Dual Graphics in H535: Non-updatable ?

I have Lenovo H535, Windows 8.1 with dual graphics set: AMD Radeon HD 8670D and AMD Radeon R7 240 + HD 8670D Dual Graphics (as copied from Device Manager). This combo showed nasty problem in past, with unability to update drivers. Every attempt (manual or automatic) led to graphics crash and revert to old drivers. This was not problem until today, when Windows 10 update started. Windows 10 Installer is trying to update graphics drivers which causes distorted BSOD, recovery attempt and then revert back to Windowd 8.1. Is there any way to bypass this error, or to get them up to date to bypass Windows 10 Installer update attempt ?

Moan Guide..... please read it first... the link is at my signature.
Anyway your issue is very interesting. I don';t have 3 monitors to try out but I have 2 N6800... (but I'm afraid they might burn my power supply )
But first thought, that is definitely Driver and Hardware limitation! The video cards are not sharing the same video frame buffer, definitely expanding the desktop across different video card output is unacceptable. Unfortunately the driver isn't smart enough to detect this "impossibility", and prevent it from happen, but it just hang itself up.
However, why you have to uninstall and reinstall the driver to resolve?
What do you mean "mon 3 still not controlled, but driver thinks its mon2" ??

Similar Messages

Rradeon HD 7690 dual-graphics doesn't work in hp pavilion dv6z-6c00 cto quad edition laptop?

I recently purchased an HP Pavilion dv6z-6c00 CTO Quad Edition Entertainment Notebook PC from HP's online store. The laptop was customized with a Radeon HD 7690M discrete graphics card. There is a "dual-graphics" feature that allows a program to be configured to use either the low-power integrated graphics (a Radeon HD 6520G) or the high-performance discrete graphics (the Radeon HD 7690M). However, even when I set a program to use "high performance graphics", the program refuses to use anything but the low-power integrated graphics. When I use ATI's driver, it calls the card a "6700 series", and the card still does not work; when using HP's driver, it calls it the proper name, but the ATI Catalyst Control Center does not work (necessary to assign programs to the discrete card). There is no setting in BIOS to set the computer to use either card exclusively: in fact, there are no graphics settings, period.
Some examples of the games I have tried are:
- Minecraft (I know OpenGL does not work with Dynamic Graphics)
- Portal 2 (Direct X, so should work in theory)
Will I have to get the "special" BIOS update (outdated) that adds the setting for graphics switching?

I suggest dowloading and installing the latest driver for the radeon HD graphics module from the web support portal for your notebook.
What is the p/n for your notebook? (you can remove the main battery and get it from there or from the HP Support Assistant)
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Problem with dual graphic

I own HP PAVILION G6 1202TX model.It is built with dual graphics INTEL and RADEON. INTEL - INTEL(R) HD Graphics 3000 and
AMD- RADEON(TM) HD 6470M.earlier accidently i lost my windows and its all drivers but my main issue is with ts graphics.If i install AMD drivers a notification bar shows problem with INTEL graphics and if i install INSTALL it shows issue with RADEON.After installing the driver every time i restart my pc AMD shows a dialogue box and if i have installed AMD ,INTEL keeps poping up notification bar in right lower corner of pc it something related to INTEL SYSTEM TRAY GRAPHICS.
Now i have installed INTEL graphics driver i and every time ii restart my pc it shows a dialogue box
this dialogue box appers every time i start my pc
PLEASE HELP ME
Hope for a freequent action
THNK YOU.
This question was solved.
View Solution.

Hi ashwani26596,
Let's start by using the HP Support Assistant to check for any updates and drivers to see if that resolves the issue. If that doesn't work then go your Control Panel and then Programs and Features and uninstall the Catalyst Control Center. Then try installing both the Intel High-Definition Audio Driver and the AMD High-Definition Audio Driver.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

FM2-A55M-E33 and Dual Graphics

I purchased a MSI FM2-A55m-E33 Mainboard, AMD APU (A8-5600K), 8 GB Kingston HyperX Memory and a MSI Radeon 6670 viseo vard to do a CrossfireX budget gaming rig.
I have 2 Problems, the memory can not be set over 1333 MHz, if I set it to 1600 in the bios after about 10 minutes of playing wow, the game closes, if I set it back to default (1333) it runs fine.
2nd problem, when I first set up the PC, and started to set up the bios after 20 seconds the PC would restart. I had the video card plugged into the 6670 card, not onboard, this happened 2 or 3 times so I decided to plug it into the vga on the mainboard, no more resets...so I thought...hmmmmm.
Anyway, set up the bios, logged into Windows, downloaded the drivers, set it all up for dual graphics, restarted the pc. Plugged the monitor in the 6670 (as recommended by amd) and no video, pc boots and goes into windows, but I have no video, so I plugged the monitor into the onboard video and viola, it works.
So, next I turn off dual graphics in the Catylist software, reboot pc to just use the 6670 until I get this figured out, plug the monitor into the video card, guess what...no video again. I can only get video from the mainboard, never from the 6670 video card.
I have been tinkering with this all weekend to no avail, its driving me nuts.
My setup:
MSI FM2-A55M-E33 Mainboard
AMD APU A8-5600K (Unlocked)
8 GB Kingston HyperX 1600 Mhz DDR3
MSI R6670 Video Card
Thermaltake TR2 600 watt PSU, 2X 12V Rails
Seagate Barracuda 640 GB HD
Lite-On DVD R/W
P.S, I laready updated the bios to ver 10.1, it didnt fix anything.
Any help would be greatly appreciated.

Quote from: oozz77 on 28-November-12, 21:28:39
I think you got the wrong card for "duel graphics".
I'm sure it can't be higher than a 6570 model with a A8-5600 and that's why it isn't working as it should!!
You can now only use the 6670 once you set i in the bios or simply try to exchange it for a 6570.
Yup, what you have integrated graphics: AMD Radeon HD 7560D, recommended what you need for dual graphics: AMD Radeon HD 6570
http://www.amd.com/us/products/technologies/dual-graphics/Pages/dual-graphics.aspx#3
Although that RAM is primarily meant for Intel Sandy Bridge system with 1600 XMP profile it's possible it may be OK for your system but you would have been better off getting RAM for AMD system instead. When trying for 1600 did you bump up voltage from 1.5V to a bit more like maybe 1.55 to see if it would run stable?
Research for proper component compatibility goes a long way to eliminate problems such as what you are having.

Question re: AMD dual graphics driver support

Hi, first time poster
I'm interested in the G505s with Radeon HD 8650G + HD 8570M dual graphics. However, from my research it seems that dual graphics is largely useless, at least with laptops currently. NotebookCheck .com says it brings benefit only if the games support it, and can even be detrimental.
Is this accurate? Another forum said that it was of use only if the laptop maker (i.e. Lenovo) updated drivers to support it. One poster said this happens very seldom. Again, is this accurate?
In a nutshell: is the Radeon HD 8650G + HD 8570M setup benefitless?
Thanks in advance

Same problem here with HP Pavilion 15 n201axPrevious it showed 2 drivers in the Display Adapter sectionas - >>AMD Radeon HD 7620G+ AMD Radeon HD 8600Mand >>AMD Radeon HD 8600M I tried different versions of Catalyst but now it just shows AMD Radeon HD 7620G and after rebooting, it comes up with an asterisk markI Dont even even the options of Configuring the graphics card when i right click on desktop.It just shows the AMD Catalyst Control Center which brings up options only for the processor.This is seriously getting annoying!

[SOLVED] AMD APU+Dedicated Graphics - Dual Graphics/Turn One Off?

Hello! I have an AMD 3420M APU with 7670M graphics. I use the Dual Graphics feature on Windows (it's available via CCC). I have a working Arch Linux install however it only uses my integrated chip (which isn't terrible but isn't ideal either). I'll try to outline what I've done and what I hope to accomplish .
My BIOS has no feature to turn off the graphics of the APU and the manufacturer (ASUS) doesn't show any signs of ever updating the BIOS for my series of laptops.
As it's an AMD APU so it has ATI/AMD graphics I'm working with ATI/ATI (instead of the usual Intel/ATI) so I can't just blacklist a module to specifically disable a card.
Reading the wiki I've found vga switcheroo however it seems to explicitly mention Intel/ATI so I'm not sure if it would work for me.
This part got me a little bit excited and I would really like a more experienced user to help me with maybe utilizing the following on Arch:
Arch Wiki wrote:The Dynamic Switch needs Xorg support for the discrete videocard assigned to rendering [1].
So, the method listed here (and the AUR package related) will not work until Xorg team add support for the redering on a second card not attached to video. See here for more info.
Specifically what is exciting is the link here is actually listed as "complete" as well as the (newer) blueprint here. I interpret that as either it will be implemented in Xorg soon or it already has been implemented. Which is it, and if it's implemented, how do I utilize it?
I understand there isn't bucket loads of information about APUs on the Internet yet but it would be nice if this could ultimately lead to a clear and transparent way to utilize APU+GPU combos on Unix-like systems .
Last edited by titegtnodI (2012-11-10 17:42:47)

kvanberendonck wrote:
Hi, I have the A8 3500-M APU with a similar setup. I solved my problem by installing the fglrx driver for linux from AMD.
When in X, you can use the same control panel as on windows.
https://wiki.archlinux.org/index.php/AMD_Catalyst
Beware though! While it makes the GPU much, much, much more power efficient and greatly increases the battery life, for some reason it causes the GPU to run at max load for a few seconds during startup which burns a ridiculous amount of power (>25W) until X starts, so make sure you start X automatically somewhere early.
Okay thanks! I was on Catalyst but I did not have the "Switchable Graphics" menu! It's also a much more stripped-down version of the menu (which I'm thinking I prefer).
All I've done is run "pacman -Syu" and disable DPMS and now I see the menu. Strange.
Thank you for the post! I'll mark this as solved .

Fill & Stroke applied when changing graphic style to none

Since you set new rectangles now default to having no stroke and no fill. I think it would be good to also do the same to setting the graphic style to none because it is still applying a white fill & black stroke.
Maybe its something you just didn't notice when making the update, so I thought I would let you know.
Thanks,
Sean

Vicky,
You could make the arrowhead into a Scatter/Pattern Brush, in the following way:
1) Create the arrowhead,
2) In the Brushes palette/panel flyout tick New Brush,
3a1) Tick Scatter Brush,
3a2) Set the Spacing (as the total length of arrowhead and gap relative to the length of the arrowhead, 200% for gap = length).
3b1) Tick Pattern Brush,
3b2) Set the Spacing (relative to the length of the arrowhead, 100% for gap = length).
Scatter Brush will give you undistorted arrowheads pointing with a slight inaccuracy.
Pattern Brush will give you bent arrowheads following the path accurately.

Does HP Pavilion p7-1154 support AMD Dual Graphics?

I have a Pavilion p7-1154 - Serial no.{Removed for privacy} - The motherboard is an AAHD3-HB (stock MB) made by Pegatron. I have upgraded the stock RAM from 6 GB of 1333 to 16 GB of Corsair Vengence 1600 and upgraded the processor from an AMD A6 3600 to an AMD A8 3850, all according to the upgrade guide for this machine from HP. I've also upgraded the PSU from the stock 300w to a Corsair 500w 80Plus Bronze certified PSU.
Now that's what I'done so far - what I want to know is does the MB (AAHD3-HB) support AMD Dual Graphics, using the suggested graphics cards, I would like to use a Radeon 6670 GPU.
Mike
This question was solved.
View Solution.

Mike, after consulting with other members, I believe that dual graphis is not available since it is not noted in the specs.
However, here is a Youtube video about the CPU. If you do find that you were able to use it by a BIOS change, please share that information with the forum. Thanks!
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Key flexfield - protecting one of the segment as NON-UPDATABLE/ READ-ONLY

Key Flexfield setup for "People Group Flexfield" consists of seeg1,seg2,seg3,seg4.
We would like to make Seg1 of this flexfield "READ ONLY" / "DISPLAY ONLY" / "Non-Updatable".
Please advise possible way of making this functionality.
I have tried, following but no luck :
1) Limitations of Forms Personalization [ID 420518.1]
Forms Personalization is not possible for any key flexfield structure or segments.
This is a limitation of Forms Personalization on Flexfield. There was an enhancement request Bug 5506506 - "PERSONALIZE FLEXFIELDS BY USING FORMS PERSONALIZATION" but it was rejected the enhancement request as this is not feasible. A Flexfield is a single field in a form but then when you click into it and it opens up the flexfields window, the multiple fields you see is actually a user exit with multi segment values, not form fields. No Form Personalization events are passed to flexfield windows (user exits). No Form Personalization events are passed to segments inside the flexfield window (user exit).
2) Key Flexfield Security Rules Enabled
Defining security rules on any segment in key flexfield makes all segments as read only. Per Oracle Document:"Defining security rule on key flexfield combination on one or more segments allows all segments to be not updatable"

In SSHR, I believe it is possible although I have not done it before, I have spoken to people who have.
You need to have access to jDeveloper and be able to open up the SSHR page in question. Find the internal ID of the flex item within the SSHR page in question.
Then you create a new item in personalization and set that new item to have the same ID as you retrieved from jDeveloper. Make that item read only and configured the 'default' flex to not show the segment in question.
That is basically the way this can be achieved but it is not straightforward and requires a cursory understanding of OAF.
I do not know if it is possible to do this in the PUI. Would be interested to know requirement behind essentially showing a static read only field in a professional form - can the admins not be trusted to leave it alone? One workaround would be coding a user hook or custom library to error if that field is updated. Not read only but would stop those pesky Administrators meddling with it!

Problem with non-updated idocs

Hi,
we have a problem after upgrading from 3.5 to 7.0. Lots of extractors end
in an error-message concerning non-updated idocs. Every day several
extractors have this problem. This are not always the same extractors. As
a result we must repair many extractions manually.
I know the procedure of how to repair, but I want te know how I can prevent
extractors from running into this problem in the first place.
Any suggestions?
This is the problem-message that we get...
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs
manually using the Wizard or by selecting the IDocs with incorrect
status and processing them manually.

It has been happening on our env as well (BI 7.0 SP 12), time to time one load or the other gets into this problem and it waits yellow for few hrs before turning red.
I can correct the IDOC and move on or run the load again it works fine.. but the process chain gets held up not going to the next stage for hrs..
any resolution on your problem..
thanks
Mayil

Photoshop CS6 have problems with my dual graphics card

I'm currently using photoshop cs6 on my laptop (hp pavilion dv4 3114 ), and this laptop has dual graphics cards(one is mobile intel hd graphics, the other one is ati hd 6750), it ususlly switches to the faster one when games are running or some software that requires a lot of graphic work. But this time I have already set in the graphics card profile to let photoshop use the faster one, but when I launch photoshop cs6 it tells me that the graphics card is not officially supported, as you can see this in the screenshot.
Then I turned to photoshop's preference(performence) and found it only identifies the mobile intel hd graphics. I'm currently using photoshop for designing large posters so performence is very important for me. Is anyone know how to solve this problem so that photoshop can run with the highest performence?

II can't imagine how these computer companies expect to fully integrate GPUs from two different vendors, but they're trying. To me, knowing a bit about how display drivers are implemented, it seems an impossible task.
I hve heard (in the context of Macs that have this option) that disabling the low power options so that only the more powerful GPU is active can help. I don't know if that can apply to your system, but it might give you an idea of a place to start looking.
Another thing might be to try to find whatever settings it offers for "affinity" and set it so Photoshop and its cousins use just the ATI GPU exclusively. It might be the "switchover" process that is causing the problems.
Good luck.
-Noel

How to get dual graphics card to work together?

I have an L series satellite with dual graphics card that wont work together. Its an AMD Radeon 3400m apu with an HD 6520G integrated , and a 6400m discrete graphcs card.
The 6400m will never turn on, I have used amd system monitor to see if it is ever used, but it never is.
Even when the 6520g is at full load it wont turn on.
Any suggestions would be helpful.
Thanks.

Hi
As far as I know this theme has been already discussed here in the forum and the switch between internal and external ATI GPU is not supported.
Just the Optimus technology designed by nVidia is supported
So you can switch between Intel GPU and nVidia (if both would support the Optimus technology)

Do all E545 laptop sub-models have dual-graphics?

Looking to purchase one soon, and will be used for occasional gaming.
I see the same sub-model listed on one site as having the HD 8570M along w/ the iGPU from the APU, but others do not. This is very confusing. To add to the confusion, the main product page for the E545 on lenovo's site shows it has it, but when you customize a unit, it doesn't.
If all E545s do NOT have dual-graphics, can I please have a list(US, CA, and international models) of all sub-model codes that do?
Thank you

You won't see the 6459 in the current Jan 2009 version because Lenovo only keeps the latest models on that reference source.
However, I found my answer at the ThinkPad Forum here:
http://www.thinkpads.com/forum/viewtopic.php?f=29&t=60786
It appears that there is indeed 256mb on the GPU in question and there are some typographical errors on the Product Info Pages.
Message Edited by eecon on 01-16-2009 12:14 AM
Two (I used to have Five) - T61p 15.4" WS T9300 2.5Ghz units, August 08/08 Builds with FX570M Nvidia Graphics; ... One W520 i7-2860QM w/2000M Nvidia Graphics (most recent acquisition and stupidly fast); .... One - T42 4:3 15" Flexview 1.8GHz with ATI Graphics (still perfect for traveling); ... Two - T500 15.4" units both with ATI HD3650 Graphics.

Setting check box (in detail block) as (non) updatable...

Hi,
I have a master-detail form. The form does execute a query when it opens. Now, according to a condition i want to do the check box(in detail block) as non- updatable.
I have tried to write the appropriate code in:
WHEN-NEW-RECORD-INSTANCE(in the master block level)
WHEN-NEW-ITEM-INSTANCE (in the detail block level)
POST-QUERY(in the detail block level)
but it does not work 'perfectly'. I mean that in most cases even one of the above triggers does not execute (for example the 'WHEN-NEW-RECORD-INSTANCE' but only after i click on this new record instance. I mean that after this on this new record the condition is estimated....)
or
it does execute but after i click on the checkbox (for example the 'WHEN-NEW-ITEM-INSTANCE').
The code i tried looks like the following:
if :block.item=<condition>
then
set_item_property ('detail_block.chk_box',updatable,property_false);
else
set_item_property ('detail_block.chk_box',updatable,property_true);
end if;I consider to use the WHEN-CHECKBOX-CHANGED trigger and code which looks like:
if <condition>=true
then
    /*i set the value of the checkbox as the opposite of what it is just after the click on it...*/
if :detail_block.chk_box=0
   then
     :detail_block.chk_box=1;
else
    :detail_block.chk_box=0;
end if;
set_record_property(currect_record,status,query_status);
set_item_property ('detail_block.chk_box',updatable,property_false);
end if;The truth is that i do not like very much this code, but is there any alternative...???
Note: I use Dev6i with patch 12
Thank you,
Sim

I build a little testform based on HR-schema-table DEMO_USERS and switch each second record to be not updateable, works without problems (code from POST-QUERY-trigger):
DEFAULT_VALUE('1', 'GLOBAL.SWITCH');
:GLOBAL.SWITCH:=3-:GLOBAL.SWITCH;
IF :GLOBAL.SWITCH=2 THEN
SET_ITEM_INSTANCE_PROPERTY('DEMO_USERS.ADMIN_USER', TO_NUMBER(:SYSTEM.TRIGGER_RECORD), UPDATE_ALLOWED, PROPERTY_TRUE);
ELSE
SET_ITEM_INSTANCE_PROPERTY('DEMO_USERS.ADMIN_USER', TO_NUMBER(:SYSTEM.TRIGGER_RECORD), UPDATE_ALLOWED, PROPERTY_FALSE);
END IF;     Edited by: Andreas Weiden on 31.03.2009 21:24

Non-updated Idocs found in Source System

Hi Experts,
I am getting an error Non-updated Idocs found in Source System
Plz help me to resolve this issue.

Hi
BD87 Update Idocs manually.
1. When you look in the Monitor screen for the first time on a day you mostly will see some Loads that have yellow traffic lights. When you click on the lowest line of the Load (with the time of Load start) you will get the next popup screen:
2. Here you can click on the "Yes" button. The Load specification window (right side of the screen) will now be filled with data.
3. You can now start the manual processing of the IDocs. You go to the "Details" tabpage of the right window. You right click on the line with the red traffic light stating "Request IDoc : IDoc ready to be transferred to application" on the "Details" tab page of the Load. In the option menu that appears choose the option "Update manually in OLTP" (click it).
4. You will get to the next screen (which is in fact a transaction in the source system (SAP R/3) where you can update the IDoc that is send by the source system)
5. Now click the "Excecute" button on the left of the screen (or press the F8 button on your keyboard). You will get to the next screen:
6. This states that the IDoc has been passed through to BW. You return to BW by clicking the "Back" button (or pressing the F3 button on your keyboard) twice. After the first time you will see the previous screen and after that the Monitor screen again.
7. You will now see that the Status of the Load has turned to yellow or green. When it is yellow you will have to wait a little time (the execution of the Load in BW is still running) and by clicking "Refresh Details" button on the left upper side of the screen (or pressing the F8 button on your keyboard) you will see the Load turn green.
Hope it helps

Dual Graphics in H535: Non-updatable ?

Similar Messages

Maybe you are looking for