Dual HD4850's and a pcie x1 at the same time?

Sup MSI..Heres a good question..I have a MSI K9A2 CF mobo and i would like to know if i can run dual cards in crossfire and a XFI pcie x1 sound card without problems?I know some motherboards when u plug in 2 video cards it disables teh pcie X1 slot.
Thanks
Yaiknowscrewme

News to me! You should be able to have a sound card in X1 slot, yes.
What I don't think you can do, is use the second SLI slot if you don't run crossfire. Normally that would mean, if you only have one graphics card let the second SLI slot (light blue) be empty.

Similar Messages

How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

Thanks for digging out the facts.
You have a 1st Generation Time Capsule.
Your model can produce two bands....either 2.4 GHz or 5 GHz....but not both simultaneously.
You would need a Generation 2, 3 or 4 Time Capsule for simultaneous dual band capability.

ASA 5505 as a SSL VPN Server and Easy VPN Client at the same time?

Is it possible to configure and operate the ASA 5505 as a SSL VPN server and Easy VPN Client at the same time? We would like to configure a few of these without having to purchase additional ASA 5505 and use a 2 device method (1 SSL VPN Server and 1 Easy VPN Client). Thanks in advance.

I don't think it is possible. Following links may help you
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml

Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad

TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

Can I save and open an attachemnt at the same time?

I want to be able to open an email with an attachement or attachments and click on the save button for the attachment(s), designate the location (folder) where they are to be saved - but also tell Mail to save the attachments then open them up on the desktop. Two operations in one. If you understand my request you understand what you have to do now - two separate steps. Save. Then find the saved files and open them.
OR
Open the attachment from the email which then downloads the file to your designated "all-purpose" location (not the ultimate location you'd want to save it). Then once you've seen it, you do the save thing with the original mail attachment and then have to go back and delete the file from the designated all-purpose download location.
This latter problem of having to delete unedited downloads manually could be solved with an option in Mail preferences to automatically delete unedited downloads in the "all-purpose" location after that same attachment had been downloaded to another specific location on your hard drive. This option for deleting unedited downloads does not exist, however.
But even if this step-saver option existed in the preferences, you still would not be able to tell your Mac to save a particular Mail email attachment to a particular folder AND open that attachment at the same time in one command.
That's what I want.
Maybe I want both. Save and open together plus the ability to automatically delete unedited attachment downloads in the "all-purpose" download file after the same attachment has been downloaded to another specific location on your hard drive.

with IOS 6 yes you will be able to do that

Can Express 9 play and record multiple instruments at the same time?

I have logic express 9 and was told with my interface that I can play and record different instruments at the same time on Express 9. Is this true because I have spent a long time trying to figure out how.

Hi,
to record multiple Inputs at a time, open up the appropriate number of audio tracks. Now for each track, select the correct Input in the Channelstrip.
Now, ARM all these tracks for recording by clicking the little red R in the track header or channelstrip. Now if you hit record, all these tracks should record simultaneously their respective inputs.
All other existing tracks should playback while recording.
Fox

My dad and i use the same apple id, when he recieves a call, hes phone and my phone ring at the same time, why?

my dad and i use the same apple id, when he recieves a call, hes phone and my phone ring at the same time, why? and how do i fix this

Settings > FaceTime > iPhone Cellular Calls > OFF

Can i listen to i tunes and use another app at the same time on ipad 4 ?

I've been trying to figure out how to listen i tunes, or listen to music on a web music site, and play a game at the same time, is that possible to do on an iPad 4 ?

I can listen to Tunein Radio and play Coin Dozer and Burst Bubble at the same time.
I can also play music on iTune an play Coin Doser and Bubble Burst at the same Time.

Labview runs CANBus and DNP3 software model at the same time

I have an ordinary computer which communicates with several DSPs (CANBus communiation) through Compact Rio. The physical connection is that the DSPs' CANBuses are connected together and connected into Compact Rio, then the Compact Rio is connected with a router through Ethernet, at the same time, the computer also connects with the Router through Ethernet. Based on this physical architecture, the computer can run CANBus software model on Labview to communiate with Compact Rio and DSPs.
As I know, the communication between the computer and the Compact Rio is not real time, and the communication between Compact Rio and DSPs can be real time, can you tell me if I get the right point?
Now we have another device named RTDS (communicate with outside through Enternet based on DNP3), and want to add RTDS into our system. I am not sure about the way to conduct the communiation. The main question is that we need to run Labview to communicate with DSPs through CANBus and RTDS through DNP3 at the same time, is that possible?
I proposed two possible ways to conduct communication, bt not sure if it is possible.
1. I proposed that I connect RTDS with the Router through Ethernet, and then the computer communicates with RTDS through the Router based on DNP3 and also keeps the communication with DSPs through Router, Compact Rio, CANBus and then DSPs. I am wondering if this kind of communication is available for Labview.
2. The second possible way I proposed is that I connect the RTDS with Compat Rio (CRio keeps connecting with DSPs through CANBus) through Ethernet, and then the computer communicates with DSPs through Router, Compact Rio and CANBus, and the computer communicates with RTDS through Router, Compact Rio and Ethernet. Also, the computer needs to run Labview with CANBus sofeware model and DNP3 software model at the same time. I am also not sure if it is possible.
The diagram of the communication system is shown in the attachments.
Attachments:
Commnucation system diagram.pdf ‏118 KB

To use Mail from multiple devices, your Mail Server needs to be using IMAP protocol (iCloud Mail uses that).
IMAP keeps the Master copies on the Server, not on the Mac the way most default POP Mail servers do.
To keep one Master Calendar, accessible from all devices, you need a web-accessible place to keep the Master Calendar. iCloud can do that.
¿Do you see a trend developing here?

[WIN7] Enable Microphone and "What U Hear" at the same time?

Hey folks!
I am trying to enable both at the same time on my Windows 7 in order to record Battlefield 2 and my own voice at the same time.
Please do NOT start with "do this and that", I have tried everything for at least 1 year by now and the only way to make it work is to have microphone and "What U Hear" enabled. Apparently it is not possible. In order to activate one of both you have to make it "Default" record device but then the other device gets disabled. Trying to record the disabled device obviously ends up in silence.
What is the reason for that and how to enable BOTH devices at the same time?
I am using PAX Drivers which the maker always updates to the latest Creative Drivers. So I am up to date.
Thank you a lot in advance.

Thank you for your reply.
Well, yes, the microphone is activated. And if I put the microphone playback volume to 100 I can hear myself talk even with "What U Hear" as my default recotding device. But once battlefield 2 starts it uses the default recording device for the in-game voice over IP. If I select "what U hear" as the default device it will basically put the game sound into the VOIP...
What I tried was - set microphone as default device, launch BF2 so it registers the microphone as VOIP input, then alt tab out, select What U Hear as default device but it does not get activated! I only see a bar at the microphone.
What I want is to be able to have TWO volume bars, in What U Hear AND Microphone so I can use the microphone for BF2 and What U Hear as gameplay-sound for my recording device.
In Windows XP this was possible. In Windows 7 this is missing.
The problem here is that once a recording device (the Default one usually) is being used by a program it BLOCKS the other recording devices.

Will the full version of adobe allow you to review and scroll 2 documents at the same time?

will the full version of adobe allow you to review and scroll 2 documents at the same time?

Sorry, I do not understand what you mean by "the full version of adobe". Do you mean Acrobat?
I am also not clear what you mean by "review and scroll 2 documents at the same time"; please clarify. Adobe Reader (and Acrobat) lets you open as many documents as you want, but if you press Page Down/Page Up on one document, it will not perform that action on the other documents at the same time.

How can I listen to itunes and play a game at the same time on my ipad 4?

How can I listen to itunes and play a game at the same time on my ipad 4? This means I need to run 2 apps at the same time itunes and my game. The game has its own sound control so I can turn off its sound while i listen to itunes tracks. But I don't know how to set it up so the ipad does both.

Anytime you open an app that has a persistant sound stream - a movie, a podcast, some games - it will overide the music app's stream. nothiong you can do to change it.

How can you listen to music and play a game at the same time?

How can you listen to music and play a game at the same time?
I am playing music, by starting the Crash Baandicoot Nitro Kart 3D game it shuts off the music playing. Is there a way around this?
It seems like this should be possible.
Message was edited by: RuthlessVengeance
Message was edited by: RuthlessVengeance

Select the music play list you want to listen to and start it playing. Go back to the home screen and start the app you want to use, music will stop. Press the home button two time quickly and it will bring up a simple control for controling the music. This works for me with all of the apps I have purchased including games. Just a note you can pull up the same music control if the iPod is a sleep and locked by pressing the button three times quickly.
Mike

Dual HD4850's and a pcie x1 at the same time?

Similar Messages

Maybe you are looking for