Dual Layer DVD Burn - Error "Mac OS Error -5001"

I have a Powermac G5 dual 1.8 (Machine Model PowerMac7,2) - I upgraded the stock DVD burner to a Lacie Dual Layer burner model SH-S162L Internal. Burns single layer discs and CDs just fine... It will not burn dual layer discs, video_Ts, disc copy, nor data DVD DL's...
I've tried different media, new system install, updating drivers, even contacting Lacie who has sent me a new drive, which I installed today to the same end result of very expensive plastic coasters.
Lacie seems to be no help, and I can't find anything similar on these groups. I'm using Toast 7.0.2. Anyone have any suggestions? My sanity (and DVD budget) are running out! =)

Hi Christopher,
Please check to see if you have file sharing turned on. In the OS9 era, a -5001 error involved accessing or deaccessing a shared volume, I seem to recall. If file sharing is on, try just turning it off.
Good Luck,
John

Similar Messages

  • Dual Layer DVD Burner for Mac OS 9

    I always figured that the 1 hour burn limit imposed by iDVD was done intentionally to help sell DVD Studio Pro. Now having bought a copy of DVD Studio, I find that the limitation is actually imposed by the number of layers a burner is capable of writing.
    My research leads me to believe that Apple released a dual layer burner for the MacBook but no mention of its comaptibility for other models.
    So is there a dual layer burner available for other model Macs and equally important will it work with Mac OS 9.2.2?

    Funny, the link provided and researched before posting here does show
    the MCE drive* to fully support Apple software without Roxio and has a
    30 day guarantee if for any reason (including no evidence of failure)
    they will replace or refund your money. Less installation fees, if any.
    The primary issue, from your perspective, is the need to run OS 9.2.2
    and presumably boot native and burn with it. Otherwise, the product
    will perform as indicated in their write-up.
    {A call to Other World Computing is recommended, to see if they have
    or know of a hardware replacement for what you specifically need.}
    What they do say, in several places, indicating proper interface with
    the Mac OS X system and applications, is:
    *An MCE Exclusive (10.4+ required)
    iLife '05+
    Seamless integration with iLife, Mac OS X
    The MCE 16X Internal SuperDrive Upgrade with Double Layer support is seamlessly compatible
    with all of Apple's iApps including iTunes, iDVD, and iPhoto. In addition, it is compatible with Finder
    Burning and DVD Studio Pro, Apple's professional DVD Authoring software.
    These are often a choice for replacement hardware in out-of-warranty units.
    And they often supersede the earlier hardware they replace, or match many
    specs in new environments, depending on what product application's compared.
    The earlier link to search results and product info direct from quality vendor sources
    is a recommended path; call the actual company (note names of duration in resale)
    or contact a regional or local parts vendor or authorized Apple repair center.
    MCE's product, as listed, will do the job in OS X. It may work with Classic9 under X.
    Good luck & happy computing!
    edited.

  • Dual layer dvd burning

    Hi,
    I need some help regarding dual layer dvd burning.
    I never burned a dual layer dvd before and am going to in the next few days for a big movie screening. So I better get this right.
    How do I set the layer break? do I just set it to be automatic or should I set a chapter in the track? if yes, then where do I suppose to put the chapter.
    Is there any advise regarding dual layer burning ? so that I have less possibilities of messing things up.
    Its a 115 mins movie. Im planning to encode it with 6.5 avg 8 max.
    Is it safe to put a lot of chapters in?
    I won't have dvd menu. I will just set it to play straight away.
    thanks.
    Jack

    I'm not an expert in the least but I have worked with duel layers and let me tell you than can be a real s.o.b. I'm not sure what the scoop is on them but they tend to glitch out while your burning. I made three and 1 worked perfect the other two not at all and for some reason the 1 that did work only played on about half of the DVD players they were played on. When I got it into a DVD player that worked the chapter markers were not a problem. I had four seperate segments that were linked up and played fine. We used this for a screening in front of about 400 people.
    Our feature was about the same length as yours so after the screening we decided to just take the quality down a little (which you can't even tell) and put it on a normal DVD R. We saved a ton in duplication.
    Setting the Duel Layer is pretty easy, it's all in the inspector under the disc/volume tab but make sure that in your outline window the main DVD at the top is highlighted. I don't think it matters if you have a chapter in the middle of the footage or anything like that. You can just link up one long stream if needed. Be sure to try out the DVD on the actual player you are going to use. Good luck.

  • Dual layer DVD burner any time soon?

    I have an old PowerBook 1.33ghz. I'm itching to replace it with a MacBookPro. I upgraded this PowerBook with a dual layer DVD burner, and I use it a lot. I moved to the US from the UK and send many DVD's back to family and friends in the UK. I can't live without the dual layer DVD writer, plus backing up requires less DVD's and hence less space on my shelves.
    Anyone here know when Apple will release a model with a dual layer DVD writer? I refuse to buy an external.
    This old G4 has better DVD support than Apples flagship portable computer, doesn't seem right does it. I keep thinking I can live without dual layer, but its just such a step back.
    Anyone know of when this may change and MacBookPro will get a dual layer burner? I dont know how long I can wait to get my hands on the new MacBookPro . . .

    As soon as the industry can make one (so thin). I'll be buying one to replace it on my MBP. Might be Blu-ray

  • Recommendations on Dual Layer DVD Burner Purchase

    Anyone have any recommendations on a Dual Layer DVD burner to purchase to replace the old superdrive?

    Nope - both formats are for both platforms, but there was a spate of +R players and discs made available on PCs when Apple were only using -R. However, I have two or three PC burners that were -R only (and are now sitting on a shelf somewhere) from those days. The capacity of both is so close as to not be an issue, although +R does hold slightly more data. The gross capacity of a DVD-R is 4.7GB, which is in fact 4.372GB when used in a computer. For DVD+R the gross is 4.73GB which converts to 4.377GB on your computer. I guess for some folk that additional capacity might be necessary, but it isn't really worth worrying too much about, IMO.
    Using dual format drives is a good idea, as you can then use either type of disc... however if you read into the background of the formats you'll see that -R is slightly ahead of +R in the compatibility stakes, although more and more players are able to deal with both equally well.
    When it comes to burning a DVD in your superdrive, the slower you burn the better the compatibility is likely to be, however some folk report 100% success with fast burns every time (I've had my share of problems with faster burners). As long as you get an Apple compatible drive you should be OK, if faster burning is what you want to do.
    Layer break points - on a dual layer disc there comes a point when the laser in the player has to switch from the first to the second layer in order to access the data written there. The point at which this happens is controllable by the DVD author and is called the layer break point. However, on some media (specifically dual layer DVD-R) there is no point in setting this up as the first layer will get written until full, no matter what. There will then be an automatically set break point. When this occurs the change over is flagged as 'seamless' which is intended to make a smooth switch over but there are some players which cannot handle this kind of switch and it needs to be flagged as non-seamless. Other types of media (DVD+R DL) will allow you to set the break point where you want it and will allow you to set it as non-seamless. This helps increase the compatibility of your disc when playing back in set top players.
    In DVDSP this means it is probably better to use DVD+R DL media when creating a DL sized project.

  • Can a G4 eMac take a dual-layer DVD burner?

    I've been told it can't, but I'd like a second and third opinion.
    Anyone know?
    Thanks.
    Kurt

    Thanks, JMVP. But Neil's thread doesn't really answer my question. What I meant was; I intend to buy an external dual-layer DVD burner and leave the original PowerDrive in the eMac. I want the dual burner to be able to burn dual layer DVD-R disks. Somebody told me that a G4 eMac hasn't got the something-or-other to operate any kind of dual layer burner.
    What you're saying is, the right kind of dual layer burner will be compatible with an eMac, OR, the right kind of eMac drive will be compatible with a dual burner?
    Sorry to be dense, this is unchartered territory for me.

  • Dual-layer DVD burner in HP Pavilion 15-p245sa?

    Can anyone tell me if the Pavilion 15-p245sa has a dual-layer DVD burner? I'm trying to find out for a friend who has to make a purchasing decision this week, so any speedy replies would be much appreciated!
    Thanks
    This question was solved.
    View Solution.

    Hi,
    Yes it has.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Media write error for dual layer DVD burn

    I am having a problem burning a dmg to a dual layer DVD using the internal DVD writer. I have tried both Disk Utility and SimplyBurns.
    Both program s go through the preparation for the file, and when it attempts to burn the disk I get a 'media write error'. I am using Memorex DVD +R DL disks. I have successfully burned both CDs and regular DVDs with the drive.
    Does anyone have a suggestion on how I can fix this?
    Thanks

    I am using Memorex DVD +R DL disks.
    Try Verbatim DVD+R DL discs.

  • Dual Layer DVD write error #80020022 - failure to communicate with disk

    This only happens on Dual Layer DVDs, and always just as it's finishing. "Communcation with the disk drive failed error code: 80020022"
    Used Disk Util and direct burn via finder - both give same error. The image is a .cdr created via DiskUtil, original from a factory cut dual layer DVD, about 7.2GB. The target blank is a "Double Layer DVD+R" Memorex.
    The resultant disk is full, but unusable. Re-insertion sees it as a blank disk with no usable space. It wrote something, but certainly not the TOC?
    MacBook Pro 2.5, about 6 months old, lastest Leopard
    Please - any ideas? Do I have a hardware issue?

    Wow - thanks for the quick reply, pullman! I did all of the ideas you listed, no luck. The only way to make this fail is to write to a double sided DVD, I've gone through a stack already just testing/failing. This also fails when writing to a double sided DVD through the finder (then clicking on "burn")
    Here's a copy of the console error logs:
    http://baxnet.com/bs/picture6.png
    -- which indicate a hardware/polling error on the DVD drive itself.
    Note that it is complaining about /dev/disk1, which on my system maps to the DVD drive:
    Model: MATSHITADVD-R UJ-867
    Revision: HA13
    Serial Number: HG010865
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Low Power Polling: Yes
    Thanks again for your help - but still no luck. According to the logs, this may well be a device/hardware problem. Would you suggest a call to Apple support?

  • Burning Dual Layer DVD's on Mac Pro?

    Hello,
    I have recently purchased a Mac Pro and I'm wondering what is the best Media formate to burn Dual Layer DVD's? DL DVD +R or DL DVD -R?
    Adam Duguay
    Mac Pro
    2 X 2.8 GHz Quad-Core Intel Xeon
    DVD Burner: Pioneer DVD-RW DVR-112D

    Verbatim DVD+R DL 2.4X. They will burn at 8X with the Pioneer drive.

  • Using an external dual layer DVD burner with iDVD??

    I created a 3 hour iDVD file on a dual 2.0 G5 desktop with a dual layer DVD Superdrive. I have since migrated to a MacBook Pro. Now, when I open the iDVD file, it says there is no DL Superdrive on my system and that it will convert the file to single layer or something like that, with the option to cancel or proceed. If I purchase an external DL DVD burner will iDVD detect it and allow me to continue working with the file?? Or do I have to get a whole other Mac with a DL Superdrive (iMac or 17" MBP)?? The error specifically stated 'Superdrive', so I am not sure if just an external DL will work. Thanks for any help.

    Sorry to have to post this here, but your topic "How can I see the bitrate while playing a DVD?" in the DVD SP forum.
    http://discussions.apple.com/thread.jspa?threadID=325516
    has been archived and no one can reply to it.
    Thank you so much. Using VLC 0.8.5 to view bitrate was an excellent discovery for those who don't have the cash to buy the DigiGami poducts.
    Perhaps you should re-open a new topic for others to respond to.

  • Dual layer DVD works on Mac, not on DVD player

    I burned a dual layer video DVD (Verbatim DVD+R DL, what else?!) of a longish video. Works fine on the iMac, but my stand-alone DVD player can't use it.
    So, my question is: if a DVD Player can play commercial dual layer DVDs, why not home-made ones?
    Comments and suggestions welcome!

    Hi Klaus1
    My first (and only) thought is
    BURN SPEED - Set it down to x2 or x4 MAX
    Most common origin of DVDs that only plays on this or that or even not on Mac that burned them is speed of x16 etc.
    Yours Bengt W

  • Usb dual layer dvd burner

    i'm wanting to purchase a usb dual layer dvd-r burner for my macbook. does anybody know of one that will work with idvd, as i've read that there are compatibility issues with them.

    Use Patch Burn.
    http://www.patchburn.de/
    The new MBPs use a MATSHITA DVD-R UJ-857D as an optical drive. It's the same model number as in the MacBook, only with a "D" added for DL. If it's physically the same size, it may work without any modification.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    ITMS: MacOSG Podcast
     An Apple User Group 

  • Which Dual Layer DVD Burner can I use?

    I have DVD Studio 1.5.1 and no plans to move to a more recent version. I would like to make dual layer DVDs by purchasing a burner that supports dual layer burning.
    What dual layer burners will be recognized and supported by DVD Studio v1.5.1 and Mac OS 9.2.2? I'm using a Powerbook G4 slot loading 800MHZ 15" titanium computer. I am willing to use either an external or internal device.

    Check here: http://eshop.macsales.com/staticpages/Framework.cfm?page=superdrive/sdl_powerbook_g4ti.html
    -DH

  • Dual Layer DVD burn question, iDVD 6 or later.

    I have a movie that is over 7.7 gigs. My iDVD 6 only allows for 7.7g, dual layer? It says I've gone over the content length? If I have a 8.5g DVD, can't I put more than 7.7g on it?
    As it is it will only let me burn about 230 minutes or less, 7.7g I assume.
    Do I need a later version to fill my 8.5g dual layer DVD?
    thank you,
    paul

    Karsten
    launch Terminal, and type (or copy/paste form here):
    defaults write com.apple.iDVD SupportDualLayerProjects -bool true
    I'm impressed! .... J/C Where did you find this little trick?
    (I know, you can tell me but then you'd kill me ...... right?

Maybe you are looking for

  • Sys.utl_file has many errors. How to re-create

    hi all, I tried using the utility utl_file in my procedures and it showed out sys.utl_file has many errors and when i went through like $ sqlplus /nolog SQL*Plus: Release 9.2.0.8.0 - Production on Tue Mar 4 12:50:08 2008 Copyright (c) 1982, 2002, Ora

  • Formatting in a Grid

    I have a Grid with a TextBox and a ListPicker on the same row.  Something about the ListPicker is making the Textbox bigger than it should be.  Any ideas how I can fix this?

  • FAQ forum

    FAQ forum

  • Address Ctcs Keep getting wiped out

    I am installed Leopard and recently got a .mac subscription. All of my address book contacts keep disappearing. I have already reset all the syncing preferences, but it happens even if nothing is syncing. Address Book is populated for a while, then s

  • Two Instances of Oracle Application Server 10.1.3.x using the same DB

    I can't seem to find any documentation about installing two instances of Oracle Application Server 10.1.3.x using the same database. Would the two instances conflict? Should I create a separate database for each instance? I am attempting to cluster t