Dual G4 Won't start up with ethernet internet connection plugged in

Hi,
My Dual 533mhz won't start up when the ethernet cord is pluged in. This recently started happening out of the blue (at least, I can't recall doing anything that might cause this). When I leave the ethernet cord in, the computer starts up with a network disk icon flashing and never goes away. When I don't have the ethernet cord plugged in, the computer still blinks with the network disk, but eventually changes to an OS 9 question mark folder, where it blinks some more and finally boots up normally.
The ethernet cord is one from a router.

Open the Startup Disk pane of System Preferences, select your hard disk as the startup disk, and quit System Preferences.
(10239)

Similar Messages

  • Quicksilver Dual 1GHz won't power up with the monitor connected.

    My Quicksilver with 17" LCD Studio display won't start up. The power button blinks on, the fans make a turn or two and the red LED on the motherboard blinks once. If I hold the power button down it blinks once but the fans and red LED repeat once a second. After this began I started it up in FireWire target mode with the monitor disconnected and it worked fine for a few hours. Then it seemed to start up ok without the monitor attached but would immediately shut off when I connected the monitor. Now just the behavior I described at the beginning. I've reset the SMU (PMU??), zapped the PRAM. left it unplugged and taken out the battery. Nothing changes. This has all been in the past 24 hours after I shipped the CPU and monitor back to my home. What's next??
    Frank

    Thanks. I tried an old VGA monitor and The CPU started up without a problem. Then I examined the pins on the Studio Display. That was the problem. Since I pugged it in several times, both the male and female plugs were screwed up. I carefully moved the pins on the plug and the receptacle back into place and everything is great now. I’m sure it wont last through to many repluggings, though.
    Frank

  • Conflict with ethernet Internet connection

    Since the last firmware update, a weird conflict has emerged. When a Thunderbolt cable is plugged in so that my MacBook Pro is connected to a display, the Internet connection goes down. I obtain the Internet through an ethernet cable connected to the mains electricity circuit.
    When I start up in the morning, the Internet and the display work for about five minutes, and then the Internet fails. It comes back every time I pull the thunderbolt cable out. It disappears when I put it back in. Network Diagnostics says I get as far as the network, but not to the ISP.
    This is very frustrating. Any ideas anyone? I have just updated to version 10.8.3, but this has not fixed the problem.

    I'm not sure what you mean by...
    I obtain the Internet through an ethernet cable connected to the mains electricity circuit.
    NORMALLY, you'd have the Ethernet cable plugged into a router... and you'd use the Display Ethernet under System Preferences>Network when your ATD was connected via Thunderbolt port:
    Like so...
    Can you be a little clearer on where you have your ATD>Ethernet port connected?
    Clinton

  • PowerMac MDD 1.25 Dual G4 won't start..

    Abruptly this PowerMac MDD 1.25Ghz Dual G4 won't start up. The button lights up, but there is no other reaction from the PowerMac. I have already reset the PMU on the logic board. I have replaced the CMOS battery. I removed the hard drive and copied important data off it. Any other suggestions before taking it to my local Authorized Apple Repair Station.

    wouldn't it be more prudent to just replace the "wind tunnel" power supple
    As a matter of troubleshooting, no.
    After testing and confirming, yes.
    Used and refurbished power supplies are available on eBay.
    The 360W MDD PSU, having revamped fans, is the desireable one.
    I'm thinking of just taking it in and have them check it out.
    A third party repair service might be fine. Apple will just say it's too old.
    I'm sure I can replace the power supply myself.
    http://www.youtube.com/watch?v=uEfNH1DaJUo
    Where is this capacitor located? inside the power supply?
    Inside, where it is very dangerous for the non-trained to access and repair.
    PSU components hold deadly charges long after they are unplugged.
    Read more on some of the possible faults:
    http://www.badcaps.net/forum/showthread.php?t=7165
    Pro repair service here:
    http://www.galaxyhp.com/
    and here:
    http://natramelec.com/g4powersupply/

  • IPhone5 won't start up or charge or connect to pc

    IPhone5 won't start up or charge or connect to pc  still not working after trying different cable removing sim and hold home and on button :(

    If your warranty is expired then they won't send you a new one. That's the point of having a warranty, once it expires then there's nothing Apple can do about it. They give iPods a grace period of 1 year to malfunction, if the iPod does happen to screw up and not a year old yet then Apple does replace the damaged iPod and sends the customer a refurbished one.
    Since you have no warranty you can buy another MP3 player (from Apple or whatever other company you choose). Apple does not sell new minis any more, only refurbished ones which are cheaper than new ones actually.

  • Why won't my airport express allow internet connection on TV blu ray? I have internet connection on iMac

    Why won't my Airport Express allow internet connection on my Blu Ray when there is internet connection on my IMac?

    I'm guessing you only have the modem/router supplied by your isp and the Airport Express.  Is the Airport Express connected to the modem/router with an ethernet cable?  If not, plug one end of the cable into an available port on the modem/router and the other end in to the WAN port, indicated with a dashed circle, on the Airport Express.
    Have a nice day.

  • I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

    I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

    Ned, thanks for responding. Internet access is not the problem, I will have a tower computer connected to Comcast.
    Isolating the laptop  from the internet is the issue.
          From: Ned Murphy <[email protected]>
    To: Mordecai benHerschel <[email protected]>
    Sent: Wednesday, March 18, 2015 7:27 PM
    Subject:  I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
    I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
    created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussionSince it is a portable machine, couldn't you go somewhere that has wifi available and use that as a temporary internet connection? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7314414#7314414 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7314414#7314414 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Itunes 8.2 disables Ethernet/Internet connection

    In an effort to upgrade to iTunes 8.2 this morning, I d/l and installed without difficulty. However, afterward, my computer did not recognize my Ethernet and I could not connect to the internet. I restored my computer to an earlier restore point, which restored my Ethernet/internet connection and deleted iTunes 8.2. After some manipulation of files, I now have a working version of iTunes 8.0.2. This is so frustrating, b/c it has taken me several hours of research to get everything functioning as it was before installing the iTunes upgrade.
    What do I have to do to get Itunes 8.2 to function on my computer without it disabling my internet access? Apparently without the upgrade to 8.2, I cannot download the software upgrade for my iPhone 3g.
    Thanks for your help.

    Its amazing, my previous post which was deleted by the powers that be, was solely related to the problem that alot of people are having. Namly Itunes disabling internet connection, because I was extreamly irrate about the whole this I accidentally put a swear word in the post.
    How is it that the posts can be read to police against that but not to check on peoples problems and get them sorted.
    Seriously apple get this problem sorted, I object to having to join this forum giving away my details so you can now email me, with alot of stuff that I don't even want. One thing I would like is for you to sort this problem out!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Hope that isn't too many exclamation marks, hope it doesn't offend anyone.
    I am running XP, when I download Itunes it gets rid of my internet connection, thus making Itunes more useless than it already is.
    We are waiting for an answer. As I said in the previous post, DO YOUR JOBS AND GIVE US AN ANSWER TO THIS PROBLEM!!!!!!!!!!!!!!!!
    And for the Apple discussions staff, if you are reading this, how about a bit of customer service, stop hiding behind your standard signature block and sign your emails with a name. The personal touch would make people less inclined to lose their tempers.

  • How can I connect my i pad to a hard wired ethernet internet connection?

    Can I connect my i pad to a hard wired ethernet internet connection?

    No you can't. You can use Internet sharing with your computer making the computer the WiFi hotspot for the iPad, but you cannot connect the iPad to an Ethernet cable.

  • Download CC versions for installation on a computer with no internet connection

    So I have just signed up with CC as I am wanting to get Photoshop and lightroom
    So I have a computer with no internet access, and so I would like to download the CC versions of the software on my work computer.
    Once downloaded, I will install the software on the computer with no internet connection, then utilise my mobile phone to teither the computer to the internet to register the products.
    So my question is how do this?
    Downloading the software using the manager on my phones internet is not an option. (with 300mb per month quota on the phones not an option)
    I am wanting the CC features of photoshop not CS6 so registering the cs6 version is not an option.
    Also when updates come out for CC where can download those.
    (we have had a change of govt so I might get 24mb/s internet in 2019)
    thanks

    Hi Paul,
    Welcome to the Community!
    You can certainly download the files on a different machine and install on a computer without internet however you should connect to internet once in a month so that we can charge your credit card.
    The option to connect to internet with phone will work however updates needs to be downloaded via internet as the size might be in GB's.
    To download the executable files, visit this page http://prodesigntools.com/adobe-cc-direct-download-links.html. Remeber to follow the Very Important instructions or else the download will not start.
    Thanks!
    Ankit

  • I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

    I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
    After +/- 10 to 15min my connection is gone.
    Does anyone have a sollution?

    Lots of people are having the same problem, you're not the only one, belieeeeve me.
    Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
    It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
    So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now.  I already posted  a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
    i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
    Site:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

  • No Ethernet/Internet Connection on Parallels 7 Running Snow Leopard Server - Fix?

    I have recently installed Parallels 7 on my 2013 iMac, and have both Snow Leopard Server and Windows 7 running great on the Parallels platform.
    However, after installing some anti-virus software, "ClamXav" and "MacScan", I need to have the internet connected to my Paralells 7 so I can receive viral updates to both these programs. I am unable to get any ethernet/internet connection on my Paralells 7 running Snow Leopard Server.
    I have tried to update the Paralells 7 Snow Leopard Server "network Info" (in SL systems preferences" ... as the same ethernet connection info that I have running my "network connection" on my main OS Mountain Lion, but still no ethernet connection in Paralells 7.
    This is a screen grab of the locations where I believe I am able to update my "ethernet" info for Paralells 7 Snow Leopard:
    Obviously, I've blurred out the current info in these two windows, for security purposes, but exactly what should be applied to these windows to get my "ethernet" connection in Paralells 7 up and running?
    I would think entering the exact same "network info" as appears in my Mountain Lion "Systems Preferences - Network" window, would get me internet connected on Paralells 7 Snow Leopard? Evidently not ... what is needed for me to get this right?
    Anyone have experience getting "ethernet/internet" connected on Snow Leopard Server, using Paralells 7?

    MlchaelLAX
    Since I have been directed to: "NOT waste everyones time on this discussion"  the only thing more I am going to do after this post is click on: "Stop email notifications" and never return to this thread again!
    Internet access through Ethernet in Snow Leopard Server installed into Parallels 8 on 2011 Mac Mini in Lion:"
    I simply don't want to purchase and have to install Parallels 8 .... Parallels 7 should work fine on connecting to the Internet. Also, I was asking about the internet connection issue with the new 2013 iMac (running Mountain Lion 10.8.3 runiing Parallels 7), not a 2011 Mini Mac running Lion with Parallels 8.

  • Problem with my internet connection with Mail and others

    Hi
    I seem to have a problem with my internet connection that is through Ethernet. I have just downloaded the update to iLife 9 and the down load speed went from zero to 1.1BB/s but most of the time it downloads at speeds around 8KB/s also Mail some times returns mail sent but there seems to be no problem sending out only that things go faster out than in. My internet speed from my ISP is 500KB/s so as you can see I was at first happy that I was getting speeds in of 1.1MB/s. I have done a diagnostic test through network also fully run Norton and finally run utilities with no problems showing. My ISP is willing to come and have a look at my internet but I some how think it's my computer, any ideas?
    Thanks

    The first thing I would do is completely disable Norton AntiVirus; there are no viruses for Mac OS X, so it can't protect you from something that doesn't exist. It can, however, severely slow down your system. Do that and then restart Mail and see if the problem continues.
    You should also try creating a new User account and test Mail there to see if you experience the same problem; if so, then the issue is systemwide. If not, it's something specific to your regular user account.
    As for your download speed, it's not 1.1MB/s; it's 1.1Mb/s. Upload speed is slower than download speed for both Cable and DSL service. I doubt the problem is your modem/router, but you should try shutting down your Mac and the modem for a few minutes. If your modem/router has a reset button, use it, then restart it and your Mac and see if the problem continues.

  • Can creative cloud be used with intermittent internet connections?

    Hi,
       I have a number of clients that like to "work on the ice" if you know what I mean. They ar eall ice fishermen or work in that industry. Can CC be used with intermittent internet connections?
    Thanks,
           Van

    Hi Van,
    I copied this from the Creative Cloud FAQ:
    http://www.adobe.com/products/creativecloud/faq.html
    Do I need ongoing Internet access to use my Adobe® Creative Cloud™ desktop applications?
    No. Your Creative Cloud desktop applications (such as Adobe® Photoshop® and Illustrator®) are installed directly on your computer, so you won't need an ongoing Internet connection to use them on a daily basis.
    An Internet connection is required the first time you install and license your desktop apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
    For annual members, you can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.
    Hope that helps,
    -Dave

  • Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell computer w/ windows 7 with minimal programs installed

    Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a nItunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell, windows 7 ultimate, no virus or firewall programs installed.

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

Maybe you are looking for

  • ODI metadata load impacts Hyperion Planning performance

    I am performing a dimension load of approximately 14,000 members, with a few attributes, from an Oracle view. The data is staged instantaneously. But it takes a long time (30mins plus) to load to Planning. During this time, Planning can become unresp

  • Managed Servers do not start automatically on machine reboot.

    Hi all, We have installed node manager as windows service. We have configured a managed server and an admin server which are on same machine. We are using WLST to start the admin and the managed servers. The sequence is : java weblogic.WLST connect()

  • Help! I Password Protected My Zen

    Hi, I'm new here and I new help. While fooling around with my Creative Zen Vision W 30gig player the other I managed to password protect the videos and some pictures. I have no idea what I plugged in for the password and now can't view this protected

  • Problems when i am viewing ppt presentation-no music

    When i open a power point presentation through keynotes it opens correctly. The problem is that i cannot hear any music on the presentation, when it is supposed that i should hear music while i am viewing the presentation. Can anyone help me?

  • Color management with Aperture and HP Envy 110

    I have an up-to-date version of Aperture and a new HP envy 110 printer. There does not seem to be the option to use any clor profile but HPs on the print menu. Th eproblem seems to be common to all other apps I use. Have I wasted my money?