Dual Layer DVD HELP needed

I have a project that is a little over 3 hours long, that I need on one DVD. I own a Lacie Dual Layer external burner, but, I've never burned dual layers on it. Can it be done with iDVD 6 or in iMovie HD? I know where the button is for the Dual Layer feature in the Toast Lite software, what else do I need to do.(or buy?) What should I use DVD + or - R Dual Layer media? (is Verbatim best?)
Thanx,
idiotpuppy

Hello,
Your computer is fine for support of a double-layer superdrive. Just make sure to plug it into the ATA-66 port on the logic board if you plan to burn in speeds of 16-20x or more.
ATA-3 won't handle full burns at 20x.

Similar Messages

  • Dual Layer DVD Help

    Hi All, I was thinking of purchase a Dual Layer DVD burner from ebay (Apple USB 2.0 External 20x Double Layer DVD Burner; Mac/PC) and was wondering if there are any known issues. I've got a superdrive now but I would like the extra space when creating home movies from iMovie to iDVD. Will iDVD recognize the external DVD burner so I can choose single or dual layer to burn my project Please keep in mind, I'm using a Dual 1 ghz G4 (MMD) and running iDVD 7.0.3 Thanks Scott

    Hello,
    Your computer is fine for support of a double-layer superdrive. Just make sure to plug it into the ATA-66 port on the logic board if you plan to burn in speeds of 16-20x or more.
    ATA-3 won't handle full burns at 20x.

  • Problems burning dual layer DVDs - help...please

    I'm trying to burn a movie onto a dual layer (8.5gb) DVD but my 12" G4 Powerbook doesn't like it. It doesn't recognise the DVD and spits it back out after 30 seconds or so of strange noises, whirring etc. Burning onto regular 4.7gb DVDs seems to work OK, so am I doing something wrong? Can anyone help? FYI the media is DVD +R dual layer, made by Emtec (BASF).
    Powerbook G4 12   Mac OS X (10.4.5)  

    Well I certainly am no expert on media, but I went to Apple's store to look at the PowerBook's spec's. On the 12" it says "Slot-load 8x SuperDrive (DVD±RW/CD-RW)" and then on the 17" it says "lot-load 8x SuperDrive (DVD+R DL/DVD±RW/CD-RW)." So it appears to me that the 12" does not support dual-layer discs. I know that it doesn't have a dual-layer burner, but perhaps it will not even let you do a dual disc one side at a time. Not sure, just guessing.

  • Dual layer DVD, help with break point

    after reading alot of the previous posts on setting a dual layer break point, it seems the best way is to find the general area of where one thinks the break should be and then put in several markers in that area. My question is what type of markers to put in (ie. chapter, button highlights, dual layer break point)? Should i be able to put more than one Dual Layer break point? DVDSP is only allowing me to set ONE Layer Break Point out of the several points that i put in the area i think that the layer break should be, am i doing something wrong? Also, to avoid this whole trial and error process, can i simply do my "build" without any markers/break points and then burn the VIDEO_TS folder in Toast and let Toast find the break point? By the way, this disk will be replicated in case anyone forsees any problems with Eclipse, thanks for any help!

    If after building only one marker is black (not gray) it is the only legit marker and why it is limited. The layer break will be on the DLT where it is set
    I had one project that took quite awhile to find a place to put the marker to get a legal DL break point
    http://discussions.apple.com/thread.jspa?messageID=4032103&#4032103

  • Need Help regarding Dual Layer DVD Writer

    Hi All,
    I want to burn a Dual Layer DVD on my Macbook but I am not sure if it the DVD Writer which I have in macbook will support or not. Below are the details of the drive
    HL-DT-ST DVDRW GSA-S10N:
    Firmware Revision: BP10
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: Insert media and refresh to show available burn speeds
    Plz, if anyone can help me with this, I will really appreciate, Thanks in advance.

    Your computer will burn dual layer DVDs.
    (37544)

  • Help with burning large project on dual layer DVD

    Hi need help please.
    I am busy with a SD 16x9 project 215 minutes long so I am trying to use dual layer DVD's. The project has a serious menu setup (well I think so), it starts with a intro and go's into the main menu with sub menu's and so on. my problems is the following:
    if I burn a image all works well if I burn a disc from the image or using encore the menu once using a DVD player is very slow (the last half of the links on the time line) and some links get mixed up (if I press play dvd on the 3rd sub menu it somtimes starts in the correct place and somtimes it starts one link later).
    is this caused by the break in the layer and what can I do to correct it or to get it better.
    thanks
    Darren

    Are you using any motion menus? Have you exceeded the 1 gig limit for menus etc?
    I assumed 16:9 and forgot to look before I started posting: it does not look like it, but be sure you don't have more than 18 buttons per menu (if it is 16:9).
    With lots of short clips, break position should not be an issue. You can export to a folder and use imgburn which gives more control over layer breaks.
    Even though complex, it all looks straight forward, and, even though I can't see the image detail, it looks okay. The most likely issue in such a project is that Encore got lost as you made changes/corrections. Sometimes they can be fixed. Other times, the solution is a do over. Newer versions for Encore appear more robust (fewer problems and more likely to fix problems), but no versions appear to be free of such issues.

  • Helpful info on burning to dual layer DVD's

    I had posted a couple of questions two weeks ago re: burning an idvd project to a dual layer DVD. Was successful in the end. Further to this, Larry Jordon's December newsletter (www.larryjordon.biz) includes a very informative article on burning dual layer DVD's. I recommend it highly. Each of his monthly newsletters have a lot of helpful tips on fcp etc. (and no, my last name isn't Jordon!!)

    Just for future reference, the correct address is: http://www.larryjordan.biz/. There was one letter off in the original posting.

  • Incompatibility issues with Dual Layer DVD+R  help?

    I think I've made a serious mistake in believing I could author a Dual layer dvd for replication and sale on my own. I've spent over 14 months on this film, which is working perfectly in Encore, complete with extensive menus and transitional movies.
    I've done my best to transcode the media in the most compatible way (keeping bitrate below 7mbps and using dolby digital audio format) BUT I'm still having bad luck with MOST dvd players.
    The DVD plays properly on my cheap sony player, but both my toshiba and humax/tivo players failed to read the disc. (multiple tries/burns....or coasters, now) I've read that there are common problems with dual layer +R.
    MY QUESTION IS: what is the BEST POSSIBLE WAY to author/burn this project for mass replication? Can I really achieve the result I'm looking for with Encore or will I have to give up and go to a professional authoring house with DLT capability?
    Will I get the best result by burning from encore straight to disc OR burning an image or folder, then using a third party burning program?
    Thanks SO MUCH for any responses. This process has been soul-crushing.

    >The DVD plays properly on my cheap sony player, but both my toshiba and humax/tivo players failed to read the disc. (multiple tries/burns....or coasters, now) I've read that there are common problems with dual layer +R.
    Marc, the only mistake I think you are making is in assuming that set top players can handle a written DVD+R DL disc.
    Support in older players is at best sketchy.
    If the disc is working properly in at least one player, then you should be good to go.
    Replication will produce a different type of disc. One that
    i will
    play properly.
    Not all burners support book typing, and unless you know what you're doing here do not use these "fudges". It's best using Plextor, and even Benq burners. The freeware utility IMGBurn has this ability, and it also tells you what burners do this. I've never needed it personally, as my Pioneer burners & Denon players have no trouble with +R DL media.
    What you really need is a player that you
    i know
    plays DVD+R DL discs properly. Once you know your player is good with the format, then all other inconsistencies are player related, not authoring, and not your problem. There is simply no way at all you can guarantee any form of compliance with +R DL media, as there is nothing in the specs that says any set top player has to read these discs. Or -R DL where support is generally even worse.
    Whilst most players will read -R single layer & +R single layer, again there is no mandatory requirement to do so.
    You will need to get these
    i replicated
    and not duplicated. Duplication (burning) will result in a lot of returns, and a lot of wasted money.

  • Dual Layer DVD media help

    Does anybody know what DVD +R or -R Dual Layer media is compatible with Macintosh (specifically, Dual 2.5 Ghz G5 running the Final Cut HD Studio.
    I tried Fujifilm DVD+R DL and DVD Studio Pro 4 did not recognize the disc when I tried to build/burn the disc. The Apple Store does not sell any Dual Layer DVD media and Best Buy only had the aforementioned media available for sale.
    What do the Hollywood studio use for their dual layer media?
    Thanks!

    Hi David,
    I authored a dual layer DVD a few months back and had no problems with Memorex DVD+R DL media. They came in 15 disc packs.
    I'm in Miami, so I can't say what the Hollywood studios are using for one-offs, but the dual layer DVDs you rent
    from BlockBuster or NetFlix aren't recordable DVD media discs. They're DVD-9 discs from a replication facility.
    Cheers and happy authoring,
    Jeff

  • Project for dual layer DVD

    Hi there,
    I have a project which contains several individual sequences that have been compressed separately and which constitutes several parts of my future DVD.
    The total size is such that I need to burn a dual layer DVD.
    How do I determine where to include the marker indicating to switch layer ?
    I have done it before with a long project containing only one sequence, but this time the sequences are independent....
    Would DVDSP include automatically a "change layer" marker if I burn as is ?
    Thanks in advance
    Ivan

    I'd recommmend looking up "About Choosing a Dual-Layer Break Point" in the DVD Studio Pro user's manual or Help File.
    -DH

  • Dual layer DVD will not play after iDVD burning

    Hi All,
    I am having some trouble making a useable DVD. I have a video that I recorded and imported into iMovie (2h33m long). I exported it to iDVD, which told me that I needed to use a dual layer DVD to make it fit. Here's where I noticed the first problem: iDVD has one option for a dual layer disc, stating that it has 7.7GB storage space, and my discs have 8.5GB. I set it to use the standard setting for the DL disc any ways, turned the quality down a bit to make it fit, and burned the DVD. After burning two discs, I still do not have one that works. It comes up as "supported disc not available" on my Mac, and as a blank disc on any other machine I put it in. It will run on my coworker's brand new iMac, but that is the only one. Am I doing something wrong? The only mistake that I have corrected since I have tried all this is changing the aspect ratio back from 4:3 to 16:9 in iMovie (I am not sure how that happened, as the video was originally recorded in 16:9). I am re-exporting the file to my desktop now in the proper ratio, and changed the quality to HD. I am waiting for the file to encode as we speak. Any help would be greatly appreciated, as this work is for my local school board and is very time sensitive.
    I am running a 28" iMac, 2.66GHz Intel i5, 8GB RAM, 1TB hard drive on OSX 10.6.8.

    I set it to use the standard setting for the DL disc any ways, turned the quality down a bit to make it fit, and burned the DVD.
    That part I don't understand.
    iDVD encoding settings:
    http://support.apple.com/kb/HT1502?viewlocale=en_US
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
    Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t.  The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • Create recovery media Demands dual layer DVD's

    Good evening everyone.
    I just accepted the delivery of my 5 brand new notebooks for my company's new workers.
    3 of those notebooks are HP Probook 450 G2's (PN: J4R69EA)
    (These are the models with the 128GB SSD drives)
    The other two are Lenovo E540’s with similar specs.
    So first things first, create recovery media. So that is done before I hand them to the end users in question.
    While trying to create the windows disc, the "HP Recovery Disc Creator" program demands Dual layer DVD's: "Please insert a Dual-Layer DVD to proceed"
    The DVD's in question I’m using are "Sony DVD+R 120min/4.7GB" discs that in the past have always worked. (and at this moment are working for the Lenovo portables)
    Searching this forum pointed me to :
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03481733&lc=en&cc=us&dlc=en#N80
    Unfortunately this is not the same interface I have. I can only choose a drive to create a backup to
    (in this case it is Drive F:\ for internal drive)
    I also tried an external DVD writer with the same results.
    I have not tried a USB stick, but this is not what I want and since you can only create one set of backups…
    Link to a screenshot: (you need to copy paste it into your browser apparently)
    http://loxsvc.netau.net/HP/HP%20Discss.png
    This would not be that big of a problem if there was an actual windows 7 key printed on the portable.
    If I had a key, I would just reinstall the machine straight away with a clean windows 7 image so I dont have to clean out all the HP software.
    but unfortunatly this is not the case. so i need a Windows 7 Recovery disc to be created.
    Any suggestions besides buying DL DVD's?
    Thank you for your time
    - Signed Sven
    This question was solved.
    View Solution.

    Hey @SCamm ,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Dual-layer recording allows DVD-R and DVD+R discs to store significantly more data. DVD+R DL also called DVD+R9 are what is needed to create the Recovery media on this notebook.  Sorry to say.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Dual layer dvd burning

    Hi,
    I need some help regarding dual layer dvd burning.
    I never burned a dual layer dvd before and am going to in the next few days for a big movie screening. So I better get this right.
    How do I set the layer break? do I just set it to be automatic or should I set a chapter in the track? if yes, then where do I suppose to put the chapter.
    Is there any advise regarding dual layer burning ? so that I have less possibilities of messing things up.
    Its a 115 mins movie. Im planning to encode it with 6.5 avg 8 max.
    Is it safe to put a lot of chapters in?
    I won't have dvd menu. I will just set it to play straight away.
    thanks.
    Jack

    I'm not an expert in the least but I have worked with duel layers and let me tell you than can be a real s.o.b. I'm not sure what the scoop is on them but they tend to glitch out while your burning. I made three and 1 worked perfect the other two not at all and for some reason the 1 that did work only played on about half of the DVD players they were played on. When I got it into a DVD player that worked the chapter markers were not a problem. I had four seperate segments that were linked up and played fine. We used this for a screening in front of about 400 people.
    Our feature was about the same length as yours so after the screening we decided to just take the quality down a little (which you can't even tell) and put it on a normal DVD R. We saved a ton in duplication.
    Setting the Duel Layer is pretty easy, it's all in the inspector under the disc/volume tab but make sure that in your outline window the main DVD at the top is highlighted. I don't think it matters if you have a chapter in the middle of the footage or anything like that. You can just link up one long stream if needed. Be sure to try out the DVD on the actual player you are going to use. Good luck.

  • Dual-layer DVD problem

    I checked my settings and my MacBook Pro can burn dual-layer DVDs. I created a video in iMovie and burned it with iDVD on a Memorex dual-layer DVD. It appeared to burn with no problems. I attempted to play it in a relatively new DVD player. It spit out the disc and said "Disc Error." I attempted to play it on my Windows-based laptop. It recognized it as a DVD but couldn't play it.
    I then tried again with a Verbatim dual-layer DVD. Again, it appeared to burn with no problems, but refused to play. I even put it back in my Mac, and the menu came up, but it wouldn't play the video. I've checked and my firmware is updated for my Mac, which is a month old. I'm not sure what else to try.

    There may be a limited number of places to put a break point depending on the amount of material.
    Anyway you need to build the disc without formating. Then format the build - it is at that point in the Dialog you will see Black/Gray. The following movie shows where (note there is no break point shown in the movie, it jut s to point out where to look) Proper break points will be black the others which cannot be set as a breakk point will be grey
    http://dvdstepbystep.com/markers.mov
    This thread also can help
    http://discussions.apple.com/thread.jspa?messageID=6546274&#6546274

  • Recommendations on Dual Layer DVD Burner Purchase

    Anyone have any recommendations on a Dual Layer DVD burner to purchase to replace the old superdrive?

    Nope - both formats are for both platforms, but there was a spate of +R players and discs made available on PCs when Apple were only using -R. However, I have two or three PC burners that were -R only (and are now sitting on a shelf somewhere) from those days. The capacity of both is so close as to not be an issue, although +R does hold slightly more data. The gross capacity of a DVD-R is 4.7GB, which is in fact 4.372GB when used in a computer. For DVD+R the gross is 4.73GB which converts to 4.377GB on your computer. I guess for some folk that additional capacity might be necessary, but it isn't really worth worrying too much about, IMO.
    Using dual format drives is a good idea, as you can then use either type of disc... however if you read into the background of the formats you'll see that -R is slightly ahead of +R in the compatibility stakes, although more and more players are able to deal with both equally well.
    When it comes to burning a DVD in your superdrive, the slower you burn the better the compatibility is likely to be, however some folk report 100% success with fast burns every time (I've had my share of problems with faster burners). As long as you get an Apple compatible drive you should be OK, if faster burning is what you want to do.
    Layer break points - on a dual layer disc there comes a point when the laser in the player has to switch from the first to the second layer in order to access the data written there. The point at which this happens is controllable by the DVD author and is called the layer break point. However, on some media (specifically dual layer DVD-R) there is no point in setting this up as the first layer will get written until full, no matter what. There will then be an automatically set break point. When this occurs the change over is flagged as 'seamless' which is intended to make a smooth switch over but there are some players which cannot handle this kind of switch and it needs to be flagged as non-seamless. Other types of media (DVD+R DL) will allow you to set the break point where you want it and will allow you to set it as non-seamless. This helps increase the compatibility of your disc when playing back in set top players.
    In DVDSP this means it is probably better to use DVD+R DL media when creating a DL sized project.

Maybe you are looking for