Dual Layer Disk

Hey!
I am trying to create a Dual Layer video DVD. I've created a project in iDVD, and have exported it to a disk image.
When I did that, it told me that doing this would make a disk image that could possibly not play in other players.
When I was finished with that disk image, I created a new R/W disk image in Disk Utility. I set it up with a custom background, and a few different files and folders for DVD-Rom content. (I wanted to do this rather than use iDVD's DVD-ROM feature, as iDVD's DVD-Rom feature is quite limited.)
Anyway, after I finished up, I copied over the VIDEO_TS and AUDIO_TS folders from the image iDVD created, and ejected the disk image.
Using Disk Utility to burn the disk image to a DVD+R DL disk, I ended up with a disk that was only readable in my DVD+R DL equipped MacBook Pro. I also found that the DVD Player application opened, but said "Disk Type unsupported" or something similar, however I was able to get it to play my disk by choosing "Read from a VIDEO_TS folder" in the file menu, and selecting the VIDEO_TS folder from my newly-burnt DVD.
Does anyone know what I can do to solve this problem? Does it have anything to do with me not making the disk image read-only when I was finished?
I simply want a nice looking folder to open on Macs for the DVD-ROM content, and not have all the DVD-ROM items stuffed into a "DVD-ROM" folder, as iDVD does for me.
Any tricks hints or suggestions would be welcome ASAP. I have a 50-disk production run who's deadline is this Friday (May 18th).
Thanks in advance!

I think if I were attempting to do all this I'd first try using Roxio Toast if you are not pleased with the way iDVD6 adds data to the DVD Rom content area. Here's Toast 7 instructions for doing the same procedure:
Click Here
I really need to be able to NOT sit and wait for iDVD to encode forever whenever I need to re-burn this disk.
Suggest making a Disc Image first thru the file menu on iDVD and use Roxio Toast or Apple's Disc Utilities for the actual burn at 4 x or slower. Remember to lower the burn speed when you go to burn a DVD thru either of the above apps. (Slower is better).
Good luck.

Similar Messages

  • Best External dvd burner for dual layer disks?

    Hi everyone,
    At some point my internal dvd burner in my mac book pro died, and apple replaced it. After that, I couldn't burn a dual layer disk. They've changed it twice more to accomodate me (the genius bar is awesome), but I still only have mediocre results. No problem burning regular dvds or cds. So I wondered is there a REALLy good external burner for DVD-DL that you have experience with? Thanks!

    A good bootable multi-interface enclosure (empty) for an external CD/DVD drive will run about US$70.
    http://eshop.macsales.com/item/OWC/MRSFW8U2RF/
    They also sell SATA drives pre-installed in that same enclosure.
    Many users find installing an internal drive themselves no more difficult than doing a memory upgrade themselves.
    Others prefer not to work inside their computer.
    Based on your graphics card and the original drive, I expect your Mac Pro is an older model. All before 2009 accept an ATA INTERNAL drive such as this:
    http://eshop.macsales.com/shop/superdrive/Mac_Pro_Xeon
    That page also has a video of how to install a replacement DVD drive.

  • Dual layer disk, single layer capacity! What am I missing

    Greetings,
    I have a project which is 6GB in size, so I'm burning onto a dual-layer DVD which 'Project Information' says is ~7.2GB in size. For the record this matches what 'More Info' gives me when I insert a blank disk and check the details from the desktop DVD icon. I also select 'dual layer' in the Project setup.
    Problem is that this seems to truncate at ~4.9GB.
    If I get 'More Info' from the burned DVD it says that the capacity is 4.9GB and it's full.
    What am I missing here?
    Any help greatly appreciated.
    jon

    I guess for the same reason that completing the iDVD
    tutorial isn't compulsory...
    ...which, of course, everyone reads dutifully... however, at the risk of sounding trite, while the manual says "select Best Quality when recording dual-layer disks" it doesn't add the killer-qualifier "... otherwise your disks won't record properly" *. This is the lesson learnt.
    Just to be clear here - this issue is not about misunderstanding the potential vs actual capacity within the two encoding-modes, as iDVD indicates in the Project Info that this is sufficient...
    By the way... referring to '*' above and to wrap this bad boy up nicely I can confirm that the recommendation from SDMacuser is totally on the money - if you encode the image to disk and then use Disk-Utility/Toast to burn to the disk at a slower speed then everything's just fine and dandy... so maybe the manual should be modified to append "... unless you're encoding to a disk image which you then burn to media using Disky Utility"
    Thanks to all
    ev@0r8
    The name of the two compression modes can be confusing: 'Best
    Performance' gives you UP TO 60 minutes of content on a SL disc and
    UP TO 120 minutes of content on a DL disc. 'Best Quality' gives
    you UP TO 120 minutes of content on a SL disc and UP TO 240
    minutes of content on a DLdisc.

  • Want to degrade project quality & force content to fit on a dual layer disk

    I have a project that is around 19 GB in size, according to my DVDSP 3 meter. I want to degrade the quality of the video and force it to fit on a dual layer disk. Is this possible? Or, should I send the project to Toast and compress it there, forcing it to fit?
    Here's a description of the project:
    I have 240 small 100 MB clips to compile on a dual layer DVD. (It is a teaching DVD).
    Any help would be greatly appreciated.

    Jake sorry did not see your post till just now...
    Hi Drew, not sure why you are saying use 1-Pass CBR and to drop the bitrate really low?
    In the past for very static things, such as text or what I though the poster was describing, I found that a CBR works better than a VBR. I am 99.99% sure that Perry was the one who mentioned that way back when and I tried it and it worked nicely, so have been running with it ever since. (Periodically I go back to run some more tests, and so far it has pretty much held true at least for me.)
    I think of it this way (and I know you know this stuff:), more from how my head wrapped around it, and was thinking of the more general DVD SP description of VBRs as mentioned below) - in general, if there are no changes between the frames, VBR is not going to allocate different rates since each from uses the same rate, 2 Pass primarily is looking for areas of motion. So for what I thought what was described, CBR would seem the way to go.
    Though of course if some sections have more color, etc, maybe it is worth it, for instance one segment has three big color circles on the white board vs just one circle.
    The DVD SP guide mentions it is looking for motion areas, though the Compressor guide indicates it is broader than that, so I guess I was thinking more of the motion search as oppossed to detailed areas since it seemed fairly static with not much detail - linear graphics and marks, and then followed through on time of encoding vs possible quality increase.
    And the budget idea is the way to go.
    Time to rewrap my head

  • Burned dual layer disk w/idvd 603- audio out of sync w/video

    i burned a dual layer disks with idvd 6.0.3 and the video stalls about 20secs in, and then when it uh, "unstalls", the audio and video are totally out of sync. this goes on for the whole 90 min movie. if i play a scene from the scene selection menu, it works fine. also, it works fine when i play the movie from the project file from either imovie or idvd. its only the final burned product thats affected. i tried deleting the "encoded assets" and burning it again, which didnt work, same problem. finally, i tried both disks on a settop dvd player and apple dvd player application on a few different computers.
    dont know what to do. the idvd project file is working fine untill i burn a disk. the problem is only on the burned dvd. so i guess i need to trash my whole project (AGAIN!!! YAY!!!) and start over (AGAIN!!! YAY!!!). wow, ive never had so many problems with an application before in my life. i dont have much hair left to pull out.
    Intel Mini 1.66/iBook 16VRAM/iPod 30GB Video   Mac OS X (10.4.9)   Apple Certified Desktop & Powerbook, Data Recovery, Displays, iPod Repair

    Have you tried burning a disc image to the desktop yet from the file menu within iDVD6 and using apple's dvd player app to actually play said disc image?
    Click here
    if the image plays exactly as expected then we're looking at a media issue and not an iDVD issue. j/c ...what brand of media and type are you currently using? Verbatim & maxell are the recommended choices ....
    also try lowering the burn speed within apple's disc utilities or Toast to 4x or lower.

  • Dual Layer Disks in M30X-124

    Is t possible to burn Dual Layer disks in Satellite M30X-124 Model

    Hiyas,
    Answer to Your question is simple, "no",
    The drive in Your machine is a single layer burner, whether it can burn on a dual layer media it might end up being corrupted media afterward
    regards
    Gandalwhite

  • Burning to dual layer disks

    In DVD Studio Pro 4, my movie is too large to fit on a standard 4.7 GB DVD disk (I got a dialog box saying the media won't fit). Is there a preference item or setting somewhere, where I can set it to dual layer disk instead of a single layer disk. Toast has such a setting option. Does DVD Studio Pro 4?

    Welcome to the Boards
    As  Certified mentioned you will need to set the disc to Dual Layer
    Press the "F3" key and it will look like the image in the following link:
    [Lay of Land|http://dvdstepbystep.com/layofland.php]
    The disc will be in the upper left section (blue), and in the image in the link it is "Untitled Disc", click on it and in the inspector (in the lower section in bright purple) the second tab from the left will "Advanced" where you set the DL.
    One important thing to keep in mind is that you will need a layer break since you using a Dual Layer Disc - there has to be a break point where it crosses over from Layer 0 to Layer 1, if you have no Chapter Markers at all (or a limited number of Markers, none of which fall near the point which is a bit more than half the size of the assets) you will get an error that a Layer is the wrong size.
    What you do is
    1.) Set up markers in the areas where your would guesstimate the Layer Break(s) should be
    2.) Build the project (but not format)
    3.) Format a Disc (in the dialog that comes up, click on advanced tab, then where it says break point, use the pulldown which will have all valid breakpoint markers dark/black, while non-valid Layer Break Markers will be faded) If no marker is black there is no marker in the right place, regardless of you use automatic or not.

  • Can't Burn Dual Layer Disk

    I have a project in Encore CS6 that I have been trying to burn to a dual layer disk using an external LG Dual Layer Burner. It is connected to by computer via USB. My Computer Specs are as follows:
    ASUS X53Z Series
    Windows Edition: Windows 7 Home Premium - Service Pack 1
    Manufacturer: ASUSTeK Computer Inc.
    Processor: AMD A6-3420M APU with Radeon(tm) HD Graphics 1.50 GHz
    Installed memory (RAM): 6.00GB (5.48 GB usable)
    System type: 64-bit Operating System
    It is a laptop computer.
    I have already looked for a solution to this problem, and the only thing I found was that I should click "run as administrator," so I tried that, but it didn't help. When I am burning the disk, it freezes right after the transcoding process. It goes into the writing process and it freezes at 167.94 KB out of 555.35 MB (this is only a test disk, so it's still small at the moment). I know that I am following all the menu limits (etc.), because I was able to burn a single layer DVD, but when I put the movie onto the disk, I will need it to be a Dual Layer DVD. Do you have any suggestions?

    As a test... Create a DVD output ISO file and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)

  • Problems with dual layer disks.

    This is the first time I have needed to burn 8gigs on 1 disk so I went out and bought some dual layer disks(ouch!!!). The first copy burned fine and works but I made a small typo and had to fix it and reburn. After that the disks will not burn and dvdsp4 keeps locking up and I have now wasted 2 disks that I had to give my oldest daughter for. My 2.7 locks up so tight I have to do a hard shut down to reboot. any suggestions?

    When you re-build, are you doing so over the existing build. Meaning, are you building right at the very same folder location, without first clearing the contents of that folder?
    You might also try to locate the PAR files are remove them. You do this by closing DVDSP, and then looking through the file folders where your project files are. Locate the .PAR files and remove them. When DVDSP is restarted, it will re-parse the files as if they're new to the project. That combined with building to a clean folder with no existing files is as clean a build as you can get.

  • +R dual layer disks

    I have been having trouble burning and verifying on dual layer DVDs. I notice now that I'm using DVD+Rs (memorex) and in the Finder Help it is explicitly stated that the superdrive will handle DVD-R dual layers and makes no reference to +R's (whereas for single layer and erasable disks, +'s are explicitly approved as well as -'s).
    I'm prepared to accept that the verification problem is somehow because of the +R disks, but does anyone have any other experience using +R dual layers?

    this has nothing to do with OS being leopard rather than tiger. People have problems with burning to DL DVDs on both Tiger and leopard.
    First check if there is a firmware upgrade available for your DVD drive.
    sometimes that resolves the issue. Also, in my personal experience, a lot depends on the brand of DL DVD+Rs you are using. I've had a number of problems with some cheap bands. Someone here recommended Verbatim DVD+R DL disc as being quite reliable. try those.

  • Can my dv5 1017nr laptop burn DVD + R Dual Layer Disks?

    Im just wonder if my laptop can burn  Dual Layer format!

    It should be able to do it. Which burning software do you have? I know nero will do a hardware info that will tell you what the drive is capable of burning. Also you can go into device manager and get the identification of the drive and then googe it to see if you can find the specs for the drive. I googled your laptop model and some standard specs on the internet showed you have a DVD-RW DL drive that can also read Blu-Rays. Burning dual layers is a bit difficult. They always want to give out on the jump to the second layer. I make an .iso file of the source disk and burn from that. It seems to work best. 

  • IDVD Dual Layer Disks From Final Cut

    i have made my 1 hour and 37 minutes of footage from an HD camera saved as a .MOV file thats 97 minutes in total. i have tried to make a DVD in iDVD and it says too much content exceeds the disk limit on a standard DVD. is there a way of getting this footage to disk to watch on a DVD or do i have to buy the dual layer +dvd? and go down that route?
    i seriously cant see why i cant just burn a dvd from the computer on a standard dvd but it is the menu's that bulk out the file. as long as it gets to DVD i dont mind losing the menus as long as it plays on other dvd players and not just my super drive?

    You do not have to make your movie size smaller. As long as the content of your movie, the iDVD menus and submenus is under 120 minutes, and you choose 'High Quality' or 'Professional Quality' setting in iDVD's preferences, you can burn to a single layer DVD. iDVD automatically compresses the data to fit.
    Be sure to use a good brand of DVD disk, such as Verbatim, Maxell, Taio Yuden. Many people have had problems with store brands, TDK and Memorex.
    Burn at a slow speed of 4x or less.
    I have burned many movies to DVD; most were around 25-30 GB in size, but some were 60-100 GB. All were under 120 min, and all burned fine.

  • Making my first dual layer disk...have a question

    I went to build option and switched the size to 8.5 gigs. I will leave the side set to one. When I get to layer break its set to automatic. When i switch it to manual I do not get an option to specify where to put the layer break. My project has 13 timelines in it and i wanted to put it between the timeline switching. Any advice would be appreciated. Thank you.

    Be sure you "run as administrator" for dual layer projects.
    Did you start the buid? I think that is when you get the break dialog.
    Some may not apply, but see the posts by Jon Geddes and Neil Wilkes in this thread for background:
    http://forums.adobe.com/message/4003221#4003221

  • Trying to make single layer disk image AFTER making dual layer image

    Hi all
    I wonder if you can help me.
    I just made a dual-layer DVD image from a project and it created a 7GB file. Now I'd like to try a single-layer disk image at 4.7GB, something I did with an earlier version of this project, resulting in a watchable disk on a smaller TV.
    Having made the 7GB image, Encore won't let me make the 4.7GB version but I don't understand why.
    Martyn

    Thanks John.
    I don't know the answer to your AVI/MPEG2-DVD question. Sorry.
    I simply imported my PPro sequences, built my menus and created the disk image for a dual-layer disk. Whatever source format that involves, that was the one I've used. How can I find out?
    Is there an alternative way of building a disk that will allow me to choose all DVD/image/Blu-ray output options without starting again?

  • Burning Dual Layer DVD in Disk Utility vs. Burn Folder

    Using Disk Utility, I created an Image, (File > New Image from Folder), The resulting .dmg file was about 8.3 Gigabytes. Still in Disk Utility, I select the volume (Filename.dmg) and click Burn, insert a dual layer disk and get a "Disk does not have enough free space" message. I create another image of the same folder, but select "Compressed", giving a folder size of about 6.2 Gigabytes. I try to burn this but again get the "not enough free space" message.
    Now I try creating a Burn Folder, put the 6.2 gb Filename.dmg in the folder and select Burn, It burns fine.
    Why does the Burn Folder method work and not Disk Utility? What am I missing?
    I would appreciate any insight.
    Geoff

    Hi James:
    When you try to copy the dual-layer you may encounter problems because the layer-break may not be where you think it should be.
    When you try to copy the actual dual Layer DVD, iDVD will inform you that doing so may result in a disc that has playback problems in DVD players. It states that you are better off burning it with iDVD than from a Disk Utility.
    3rd party software that will help would be Roxio's Toast 6, 7 or Popcorn.
    Sue

Maybe you are looking for