Dual GPRS and (Broadband) Internet Connections

I have been trying to create a GPRS connection while maintaining my (broadband) Internet connection. I know I have to change the routing table but am not sure where to obtain the IP addresses I need. Can you assist me?

Same thing happens to me after updating the N95-3 software to version 20. The thing is that before the update I was able to do multiple conections, one on the PC and one on the phone. So basically I know its possible on the N95 but so far I havent been able to do so on firmware 20. If someone knows how to correct this problem to achieve multiple connections, please help us.

Similar Messages

Up and Down Internet Connection

Recently my MacBook is having up and down internet connection. I'm using the new Aiport Extreme base station which is connected to my cable modem. By up and down I mean, the connection seems to go in and out.
My Airport signal status is full bars, so it seems to see the base station. It is like the radio signal or whatever gets tangled and drops connection. I have completely reset the base station and started fresh. I've unplugged the modem and base station and gone through all the basic troubleshooting steps.
My wife has a PowerBook G4 and she can surf with no hiccups, while my machine stalls. One thing I have done to keep a solid connection is to connect iTunes to an internet radio station. It seems like the stream keeps the connection without dropping?
Any ideas on what is going on? Is my internal airport card bad or are is there something else going wrong? Any help or insight is appreciated.
Thanks.

Try…
1) Resetting PRAM…
http://docs.info.apple.com/article.html?artnum=2238
2) Setting your Airport to connect to "Preferred networks" rather than Automatic (done in System Preferences > Network > Airport > Airport)
3) Make sure your home network is at the top of your Preferred networks list
4) Failing those delete your wireless network profile, apply the change and readd your profile

I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do?

I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.

Your warranty includes 90 days of phone support. Contact Apple.

Why can't I log into my messages or face time and my Internet connection is great

Why can't I log into my face time or messeges and my Internet connection is fine

iOS: Troubleshooting FaceTime and iMessage activation

I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

Me too!!! It says check your Downloads, but unable to find Downloads...

Why is my macbook pro running so slow and losing internet connection?

Why is my Macbook Pro downloading so slowly and losing internet connection frequently?

Write off the MS stuff as indicators for now--starting with Office 2008, they developed very long launch times. The time to launch 2008 on my old 1.25Ghz G4 and my MBP 2.2G are virtually the same. Even document opens/saves are slow compared to Office 2004 and earlier.
1) You have adequate hard drive space so that eliminates one of the usual suspects.
2) Check for runaway background processes. Quit all running user applications so the computer is at normal idle. Find Activity Monitor in Applications > Utilities and launch it. If you've not run it before, change the "Show" pulldown at the top of the AM window from its default of "User Processes" to "All Processes." There is a column for "%CPU." Click that column header to sort by CPU usage. Watch the processes "bubble" for about a minute to get a better picture of the usage.
If any process is using more than about 25 percent of the CPU cycles while the computer is idling, post the names of the processes and we can see if they can be eliminated. My MBP shows nothing using more that about 5 percent on any given test run as long as I close all my user apps.
3) If you have never done any sort of maintenance procedures, taht can slow you down. Simply restarting the computer a few times a week clear a lot of temporary files. You also may wish to review this article on the Mac OSX periodic maintenance scripts, which, if run, also do a lot of cleanup:
http://thexlab.com/faqs/maintscripts.html
There are other useful articles on file maintenance associated with the one. Here's the index:
http://thexlab.com/faqs/faqs.html
Check out articles with "Maintain" and "Tuning" in the titles.
4) Use Disk Utility to check the SMART Status of your hard drive. A failing drive can make things slow before it makes things stop.

HT201274 I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

Resolve specific iTunes update and restore errors - Support - Apple
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

How do i restore phone back to factory settings if there is no sim card and no internet connection

There is no sim card in my phone and no internet connection. How do i restore the phone back to the factory settings?

That is about all a user can do
One last thing ,try this thread
how to put iOS 7 into DFU mode
and try that although not an Apple supported process and read the posts carefully
but it does look as if it now is a hardware issue .....sorry
Did you not clear it before sending to the online Co
just a thought was it carrier locked ?if so I would guess the online Selling Co may have hacked it to remove the lock to sell it as a not carrier locked device

After installing IOS 6, my iphone started to close applications alone and has internet connection instability Wi-fi

After installing IOS 6, my iphone started to close applications alone and has internet connection instability Wi-fi

please try this.
airplane mode on + wifi
You will get very good Internet connection.
This is bug of iOS 8. I already reported this to Apple to solve this problem ASAP.

Just purchased Airport Extreme ac and lost internet connection 3X. Reset to factory settings and worked for 2 days then lost connection and remedied by unplugging power supply. Anyone else having problems?

Just purchased Airport Extreme ac and lost internet connection 3X in less than one week. Fisrt time, reset to factory settings and fixed problem. Has occurred 2 additional times and connection re-established by unplugging AP extreme. Anyone else having these problems? Do I have a bad router? Thanks.

I definitely think this is a Mavericks issue. My iMac running Mavericks is the ONLY system in the house that drops the network randomly while all other systems never lose the network. No idea how to resolve this, but here is the workaround I'm posting:
I've had the 'network drop' issue with my Airport Extreme for the last 2 months. It reconnects when I pull the ethernet cable and plug it back in. I've tried downgrading the AE firmware, resetting to factory, etc. Nothing worked. I finally threw in the towel and created a script that monitors my network connectivity and restarts my interface if it senses it has dropped:
#!/bin/ksh
while true
do
yup=`ping -c1 -t2 www.google.com|grep from`
if [[ -n $yup ]]
     then echo "Internet is connected!"
else
        ifconfig en0 down; ifconfig en0 up
        echo "Down at `date +%m%d%Y%H%M%S`">>./dropped.out
fi
sleep 5
clear
done
I know its a workaround, but its saving me the headache of constantly pulling my cable and putting it back in!
Good luck!
-Mike Gray

My computer is running sluggish and the internet connection runs very slow. what can I do?

My mac air is running slugiish and my internet connection takes forever to change windows...what can I do?

If the computer is brand new, it may be reviewing (indexing) all you files for search. This will take a few hours to complete. Otherwise you likely have a program that is running poorly and slowing your system down.
Open the Fibder
Click the Go menu at the top of the screen
Click on utilities menu item under go
Open the Activity Monitor
When Activity monitor opens, there will be a lot of data in the window, to make better sense of it click on the column labeled CPU. This will sort entries by how much of your computer's CPU they use. The lower the number the better.
Locate any programs using 80% or more of your CPU. They are the likely culprits of your speed issue.
If the speed issue is only related to surfing the internet, then you more than likely have an issue with WiFi instead. Try moving closer to your wireless router to see if it speeds up.

WRT350-N, 1 LAN and 2 Internet connection...

Hi there,
I'am a lucky owner of a WRT350-N that works pefectly, but i'm trying, without any success to build a LAN with 2 internet connection.
I got 2 kind of internet, 1 through DSL and 1 through CABLE.
My standard configuration is:
Cable Modem >>> WRT350-N >>> 2 PC on Gbit wired lan >>> 1 ext. HDD on usb 2.0 >>> 1 Notebook on wireless G >>> PS3 on wireless G
What I'm trying to do is connect the Notebook to the DSL internet with an ethernet cable, but keeping shared the file with the other PC via wireless, the other PCs must remain connected to the internet through the Cable Modem
What i've done is:
- Connected the WRT350-N to the internet via Cable modem
- Connected the Notebook to the WRT350-N via wireless
- Blocked the access to the Cable internet for the notebook on the WRT350-N
- Connected the Notebook to the DSL router (Zoom ADSL x5)
- Blocked the internet sharing on the notebook
- Selected the rigth Getaway, Cable for PCs and DSL Notebook
With this configuration everything works fine for a couple of hour then the Notebook start to try to connect to internet through the wireless connection obviusly without succes...
Can anyone help me with this?
Message Edited by Oneiros on 02-26-2008 04:04 PM

On the majority of Linksys (Cisco) SOHO routers, the default factory setting is to have one WAN (Inet). In order to have multiple uplink connections, you'll probably need to look into third party firmware (ie DDwrt, OpenWRT, etc). You are looking at configuring multiple Vlans on the router, then loadbalancing (usually round robin) across them. As well, you'll need to configure a secondary firewall script, for the second WAN. Try reading up at: http://www.dd-wrt.com/wiki/index.php/Dual-WAN_for_simple_round-robin_load_equalization Be aware that Linksys provides no official support for thirdparty firmware, and you're rather on your own as such. (Note to any Linksys moderator: You may want to upchannel to your R&D department that SOHO with multiple WAN connection, DSL & Cable or otherwise, has become more popular. May want to introduce a product line for this target consumer group.) Cheers.

Installed OSX 10.4.3 And Lost Internet Connection ! Help Please.

I have posted this in the Tiger forum but know there is a lot of general expertise amongst FCE users (grovel, grovel!) and I only upgraded to Tiger so that I can get FCE 3.5 for this computer!
I have updated from 10.3.9 (Panther) to 10.4.3 (Tiger) on my eMac.
Everything appears OK except I cannot connect to the internet.
On finishing the installation I got an error message saying "Could not load login file".
Incidentally, during the installation I disconnected all peripherals including my USB Broadband "modem" (I can't remember the correct terminology).
My "modem" is a "Speedtouch" and in the dock I have an application named "Diagnostics" which has to open to allow the Speedtouch to connect to the internet.
"Diagnostics" will not open.
When I look in my Network configurations the Speedtouch name has a red dot alongside and it is not connected.
If I open Network Port Configurations the Speedtouch name is greyed out and cannot be selected.
Any help would be appreciated.
Ian.
PS. Luckily my iMac internet connection is OK !

Nope! I have nothing resembling a stingray or any other aquatic creature!
OSX 10.4.3 was successfully installed thanks to the resolution of the above hiccup and I have now downloaded and installed the OSX 10.4.7 Combo update which brings my OS to "state of the art" status.
I will now be able to install FCE 3.5 - if I can get round to parting with the cash!
Then we'll see what everyone's talking about.
Ian.

How to share broadband internet connection on Satellite A200-1VG

Hi,
I am very new to the world of laptops, 3 days old. In fact, I have a desktop (the OS is XP professional) and have just bought my self a Satellite A200-1VG (the OS is Vista).
I believe it is possible for 2 machines to share a broadband connection, but how I do not know. I must confess to being quite ignorant when it comes to technology ( you have probably gathered that by now) and I ask that any advice given will be given in not too technological language.
Thanks in advance from a newbie.
MegP

Okay, firstly some routers or mdoems come with 2 ports on the back so you can connect two different computers so simply plug them both in
if not, then i advise you buy a router which allows you to add numerous computers to the same network via wires or add numerous computers wirelessly
i have one computer connect to my netgear router -wired
i have one computer wirelessly connected with a Netgear USB wireless reciever
then i got my laptop which is connected via wireless
i have xbox live which i connect to the internet via my laptops wireless connection, this can be done with any pc or laptop aswell
what you do is
wireless networks - where it showws any detected networks
change advanced options - on the side
advanced tab
then allow other computers to use this computers internet connection
simple as
all you do is plug in your other pc or whatever

Automatic broadband internet connection---how to do?

how to make a programme which will connect to broadband internet automatically in windows/linux/platform independent?
actually my perpose is to make a program which will connect the internet automatically at 2:00am and disconnect the internet connection if i set the time at 8:00am and if i set any link it will start the download automatically( just like a download manager does).how can i do that what short of API should i use for that?is there any link and gudeline for that?

jverd wrote:
jschell wrote:
You do not "connect"/"disconnect" from the internet.Maybe he's got a serial port robot arm controlling the power switch on his cable modem.I could use that to scratch my *ss! Sweet!

Dual GPRS and (Broadband) Internet Connections

Similar Messages

Maybe you are looking for