Dual Menu Functionality Possible?

Does anyone happen to know if there is an extension (or even a way in Spry) to have a menu using side navigation that has two forms fo navigation? What I mean by that is, is there a way to have a menu have both a pop-up (like the kind msnbc.com uses) and drop-down functionality. The idea is to  have the page the person is on have the drop down options for that particular page/sub-section, and the pop-ups would have links to other subsections.
As always, any help on this is greatly appreciated.
Thanks,
Ken

Sure.
Simply put, rollover/hover pops up the box on the right of the menu with more links; click takes you to the index page for that department.
I'm sure that msnbc has programmed their pages to a fare-thee-well, but you don't need to go to PHP, etc., to achieve a similar effect.
In fact, that is basically the way Spry Menus already work...rollover the top level menu item, and the submenus drop down (or fly out). You can still apply links to the top level menus, and link directly to the departments.
Do some experimenting with Spry Vertical Menus...you'll need to do some restyling of the submenus to look like the MSNBC popups, but it should be achievable.
Alternatively, simply put a list of links on your left sidebar, and customize Spry tooltips to pop up for each list item on hover. Click the links on the sidebar to navigate, or click links on your tooltip.
Beth

Similar Messages

  • Enable Dual control function for FBZ2

    Hi,
    Its related to Dual control functionality for vendor master data.  I got a issue, if I change the sensitive fields for a vendor master and run F110, then it shows exception that vendor master not yet confirmed.
    IS it possible to post outgoing payment through transaction FBZ2, in this case?
    I have seen some transactions where the clearing document was posted by transfering the payable amount to intercompany or offsetting account and making payment later, without getting any exception, eventhough vendor master change not yet confirmed.

    hello, anisha.
    like you, i have also wondered what the payment block in the customer master is for.  after reading the documentation and asking an FI consultant, i gather that this block is apparently used to prevent automatic payment transactions for a customer.
    again, why anyone would want to automatically post payments for a customer is an issue i wish to explore.  perhaps this applies to scenarios where very many customers pay the exact invoice amount or have the payments guaranteed?  or perhaps to prevent automatic offsetting of a customer/vendor account?
    regards.
    Edited by: jonathan y on May 6, 2009 10:23 AM

  • Wish for the dual toned function

    Hi,
    I'm from Germany, so I hope you'll understand me:
    One thing I miss at the dual tone function in Lightroom 3 Beta 2 is the possibility to set the satiation down. I love this function and work a lot with it. It would be great to have a slide control for the satiation which sets the intensity of the dual tone down so that I don't have to reduce both satiations of every colour. It's always hard to find the exact balance again.
    I am using Lightroom 3 Beta 2 on Windows 7 Ultimate 64 bit and a Core i7 920 CPU with 6 GB RAM.

    bberenbaum wrote:
    I promise that was only because I have too much time on my hands...
    i have that too

  • Role Menu/Function using BAPI

    In an effort to integrate a customers two products, I am trying to list out all of the roles and menus assigned to a role using JAVA/JCO and BAPI.
    Is this relationship well defined enough to use RFC_GET_TABLE_ENTRIES?  I can get a list of the role names from AGR_DEFINE (or V_AGR_SINGL, V_AGR_COLL) , but the menu/function table is not as obvious.   I noticed the ARG_HIERT table, which look like it has the textual names of the menus. I was thinking I'd get back an ID of a object instead of the textual representation. Or is this not recommended? 
    Additionally, is there any iterative approach that can be used when listing objects (like roles) where the number of objects is in the 10's of thousands?  The only way I can see now is to fetch all of the names from a view that has only the names, then for each one make a separate call to get the details.
    I see there are some nice APis in the com.sap.security.api package, but those will require I have an application living on the J2EE side of SAP and I would like to prevent that if at all possible.
    Thanks,
    Donny

    Thanks for your help.
    PRGN_ACTIVITY_GROUPS_LOAD_RFC has some good data in it I can use, however the one piece of information that I am after is the TCODES assigned to a role.
    The information that is contained in the AGR_TCODES table. 
    Is there a remote function/program I can call that given the name of the role will return all of the tcodes assigned to the role?
    PRGN_READ_TRANSACTIONS_ONE_AGR
    and
    PRGN_1221_READ_TRANSACTIONS
    Are exactly they type of thing am after, but they cannot be used for 'remote' calls.
    Thanks again,
    Donny Smith

  • Hello, i have a question. I've got one .mov  video and one .mp4, both 3 minutes long. Now I want to burn them on one single dvd, and a menu (if possible) so i can choose between them. Is this possible?

    Hello, I have a question.
    I've got one .mov  video and one .mp4, both 3 minutes long. Now I want to burn both of them on one single dvd, with a menu (if possible) so i can choose between them.
    How can I do this?

    You could use iMovie if you own it. Look here for an example...

  • Menu Functions at user/reponsibility level - URGENT

    I need to query Menu functions for the particular user/ Reponsibility. User and Reponsibility are the two input parameter for the reports. I'm selecting the values for the menu from the Fnd_Menu_entries for a particular responsibility.
    I need to filter for user also. Kindly let me know how to and which table to join to get the menu functions for particular user.

    Hi,
    Assign ECC connector to SAP_ECCS_LG group.
    Run the programs GRAC_PFCG_AUTHORIZATION_SYNCand GRAC_REPOSITORY_OBJECT_SYNC) in full synch mode(this might take time so better do this in background). Better do it sequentially.Check the logs of the jobs in SLG1 just to ensure everythings fine.
    Run ARA for a specific user and mention the connector for faster output. Ensure this user has the role with risks.Also as explained earlier check the GUID against user id in table GRACUSERROLE and using GRACROLE you can find out the technical name of the role updated in the table. This should be same as the backend role.
    Then run ARA and while doing so please ensure the selection screen doesnt have any unwanted default inputs. If followed correctly , this should be of help.  I am assuming the role analysis yielded correct risks as configured since this would mean that connector have correct actions and basic config is in place.
    Regards,
    Vivek

  • How do I execute a menu function programatically?

    I'd like to execute the menu function "Operate>reinitialize all to default" at end of a simple loop but cant find a method of doing so. Can someone point me in the right direction?
    Labview Express 7.0

    hope this help.
    regards
    Neona
    Attachments:
    Default.vi ‏6 KB

  • List of Responsibilities - Menu - Functions.

    Hi,
    In Oracle E-Business Suite, how I can get a list of responsibilities - Menu - Functions? Is release 11i.
    Thanks!

    In Oracle E-Business Suite, how I can get a list of responsibilitiesSystem Administrator responsibility > Security > Responsibility > Define, then query all responsibilities.
    Or, submit "Active Responsibilities" concurrent program.
    Or, run any of the queries in this link https://forums.oracle.com/forums/search.jspa?threadID=&q=Query+AND+Responsibilities&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Menu System Administrator responsibility > Application > Menu, then query all menus.
    Or, run any of the queries in this link https://forums.oracle.com/forums/search.jspa?threadID=&q=Query+AND+Menus&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Functions? System Administrator responsibility > Application > Function, then query all functions.
    Or, run any of the queries in this link https://forums.oracle.com/forums/search.jspa?threadID=&q=Query+AND+Functions&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Is release 11i.The above is applicable to 11i and R12
    Thanks,
    Hussein

  • How to create menu function for link to open file

    Hi,
    I need help how to create menu function for link to access file and allow user to save the file when click on it.
    The file will keep inside server.
    Thank you.
    Regards,
    Wilson

    I need help how to create menu function for link to access file and allow user to save the file when click on it.
    The file will keep inside server.AFAIK, you have to write a custom code to achieve this and Oracle does not provide this functionality.
    If you want to store the file as an attachment, please see (How to Store Image/PDF Attachments on the File System in 11i and R12 (like Attachment File Directory) [ID 294525.1]).
    Thanks,
    Hussein

  • DVD Menu Functions in iTunes and on iPad?

    I'm trying to create the functionality of a DVD menu but in a format supported in iTunes, and further, on the iPad.
    I've got a project that I'd like to format that requires me to have a menu of tracks (different content) and I'd like to be able to use my iPad to access and view it. For  example: the opening menu would have different titles that if selected would take you to the connected assets (Content). Once the content is done playing it takes you back to the main menu. This would be much the same way DVDs include extra scenes and what not...
    Anyone now what software I could use to create functionality. I've built all the menus in Apple Motion, and A. Photoshop. The DVD export/formatting makes everything look like crap as a result of the rendering and codec and just overall poop that happens between content creation, rendering, and final output.
    I'm wondering if I can have the clean lines I see in Apple Motion and QuickTime, but with the menu functions with connected assets, but do it all through iTunes, iPad, or ATV.
    Any thoughts? Pardon the double post if this has been asked before. I've looked and can't find anything.

    Try this...
    http://www.apple.com/itunes/lp-and-extras/
    Might not be the answer you want, but it is probably the one you need.
    Good luck!!
    CaptM

  • Search menu function is not working

    Hi
    Search menu function is not working in one of my HRMS 9.1 (PT: 8.52.09 application.
    Verity installed and executed the build registry search index aswell.
    Please let me know if I miss something on configuring the search menu function.
    Thanks
    Soundappan

    Personally I did not have to make any psappsrv.cfg changes for this particular 9.1 env or any other changes that I can remember. Is PS_HOME = PS_CFG_HOME though?
    If you didn't specifically set PS_CFG_HOME to PS_HOME it defaults to something like $HOME/psft and the files would need to be there instead.
    If you run psadmin what's it show as the Config Home?
    If I unset PS_CFG_HOME i get
    PSADMIN -- Tools Release: 8.52.07
    Copyright (c) 1996, 2011, Oracle. All rights reserved.
    PeopleSoft Server Administration
      Config Home:  /home/psoft/psft/pt/8.52And the files would need to be there rather than $PS_HOME/data/....
    Now you could override that in your psappsrv.cfg file with
    EMPLOYEE=PS_HOME/data/search PS_HOME I dont think can be used here as a variable... it needs to be the full path. the location here must lead directly to the EMPLOYEE directory
    In 8.52 there are also some alternatives to this older style above.
    See this peoplebook for 8.52 http://docs.oracle.com/cd/E28394_01/pt852pbh1/eng/psbooks/tsvt/book.htm?File=tsvt/htm/tsvt10.htm%23g037ee99c9453fb39_ef90c_10c791ddc07_102b for details.
    In the past I've used shares or nfs mounts to have the process scheduler write directly to the appserver. But you could check out the new search server option too.
    Let me know.

  • Is mirroring function possible between an Ipad and an Iphone?

    Hello,
    Is mirroring function possible between an Ipad and an Iphone?
    Wireless or not.
    Thanks

    The games are the app - there is no app that controls other apps (i.e. games) and allows mirroring. Even the games are not "mirroring" in the way of one device sending it's control out to another - you're both playing it together.
    To sum up, if the game is designed for "sharing" then you can see each other's movements on both screens - but no app can do it for other games.

  • Disabling standard menu function

    Hi,
    We have a requirement where there is a need to disable the standard menu function in CO02 based on the user.After entering the order number,it takes to next screen. In that screen,i have to disable the menu option which is in Functions --> Restrict Processing --> Technically Completed. Can any one tell me how to acheive this.
    Regards,
    Krishnam Raju

    Hi,
    I am able to disable the menu function by creating the enhancement implementation for the spot 'es_saplcozf' in the function module 'CO_ZF_BUILT_FCODE_EXCL_TAB' .But i am not sure whether this is the right approach or not. Can any one give me the suggestions ?
    Regards,
    Krishnam Raju
    Edited by: krishnam raju on Dec 30, 2008 12:01 PM

  • No menu function?

    Hiya i have an apple 160GB & bought a dock a while back for my old 80GB, i use a jack out on the back off the dock going into my stereo, but on the remote i dont have the menu function?
    I can play skip pause & volume but no menu function?
    Does the dock have to be plugged into a computer via the main output/usb cable for the menu function to work?
    Thanks in advance for any help
    Message was edited by: chronic2

    The menu function on the remote supplied with the dock doesn't work with the iPod. It's for use with Frontrow on a Mac. Apple have simply used the same remote supplied with a Mac for the iPod.
    As such, a lot of folks are disappointed when they find the menu doesn't work.

  • Menu function exists in MyFaces, not in JSF?

    When I search the forum, some people ask for the component of menu, the direction goes to MyFaces.
    Is it true that only MyFaces supply with menu function, JSF doesn't?
    I am in the dilenma of using myfaces and jsf!

    Hi,
    Did you attach the responsibility itself to the Role through ADD Node in the role update screen. If you look at how USER Management responsibility defined , that can give you an idea. The Security Administrator Role has the User Management Responsibility added as a node. So if you want any iser to access the USER Management responsibility indirectly through the role , that role needs to be provided. If the User Management Role directly provided to the user without the role , you get the same error message what you are getting it.
    If I am correct ( based on the seeded role Oracle designed ) , the role can not stand alone without being attached a responsibility to it . You can add further grants directly to the role. Correct me if my concept is wrong.
    Thanks & Regards,
    Abhaya

Maybe you are looking for