Dual-Host installation problem

Hi all.
I have two ITS server (6.20, pl.14): one server with two single-host installation (HRP and RCP istances) and one dual-host installation with agate component (ITZ istances); the other server contain the wgate dual-host installation (ITZ istances).
Single-host istances work correctly. The dual-host istance do not work correctly because the wgate (in dmz) call another agate, do not call the ITZ istances.
I think that during the istallation a wrong agate istances has been set.
How I can undestand which is the wgate component that can call tha agete component with ITZ istances? Because in the folder 'config', in the xml file, I'm able to undestand only for single-host istances.
Thanks,
Gianluca

Hello Simeone,
If I understand your question correctly, you're just trying to figure out where to set up the connection between the AGate and WGate.
On the WGate, under the \program files\sap\its\6.20\config\ItsRegistryWGATE.xml there is a section called "Instances". For the AGate section, you should put in the information of the AGate server for Host, PortAGate and PortMManager. These ports will be numeric values (39xx) and can be found on the AGate in the \windows\system 32\drivers\etc\services file.
Restart the WGate and you should be good to go.
Hope this helps.
Marty

Similar Messages

Dual boot installation problems

The dvd I created will not boot to setup 10. However, the setup files, etc. will work while in windows7 prof., but will not give me any options other than an upgrade. I don't want to ruin my 7 installation. I also tried to copy all the
files to a usb drive and boot from that...no luck.
any help would be appreciated. thank you

DF
You need to make the dvd boot. When you try to boot from the dvd or USB what happens? Have you changed the boot order to make the DVD/USB first?
Wanikiya and Dyami--Team Zigzag

Why or why not single-host installation?

Hi friends,
I'm collecting your opinions and experiences here... :)
Why or why not to install complete, i.e. both Infra and Mid-tier, AS release 2 on a single host? -does it not basically come down to hardware configuration? (if the cpu and RAM is "good" enough, then no problems)
And multi-host installations is mostly for expansion and segmentation reasons?
Thanks,
Fredrik

In my experience the reason NOT to do a single host installation is performance.
I tried doing a single-host installation on an NT box running dual Pentium 500mhz processors and 1GB of ram. Everything seemed to work just fine. The infrastructure went in one Oracle home, the app server went in another. All of the admin functions took forever. The EM website was a complete pain to use. The machine clearly was short on memory and short on CPU.
Keep in mind the infrastructure installation includes a complete application server, it's own instance of the Oracle database, plus a bunch of additional adminstration specific bits. It's a lot of stuff. The application server installation duplicates a lot. You end up running two instances of Apache, a bunch (5-10) instances of the J2EE container, etc.
The good news (for us anyway) is that the infrastructure installation can also be used to manager Oracle databases. It's instance of the Oracle database is the repository for the admin data. We were going to set up an dedicated box for Oracle Enterprise Manager anyway for our new 9i databases. So putting the infrastructure on it's own box ends up causing us no grief at all. Also we plan on running 4 instances of the app server (for various sites we have around the world). So again having the infrastructure on it's own box really makes sense for us.
To sum up, in my limited experience the single-host solution worked just fine (though it was not used in a production setting) but if you go that way you'll want a beefy box.

Installation problems on Solaris 9

I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp/ttainst_1/ttapkg.15978/pkg>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

from the diagnostic details:
Architecture           spso0509
Host           SunOS e220r 5.9 Generic_117171-17 sun4u sparc SUNW,Ultra-60
Package           Tarantella Secure Global Desktop Enterprise Edition for
SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Andrew
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Hangul
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Platform
Identity Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Security
Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Windows
Connectivity Pack for SPARC Solaris 2.8+ (4.10.903)
Bill Weir wrote:
Gavin,
Glad you're sorted. Can you confirm that it is 4.10.903 you are using
(not 4.00.903)? I'm concerned if this installation problem is still
present in the later version.
Bill
Gavin Westermann wrote on 31/08/2005 05:00:
Bill - that seems to have done the trick! the installation is now running.
Thanks so much for this.I am running a pair of Sun Ray 170's on my desk
here at home mated to an E220R. I am hoping to use Tarantella to be able
to access and run apps on a win3k server in the same rack.
Gavin
Bill Weir wrote:
Gavin,
This looks like a known problem with TTA 4.00.903 and some Solaris
patches which were distributed at about the same time. However, you say
you're using 4.10.903, and as far as I know the problem should be fixed
in that version.
You could try the workaround described in
http://www.tarantella.com/documentation/sgd/ee/4.0/install.html - search
for "tta_pkgadd" on that page and follow the instructions given there.
Regards,
Bill Weir, Sun Microsystems Inc.
Gavin Westermann wrote on 30/08/2005 05:06:
I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

Installation problem sap 4.7

hi all,
i got installation problem while installing sap 4.7 on my pc
the error is ,
INFO 2008-03-21 00:03:16
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2008-03-21 00:03:25
The 'saploc' share exists at directory 'F:\usr\sap'. Choosing drive F: as SAP System drive.
INFO 2008-03-21 00:04:51
Copying file E:/DUMP/db3/ker/NT/COMMON/OraVolatileDatabaseParameters.xml to: OraVolatileDatabaseParameters.xml.
INFO 2008-03-21 00:04:51
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.xml.
INFO 2008-03-21 00:06:02
Copying file E:/DUMP/db1/EXPORT1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
INFO 2008-03-21 00:06:02
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.XML.
INFO 2008-03-21 00:06:02
Copying file system node E:\DUMP\db1\EXPORT1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.
INFO 2008-03-21 00:06:02
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2008-03-21 00:06:02
Copying file E:/DUMP/db1/EXPORT1/DB/DDLORA.TPL to: DDLORA.TPL.
INFO 2008-03-21 00:06:02
Creating file C:\SAPinst ORACLE KERNEL\DDLORA.TPL.
INFO 2008-03-21 00:06:02
Copying file system node E:\DUMP\db1\EXPORT1/DB/DDLORA.TPL with type NODE to DDLORA.TPL succeeded.
INFO 2008-03-21 00:06:02
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2008-03-21 00:06:05
Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2008-03-21 00:06:05
Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2008-03-21 00:06:05
Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
INFO 2008-03-21 00:06:10
Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2008-03-21 00:06:10
Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2008-03-21 00:06:10
Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
INFO 2008-03-21 00:06:13
Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2008-03-21 00:06:13
Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2008-03-21 00:06:13
Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
INFO 2008-03-21 00:07:05
Package table created
PHASE 2008-03-21 00:07:11
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2008-03-21 00:07:11
SAP Web Application Server
PHASE 2008-03-21 00:07:11
Request common parameters of SAP System
PHASE 2008-03-21 00:07:11
Create operating system accounts
INFO 2008-03-21 00:07:12
Copying file C:/SAPinst ORACLE KERNEL/keydb.xml to: C:/SAPinst ORACLE KERNEL/keydb.1.xml.
INFO 2008-03-21 00:07:12
Creating file C:\SAPinst ORACLE KERNEL\keydb.1.xml.
INFO 2008-03-21 00:07:12
Copying file C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.xml to: C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.1.xml.
INFO 2008-03-21 00:07:12
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.1.xml.
INFO 2008-03-21 00:07:12
Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.1.XML.
INFO 2008-03-21 00:07:12
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.1.XML.
INFO 2008-03-21 00:07:12
Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.2.XML.
INFO 2008-03-21 00:07:12
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.2.XML.
INFO 2008-03-21 00:07:12
Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.3.XML.
INFO 2008-03-21 00:07:12
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.3.XML.
INFO 2008-03-21 00:07:12
Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1002 ACCOUNTNAME=sap-r3\SAP_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2008-03-21 00:07:12
Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1003 ACCOUNTNAME=sap-r3\SAP_ERP_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2008-03-21 00:07:12
Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1004 ACCOUNTNAME=sap-r3\SAP_ERP_GlobalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Global Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2008-03-21 00:07:12
Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1005 ACCOUNTNAME=ORA_ERP_DBA ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Operator Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2008-03-21 00:07:12
Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1006 ACCOUNTNAME=ORA_ERP_OPER ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2008-03-21 00:07:12
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
INFO 2008-03-21 00:07:15
Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1007 ACCOUNTNAME=sap-r3\erpadm ACCOUNTTYPE=USER DESCRIPTION=SAP System Administrator MEMBERSHIP=sap-r3\SAP_ERP_GlobalAdmin,sap-r3\Users,Administrators,ORA_ERP_DBA,ORA_ERP_OPER,sap-r3\SAP_LocalAdmin,sap-r3\SAP_ERP_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2008-03-21 00:07:15
Changing account ACCOUNTID=S-1-5-21-1960408961-1604221776-839522115-1008 ACCOUNTNAME=sap-r3\SAPServiceERP ACCOUNTTYPE=USER CONDITION=YES DESCRIPTION=SAP System Service Administrator MEMBERSHIP=sap-r3\SAP_ERP_GlobalAdmin,Administrators,ORA_ERP_DBA,ORA_ERP_OPER,sap-r3\SAP_LocalAdmin,sap-r3\SAP_ERP_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2008-03-21 00:07:15
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
PHASE 2008-03-21 00:07:16
Request operating system user information
INFO 2008-03-21 00:07:30
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2008-03-21 00:07:30
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2008-03-21 00:07:31
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2008-03-21 00:07:31
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2008-03-21 00:07:32
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2008-03-21 00:07:32
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2008-03-21 00:07:33
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2008-03-21 00:07:33
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2008-03-21 00:07:34
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
PHASE 2008-03-21 00:07:34
Adapt filesystem
PHASE 2008-03-21 00:07:34
Prepare check/adapt SAP instance filesystem
INFO 2008-03-21 00:07:34
File system node F:\usr\sap exists.
INFO 2008-03-21 00:07:34
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap/ERP exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap/tmp exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans/tmp exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans/EPS exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans/EPS/in exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans/EPS/out exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans/EPS/log exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans/bin exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans/buffer exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans/cofiles exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans/data exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans/etc exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans/log exists already. Nothing to do.
INFO 2008-03-21 00:07:35
File system node F:\usr\sap\trans/sapnames exists already. Nothing to do.
INFO 2008-03-21 00:07:35
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2008-03-21 00:07:36
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2008-03-21 00:07:36
Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
PHASE 2008-03-21 00:07:37
Extract archives
INFO 2008-03-21 00:07:37
Processing of all file system node operations of table t_SAPComponent_Archives_FORMS_SHARED succeeded.
PHASE 2008-03-21 00:07:37
Extract SAP System kernel archives
WARNING 2008-03-21 00:07:39
PROBLEM: 'SAPCAR' not found. CAUSE: Unable to find application via absolute path in filesystem. Application could perhaps be found using environment variable path or is really missing. Trying to call the application nevertheless.
INFO 2008-03-21 00:07:39
Creating file C:\SAPinst ORACLE KERNEL\SAPMMC.SAR.log.
INFO 2008-03-21 00:07:39
SAPCAR -xvgf E:/DUMP/db3/ker/NT/I386/MMC/SAPMMC.SAR, -R C:\SAPinst ORACLE KERNEL succeeded. (See output in './SAPMMC.SAR.log'.)
INFO 2008-03-21 00:07:39
While copying node C:\SAPinst ORACLE KERNEL/sapmmc.dll to C:\WINNT\system32/sapmmc.dll: source is not newer than the target. Nothing to do.
INFO 2008-03-21 00:07:39
While copying node C:\SAPinst ORACLE KERNEL/sapmmcada.dll to C:\WINNT\system32/sapmmcada.dll: source is not newer than the target. Nothing to do.
INFO 2008-03-21 00:07:39
While copying node C:\SAPinst ORACLE KERNEL/sapmmcdb6.dll to C:\WINNT\system32/sapmmcdb6.dll: source is not newer than the target. Nothing to do.
INFO 2008-03-21 00:07:39
While copying node C:\SAPinst ORACLE KERNEL/sapmmcinf.dll to C:\WINNT\system32/sapmmcinf.dll: source is not newer than the target. Nothing to do.
INFO 2008-03-21 00:07:39
While copying node C:\SAPinst ORACLE KERNEL/sapmmcms.dll to C:\WINNT\system32/sapmmcms.dll: source is not newer than the target. Nothing to do.
INFO 2008-03-21 00:07:39
Processing of all file system node operations of table t_SAPComponent_Archives_Copy_SHARED succeeded.
WARNING 2008-03-21 00:07:40
PROBLEM: 'SAPCAR' not found. CAUSE: Unable to find application via absolute path in filesystem. Application could perhaps be found using environment variable path or is really missing. Trying to call the application nevertheless.
INFO 2008-03-21 00:07:40
Creating file C:\SAPinst ORACLE KERNEL\DBATOOLS.SAR.log.
INFO 2008-03-21 00:07:40
SAPCAR -xvgf E:/DUMP/db3/ker/NT\I386\DBATOOLS.SAR, -R F:\usr\sap\ERP\SYS\exe\run succeeded. (See output in './DBATOOLS.SAR.log'.)
INFO 2008-03-21 00:07:41
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
INFO 2008-03-21 00:07:41
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
PHASE 2008-03-21 00:07:41
Create service ports
PHASE 2008-03-21 00:07:41
Generate instance profiles
PHASE 2008-03-21 00:07:42
Versionize default profile, instance profile and start profile
INFO 2008-03-21 00:07:42
Processing of all file system node operations of table t_SAPComponent_Profiles_FORMS_SHARED succeeded.
INFO 2008-03-21 00:07:42
Processing of adapt operation t_SAPComponent_Profiles_SHARED succeeded.
INFO 2008-03-21 00:07:43
'F:\oracle\ora81/bin/lsnrctl stop' returned with '0'.
INFO 2008-03-21 00:07:43
Moving file F:/oracle/ora81/network/admin/listener.ora to: F:\oracle\ora81/network/admin/listener.ora.bak.
INFO 2008-03-21 00:07:43
Creating file F:\oracle\ora81\network\admin\listener.ora.
INFO 2008-03-21 00:07:44
Moving file F:/oracle/ora81/network/admin/sqlnet.ora to: F:\oracle\ora81/network/admin/sqlnet.ora.bak.
INFO 2008-03-21 00:07:44
Creating file F:\oracle\ora81\network\admin\sqlnet.ora.
INFO 2008-03-21 00:07:44
Moving file F:/oracle/ora81/network/admin/tnsnames.ora to: F:\oracle\ora81/network/admin/tnsnames.ora.bak.
INFO 2008-03-21 00:07:44
Creating file F:\oracle\ora81\network\admin\tnsnames.ora.
INFO 2008-03-21 00:07:45
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2008-03-21 00:07:45
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\saptrace.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/saptrace with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\saptrace\background.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/saptrace/background with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\saptrace\usertrace.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/saptrace/usertrace with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapreorg.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapreorg with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\saparch.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/saparch with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\oraarch.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/oraarch with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapcheck.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapcheck with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapbackup.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapbackup with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\origlogA.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP\origlogA with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\mirrlogA.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP\mirrlogA with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\origlogB.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP\origlogB with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\mirrlogB.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP\mirrlogB with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata1\cntrl.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata1/cntrl with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\saparch\cntrl.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/saparch/cntrl with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\origlogA\cntrl.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP\origlogA\/cntrl with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2008-03-21 00:07:46
File system node F:\oracle\ERP/sapdata1 exists already. Nothing to do.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata2.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata2 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata3.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata3 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata4.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata4 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata5.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata5 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata6.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata6 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata1\erp_1.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata1\erp_1 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata1\erp_2.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata1\erp_2 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata1\erp_3.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata1\erp_3 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata2\erp_4.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata2\erp_4 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata2\erp_5.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata2\erp_5 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata2\erp_6.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata2\erp_6 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata3\erp_7.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata3\erp_7 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata3\erp_8.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata3\erp_8 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata3\erp_9.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata3\erp_9 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata4\erp_10.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata4\erp_10 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata4\erp_11.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata4\erp_11 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata4\erp_12.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata4\erp_12 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata5\erp_13.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata5\erp_13 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata5\erp_14.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata5\erp_14 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata6\erp_15.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata6\erp_15 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata6\erp_16.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata6\erp_16 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata1\erp620_1.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata1\erp620_1 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata2\erp620_2.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata2\erp620_2 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata3\erp620_3.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata3\erp620_3 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata4\erp620_4.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata4\erp620_4 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata4\erp620_5.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata4\erp620_5 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata5\erp620_6.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata5\erp620_6 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata5\erp620_7.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata5\erp620_7 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata6\erp620_8.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata6\erp620_8 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata6\erp620_9.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata6\erp620_9 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata6\erpusr_1.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata6\erpusr_1 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata2\roll_1.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata2\roll_1 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata3\temp_1.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata3\temp_1 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Creating directory F:\oracle\ERP\sapdata1\system_1.
INFO 2008-03-21 00:07:46
Creating file system node F:\oracle\ERP/sapdata1\system_1 with type DIRECTORY succeeded.
INFO 2008-03-21 00:07:46
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2008-03-21 00:07:46
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2008-03-21 00:07:47
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2008-03-21 00:07:47
Creating file F:\oracle\ora81\database\initERP.ora.
INFO 2008-03-21 00:07:48
Creating file F:\oracle\ora81\database\initERP.sap.
INFO 2008-03-21 00:07:49
Copying file E:/DUMP/db3/ker/NT/COMMON/INSTALL/INITSID.DBA to: F:\oracle\ora81/database/initERP.dba.
INFO 2008-03-21 00:07:49
Creating file F:\oracle\ora81\database\initERP.dba.
INFO 2008-03-21 00:07:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:07:50
Moving file F:/oracle/ora81/database/initERP.ora to: orig_init_ora_tmp.txt.
INFO 2008-03-21 00:07:50
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: F:\oracle\ora81\database\initERP.ora.
INFO 2008-03-21 00:07:50
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2008-03-21 00:07:51
Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
INFO 2008-03-21 00:07:55
See 'F:\oracle\ora81/bin/oradim -new -sid ERP -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
INFO 2008-03-21 00:07:55
'F:\oracle\ora81/bin/oradim -new -sid ERP -STARTMODE auto' returned with '0'.
INFO 2008-03-21 00:07:56
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:08:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:08:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:08:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:08:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:08:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:08:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:09:33
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:09:35
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:09:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:09:41
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:09:43
Moving file F:/oracle/ora81/database/initERP.ora to: orig_init_ora_tmp.txt.
INFO 2008-03-21 00:09:43
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: F:\oracle\ora81\database\initERP.ora.
INFO 2008-03-21 00:09:43
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2008-03-21 00:09:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:09:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:10:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:10:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:11:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:11:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:11:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:11:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:12:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:12:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:13:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:13:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:13:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:13:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:14:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:14:30
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:15:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:15:11
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:15:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:15:55
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:16:36
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:16:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:17:20
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:17:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:18:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:18:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:18:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:18:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:19:37
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:19:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:20:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:20:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:21:14
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:21:16
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:22:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:22:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:22:55
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:22:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:23:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:23:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:24:41
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:24:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:25:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:25:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:26:36
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:26:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:27:35
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:27:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:28:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:28:40
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:29:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:31:12
Task files created
INFO 2008-03-21 00:31:12
Command files created
INFO 2008-03-21 00:31:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:31:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:31:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 02:52:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 03:00:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 03:28:34
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 05:50:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2008-03-21 06:18:39
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL2.log
INFO 2008-03-21 06:18:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 06:18:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2008-03-21 06:19:40
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPCLUST.log
ERROR 2008-03-21 06:19:40
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPPOOL.log
INFO 2008-03-21 06:19:40
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 06:19:40
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2008-03-21 06:20:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX3.log
ERROR 2008-03-21 06:20:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSLEXC.log
ERROR 2008-03-21 06:20:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSRC.log
INFO 2008-03-21 06:20:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 06:20:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 06:20:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2008-03-21 06:21:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSDOCU.log
ERROR 2008-03-21 06:21:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSPROT.log
ERROR 2008-03-21 06:21:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPUSER.log
INFO 2008-03-21 06:21:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 06:21:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2008-03-21 06:22:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSLOAD.log
ERROR 2008-03-21 06:22:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAP0000.log
INFO 2008-03-21 06:23:03
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2008-03-21 06:23:03
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
ERROR 2008-03-21 06:23:07
FJS-00012 Error when executing script.
INFO 2008-03-21 00:31:12
Task files created
INFO 2008-03-21 00:31:12
Command files created
INFO 2008-03-21 00:31:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:31:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 00:31:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 02:52:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 03:00:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 03:28:34
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 05:50:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2008-03-21 06:18:39
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL2.log
INFO 2008-03-21 06:18:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 06:18:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2008-03-21 06:19:40
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPCLUST.log
ERROR 2008-03-21 06:19:40
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPPOOL.log
INFO 2008-03-21 06:19:40
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 06:19:40
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2008-03-21 06:20:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX3.log
ERROR 2008-03-21 06:20:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSLEXC.log
ERROR 2008-03-21 06:20:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSRC.log
INFO 2008-03-21 06:20:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 06:20:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 06:20:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2008-03-21 06:21:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSDOCU.log
ERROR 2008-03-21 06:21:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSPROT.log
ERROR 2008-03-21 06:21:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPUSER.log
INFO 2008-03-21 06:21:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2008-03-21 06:21:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2008-03-21 06:22:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSLOAD.log
ERROR 2008-03-21 06:22:57
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAP0000.log
INFO 2008-03-21 06:23:03
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2008-03-21 06:23:03
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
ERROR 2008-03-21 06:23:07
FJS-00012 Error when executing script.
any body can give the solution please
thanks
sareen

Sareen,
Seems you are having problem with the Export CD you are using for Installation.Change the Export CD,if possible try to download it from Service Market Place of SAP.
K.Kiran.

Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5

hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1          oracle localhost.localdomain localhost
::1          localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06

Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;)

Installation problems in MSCS ORACLE 10.2 ECC 6.00

I am writing to report some unexpected installation problems. I am installing SAP ECC 6.00 in a MSCS cluster environment (Windows 2003 / Oracle 10.2) in our production environment and I am having problems during the installing the central instance phase. The sapinst_dev shows the following error: CJS-30102 Checking the database for installation type failed, Also the jsourcecheck.log shows the following error: com. sap. engine. frame. core. configuration. Configuration Exception: Error while connecting to DB and java. sql. SQLException: Excepción de E/S: The Network Adapter could not establish the connection     at oracle. jdbc.driver. DatabaseError. throwSqlException (DatabaseError.java:112)
The database is currently running without any problem and all the services (SAP and Oracle) as well.
Following the installation guide, I performed the almost all the steps successfully:
     Oracle RDBMS, patches and Oracle fail safe software on both nodes (successfully)
     Install the central services instance for ABAP (ASCS) on the first MSCS node (successfully)
     Install the central services instance (SCS) on the first MSCS node (successfully)
     Cluster the first MSCS node (successfully)
     Install the database instance on the first MSCS node (successfully)
     Cluster the additional MSCS node (successfully)
     Install an enqueue replication server(successfully)
     Perform additional steps for the Oracle Fail Safe configuration (successfully)
     Create the Oracle Fail Safe group (successfully)
     Set up as shared database directory in your Oracle Home (successfully)
     Add the Oracle database resource to the Fail Safe group (successfully)
     install the central instance (Failed)
     install at least one dialog instance (not installed yet)
As you can observe, I have performed the create oracle fail safe group activity first and then the install the central instance later. Reading the sap note 967121 today, I just realized that there is a wrong installation sequence; the sap note 967121 (actualized date: 17/OCT/07 ) says that you must install the central instance before you create the Oracle Fail Safe group. Is this sequence compulsory? Or can I continue the installation process?
If this sequence is compulsory do I have to reinstall all the predecessor activities or should I undo just the create oracle fail safe group activity?
Please let me know if the error which is showed in the installation of the central instance phase is because the wrong sequence or it is due to another reason.
Our cluster configuration is:
4 network card
Public network cards:
Ip:192.168.2.240 (hostname: ccaribe3rp1, Node A)
Ip: 192.168.2.241 (hostname: ccariber3p2, node B)
Private network cards:
Ip: 10.10.10.1 (hostname: ccaribe3rp1.ceramicascaribe.com, node A
Ip: 10.10.10.2 (hostname: ccaribe3rp2.ceramicascaribe.com, node B
Clustergroup:
Cluster group name: SAPPRO
Cluster group Virtual IP: 192.168.2.239, network name: SAPPRO (subnet mask 255.255.255.0)
SAP cluster group:
Sap clustergroup virtual IP: 192.168.2.238, network name: sapgrp (subnet mask 255.255.255.0)
Database cluster group:
Database cluster group virtual Ip: 192.168.2.237, network name: dbgrp (subnet mask: 255.255.255.0)
We have performed the mapping of the host names to the IP addresses on the windows host file already.
I would be very grateful if someone kindly can help me to solve this problem.
Best Regards
Boris Romero

Hello Boris,
one of the main problems is that step
"Create the Oracle Fail Safe group (successfully)"
cannot be successful because you need to run configtool and change the secure store as described in installation guide. At this stage the configtool does not exists (documentation error for ECC6.0 guide), so the correct sequence is to install CI and cluster the DB, but not vice versa.
Which stage is the sapinst braking up?
Is this beginning, middle or end of installation?
Did you try to run configtool and modify secure store?
best regards

Post installation problems in vista 32bit

Sir
i am newbie.i installed 10gr2 in my vista,but sometimes its starting perfectly and sometimes not.Then i need to restart my machine and then only i am getting access in sql*plus.i have posted it here but the problem is still the same.[post installation problem its not solved yet|http://forums.oracle.com/forums/thread.jspa?threadID=930824&tstart=0] .
when the command maintained bellow is leaving no output at all.
emctl start dbconsoleIN the service panel is showing dbconsole status as server starting only.
what to do?
regards
Sayantan

Hans F wrote:
1) Vista is not an operating system. It is a family of operating systems. Which operating system within that family are you using?windows 7.
>
2) Oracle Database is designed to work on a server. It should have a static IP address and host name, or at least use a loopback adapter as a workaround. How is the IP address and host name on your Vista-xyz assigned?
using it for local machine in laptop.
HOST = FAXCOOLWAREZ037)(PORT = 1521)
>
Hopefully you are not using DHCP to assign the IP address, or you were sharp enough to install the loopback adapter first.

PSE9 Installation problems

I've just purchased a tablet that comes with a host of programs, one of which is PSE9, which I am trying to install, with no luck. The installation almost completes but stops at "Shared Technologies" and rolls back the installation. I've tried multiple times with the same problem. I've gone though the installation problem checklist and the problem still persists. I've closed all other Adobe programs and triple checked the processes tab of the Task Manager to make sure no other Adobe programs are running. I've also tried the advice offered in this thread with no luck. I do not run any other Photoshop programs; this is my first purchase in quite some time.
I'm not very good with computers, but I am running Windows 7 64-bit with 32.2GB free.
Please help! I'm at the end of my rope.

I should have been more clear! I mean I have purchased a drawing tablet that comes with a CD to install PSE9, not a handheld tablet.
@Bill: I might have missed something when shutting off my anti-virus, so I'll try it again and report back.
Edit: Nope, it still rolls back the installion at Shared Technologies even when I've made sure my anti-virus is completely off.

Informatica installation problem - pinging the domain

Hi,
I am trying to install informatica and seem to be hitting a common installation problem.
I get to the 'Domain Configuration' point and the installation halts @ the 'Pinging the domain'.
After a few attempts, it comes back with the error 'Host:Port [MC:6001} has failed to ping back.
As an aside the service is created, starts OK and then fails.
All the Oracle side of things is fine and the objects have been created in my informatica schema.
I have seen a few posts with the same issue, but no one has a definitive answer.
Any help greatly appreciated.
Thanks.

Hi,
Try to use the IP address instead of host name. I got it resolved wen i did this.
Rgds,
Sid

Removing J2EE stack from dual-stack installation

Hello.
Does anyone know if it's possible to remove the JAVA-stack from a ERP6.0 dual-stack installation ?
We have a ERP 6.0 system running HCM services. The ERP system is installed as dual-stack, but the JAVA-stack is not in use as we also installed a separate NW 7.0 JAVA system hosting portal and java hcm services.
Thank you.
Gerhard.

Hi,
Yes, you can drop Java part from existing dual stack system.
1) Stop cenrtal service instance and all dialog instances of your system.
2) Also, stop J2ee engine of CI from SMICM.
3) Hash out all Java parameters in your default and instance profile (like j2ee, exe/j2ee, exe/jlaunch, jstartup etc.)
4) Delete central service instance.
5) Delete Database schema
6) Delete directories (/usr/sap/<SAPSID>/DVEBMGS<xx>/SDM and /usr/sap/<SAPSID>/DVEBMGS<xx>/j2ee)
Thanks
Sunny

Restart the Java-Engine in a dual stack installation (java+abap)

Hi,
how is it possible to restart or start only the j2ee-engine in a dual stack installation. We have a JAVA- and a ABAP-Stack and want only restart the JAVA-Stack. In windows i can use the MMC of SAP but how is it possible in UNIX.
regards,
sharam

Hi Eric,
i konw this TR, it doesn't work. There are two possibilities:
restart j2ee-local
restart j2ee-global
we try it with j2ee-local because we use a dual stack installation. What could be the problem. Is there an other possibility? How can i restart the j2ee-engine directly on my unix machine?
regards,
sharam

MinSAP Basis installation problem

Hi Gurus,
I am a total newbee to SAP and ABAP and am trying to install minisap on my pc so that i can practice ABAP.
I have installed the MS Loopback adapter and have updated the Hosts files as follows
127.0.0.1 localhost
10.10.10.10 MYCOMPUTER
The name of my computer is "MYCOMPUTER"
During installation i get the following error message
Error: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup
       can not get information for host "MYCOMPUTER"
Error: CENTRDBINSTANCE_NT_IND ColdKeyCheck
       Phase failed
Error:Main {}
       Installation aborted
Please can anyone help. I have checked existing posts and have tried some of the solutions but it has not helped. I still get the same problem.
Thanks in advance.

Hi,
[|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/minisap-46d-installation-problem-1529311#]
Solution to your problem..... I've tried just about everything
to get minisap running on Vista. Finally to get it to work you
need to install Virtual PC 2007. Create a Virtual XP PC with
(512mb ram if possible) and 10gb hard drive.
After creating the virtual XP. Start it and insert your XP Cd it
will install XP on your Virtual machine. After that remember to
follow the right installation procedure (1)Loop back Adapter, IP
Address (2) Host File editing (3) Sap DB Installation (4) Sap
GUI installation (5) Enjoy programming on SAP
Cheers.
...Reward if useful.

Minsap Installation problem

Hi friends,
i am getting this error while installing minsap on my home PC.
Error: CALCRAM_NT_MSS ColdKeyCheck 2 178
Phase failed.
Error: Main {} 2 178
Installation aborted.
any solution?
thanks in advance...

Hi,
[|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/minisap-46d-installation-problem-1529311#]
Solution to your problem..... I've tried just about everything
to get minisap running on Vista. Finally to get it to work you
need to install Virtual PC 2007. Create a Virtual XP PC with
(512mb ram if possible) and 10gb hard drive.
After creating the virtual XP. Start it and insert your XP Cd it
will install XP on your Virtual machine. After that remember to
follow the right installation procedure (1)Loop back Adapter, IP
Address (2) Host File editing (3) Sap DB Installation (4) Sap
GUI installation (5) Enjoy programming on SAP
Cheers.
...Reward if useful.

Sun, take responsibility for appserver7 installation problems!

*** First set of problems...
I'm having installation problems on both Solaris 8, (Ultra 480, 1GB RAM, latest recommended patches) and a Windows 2000 Server with SP2 (1GHz P4, 512MB RAM).
I chose default installation directory and then the install
complains that Pointbase 4.2 should be installed into the
same directory etc. Cannot unselect the Sample apps and
Pointbase options.
*** Second problem...
I have an instance previously installed on Windows 2000
Professional with SP2.(1GHz PIII, 512MB RAM, 5GB space)
When i start application server 7.0 , then i get the following
message:
Could not start the instance: domain1:admin-server
Server failed to start:abnormal subprocess termination
Could not start the instance: domain1:server1
Server failed to start: abnormal subprocess termination
Could not start one or more instances in the domain:domain1
Could not start one or more domains
Press any key to continue ...

When you say that you choose the default installation directory and then the installer complained about Pointbase, what platform where you using? Had you already attempted installs in the past or uninstallations that did not complete properly?
For your second issue, did you happen to change the host name of your machine? Try cranking up the log level (edit server.xml) to see what's causing the instances to fail on startup. Did the application ever start up after install? What things did you do just prior to the server exhibiting this behaviour?

Dual-Host installation problem

Similar Messages

Maybe you are looking for