Dual layer break point not working with 4.1

Hi, I recently made a dual layered dvd in DVD SP 4.03. I set it to automatic, and OTP and unchecked the "seamless". All was well, I burned a couple DVDs no problem. Then, I got in the mail FinalCut Studio upgrade which upgrades DVDSP to 4.1. So I upgraded and then ran software update to get to 4.1.1.
Now, the same project won't burn because it reports an error due to the break point, even when I set it manually, it won't work.
Any thoughts?
thanks

A dialog box pops up and says "Formatting was not successful. A suitable marker could not be found in the required layer break range. See the DVDSP User's manual for more info."
The log says the following "Compile Completed Successfully
Warning: The file ‘BSGDISKTWO.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Formatting finished.
Formatting was not successful. A suitable marker could not be found in the required layer break range. See the DVD Studio Pro User's Manual for more information."

Similar Messages

Dual-layer break point is not cooperating!

I have authored a dual layer disk. I have tagged chapter 18 as the dual-layer break point. In the project chapter 18 is clearly tagged properly, including the little black dot appearing in the proper place on the timeline. But after the disk is burned, which I am having to do using Toast and and external burner, the dual-layer break point is happening on chapter 19. Does anyone know why this would be happening. Thanks in advance for any help you can provide.

As a follow-up to Jake's answer, the reason Toast does its own thing with respect to the dual layer break point is because the .img file that DVDSP saves does not contain any break point information. So, you'd have the same problem with any burning program, not just Toast.
This is on p. 584 of the DVDSP 4.1 manual, if anyone's interested.

Dual Layer Break Point problem

Hi,
I just found out after I updated DSP 4 to version 4.0.3 my Layer 1 on every project since updating gets corrupted!
I thought it was the Dual Layer discs I used that caused the problem, but after I re-installed DVD Studio to the original version 4.0.0 the same project worked perfect.
Anyone else have issues with Dual Layer Break Point after updating to 4.0.3?
I have tried different chapters as layerbreak points on my project, and even a test project, with the same result. The finished discs is barely playable on some DVD players, showing wierd interference and noise, and DVD Player on mac crashes when reaching the dual layer break point, and the plant i send the master have a software to check DVDs and they said that it couldnt find/was corrupt Layer 1 on one of my discs. Hope someone can fix this, DSP is the best software otherwise!
Best regards,
Mats.

DVD+R or DVD-R?
http://documentation.apple.com/en/dvdstudiopro/usermanual/index.html#chapter=1%2 6section=9%26tasks=true
DVD+R Double-Layer
You can use DVD+R double-layer media, often referred to as DVD+R DL, for burning your dual-layer projects. With DVD+R double-layer media, DVD Studio Pro places the layer break point and sets the switch point to be nonseamless as specified in your project.
DVD+R double-layer discs require you to use the Opposite Track Path (OTP) direction setting when burning the disc. This means that the first layer must be larger than the second layer. See Setting the Dual-Layer Direction for more information.
While DVD+R double-layer discs allow you to burn your dual-layer projects, they tend to have more compatibility issues than the other types of DVD media.
DVD-R Dual-Layer
If your system contains a DVD drive that can write to the new DVD-R dual-layer media, you can burn your DVD project to it with DVD Studio Pro. However, there are several issues:
Because currently DVD Studio Pro has no way to identify DVD-R dual-layer media as having two layers, burning a dual-layer project to it results in the appearance of an alert message telling you that the DVD media may have insufficient room to hold the project. This message is based on the assumption that the disc is single layer. Both layers of the disc will be written to as needed, however, when you click Continue.
If you are burning a dual-layer project, the break point you set will not affect where the layer break actually occurs. Instead, the first layer is written to until filled, at which point the drive switches to writing to the second layer.
The switch between layers is a seamless layer change not supported by some DVD players, which may stop playing the disc when the switch point is reached.
Important: Do not use DVD-R dual-layer media unless these issues do not impact your project.

Dual Layer Break Point?

So, I found the perfect dual layer break point in my project. I have a 3 hour 58 minute video to put on DVD and set the layer break point at 2 hours 2 minutes. However, when I went to format the disc, it told me that layer 0 was too large.
When using the automatic setting, it told me the same thing.
What is the key to setting a layer break point?

Hi Graiai,
The basic rule is to ensure that layer 0 is larger than layer 1. And obviously to set it at a point where it's not very noticable (especially for those naughty players which take a moment to refocus and have non exitent buffers).
But there are also strict guidlines as to the positioning of the point and also how much larger the second layer is. Jim Taylor's DVD Demystified is a good place to start if you are thinking of doing some serious authoring.
TO overcome your particular problem you need to find another appropriate point closer to the head of the track. I use DVDAfterEdit which takes all the guess work out for this. But for you at this stage it will be a bit of trial and error until you can get a build done.
Let me know if you need more help.

Dual Layer Break Point Q

If I allow DVDSP to automatically set the Dual Layer break Point, is it possible for me ti find where it placed it?
It would probably be pretty obvious in the average project but I am working with a project with about 40 video assets and is very interactive so it jumps around all over the place.

After you build the project and then go to format for DVD-R etc you will see the setting for DL break point (it is set to automatic), but you can then click to see acceptable DL break points (markers).
DVD SP defaults to last acceptable marker that fits on the first layer

"Dual Layer Break Point" drop down window is greyed out

Hi All,
I have a 6.8 GB project ready to be burned to disc. The Build went fine but when I try to format, I chose Format > Disc Volume > Red Laser > Dual > OTP> Dual Layer Break Point > TRack 1 and then all the 10 chapter choices that I have to choose from are grayed out. I can't make a choice to place my break.
I wouldn't think that selecting automatic would work if DVD Studio Pro has grayed out all the choices. Now, I don't know even if I try using the long method would work.
Even still, I would like to know why this happened. This has never happened before over a 3 year period.
I am using Memorex DVD+R DL discs (worked fine in the past).
Any remedies?

Some background -
There has to be a break point where it crosses over from Layer 0 to Layer 1, if you have no Chapter Markers at all (or a limited number of Markers, none of which fall near the point which is a bit more than half the size of the assets you will get an error that a Layer is the wrong size or all markers will be greyed)
What you do is
1.) Set up markers in the areas where your would guesstimate the Layer Break(s) should be
2.) Build the project (but not format)
3.) Format a Disc (in the dialog that comes up, click on advanced tab, then where it says break point, use the pulldown which will have all valid breakpoint markers dark/black, while non-valid Layer Break Markers will be faded) If no marker is black there is no marker in the right place, regardless of you use automatic or not. You will need to insert more markers, and guesstimate again.
4.) If the layer break(s) are not where you would like them (in other words a place where they may be more noticable) use VTS view to re-order then go back to step 1.
When you do enough DLs, you start getting a sense based on the size of tracks where things should land

DVD Studio Pro Dual Layer Break Point Problem

I have a problem with a disc that I am burning. It is a dual layer (the break point is not set to seamless) with 1 movie that is about 3.6 GB and 1hr 23 min long, a 30 min slideshow, another 30 min extra and five other extras that total to about 20 min. I put the dual layer break point at the beginning of the slideshow, everything played fine on the computer, but on the Panasonic DVD player it just freezes at 35 seconds into the slideshow. Its never had a problem with DLs before. Itried the DVD on my softmodded Wii, on a program for it called WiiMC (it uses Mplayer) and everything played fine. I tried another burn where i set the break point to fifteen minutes before the end on the main 1:23 movie and on the DVD player it still froze at 35 seconds on the slideshow. Is there anything that you guys can suggest to help?

DVD+R or DVD-R?
http://documentation.apple.com/en/dvdstudiopro/usermanual/index.html#chapter=1%2 6section=9%26tasks=true
DVD+R Double-Layer
You can use DVD+R double-layer media, often referred to as DVD+R DL, for burning your dual-layer projects. With DVD+R double-layer media, DVD Studio Pro places the layer break point and sets the switch point to be nonseamless as specified in your project.
DVD+R double-layer discs require you to use the Opposite Track Path (OTP) direction setting when burning the disc. This means that the first layer must be larger than the second layer. See Setting the Dual-Layer Direction for more information.
While DVD+R double-layer discs allow you to burn your dual-layer projects, they tend to have more compatibility issues than the other types of DVD media.
DVD-R Dual-Layer
If your system contains a DVD drive that can write to the new DVD-R dual-layer media, you can burn your DVD project to it with DVD Studio Pro. However, there are several issues:
Because currently DVD Studio Pro has no way to identify DVD-R dual-layer media as having two layers, burning a dual-layer project to it results in the appearance of an alert message telling you that the DVD media may have insufficient room to hold the project. This message is based on the assumption that the disc is single layer. Both layers of the disc will be written to as needed, however, when you click Continue.
If you are burning a dual-layer project, the break point you set will not affect where the layer break actually occurs. Instead, the first layer is written to until filled, at which point the drive switches to writing to the second layer.
The switch between layers is a seamless layer change not supported by some DVD players, which may stop playing the disc when the switch point is reached.
Important: Do not use DVD-R dual-layer media unless these issues do not impact your project.

Dual Layer Break Points

Ideally, I would like to create my own break point. Using the OTP method, I know that I need to have the 1st layer larger than the second. Can I simply choose a break just over the 1/2 way in my Movie? ie. 1hr32 long for the first layer, 1hr28 long for the second...or does it have to be close to the 3.9Gig mark before changing layers? My break point of choice happens to be the only place that I have a fade to black, that's why it makes it ideal.
I also have several Chapter Markers in the Movie (that don't fade to black)..so if I choose the Auto Break Point option, I don't know how find where the program has chosen to break it at. I want to view before I burn..or atleast know where it is. Is this info in the Build folder somewhere?
Thanks in advance!!!!
Heather
Mac OS X (10.4.2)

when you click on any chapter marker, the property inspector allows you to assign it as a dual layer break point. layer 0 must be larger than layer 1. Also you can place a marker and in the property inspect uncheck chapter marker and check dual layer break point.

Dual Layer DVD's not burning with Disk Utility

I successfully created two dual layer DVD's with a disk image that I created in iDVD. Checked both of those disks in a DVD player and both work fine. Now trying to burn more copies with the same procedure, same disk image file, same media manufacturer and all are failing. Any ideas? I can still successfully burn short videos on regular DVD's from iDVD so my burner has not completely failed. I had created a disk image out of the material that I need on the dual layer DVD because it's about 2 hours of video and iDVD was ejecting the disk too early without burning.

Sounds like the burner may have failed. It can fail in a way that only larger items cannot burn. Take it to your nearest Apple Store or Apple Authorized Service Provider to have them check it out

Dual Layer DVD burns not working......

I tried 4 different times, but to no avail. I took one of the burns & utilized a program to extract the Video_TS file, then used Toast to burn it - failed on verification (Toast has never burned a dual layer disc successfully for me on either of my burners). Is there a problem with iDVD not encoding discs properly when using dual layer media? That stuff is expensive & I get tired of creating 80 cent coasters. The other thing that bugs me is that the Apple factory burner only supports DVD+DL media (I will be rectifying that soon with a different internal burner - a Pioneer, not a crappy Hitachi). Any input into this problem will be greatly appreciated. Thanks in advance.

hey ara,
it's not about a disc that will work like all pressed discs out there.
it's just that most dual layer discs are dvd+r and most set-top dvd players can only read dvd-r discs.
if you want to look at your burned dual layer discs, look at them in a computer environment.
the lack of compatibility has nothing to do with DVDSP.
Mikey

Break points not working on copy and paste

It looks like copy and paste is not a good option between break points, is that right?

Copy and paste (as well as duplicate) should work across breakpoints. When you select something it will copy all the styles in all the breakpoints for just that object. For example if you have a page with two breakpoints you have an object that is different in both of them, then when you copy that object and paste into a new page you should get both breakpoints. However if you have a document with two breakpoints and you have an object that is the same in both of them, then when you copy and paste into a new page you won't get one of the breakpoints because that object didn't need it. If this is not what you are seeing then it could be a bug. To tell for sure you can post more steps and details about what you are trying to do.
Hope that helps and thanks for using Reflow!
Chris

Dual Layer break point - multiple videos

I have 4 videos to go one the DVD, comes to 8.5 GB in total.
1. 45mins
2. 1hr 15mins
3. 40 mins
4. 35 mins
How do I know which video to put the break point on and at what time.
I've been using trial and error for the last couple of days now and error keeps winning.
All I keep getting are various Error messages, this is my most recent
+Formatting was not successful. Layer 1 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.+
Thanks in advance
John E
Message was edited by: John England

It could be that you have exceeded the disc size, but assuming you haven't there has to be a break point where it crosses over from Layer 0 to Layer 1, if you have no Chapter Markers at all (or a limited number of Markers, none of which fall near the point which is a bit more than half the size of the assets you will get an error that a Layer is the wrong size.
What you do is
1.) Set up markers in the areas where your would guesstimate the Layer Break(s) should be. (You can build the project and use VTS view to see where about halfway plus a bit is located and make sure to put a few markers in the track in that VTS. Take a look [here|http://dvdstepbystep.com/vts.php] for looking at VTS and builds to see a bit more on that.)
2.) Build the project (but not format)
3.) Format a Disc (in the dialog that comes up, click on advanced tab, then where it says break point, use the pulldown which will have all valid breakpoint markers dark/black, while non-valid Layer Break Markers will be faded) If no marker is black there is no marker in the right place, regardless of you use automatic or not.
4.) If the layer break(s) are not where you would like them (in other words a place where they may be more noticable) use VTS view to re-order then go back to step 1.
If you have not made audio AC3, you should encode to AC3.

Debug Break Points Not working - Attn Shay

I have one application that when run can navigate to another application. I am trying to debug the interation between the two applications. When I start the first application in debug from within Jdeveloper (embedded OC4J) and then navigate through a link to the second application I am not hitting the break points set up in the app module of the second application. Is there any thing special I have to do to have the break points in the second application visible to the first application?
I am running JDeveloper 10.1.3.2.0, with ADF BC applications.

I am a little confused. Are there parameters that have to be added to the configuration on the OC4J embedded server. It looks like from Shay's doc that parameters were added to kick off java externally.
Also, I did add the xml in Shay's doc to the embedded OC4J global-web-application.xml file and it errored off. Does the code need to go under the *.JSPX mapping seen below? Do any changes need to occur to the xml, customizations?
<servlet-mapping>
<servlet-name>JDevOJSP</servlet-name>
<url-pattern>/*.jsp</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>JDevOJSP</servlet-name>
<url-pattern>/*.JSP</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>JDevOJSP</servlet-name>
<url-pattern>/*.jspx</url-pattern>
<url-pattern>/*.jsp</url-pattern>
</servlet-mapping>

Dual HP touch screens not working with t620

HI, I have two L2206tm touchscreens on a t620 thin client running ThinPro 5.1.0. When connecting two monitors, the touch screens function erraticly or not at all. If you only connect one touch screen, it works okay (either monitor, so it's not a problem with the monitors). Some notes:The touch screen applet that's included with ThinPro has a calibrate button is shadowed out. The touchscreens are recognized in the USB as 1 device in the ThinPro USB mgr. (TPV - OpticalTouchScreen)Both touchscreen work when the settings for monitor 1 and 2 are setup as "Same As Primary" (meaning that the displays are mirrored. As soon as you set one of the monitors to be Entended (right or left), the touchscreens stop working.Any help would be greatly appreciated. -Chris

Hi,
The numbers are fine
Try the following.
First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this. Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Anchor point not working with pinned page navigation link

Anchor point at top of page, named top, does not function when clicking on pinned navigation link text. Correct link has been made in the Links menu. What procedure might overcome this functional problem?
I have the same type of anchor point named 'top' on other pages and the pinned navigation link works fine on those pages. For some reason only one page shows this problem.
Thanks,
Tim

Try moving the 'top' anchor down a little bit. I have run into a few issues when the anchor was to close to the top of the canvas for example JS not smooth scrolling, it would just jump to the top or it would not do a thing like what you are experiencing.

Dual layer break point not working with 4.1

Similar Messages

Maybe you are looking for