Dual graphics adapters in HP 500-205t desktop

I've got an HP 500-205t with which I ordered a dedicated video card upgrade. The computer is about six months old. I now find I have a need for dual monitors. The dedicated adapter has only one output. The integrated one has two. Is there any way to use both adapters at the same time? I hate to waste the "upgraded" adapter. And, if it is possible, can I use three montiors? Thanks. Richard
This question was solved.
View Solution.

Hi,
No, system will disable ths onboard card when put an external card in. You can remove the add-in card and use the other two ports for TWO monitors:
4 - VGA
5 - DVI-D
Computer ---> DVI-D cable ---> Monitor #1
Computer ---> VGA cable ---> Monitor #2
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Upgrading graphics card for Pavilion 500-314 Desktop PC

I am looking to upgrade the graphics card in my HP Pavilion 500-314 Desktop PC. I was looking around and saw some forums that said it would be very difficult to do so with this PC and I have found a few that said it is absolutly possible. Unforunatly none of those forum posts were from this site except one that did not give much explanation, so I figured I would just ask.
The graphics card that comes with this PC is decent enough to run most current games, just not at the level I would prefer. I am not looking for the most cutting edge ultra mega super gamer graphics card, just something this PC can handle that would be an upgrade with 2GB dedicated vram.
Thank you in advance for any help you guys can give me!
PS This will be my first upgrade I have ever done on a PC myself outside of the ram on this same PC, so please try to keep that in mind with any explanation/answer .

Your system has UEFI BIOS, so you'll need to understand Secure Boot. Then read this to change settings. For gaming, I would go here, and do the "Can I Run It" quiz. Would recommend a Corsair 600W PSU.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

HP Pav 500-205t Desktop, How to access advance boot options, to boot from a USB drive

I have tried Esc, F1, F2, Delete & F12 without sucess. Previous HP computers this has never been an issue.

CocoJoe, welcome to the forum.
I believe that you want to continuously tap F10 at the HP Logo.
Please click "Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HP Pavilion 500-336 Desktop PC not recognizing NVidia GeForce GT610 graphics card

I recently purchased a HP Pavilion 500-336 Desktop PC and I already had a EVGA NVDIA GeForce GT610 graphics card. When I try and install the graphicas card, I get the 6 beeps. So, I googled the problem and somebody had suggested to disable hyperthreading in the BIOS and go to legacy mode from UEFI mode which I did as well.
However, my monitor still doesn't turn on and goes to power saving mode. Please help. The customer service rep said the power supply needs to be upgraded, but I don't think this is true. This graphics card is not that power hungry.
Here are the specifications of my desktop: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c04345595
And here are the specifications of my video card: http://www.geforce.com/hardware/desktop-gpus/geforce-gt-610/specifications
Thanks in advance.

Hi:
You do not disable hyperthreading in the BIOS. I recommend you go back and enable that setting.
Please see this document for what settings you need to change in the BIOS when you install a non-HP video card...
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03653200&lc=en&jumpid=reg_r1002_us...

G505s dual graphics false advertising ?

hy, I am new on this forum.
Ii have a g505s, a10, 1tb (8gb ssd?), 8gb ram, dual graphics model, but there is no sign of a second video card on my laptop. an that is because it does not have a dedicated graphics card. i have tried several pc info tools (cpu-z, gpu-z, aida 64 extreme). all this tools dont recognize a dedicated graphics, and now i'm wondering... why there is a sticker on my laptop that sais dual graphics? why are we being fooled by this fals advertising method ? why have a i paid 500 pounds for a laptop that is not what i was told that is? but the most important thing is... how can we correct this situation?
thank you
sysem information :
product : 20255
Moderator Note; s/n edited for member's own protection

Hi.
Read my post in this topis:
http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/lenovo-g505s-problems/td-p/1217106/page/2
I have found out that if u change your power performance from maximum to optimum it will give u boost.
Better boost (or the i should say proper boost) in game or any application that need 3D graphic or Dual Graphic u can get by setting your game / program / application from maximum to optimum performance. ( u can find those settings in "swich graphics configuration" accesable by RMB on desktop or by Catalyst Center.
Soryy for my EN.
If u have any question or simillar problem u can ask me
Moderator Note; e-mail address removed.

Dual Monitors setup on HP 500-319na

Hi, hoping someone might be able to help (and thanks in advance)...
I recently purchased a HP 500-319na desktop computer and would like to connect two monitors to it. Both monitors only have DVI connections.
I currently have one (working) monitor connected through the DVI connection.
I purchased a HDMI to VGA cable for the second monitor so that I can plug it directly into the HDMI port and monitor - but unfortunately the computer will not recognise the second monitor.
Tried updating the graphics card software to the latest version, but no joy.
Am I doing something, obviously, wrong? Help!
Thanks again,
Sam

Hi,
There are many around, such as:
http://www.officeworks.com.au/shop/officeworks/comsol-hdmi-to-vga-and-3-5mm-audio-adapter-cohdvga35a
http://www.dicksmith.com.au/ipad-accessories/belkin-hdmi-to-vga-adaptor-with-audio-dsau-cn2015
If you don't need audio, you can buy a cheaper one.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Pavilion 500-205t power supply

So I'm thinking about getting the Pavilion 500-205t, with the i5 4690 and 6 gigs of RAM (I don't really need any more than that for gaming anyway, which is what I'll be using it for). I plan on putting in a new graphics card, but the only problem is that the 300 watt power supply isn't going to cut it.
My question is this: What is the name of the power supply that the 500-205t uses (I can't seem to find it online...) and what would be a viable replacement for it? I would need at least a 400w PSU, and I believe the dimensions would need to be less than or equal to 6x5x3.5 inches.
This question was solved.
View Solution.

Hi,
You would be better off buying a Corsair CX500 or CX500 depending on your needs and the cost at time of purchase and the minimum power supply requirement stated by the graphics card manufacturer.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Dual graphics card in M92 Tower?

Hello,
I have a manager here requesting 3 monitors for each of their departments workstations (Lenovo M92 Tower, Intel i5) and I am just wonder if the M92 supports dual graphics cards. I am aware that it only has a PCIe 1x and PCIe 16x slot - the plan is to install two 1x cards, if they are supported.
Could someone confirm if this will work or not?
Thanks!
Solved!
Go to Solution.

First, I have no experience at all with more than two monitors on any PC.
However... AMD's EyeFinity setup can support three (or more) monitors using the multiple connectors on a usable video card. For example, the relatively inexpensive AMD R7 250 card comes in both full-size and low-profile varieties, to fit inside an M92p case (either mid-tower or SFF) in the PCIe x16 slot (which is what you want to use). The low-profile R7 250 DDR5 card from Sapphire (which includes both low-profile and full-size brackets in the retail box, so you can use the card in either M92p case size) has three digital connectors on it: DVI, miniDP, and microHDMI. So you can connect three monitors to them. The retail box also includes adapters for the microHDMI and miniDP connectors, but I'd personally just buy a proper 2-ended straight-through cable (say from Monoprice or other online source) with the correct connector at each end to connect each of your three monitors. I'm not a fan of adapters myself, I'd prefer a suitable cable with the correct connectors at each end.
According to the EyeFinity setup instructions, you use two connectors to go to two monitors, and the third (or more) monitors must connect on the DisplayPort path. In your case you only have three monitors, so you just use all three digital connectors on the R7 250 and you're done! No need to have two graphics cards, and you get high-performance DDR5 as you want, on three monitors.
Again... I've never done this myself, but EyeFinity for three or more monitors is standard technology given an AMD card like the R7 250 sitting in a single PCIe x16 slot.

Question re: AMD dual graphics driver support

Hi, first time poster
I'm interested in the G505s with Radeon HD 8650G + HD 8570M dual graphics. However, from my research it seems that dual graphics is largely useless, at least with laptops currently. NotebookCheck .com says it brings benefit only if the games support it, and can even be detrimental.
Is this accurate? Another forum said that it was of use only if the laptop maker (i.e. Lenovo) updated drivers to support it. One poster said this happens very seldom. Again, is this accurate?
In a nutshell: is the Radeon HD 8650G + HD 8570M setup benefitless?
Thanks in advance

Same problem here with HP Pavilion 15 n201axPrevious it showed 2 drivers in the Display Adapter sectionas - >>AMD Radeon HD 7620G+ AMD Radeon HD 8600Mand >>AMD Radeon HD 8600M I tried different versions of Catalyst but now it just shows AMD Radeon HD 7620G and after rebooting, it comes up with an asterisk markI Dont even even the options of Configuring the graphics card when i right click on desktop.It just shows the AMD Catalyst Control Center which brings up options only for the processor.This is seriously getting annoying!

Dual Graphics in H535: Non-updatable ?

I have Lenovo H535, Windows 8.1 with dual graphics set: AMD Radeon HD 8670D and AMD Radeon R7 240 + HD 8670D Dual Graphics (as copied from Device Manager). This combo showed nasty problem in past, with unability to update drivers. Every attempt (manual or automatic) led to graphics crash and revert to old drivers. This was not problem until today, when Windows 10 update started. Windows 10 Installer is trying to update graphics drivers which causes distorted BSOD, recovery attempt and then revert back to Windowd 8.1. Is there any way to bypass this error, or to get them up to date to bypass Windows 10 Installer update attempt ?

Moan Guide..... please read it first... the link is at my signature.
Anyway your issue is very interesting. I don';t have 3 monitors to try out but I have 2 N6800... (but I'm afraid they might burn my power supply )
But first thought, that is definitely Driver and Hardware limitation! The video cards are not sharing the same video frame buffer, definitely expanding the desktop across different video card output is unacceptable. Unfortunately the driver isn't smart enough to detect this "impossibility", and prevent it from happen, but it just hang itself up.
However, why you have to uninstall and reinstall the driver to resolve?
What do you mean "mon 3 still not controlled, but driver thinks its mon2" ??

G505s Dual Graphics

Is there a possibility to use only the GPU instead of the CrossfireX because GPU-Z shows the video ram being very limited when it is in dual graphics and the card is supposed to have 2gb of ram for the card.'
Here is a screenshot of the program showing how much RAM i have on the card for dual graphics... games dont run well.

Hi grisieyt.
I guessed both would not be listed, This is because they are running in crossfire mode.
Try opening catalyst control center, Right click on the desktop to access it, That should have the information you want.
If it does not download these two programmes GPU Z & PC WIZARD from www.majorgeeks.com.
Gpu z will list all graphics components on the motherboard.
PC Wizard will give you a overview of your entire system.
The SSD cannot hold the OS, Win8 requires between 20 & 30gb of storage, The (D) partition is where win8 is in case you need to re-install for any reason.
Why the SSD is not showing under computer is strange, You may need to get in touch with Lenovo support about that.
Let me know how things progress.
Catt

My g505s was advertised as dual graphics. Was it a lie?

In dxdiag the only graphic it's picking up is AMD radeon HD 7640G
Is there anything I can do to speed up the laptop and increase it's performance with games and such?
IT is the A8 4500m version

hi Sarpynom,
Welcome to Lenovo Community Forums!
Can you check if under Device Manager if under Display Adapter will show 2 Display adapters including the AMD radeon HD 7640G
A dxdiag tool will only pick up One Graphics adapter, It will only pick up a graphics where your Windows is currently running at.
A Dual Graphics will work as Switching to the other graphics card when an Application needs more graphics rendering.
Let me know your Findings
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HP Envy H8-1540t - dual graphics cards, Pcie 3.0 support

I have 2 questions about using dual graphics cards and Pcie 3.0 support in my machine.
The machine is:
HP Envy H8-1540t
Win 8 64
i7-3820 2nd Gen
10 GB DDR3 1600
256 GB SSD
1 TB 7200 rpm SATA hard drive
Blu-Ray Player
TV Tuner
Prem wireless N-Lan and Blutooth 2x2
600 Watt PSU
NVidia GTX 660
This machine uses the Pegatron IPIWB-PB motherboard and has 2 Pcie x 16 slots. I realize that by using dual width GPU's like the GTX 660, the smaller Pcie slots next to them will be buried, rendering them useless. So these are my 2 questions;
1.) Will 2 Nvidia GTX 660 GPU's physically fit within the machine and be supported?
2.) Does this motherboard with it's Intel X79 chipset support Pcie 3.0?
Thank You
This question was solved.
View Solution.

Hi,
You can find ALL information on the following OFFICIAL link, looks like it only supports PCIe Gen 2.0
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03132964#N241
From the image of the motherboard (above) and the following image of the GTX 660, simple answer: 2 cards won't physically fit.
http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-660/product-images
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

LAPTOP Dual Graphics Card CPU scailing (with bash script)

Hey all, basically, getting Arch working with my laptop was a pain due to the lack of power options and graphics control, especially using the open source drivers. My laptop would overheat due to both the dedicated and integrated graphs cards would be running at the same time and my CPUs were running at 100%. After a long while of looking around, I finally found a solution, and being the nice guy I am, I decided to make a script to streamline the process for most people. It mounts the debugging filesystem, adds it to fstab, installs the necessary tools, loads the correct module, and also lets you change power plans, as well as check on battery, graphics card status, and cpu status. this is basically version one so i guess ill add a bit to it over time.
*** MAKE SURE KMS IS ENABLED ON YOUR KERNEL GRUB/SYSLINUX LINE EG: "radeon.modset=1"
******ERROR CHECKING:
if you have the debug fs mounted already, unmount it with umount /sys/kernel/debug
if you get an error modprobing, check what modules are supported from your cpu with ls /lib/modules/$(uname -r)/kernel/drivers/cpufreq/
with the debugging fs mounted, running cat /sys/kernel/debug/vgaswitcheroo/switch to find out what your graphic adapters are named and if needed replace the IGD and DIS with yours
you may have to modify some parts of the program, but i tried my best to make it as easy as I can
Installation:
copy it and save it as foo.sh
chmod 777 it for good measures
RUN AS ROOT
chmod 777 foo.sh
./foo.sh
#! /bin/bash
#By: Dominic dos Santos
#[email protected]
#mount -t debugfs none /sys/kernel/debug --mount debugging fs
#echo"IGD"> /sys/kernel/debug/vgaswitcheroo/switch && echo"OFF"> /sys/kernel/debug/vgaswitcheroo/switch --onboard graphics
#echo"DIS"> /sys/kernel/debug/vgaswitcheroo/switch && echo"OFF"> /sys/kernel/debug/vgaswitcheroo/switch --dedicated graphics
#cpufreq-set -c 3 -g powersave # --powersave cpu freq set
#cpufreq-set -c 3 -g performance # --performance
#cpufreq-set -c 3 -g ondemand #--...
#!!!PLEASE NOTE!!! I am using a quad core laptop, therefore I have the '-c 3' argument. Cores are as such: 0 1 2 3
#Dual core would be '-c 1', 6 core would be 5
echo "RUNNING THIS WIH X RUNNING WILL NOT MODIFY THE GRAPHICS CARD SETINGS"
#checking if debugging fs is mounted, if not, mounting.
if [ -f /sys/kernel/debug/vgaswitcheroo/switch ]; then
echo "DEBUGFS is mounted, continuing wih program"
else
read -p "Press ENTER to mount the debugging directory (REQUIRED)"
mount -t debugfs none /sys/kernel/debug #the mount fs command
echo "Add to fstab?"
read fs
if [ "$fs" == "y" ]; then
echo "debugfs /sys/kernel/debug debugfs 0 0" >> /etc/fstab #add the required line to the fstab
fi
read -p "We are now going to install the cpu drivers and load the required modules."
pacman -S cpufrequtils
echo "Do you have an [a]MD or [i]ntel cpu?" #load the [correct] module now
read input
if [ "$input" == "a" ]; then #AMD
modprobe powernow-k8
elif [ "$input" == "i" ]; then #INTEL
modprobe acpi-cpufreq
fi
echo "REMEMBER TO ADD acpi-cpufreq cpufreq_powersave cpufreq_ondemand cpufreq_performance to your rc.conf beside MODULES=( ****** FOR INTEL CARDS ONLY!"
echo "OR powernow-k8 cpufreq_powersave cpufreq_ondemand cpufreq_performance ****** FOR AMD CPU's ONLY!"
fi
#menu
echo -e "Welcome to my CPU and Videocard Power and Performance Switcherooer"
echo " 1: Powersave"
echo " 2: On Demand"
echo " 3: Performance"
echo " 4: Check Status"
echo "Please select an option"
read input
if [ "$input" = 1 ]; then
#Powersave
#Set CPU to "Powersave", set VGA to onboard and disables one not being used, ie. the dedicated
cpufreq-set -c 3 -g powersave
echo "IGD" > /sys/kernel/debug/vgaswitcheroo/switch
echo "OFF" > /sys/kernel/debug/vgaswitcheroo/switch #the "OFF" infers to cutting the power to the one that isn't selected
elif [ "$input" = 2 ]; then
#On Demand
#Set CPU to "On Demand", set VGA to onboard and disables one not being used, ie. the dedicated
cpufreq-set -c 3 -g ondemand
echo "IGD"> /sys/kernel/debug/vgaswitcheroo/switch
echo "OFF"> /sys/kernel/debug/vgaswitcheroo/switch
elif [ "$input" = 3 ]; then
#Performance
#Set CPU to "Performance", set VGA to the dedicated graphics card and disables the onboard
cpufreq-set -c 3 -g performance
echo "DIS"> /sys/kernel/debug/vgaswitcheroo/switch
echo "OFF"> /sys/kernel/debug/vgaswitcheroo/switch
elif [ "$input" = 4 ]; then # status check
echo " 1: Battery"
echo " 2: Graphics Card"
echo " 3: CPU Info"
read status
if [ "$status" = 1 ]; then #battery
acpi
read -p "Press Enter"
elif [ "$status" = 2 ]; then #battery
cat /sys/kernel/debug/vgaswitcheroo/switch
read -p "Press Enter"
elif [ "$status" = 3 ]; then #battery
cpufreq-info
read -p "Press Enter"
fi
fi
Last edited by imagoose (2012-02-15 22:51:13)

Thats great, thank you. I have an older Dell Studio XPS 13 which has NVIDIA Hybrid SLI. Its current power usage in Arch is killing me (about an hour and a half, where as i can get 3-4 hrs in win7). Right now I am doing all the work through the integrated graphics card, per my xorg.conf, but i dont think i've managed to disable the discrete card yet. When I get on the laptop I'll let you know how it goes.

Rradeon HD 7690 dual-graphics doesn't work in hp pavilion dv6z-6c00 cto quad edition laptop?

I recently purchased an HP Pavilion dv6z-6c00 CTO Quad Edition Entertainment Notebook PC from HP's online store. The laptop was customized with a Radeon HD 7690M discrete graphics card. There is a "dual-graphics" feature that allows a program to be configured to use either the low-power integrated graphics (a Radeon HD 6520G) or the high-performance discrete graphics (the Radeon HD 7690M). However, even when I set a program to use "high performance graphics", the program refuses to use anything but the low-power integrated graphics. When I use ATI's driver, it calls the card a "6700 series", and the card still does not work; when using HP's driver, it calls it the proper name, but the ATI Catalyst Control Center does not work (necessary to assign programs to the discrete card). There is no setting in BIOS to set the computer to use either card exclusively: in fact, there are no graphics settings, period.
Some examples of the games I have tried are:
- Minecraft (I know OpenGL does not work with Dynamic Graphics)
- Portal 2 (Direct X, so should work in theory)
Will I have to get the "special" BIOS update (outdated) that adds the setting for graphics switching?

I suggest dowloading and installing the latest driver for the radeon HD graphics module from the web support portal for your notebook.
What is the p/n for your notebook? (you can remove the main battery and get it from there or from the HP Support Assistant)
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Dual graphics adapters in HP 500-205t desktop

Similar Messages

Maybe you are looking for