and the cards are as follows, one Geforce GTX 460 (nvidia driver), one Radeon x1650 (radeon driver) As such, I have to use Xinerama and not RandR for my dual display setup. I have configured the driver to use my main display (Dell CRT on GTX 460) and the cursor shows up where it's supposed to, but when I draw, the cursor "splits" into two, the actual cursor, and the drawing cursor. The regular cursor moves as if it's on my main display, but the drawing cursor spans both desktops.
I've tried all kinds of things to make it work, no luck though.
xsetwacom set "Wacom Graphire4 6x8 stylus" Area 0 0 30408 12064
xsetwacom get "Wacom Graphire4 6x8 stylus" MapToOutput HEAD-0
Both of those commands produce the same result, which is shown in the video below.
xorg.conf
http://pastebin.com/d0TSwNrR
And a lovely video showing what I mean.
http://www.youtube.com/watch?v=YMGGehD81jM
Any help would be lovely.

MisterAnderson wrote:Honestly no clue how to help you, but I am interested in your setup. Are you using the proprietary drivers for your nvidia card and the opensource radeon for your ati? How did you get this setup working? I've been trying for ages!
If I remember correctly, I just used --nodeps and maybe --force when installing the nvidia driver, that way it didn't force me to uninstall the radeon driver when I install the nvidia driver. Then, look at my xorg.conf. there's no acceleration of any sort on the ati card, but I can use it for terminals and browser windows, text editors and the like. Can't watch flash videos on it though, and I don't think mplayer works on it either, I'm not at my arch box atm, so I can't verify that.
Also, as mentioned in my opening post, no composting either. The same setup works pretty good in Ubuntu with a similar config, but no compositing there either, Unity clones 1680x1050 of my main 2048x1536 display, can't split the desktops, and I just end up using Xfce4 because it handles Xinerma pretty well.. I have to turn off the compositing extension in the config on arch to get X to even start up.
:edit:
back in arch, should note that whenever I install a new package, I receive this warning. Everything still works tghough as I describes. And back on topic, anyone have any clue as to why my tablet behaves this way?
missing dependency for ati-dri : libgl=8.0.4
Last edited by RexMcLess (2012-10-02 19:58:03)

Dual display, 2nd monitor displays 3 of everything

I have ran 2 monitors before with no problems. Useing the lastest nVidia drivers with a Ti4200 128 I get 3 displays of everthing I put on the 2nd monitor. What I mean is when I slide a window over to the 2nd monitor it shows up 3 times. The device manager shows 4 monitors, the primary (Hitachi 751) and 3 default monitors. It doesn't mention the 15" NEC monitor that is my 2nd display. I have tried to uninstall them, but they keep coming back. I have unpluged the 2nd monitor and rebooted, no luck. There probably is some check box or setting that I am missing in the nVidia control panel.
I sure need some help,Thank You ..... VRB

Hi,
This is probably NOT the answer, but if all else fails...
I've encountered problems when connecting an LCD monitor to the VGA output of a video card which is primarily set up for PAL TV out - so the Vertical and Horizontal rates on the VGA are presumably derived from the PAL H & V rates (50Hz and 15625Hz - the latter might be doubled on the VGA). Anyway, most of the LCD screens I have tried in this combination give multiple horizontally displaced images. On the other hand, CRT (picture tube) monitors generally seem OK.
So you could try changing the refress rate or resolution of the 2nd output, and see if it makes a difference.
Having said that, I think the problem is more related to the way your system thinks there are 3 extra monitors attached - in which case I haven't a clue :(
Good luck!

How do I use dual displays to have a full screen app on one monitor and another full screen app or the desktop on the other?

How do I use dual displays to have a full screen app on one monitor and another full screen app or the desktop on the other?
I want to have my itunes visualizer on my TV which is connected via HDMI adapter, and still have access to full screen itunes and my desktop on the main display.
Any suggestions? App downloads that can do this? Please let me know.

You can't do it. This has been an issue since Lion.

Is it possible to run dual display monitors on a KVM switch between my mac mini and a PC desktop?

I have two 23" monitors utilizing DVI that I currently have plugged into my PC desktop. I'd like to purchase the mac mini and utilize the same monitors for both systems and switch back and forth between the two. So, I'm wondering if it's possible. The only two hangups I can anticipate is dual display capability on the mini (I expect that some adapter will be necessary), keyboard compatibility between the two systems, and finding a switch that will handle all the above. Any help would be greatly appreciated!!!!

I think this video could help you
http://www.youtube.com/watch?v=IYoC2teAbmE
Other question is the switch box, You will have eight income cables (4 video, 4 usb) and four output cables
http://www.showmecables.com/viewItem.asp?idProduct=10778
http://www.networktechinc.com/pdf/cat-kvmsplit-usb-hdmi.pdf

External Monitors Dual Displays not supported

External Monitors Dual Displays not supported!
Yikes!
Why do I download BUGGY BETA OS? When will I learn ? DON't DO IT!
(sorry for shouting...)
There are no short cuts, no work arounds, no simple solutions...only updates
Please Apple code monkeys ..tear down this problem.
Thanks.
I feel better already .
--Marconi

Try this: Use the [√]Mirror displays oprions, choose your resolution, then desect the [ ]Mirror displays.
It shouldn't supossed to be like this, but until they send an update, this workarround will work.

I have Two Monitors how do i enable dual display

I have two monitors hooked up to my G4 and they are displaying the same thing how do i enable dual display where i can pan between them? Thanks for your help I am using Os 10.3.9

Hi
I'm fairly certain your graphics card doesn't support it. As far as I'm aware, Apple only introduced Macs with stock graphics cards capable of supporting dual displays (spanned) when they released the QuickSilver model. The cards in earlier G4s (Gigabit Ethernet, Digital Audio) had multiple connectors so you could connect either an Apple ADC display or third party VGA display, but I believe they only mirror each other.
If you needed to support two independent displays at the time, I guess you went for one of the built to order graphics card options, or bought a second (PCI) graphics card.

Setting Photoshop monitor profiles when using dual displays?

I'm using a Macbook Pro connected to an Apple Cinema Display under OS 10.5.8. Both monitors are calibrated and I export from Lightroom to Photoshop in ProPhoto. The Photoshop working colour space is also ProPhoto so there is no mismatch there.
When in dual display mode I like to have my Photoshop application on the Macbook screen and the photo I'm working on shown on the Cinema Display. In fact, I couldn't work any other way because the laptop's screen is not at all suitable for precision work.
I noticed that when I send an image from Lightroom to Photoshop CS4 for further editing the colours were off in Photoshop. This lead me to check the monitor profile used by Photoshop and I saw it was using the Macbook Pro .icc profile. This seems to be used even if the image is displayed in the external display. Selecting the Cinema Display as "default" in ColorSync doesn't change the situation. As a result, the colours as displayed by Photoshop are incorrect.
The only "solution" I have found is to either go to System Preferences > Displays and select the external monitor as the principal one (which is inconvenient because it negates many of the advantages of using dual monitors) or setting the Cinema Display's .icc profile for the Macbook Pro as well (which makes it the one chosen by Photoshop but means I'm only working wiht one correctly calibrated monitor).
Is there a solution to this problem? Ideally I want to have both my monitors calibrated and Photoshop detect which one I'm using to view my photo. Failing that, I would like to have both monitors calibrated and "tell" Photoshop to use the Cinema Display as the principal monitor.I don't want .
Many thanks!

Thanks for your reply!
I'm not too worried about 10.6 because I'm not using it ( I reverted to 10.5.8 precisely because of the colour issues).
I don't really understand your reply. My problem is that if Photoshop uses my Mabook Pro profile as the "monitor profile" my pictures - as displayed on the Cinema Display - look different in Lightroom and in Photoshop. It's as if Lightroom is "aware" of which of the two displays is being used whereas Photoshop can only deal with one at a time. I would like to know if this analysis is correct and what I can do so that Photoshop displays my photographs the same way as Lightroom does on each of my two displays.

IMac Dual-display colour profiling on second LG monitor

Hey guys,
I just purchased a second screen for my imac to use dual display, im a graphic designer and really need the space. What is the easiest and best way of mirroring the colour setting of the iMac to my second screen without the use of 3rd party colour calibrating software?

Hi macboydesign
Welcome to Apple Discussions
Lots of practice!
Not included in the current lists there were a dozen other DYI profiles between the iMac and LG that were so bad, I had to delete them.
The following article is dated, but has some great tips and info:
http://www.computer-darkroom.com/colorsync-display/colorsync_1.htm
Oh' almost forgot to mention, uncheck that box "Show profiles for this display only" and try some of those sRGB and RGB profiles to see if you can get closer that away.
Dennis

Dual display color and other related issues...

I have posted this on painter forums, though some of the issues coming together here are directly related to issues w/ Snow Leopard and dual displays. Thought I would try here....
This is so bizarre. When I ever I run P11(I think this is going on in P10 too?) w/ the OS X (snow leopard, 10.6.2 on quad core Intel Xeon Mac Pro, 10 GB of RAM) menu bar on my Eizo(making it the main display), and the Apple Cinema display left as the #2 monitor, I get very annoying brush cursor artifcats left randomly on the Eizo screen after strokes. One cannot predict when the cursor will leave it's gray "marks", but it will do it, sometimes 5 strokes in a row, sometimes after 15 strokes or so? If I move my brush back over them, or change the image percantage view, they vanish, obviously new ones coming back, as I work.
However I put the OS menu bar on the AC display, yet work back on the Eizo, this does NOT happen. No cursor artifacts. Well, at least I can summon the issue
The reason I am doing this is Snow Leopard has bad color issues w/ dual displays (well documented, much to Photoshop CS4 users frustrations, and mine). Apple needs to fix it... but for me to see the right color on the Eizo(this is my main color and superior display), it needs to be the main monitor(menu bar) in 10.6.2.
So, you can see my trap - Accurate color, or annoying cursor artifacts left on the screen (sorry, it really bugs me as I work) as I work in Painter.
Attempted fixes: Trashed all of Painter's prefs, all of Wacom's Intuos 4(latest driver) prefs and software, switched plug ins on the back of the mac for the displays(lots of restarts), ran cache cleaning Cocktail and DiskWarrior, etc. -- no change, as I can duplicate the issue w/ the above set up. A sidebar or maybe be very related note: I have an iMac w/ max amount of ram (model not very old -- maybe 1 or 2 old) and I have had a long standing issue working on the iMacs we have had w/ this brush cursor artifact problem (in Leopard and Snow Leopard). I am on one monitor w/ the iMac, so you know here the menu bar is...hmmmmmmmm.....?
Thanks!, T

I have posted this on painter forums, though some of the issues coming together here are directly related to issues w/ Snow Leopard and dual displays. Thought I would try here....
This is so bizarre. When I ever I run P11(I think this is going on in P10 too?) w/ the OS X (snow leopard, 10.6.2 on quad core Intel Xeon Mac Pro, 10 GB of RAM) menu bar on my Eizo(making it the main display), and the Apple Cinema display left as the #2 monitor, I get very annoying brush cursor artifcats left randomly on the Eizo screen after strokes. One cannot predict when the cursor will leave it's gray "marks", but it will do it, sometimes 5 strokes in a row, sometimes after 15 strokes or so? If I move my brush back over them, or change the image percantage view, they vanish, obviously new ones coming back, as I work.
However I put the OS menu bar on the AC display, yet work back on the Eizo, this does NOT happen. No cursor artifacts. Well, at least I can summon the issue
The reason I am doing this is Snow Leopard has bad color issues w/ dual displays (well documented, much to Photoshop CS4 users frustrations, and mine). Apple needs to fix it... but for me to see the right color on the Eizo(this is my main color and superior display), it needs to be the main monitor(menu bar) in 10.6.2.
So, you can see my trap - Accurate color, or annoying cursor artifacts left on the screen (sorry, it really bugs me as I work) as I work in Painter.
Attempted fixes: Trashed all of Painter's prefs, all of Wacom's Intuos 4(latest driver) prefs and software, switched plug ins on the back of the mac for the displays(lots of restarts), ran cache cleaning Cocktail and DiskWarrior, etc. -- no change, as I can duplicate the issue w/ the above set up. A sidebar or maybe be very related note: I have an iMac w/ max amount of ram (model not very old -- maybe 1 or 2 old) and I have had a long standing issue working on the iMacs we have had w/ this brush cursor artifact problem (in Leopard and Snow Leopard). I am on one monitor w/ the iMac, so you know here the menu bar is...hmmmmmmmm.....?
Thanks!, T

Possible to do dual display with a mini?

I have an early 2008 Mac mini (Intel) - with the standard DVI connector; using the supplied DVI/VGA adapter to connect to an LCD monitor.
I'm just wondering if it is possible to use two displays with this model and if so, how do I connect the second monitor?

Several ways of doing it in this thread:
http://discussions.apple.com/thread.jspa?messageID=8335705&#8335705
If you want to go the usb route, see also:
http://eshop.macsales.com/item/Other%20World%20Computing/VIDU2DVIA/
Be sure to examine the limitations of each method.
(I'd also consider that your 2008 Mini likely has substantial resale value and that you might prefer getting a 2009 Mini which natively supports dual displays.)

Mac Mini (mid-2011) dual display with extended desktop

Can Mac Mini (mid-2011) dual display different picture on HDMI TV and DVI monitor. I can only get it to mirror and not display different programs or extended desktop. Can i "extend" instead of "mirror"? and how

Hi David it should...
Display Support:
Dual Displays
Resolution Support:
1920x1200*
Details:
*This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapter and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
Are you using splitter maybe?

Dual Display on Mac Mini

Hi there,
I want to have a dual display setup with my Mac Mini. There's also a twist. One of the displays is a regular monitor. The other display is a 46" TV. I am not too technically minded - is there a splitter or some kind of dual display "kit" I can pick up?
Thanks!

Which Mac mini? The new one has two video outputs on it, so two displays is not a problem.

Dual Displays and Windows XP

Hello,
I have a MBP with the Radeon X1600 graphics card. Under OS X I can run dual displays without a problem, either extended or mirrored. Using Bootcamp to boot to Win XP, I can only get the 2nd monitor to run extended, I can't get it to run mirrored. What really drives me nuts (short trip) is that I have run it in mirrored mode before when I teach. I go to the Display dialog box and "see" both monitors, but the only way I can get anything now on the 2nd is to run extended? I could update Radeon driver on the Windows side, but I thought BootCamp took care of that and I don't want to mess up my laptop?

It is definitely best to reinstall anytime you make a major system change. You will have to do at least a windows repair although I am not sure if it will fully enable the dual core.
Good Luck
Jeremy

Dual Displays (Dual Monitors)

Similar Messages

Maybe you are looking for