Dual layer dvd wont play??

i burned a memorix DVD+RW DL on i dvd and everything went fine but when i put it in a dvd player to watch it on the tv it doesnt play...i tryed my xbox 360 dvd player and also another dvd player and it doesnt work...can anyone help so i can watch it on the big screen.

thank you.
i tryed both DVD+R DL and DVD+RW DL and they play on a computer but not on a dvd player..i asked a guy where i bought him and he said that dvd players dont play dual layer disc but i can tell he didnt know what the **** he was talking about.

Similar Messages

Dual Layer DVDs not playing in DVD players...

We have burned dual layer DVDs straight from DVD Studio Pro 4 and also from Toast 7.0 - they all play on our Macs but do not play in any of the DVD players that we have here on sight. Am I missing something or is it typical that the dual layer burned disc is not supported on a standard player? Thanks.

Currently I have Memorex DVD+R DL
I hate to say this, but there are a number of reports about inconsistency with Memorex DVD5 and DVD9 blank media.
Is there a chance that you could move to a different brand?
Toast, I believe, burns in a way that tricks players into seeing a DVD5 disc. Try to burn from it, rather than from DVD SP.
Also, try some better brands, ie Verbatim or even Sony.
best wishes

Dual layer DVD playback problems

Hi Everyone -
I am struggling to make a dual layer DVD that plays back properly. It is for a 76 minute film plus several bonus items.
Total disc space used is 6.4 gig
The film was compressed to a bitrate of 7.1 with a max of 8.3
Audio compressed to 492 kbps (or whatever the 400ish setting is)
Project compiled fine (although I did get a "video bitrate too high" error the first time, then lowered the bitrate.)
Set to
red laser
dual layer
OTP
layer switch set for chapter 12
I've done a few test dual layer discs in the past successfully. What I have done differently with this one is add a lot of bonus material, so there are some 20 or so small video files and a commentary track and two additional audio tracks.
I do not get any error messages while compiling or burning.
The second attempt played back on my mac, at least the main film did. It struggled playing a couple of bonus features and would play others at all.
It loaded on my Mintek portable player, but wouldn't play any video.
It did not load at all on my Cyber Home DVD player or my Panasonic Blu Ray player.
I am wondering if all of these additional small files (none over 2:30 minutes) have caused some clutter that causes the machines to struggle.
I am also wondering if this will be solved by replication, which I am going to do.
I will keep trying though.
If anyone has any advice, please let me know.
Thank you,
Joe Grisaffi
Houston TX

You may want to lower your bitrates and audio rates. They seem high, and I am not sure how much the extra material is that you have (in running time), it looks like about 40 to 50 minutes, so total time of about 2 hours or so? The rate may just be too high for the player to handle. Depending on the material (fast action vs seaking engagement for instance) you should be able to get this on a DVD 5.
Make sure you also use DVD+R DL discs, they are the most compatible. I burn a ton of them and do not have issues playing them back. Use them all the time for proofing and testing prior to going to replication.
As to it not starting properly, some players can get a little finicky. A good practice is to start the DVD with 3 -5 seconds of black, usually in VTS 1 (when you look at the video layout). Also, do you have each clip on seperate tracks or one long track.
As to DLTs, replicators are now accepting USB files also with a "Tape Image" layout on them

Playing dual layer dvd's with iBook superdrive

I've burned a couple of dual layer DVD's (8.5GB) with my iBook G4 and an external Lacie DVD burner.
I used Toast 7, experiencing no problems at all.
The DVD's play perfectly using the Lacie driver itself, or my Sony DVD player, or even a 10-year-old Pioneer DVD drive on my PC.
But... my iBook Superdrive refused to even read them.
The disk just makes a couple of turns and then the superdrive ejects it with no message.
The superdrive plays perfectly the commercial dvd's, which I know are usually double layered.
Does that mean that superdrive is not compatible with burned dual layer dvd's?
iBook G4; iPod 60GB v1.2.1; iTunes 6; Airport Xpress Mac OS X (10.4.4)
iBook G4; iPod 60GB v1.2.1; iTunes 6; Airport Xpress Mac OS X (10.4.4)

I don't believe the SuperDrive for the iBook is set
up to read/write the dual layer DVD's.
I didn't expect it to write DL DVD's, that's why I used an external burner.
The problem is when reading the burned dvds
Go to your Apple Menu and select "about this mac".
Click on the "more info" button and navigate to the
Disc Burning label. Select it.
If your SD is dual layer compatible you'll see "+R
DL".
It says generically that SD reads DVDs
What speed were you burning the Dual DVD's on the
LaCie?
don't know, really, but Toast is set to burn disks at the best speed:
one was a DL DVD+R 8x, the other a DL DVD-R 4x
it's IMPOSSIBLE that SD can't read dual layer DVDs: commercial DVDs are 6-7GB, they MUST be DL and they play perfectly.
and if it really can't play burned DL DVDs, that's really a shame! >:-Z

Can HP 15-d103tx play dual layer dvd or Blueray discs

I would like to know if my HP 15 d103tx notebook can play dual layer dvd's and blueray discs.

Hi:
Below is the link to the product specs page.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04206739&tmp_task=prodinfoCategory&cc=us&dlc=en...
All it states is it comes with a SuperMulti DVD burner.
It will play dual layer disks if you see a small DL on the DVD bezel.
It will definitely not play blu-ray disks.

Dual layer DVD will not play after iDVD burning

Hi All,
I am having some trouble making a useable DVD. I have a video that I recorded and imported into iMovie (2h33m long). I exported it to iDVD, which told me that I needed to use a dual layer DVD to make it fit. Here's where I noticed the first problem: iDVD has one option for a dual layer disc, stating that it has 7.7GB storage space, and my discs have 8.5GB. I set it to use the standard setting for the DL disc any ways, turned the quality down a bit to make it fit, and burned the DVD. After burning two discs, I still do not have one that works. It comes up as "supported disc not available" on my Mac, and as a blank disc on any other machine I put it in. It will run on my coworker's brand new iMac, but that is the only one. Am I doing something wrong? The only mistake that I have corrected since I have tried all this is changing the aspect ratio back from 4:3 to 16:9 in iMovie (I am not sure how that happened, as the video was originally recorded in 16:9). I am re-exporting the file to my desktop now in the proper ratio, and changed the quality to HD. I am waiting for the file to encode as we speak. Any help would be greatly appreciated, as this work is for my local school board and is very time sensitive.
I am running a 28" iMac, 2.66GHz Intel i5, 8GB RAM, 1TB hard drive on OSX 10.6.8.

I set it to use the standard setting for the DL disc any ways, turned the quality down a bit to make it fit, and burned the DVD.
That part I don't understand.
iDVD encoding settings:
http://support.apple.com/kb/HT1502?viewlocale=en_US
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t. The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

Can Adobe Premiere Elements 12 burn a dual layer dvd disk? If not, which of the components is at fault?

When I spoke to a person about upgrading from Premiere Elements 10 to 12, I specifically asked if the program could burn DUAL LAYER 8.5 dvds and I was told that it could. That is the ONLY reason that I upgraded. Since recording in full HD the files are larger. I video plays for local theaters. I have been trying to burn a disk that is 7.5GB (2 hours 15 minutes). I bought RIDATA -RDL 4x 8.5GB disks. Then had a dual layer burner installed in my computer. Premiere Element dialog "incompatible disk" The RITDATA says the problem is Adobe, the Geek Squad says the problem is Adobe.
SO ANSWER THIS QUESTION: Can Adobe Premiere Elements 12 burn a dual layer dvd disk? If not, which of the components is at fault? I am trying to burn 18 copies of this video (no copyright infringements) and don't tell me to to divide it into 3 disks.

drowning
Can Adobe Premiere Elements 12 burn a dual layer dvd disk?
Short answer: Yes.
What are you burning to DVD disc - DVD-VIDEO on DVD disc or AVCHD format on DVD?
Does your DVD CD burner support double layer single sided discs?
Premiere Elements is supposed to (been there and done that....)
1. burn to Folder (8.5) for Publish+Share/Disc/DVD and Publish+Share/Disc/AVCHD
(you take the VIDEO_TS for the former and BDMV Folder in the latter to a program like ImgBurn
for the actual burn to the DVD double layer single sided disc)
2. burn to disc 8.5 GB/240 minutes
Have you gone the burn to folder Folder (8.5 GB) route?
Have you tried another brand of disc in spite of by the disc manufacturer and the Geek Squad are telling you?
A double layer single sided disc is labelled 8.5 GB/240 minutes. In reality, that 8.5 GB is 7.95 GB. Where are you
coming up with 7.5 GB for your disc? Was that due to typing glitch?
Please review and consider. Any questions, please do not hesitate to ask.
ATR
Add On..Have you updated 12 to the 12.1 Update yet? If not, please do so using the opened project's Help Menu/Update.
This is not Adobe. Rather user to user.

Help with burning large project on dual layer DVD

Hi need help please.
I am busy with a SD 16x9 project 215 minutes long so I am trying to use dual layer DVD's. The project has a serious menu setup (well I think so), it starts with a intro and go's into the main menu with sub menu's and so on. my problems is the following:
if I burn a image all works well if I burn a disc from the image or using encore the menu once using a DVD player is very slow (the last half of the links on the time line) and some links get mixed up (if I press play dvd on the 3rd sub menu it somtimes starts in the correct place and somtimes it starts one link later).
is this caused by the break in the layer and what can I do to correct it or to get it better.
thanks
Darren

Are you using any motion menus? Have you exceeded the 1 gig limit for menus etc?
I assumed 16:9 and forgot to look before I started posting: it does not look like it, but be sure you don't have more than 18 buttons per menu (if it is 16:9).
With lots of short clips, break position should not be an issue. You can export to a folder and use imgburn which gives more control over layer breaks.
Even though complex, it all looks straight forward, and, even though I can't see the image detail, it looks okay. The most likely issue in such a project is that Encore got lost as you made changes/corrections. Sometimes they can be fixed. Other times, the solution is a do over. Newer versions for Encore appear more robust (fewer problems and more likely to fix problems), but no versions appear to be free of such issues.

Using Dual Layer DVD with iDVD

I have a 2 hour movie that I have imported into iDVD. I put in a dual layer DVD-R, but iDVD insists that my two hour movie can fit on a single layer DVD-R. Yes, I'm sure it can crunch the heck out of it, but I want the quality to be high--THAT is why I BOUGHT a dual layer support drive!
Is there any way I can tell iDVD to not crunch it down to 4.5 Gigs, but to just 9 Gigs?

Hey, you used the word "experiment" twice in the same forum which gets you twenty points but you lose 10 points since it was for the same experiment.
I get twenty (40-20) just for writing this response. Points are redeemable at the nearest refrigerator for hoppy beverages providing that you speak nicely to the member of the household that stocks said items, (or you can play back audio of yourself speaking compliments, but it must be recorded in 16 bit audio, as 12 bit audio will only buy you grief).

IDVD 08, dual layer DVD doesn't burn last 2 minutes of audio

Hello,
iDVD 08, dual layer DVD doesn't burn last 2 minutes of audio, I get perfect audio/video through the whole DVD except the last 2 minutes or so...
I'm burning a 3 hour DVD on iDVD 08. I'm burning it only a DL+R Dual Layer disc. I've burned with "high quality" compression, "professional quality" compression. I've even burned the last 2 minutes of the timeline just to make sure it wasn't the quicktime file and the video and audio played fine.
The size of the project in the setting reads the project as 6.5 GB out of the 7.7 available on the disc.
So why does it always cut off the audio the last 2 minutes of the DVD? Any suggestions?
~Rhianne
[email protected]

Try making a disc image to the desktop (from the file menu in iDvd) and see if it plays fine with apple's dvd player app.

Dual Layer DVD Burners? (Best Choices)

What are people having the Best luck with Dual Layer DVD wise?
I have an older G4 (as seen on bottom of post)
I've been reading that the DVD+ format is the way to go as far as Dual Layer DVD is concerned..
Does that mean I wouldn't be able to play it back on my single layer SuperDrive?
Thanks,
Eric

Can't anyone give me a couple of good choices for Dual Layer DVD Burners for the G4?
I know that LaCie makes one, are they're any better choices?
Thanks Again,
Eric
Which model of LaCie, or others are recommended?
(or not recommended?)

Dual layer DVD-ROM in a SuperDrive

I have a dual layer DVD-ROM created on a Pioneer USB dual layer burner. The disc plays fine in the Pioneer, but does not mount in the SuperDrive of my PowerBook or G5 tower. Should the standard SuperDrive be able to read the disc? It can read a dual layer movie disc without problem.
All the best,
Tom

I might be in the wrong forum, but what the heck. I have a similar problem. I have a two week old 17" PowerBook G4 with the new Superdrive that writes in DVD-DL. Anyway, I backed up a ton on data from a variety of computers I had around here (20 Dual-layer DVDs) by copying and pasting data to the DVD-DLs using the finder in Tiger. They work fine on the PowerBook but will not play on a 1st generation 20" iMac G5 (1.8 GHz, 1GB SDRAM, running 10.3.9) with a Superdrive. It just spits them out. I thought that older Superdrives could play (but not write to) DL DVDs. Any suggestions on how I can get them to play on older Macs with Superdrives (i.e. 867MHz PowerMac G4 Quicksilver, Flat Panel iMac G4s, and 1st generation iMac G5s)?
Thanks

Dual layer dvd burning

Hi,
I need some help regarding dual layer dvd burning.
I never burned a dual layer dvd before and am going to in the next few days for a big movie screening. So I better get this right.
How do I set the layer break? do I just set it to be automatic or should I set a chapter in the track? if yes, then where do I suppose to put the chapter.
Is there any advise regarding dual layer burning ? so that I have less possibilities of messing things up.
Its a 115 mins movie. Im planning to encode it with 6.5 avg 8 max.
Is it safe to put a lot of chapters in?
I won't have dvd menu. I will just set it to play straight away.
thanks.
Jack

I'm not an expert in the least but I have worked with duel layers and let me tell you than can be a real s.o.b. I'm not sure what the scoop is on them but they tend to glitch out while your burning. I made three and 1 worked perfect the other two not at all and for some reason the 1 that did work only played on about half of the DVD players they were played on. When I got it into a DVD player that worked the chapter markers were not a problem. I had four seperate segments that were linked up and played fine. We used this for a screening in front of about 400 people.
Our feature was about the same length as yours so after the screening we decided to just take the quality down a little (which you can't even tell) and put it on a normal DVD R. We saved a ton in duplication.
Setting the Duel Layer is pretty easy, it's all in the inspector under the disc/volume tab but make sure that in your outline window the main DVD at the top is highlighted. I don't think it matters if you have a chapter in the middle of the footage or anything like that. You can just link up one long stream if needed. Be sure to try out the DVD on the actual player you are going to use. Good luck.

Dual Layer DVD's compability with Settop DVD players

Is there any problems with playing Dual Layer DVD's on a normal consumer DVD Video player?
Is the DVD Video Player able to read the DVD-r DL or DVD+r DL disks at all?

Hi Chris,
All my previews go out through a bit setting DVD 5 downsized system. It's probably 3 years old now. I must admit until yesterday I had completely forgotten about this. As it's just part of the workflow. From having looked around last night my understanding is currently that some +R recorders now come preset to bit encode for DVD-ROM straight out of the box.
I will also have to look into what Toast is currently outputting. You know the old adage if it ain't broke.....
I have been very slack with respect to my DVD 9's. I simply use toast as I have normally post authored my build folders. But, those good results may be in part due to the fact that pretty much all my product goes to producers and DVD facilities. So it's either going to end up on a relatively young machines or PC's. None of it would end up in a home i would think.
Good Luck.

Dual-layer DVD problem

I checked my settings and my MacBook Pro can burn dual-layer DVDs. I created a video in iMovie and burned it with iDVD on a Memorex dual-layer DVD. It appeared to burn with no problems. I attempted to play it in a relatively new DVD player. It spit out the disc and said "Disc Error." I attempted to play it on my Windows-based laptop. It recognized it as a DVD but couldn't play it.
I then tried again with a Verbatim dual-layer DVD. Again, it appeared to burn with no problems, but refused to play. I even put it back in my Mac, and the menu came up, but it wouldn't play the video. I've checked and my firmware is updated for my Mac, which is a month old. I'm not sure what else to try.

There may be a limited number of places to put a break point depending on the amount of material.
Anyway you need to build the disc without formating. Then format the build - it is at that point in the Dialog you will see Black/Gray. The following movie shows where (note there is no break point shown in the movie, it jut s to point out where to look) Proper break points will be black the others which cannot be set as a breakk point will be grey
http://dvdstepbystep.com/markers.mov
This thread also can help
http://discussions.apple.com/thread.jspa?messageID=6546274&#6546274

Dual layer dvd wont play??

Similar Messages

Maybe you are looking for