Dual Monitor Advice

I have two monitors, one a Lacie 20" 1600*1200 which is designed for photo-editing and the other a 1600*1050 Samsung. Both are color calibrated. I'm new to Lightroom, currently trying V3 which i like a lot.
What I'd like is, does anyone have wide experience of dual monitors with light room and have a favourite setup for the LR3 panels? I'm thing that I'd view and edit images full  screen on the Lacie. Any thoughts or ideas?

There's not a lot of customisation available in LR, sadly so LR is not able to take best advantage of the extra screen.
I often have grid on second screen and main image on Develop screen as you cannot do it the opposite way around like you can in Library mode, which would be my preference as it uses the space better. But I do also use a second larger image on panel free second screen as well at times too when developing.  So you can have both panels out in develop and fill screen with image on second monitor - it also updates to reflect crop you are trying out on main screen when using crop tool, which is handy.

Similar Messages

  • Msi R7770 power edition 1GD5/OC dual monitor advice

    Hi guys
    I'm hoping someone can assist me. I have the msi r7770 graphic card installed on my pc. I would like to set up my first dual monitor display, but I am unsure what cables I need to connect two screens with and which two of the three ports on the graphics card to use.
    Can anybody offer me some advice.
    Peter

    ok the card has 3 ports! any 2 of the 3 in combination should be perfectly capable of outputting a dual monitor setup!
    DVI-I - thats the blue one and has digital and analogue pins
    HDMI - Standard HDMI connector
    Display Port - High Bandwidth Display signal output
    usually with a card like that the best way to hook up 2 screens is 1 to the DVI-I and one to the HDMI port but if one of your monitors has a display port in on it use a display port cable as that port has much higher signal output bandwidth!
    its hard to say what the best way is unless we know what monitors your planning to use?

  • Advice about dual monitor, "newbie" friendly WMs

    Need some advice:
    Just got another monitor for my laptop (a samsung 23.5'' 2333sw), and I'm trying to tweak my monitor setup. What are the best panels/windowmanagers for dual monitors? Like right now I'm using compiz + tint2 and when I change workspaces, both monitors change workspaces. When I open a program, it appears in the taskbar on both monitors. I'd like them to be more independant (but still be able to share windows between them, so separate xorg files are out). Awesome kept things separate automatically, which brings me to my next question....
    I don't want to use awesome (although it handles dual monitors exactly how I like, with no tweaking) because I'm having extended family stay over for a few weeks and I'd like to make my computer as user friendly as possible (part of me wants to do some linux converting). I'm talking totally mouse-based. OSX-esque dock, the works. Guys have any advice for the best window manager/apps to appeal to windows/mac users? Not that I want to make a windows clone. I just want something inviting, intuitive, with a low learning curve.
    Part of me is thinking of maybe just tweaking awesome so it includes titlebars, is always floating, and has a dock. Since it handles dual monitors well right now, this might be the path of least resistance.
    Thoughts?

    That's a very interesting topic. The program lxrandr is able to control the behaviour of plugged monitors but obviously it is only able to display the same content on both screens.
    so are there some lightweight programs that can differ between the content like e.g. gnome is able?
    Last edited by orschiro (2009-06-06 21:06:40)

  • Advice: Mac Mini / Dual Monitors / PC Mac Configuration

    Hey Guys, need some advice for a semi-switcher friend.
    I have a business associate who has asked me the following questions and wanted some advice from the mac forum.
    My friend's background is as professional web site developer. He is currently using Windows XP with dual monitors.
    His boss is going to buy him a Mac Mini to work along side his PC. He wants to know what would work for dual monitor / PC / Mac Mini configuration.
    Here are his questions:
    "One, what do I need to do to run dual monitors on a Mac Mini since it doesn’t have another graphics card like my PC?"
    "And two, what is the best way to use my dual monitors with my Mac and PC? Should I trash the PC and use Bootcamp/Parallels or use something like a KVM switch since the Mac doesn’t come with a keyboard or mouse?"
    "I still need to be able to do testing with IE7 and Firefox (which I believe is different on a Mac than a PC), so that’s why I considered using Bootcamp or Parallels. (I prefer Parallels due to the rebooting of Bootcamp, but am wondering if I might experience any troubles otherwise and am better off with Bootcamp since it’s a Mac product and not third-party software. I’m neutral on this.)"
    Any help or suggestions would be welcomed.
    Thank you in advance.
    Mac Mini   Mac OS X (10.4.3)  

    There is one factor you might want to pass on to your semi-switcher friend in his consideration of a mac system.
    There's a subtle difference between MacOS and Windows that can significantly impact on how well a Windows user adjusts to the Mac, particularly when used to dual head operation. Windows attaches a menu to each and every window (and application) whereas MacOS does not. While a Windows user only has to navigate to the menu bar at the top of each window, a MacOS user has to navigate to the single menu bar along the top of the screen (or primary screen if on a dual head system.
    It's not a major issue, but for a pro used to simple and quick navigation off on the secondary display, having to navigate over to the top of the primary display to do something instead of quick flick up and done, there can be a small degree of frustration and a slight impact on workflow.
    I hasten to add that with those I have seen make this very transition, the effects were short lived, but it leads to the thought that where the Mac is concerned, it might be marginally better to go for a single widescreen display than dual head.

  • Want advice on dual monitor options for touchsmart for IQ 770

    My screen is just too small (use dual monitors at work) so I bought a 2nd monitor, brought it home and there was no where to plug in the connector cords. Surprise!  Is it possible to have a dual screen with the touchscreen? A retail guy told me no when I tried to find an adaptor of some sort. Any help appreciated.

    You should be able to use a USB display adapter:
    http://www.google.com/products?hl=en&q=usb+display+adapter&um=1&ie=UTF-8&ei=Dtj4SbKGM9zKjAe4sbHKDA&s...
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • Dual monitor for Power mac g5 dual 2.3ghz

    I wanted some advice on which monitors to get for a dual monitor setup and if its even possible to setup on my G5 or do I need a different video card?
    Here's my computer spechs:
    Power mac G5 dual core 2.3 ghz (late 2005)
    Model: A1177
    Memory: 2GB DDR2 SDRAM
    HDD: 250GB
    OS X 10.5.8 Leopard
    The only thing I run on this is logic studio 8. I wanted to expand my setup but not sure how.
    Any advice is greatly appreciated! Thanks
    < Edited by Host >

    It depends on which video card you have installed, though not much.  Whichever card you have installed, you should have two DVI outputs available.  With the minimum 256 Meg VRAM, you should be able to support two 1920x1080 monitors without a problem, and the "HD" monitors are getting very plentiful and dropping in price.  Were I to buy today, I would make sure to get an LED monitor, as that flavor should have a longer overall life than a florescent panel monitor.  You can find monitors in 23" dimensions for under $200 a pop, and more 27" monitors are showing up at a slightly bigger bite.

  • Server 2012 Dual Monitor Issue - Can't Get it to work properly.

    I have a HP Proliant ML310e that runs Server 2012 R2. It came with an on-board VGA graphics adapter, that was using a Microsoft Basic Display Adapter driver and working fine.
    Needing to run dual monitors, I contacted HP and purchased a Nvida K2000 PCIE graphics card. I installed it using their latest drivers and rebooted, making sure that the new PCIE card was enabled in the BIOS.
    While booting, the server actually now displayed on the new 'second' monitor connected to the newly installed Nvida card. When I actually logged in and went into the display properties, it was only detecting the new display - I couldn't even force detect
    the original display.
    Also, when I go into device Manger, it now only shows the Nvidia graphics adapter - no longer shows that the Microsoft Basic Display Adapter is present.
    Any advice on how to get dual monitors to work on Server 2012. I did try the Windows/P Projector display, but that did nothing.
    Thanks,

    Hi,
    You should check your BIOS settings - some motherboard will disable onboard display card once a PCI(E) card is plugged in. This is a hardware settings issue. If  HP support is available, ask them for detailed configuration steps. 
    If you have any feedback on our support, please send to [email protected]

  • T420 and dual monitors using eGPC?

    Hello all,
    I just purchased my first ThinkPad, a T420 (4180 62U).  So far I really love this machine. 
    Unfortunately for me, I didn't realize that this model does not support dual external displays with the built-in graphics processor.
    I was wondering if anyone has had success with using a external graphics card along with the dock so that they can have the dual external monitors and the laptop screen running.
    If so, what hardware should I be looking at? I would welcome any advice or recommendations.
    Thanks
    Zim

    Thanks for the quick reply!
    I haven't actually tried the dock yet.  I was going to order one, then I read that you had to have the Nvida Optimus graphics card to actually do a dual monitor + laptop screen set-up which my ThinkPad does not have.
    It's my understanding that the intel graphics HD 3000 allows another monitor, it just doesn't support tow external monitors.
    Am I mistaken about this?
    If so, then I'll be real happy, because using 3 screens will be a great help when using Cisco Packet Tracer simulator, reading instructions and taking notes.
    Zim

  • Imac dual monitor primary monitor issue

    This is driving me nuts and I must be missing something...
    I have a 27" Imac (all-in-one) fully loaded with all the software I need (which I will call my old machine). I then bought another iMac but a newer one (I will call my new machine) again loaded with the software I need. I linked them together with the correct cable and the dual monitors worked great - my old machine being the primary display my new machine being the external display. It worked great for about 2 years but yesterday I thought I would like to switch the machines around so my new machine is the primary machine I work on (because it has a faster processor and some newer software) and my old machine will be the external display.
    I just cannot do it!!! The arrangement tab in the display only shows on my old machine and no matter what I do with the screen and menu bars it is always the old machine which is primary with the older software.
    I have tried unplugging each machine in different sequences, rebooting several times with always the same result - my old machine is the one with the Arrangement tab and therefore this is the primary display (with the older software).
    Can anyone offer any advice on how to resolve this please.
    Thank you in advance.
    Tony

    - What specific model iMacs do you have?
    - Just how are you connecting them?
    You may be using Target Display mode
    Target Display Mode: Frequently Asked Questions (FAQ)
    If so only the new machines can be used at a Target Display
    BTW, you posted in the Mac Mini desktop forum.

  • Dual monitors reset on AE start-up

    I'm working with a dual monitor setup with the timeline on the second monitor.  Each time the program opens, the the timeline window appears centered on the main window and it needs to be repositioned over to the 2nd monitor.
    I've tried saving the layout, without any effect on the issue.  Otherwise everything works as expected.  It's just annoying having to constantly move the window each time the program starts.
    Any advice on how to keep this from happening?
    Thanks.

    This has nothing to do with AE usually. Such stuff is handled by your graphics driver and operating system. If you let them treat multiple monitors separately and not as one huge desktop, this behavior is to be expected.
    Mylenium

  • Osx dual monitor support via rdp

    does os x rdp to windows 7 support dual monitors? I remotely login to windows7 which has dual monitors via rdp. I was wondering if I could get dual monitors for os x and keep the same display as my windows7. Any advice is appreciated

    http://beta.novell.com has a public beta for ZCM10.
    A release date has not been announced but I expect it to be announced very
    soon.
    There is also a forum for the upcoming product.....
    novell.support.beta.zenworks.configuration-management
    "christy" <[email protected]> wrote in message
    news:Dkmsi.1505$[email protected]..
    > When is the next version coming out? Is it called zen 8? Where can I find
    > information about the new features and such?
    > Thanks for the response - it is what you said a year ago when I asked but
    > I guess I was just testing to see if anybody had changed their mind.
    >
    >
    >

  • Cannot configure X for dual monitor

    Hello, I just reinstalled my Arch and I'm trying to configure X with a dual monitor setup using nouveau driver.
    This is what I get after login:
    This is what I get after using xrandr to setup:
    xrandr --output HDMI-1 --left-of VGA-1
    This is the content of /etc/X11/xorg.conf.d/20-nouveau.conf
    Section "Monitor"
    Identifier "Asus"
    Option "LeftOf" "Dell"
    Option "Primary" "False"
    EndSection
    Section "Monitor"
    Identifier "Dell"
    Option "Primary" "false"
    EndSection
    Section "Device"
    Identifier "Card"
    Driver "nouveau"
    Option "monitor-VGA-1" "Dell"
    Option "monitor-HDMI-1" "Asus"
    EndSection
    Section "Screen"
    Identifier "Screen"
    Device "Card"
    Monitor "Dell"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080" "1680x1050"
    Virtual 3600 1080
    EndSubSection
    EndSection
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen "Screen"
    EndSection
    This is the content of the X log from start till xrandr command
    [ 10.963]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 10.963]
    X.Org X Server 1.12.3.901 (1.12.4 RC 1)
    Release Date: 2012-08-03
    [ 10.963] X Protocol Version 11, Revision 0
    [ 10.963] Build Operating System: Linux 3.4.4-2-ARCH x86_64
    [ 10.963] Current Operating System: Linux markus 3.4.8-1-ARCH #1 SMP PREEMPT Thu Aug 9 21:21:22 CEST 2012 x86_64
    [ 10.963] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1019adcf-1c5a-4321-b685-a0b1ee8185d8 ro quiet
    [ 10.963] Build Date: 09 August 2012 10:04:44AM
    [ 10.963]
    [ 10.963] Current version of pixman: 0.26.2
    [ 10.963] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 10.963] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 10.963] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 16 17:44:51 2012
    [ 11.022] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 11.066] (==) ServerLayout "Default Layout"
    [ 11.066] (**) |-->Screen "Screen" (0)
    [ 11.066] (**) | |-->Monitor "Dell"
    [ 11.067] (**) | |-->Device "Card"
    [ 11.067] (==) Automatically adding devices
    [ 11.067] (==) Automatically enabling devices
    [ 11.141] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 11.141] Entry deleted from font path.
    [ 11.141] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 11.141] Entry deleted from font path.
    [ 11.141] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 11.141] Entry deleted from font path.
    [ 11.141] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 11.141] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 11.141] Entry deleted from font path.
    [ 11.141] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 11.141] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 11.141] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 11.141] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 11.141] (II) Loader magic: 0x7c8b00
    [ 11.141] (II) Module ABI versions:
    [ 11.141] X.Org ANSI C Emulation: 0.4
    [ 11.141] X.Org Video Driver: 12.1
    [ 11.141] X.Org XInput driver : 16.0
    [ 11.141] X.Org Server Extension : 6.0
    [ 11.143] (--) PCI:*(0:2:0:0) 10de:0848:1043:82e2 rev 162, Mem @ 0xfb000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
    [ 11.143] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 11.143] (II) LoadModule: "extmod"
    [ 11.144] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 11.179] (II) Module extmod: vendor="X.Org Foundation"
    [ 11.179] compiled for 1.12.3.901, module version = 1.0.0
    [ 11.179] Module class: X.Org Server Extension
    [ 11.179] ABI class: X.Org Server Extension, version 6.0
    [ 11.179] (II) Loading extension MIT-SCREEN-SAVER
    [ 11.179] (II) Loading extension XFree86-VidModeExtension
    [ 11.179] (II) Loading extension XFree86-DGA
    [ 11.179] (II) Loading extension DPMS
    [ 11.179] (II) Loading extension XVideo
    [ 11.179] (II) Loading extension XVideo-MotionCompensation
    [ 11.179] (II) Loading extension X-Resource
    [ 11.179] (II) LoadModule: "dbe"
    [ 11.179] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 11.183] (II) Module dbe: vendor="X.Org Foundation"
    [ 11.183] compiled for 1.12.3.901, module version = 1.0.0
    [ 11.183] Module class: X.Org Server Extension
    [ 11.183] ABI class: X.Org Server Extension, version 6.0
    [ 11.183] (II) Loading extension DOUBLE-BUFFER
    [ 11.183] (II) LoadModule: "glx"
    [ 11.183] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 11.209] (II) Module glx: vendor="X.Org Foundation"
    [ 11.209] compiled for 1.12.3.901, module version = 1.0.0
    [ 11.209] ABI class: X.Org Server Extension, version 6.0
    [ 11.209] (==) AIGLX enabled
    [ 11.209] (II) Loading extension GLX
    [ 11.209] (II) LoadModule: "record"
    [ 11.210] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 11.217] (II) Module record: vendor="X.Org Foundation"
    [ 11.217] compiled for 1.12.3.901, module version = 1.13.0
    [ 11.217] Module class: X.Org Server Extension
    [ 11.217] ABI class: X.Org Server Extension, version 6.0
    [ 11.217] (II) Loading extension RECORD
    [ 11.217] (II) LoadModule: "dri"
    [ 11.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 11.236] (II) Module dri: vendor="X.Org Foundation"
    [ 11.236] compiled for 1.12.3.901, module version = 1.0.0
    [ 11.236] ABI class: X.Org Server Extension, version 6.0
    [ 11.236] (II) Loading extension XFree86-DRI
    [ 11.236] (II) LoadModule: "dri2"
    [ 11.236] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 11.245] (II) Module dri2: vendor="X.Org Foundation"
    [ 11.245] compiled for 1.12.3.901, module version = 1.2.0
    [ 11.245] ABI class: X.Org Server Extension, version 6.0
    [ 11.245] (II) Loading extension DRI2
    [ 11.245] (II) LoadModule: "nouveau"
    [ 11.255] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 11.282] (II) Module nouveau: vendor="X.Org Foundation"
    [ 11.282] compiled for 1.12.2, module version = 1.0.1
    [ 11.282] Module class: X.Org Video Driver
    [ 11.282] ABI class: X.Org Video Driver, version 12.0
    [ 11.282] (II) NOUVEAU driver
    [ 11.282] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 11.282] RIVA TNT (NV04)
    [ 11.282] RIVA TNT2 (NV05)
    [ 11.282] GeForce 256 (NV10)
    [ 11.282] GeForce 2 (NV11, NV15)
    [ 11.282] GeForce 4MX (NV17, NV18)
    [ 11.282] GeForce 3 (NV20)
    [ 11.282] GeForce 4Ti (NV25, NV28)
    [ 11.282] GeForce FX (NV3x)
    [ 11.282] GeForce 6 (NV4x)
    [ 11.282] GeForce 7 (G7x)
    [ 11.282] GeForce 8 (G8x)
    [ 11.283] GeForce GTX 200 (NVA0)
    [ 11.283] GeForce GTX 400 (NVC0)
    [ 11.283] (++) using VT number 7
    [ 11.286] drmOpenDevice: node name is /dev/dri/card0
    [ 11.286] drmOpenDevice: open result is 8, (OK)
    [ 11.286] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
    [ 11.286] drmOpenDevice: node name is /dev/dri/card0
    [ 11.286] drmOpenDevice: open result is 8, (OK)
    [ 11.286] drmOpenByBusid: drmOpenMinor returns 8
    [ 11.286] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
    [ 11.286] (II) [drm] nouveau interface version: 1.0.0
    [ 11.287] (II) Loading sub module "dri"
    [ 11.287] (II) LoadModule: "dri"
    [ 11.287] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 11.287] (II) Module dri: vendor="X.Org Foundation"
    [ 11.287] compiled for 1.12.3.901, module version = 1.0.0
    [ 11.287] ABI class: X.Org Server Extension, version 6.0
    [ 11.287] (II) NOUVEAU(0): Loaded DRI module
    [ 11.287] drmOpenDevice: node name is /dev/dri/card0
    [ 11.287] drmOpenDevice: open result is 9, (OK)
    [ 11.287] drmOpenDevice: node name is /dev/dri/card0
    [ 11.287] drmOpenDevice: open result is 9, (OK)
    [ 11.287] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
    [ 11.287] drmOpenDevice: node name is /dev/dri/card0
    [ 11.287] drmOpenDevice: open result is 9, (OK)
    [ 11.287] drmOpenByBusid: drmOpenMinor returns 9
    [ 11.287] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
    [ 11.287] (II) [drm] DRM interface version 1.4
    [ 11.287] (II) [drm] DRM open master succeeded.
    [ 11.287] (--) NOUVEAU(0): Chipset: "NVIDIA NVaa"
    [ 11.287] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 11.287] (==) NOUVEAU(0): RGB weight 888
    [ 11.287] (==) NOUVEAU(0): Default visual is TrueColor
    [ 11.287] (==) NOUVEAU(0): Using HW cursor
    [ 11.287] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 11.287] (==) NOUVEAU(0): Page flipping enabled
    [ 11.288] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 11.327] (II) NOUVEAU(0): Output VGA-1 using monitor section Dell
    [ 11.327] (**) NOUVEAU(0): Option "Primary" "false"
    [ 11.381] (II) NOUVEAU(0): Output HDMI-1 using monitor section Asus
    [ 11.381] (**) NOUVEAU(0): Option "LeftOf" "Dell"
    [ 11.381] (**) NOUVEAU(0): Option "Primary" "False"
    [ 11.410] (II) NOUVEAU(0): EDID for output VGA-1
    [ 11.410] (II) NOUVEAU(0): Manufacturer: DEL Model: 4066 Serial#: 825569612
    [ 11.410] (II) NOUVEAU(0): Year: 2011 Week: 35
    [ 11.410] (II) NOUVEAU(0): EDID Version: 1.3
    [ 11.410] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 11.410] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
    [ 11.410] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 11.410] (II) NOUVEAU(0): Gamma: 2.20
    [ 11.410] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 11.410] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 11.410] (II) NOUVEAU(0): redX: 0.633 redY: 0.340 greenX: 0.319 greenY: 0.621
    [ 11.410] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.042 whiteX: 0.313 whiteY: 0.328
    [ 11.410] (II) NOUVEAU(0): Supported established timings:
    [ 11.410] (II) NOUVEAU(0): 720x400@70Hz
    [ 11.410] (II) NOUVEAU(0): 640x480@60Hz
    [ 11.410] (II) NOUVEAU(0): 640x480@75Hz
    [ 11.410] (II) NOUVEAU(0): 800x600@60Hz
    [ 11.410] (II) NOUVEAU(0): 800x600@75Hz
    [ 11.410] (II) NOUVEAU(0): 1024x768@60Hz
    [ 11.410] (II) NOUVEAU(0): 1024x768@75Hz
    [ 11.410] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 11.410] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 11.410] (II) NOUVEAU(0): Supported standard timings:
    [ 11.410] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 11.410] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 11.410] (II) NOUVEAU(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 11.410] (II) NOUVEAU(0): Supported detailed timing:
    [ 11.410] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 509 x 286 mm
    [ 11.410] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 11.410] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 11.410] (II) NOUVEAU(0): Serial No: WPDV118P151L
    [ 11.410] (II) NOUVEAU(0): Monitor name: DELL P2311H
    [ 11.410] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 11.410] (II) NOUVEAU(0): EDID (in hex):
    [ 11.410] (II) NOUVEAU(0): 00ffffffffffff0010ac66404c313531
    [ 11.410] (II) NOUVEAU(0): 231501030e331d78ea0cb4a257519f27
    [ 11.410] (II) NOUVEAU(0): 0a5054a54b00714f8180d1c001010101
    [ 11.410] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 11.410] (II) NOUVEAU(0): 4500fd1e1100001e000000ff00575044
    [ 11.410] (II) NOUVEAU(0): 56313138503135314c0a000000fc0044
    [ 11.410] (II) NOUVEAU(0): 454c4c205032333131480a20000000fd
    [ 11.410] (II) NOUVEAU(0): 00384c1e5311000a2020202020200054
    [ 11.410] (II) NOUVEAU(0): EDID vendor "DEL", prod id 16486
    [ 11.426] (II) NOUVEAU(0): Using EDID range info for horizontal sync
    [ 11.426] (II) NOUVEAU(0): Using EDID range info for vertical refresh
    [ 11.426] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 11.426] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 11.426] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 11.426] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 11.426] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 11.426] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 11.426] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 11.426] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 11.426] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 11.427] (II) NOUVEAU(0): Printing probed modes for output VGA-1
    [ 11.427] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz UeP)
    [ 11.427] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 11.427] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 11.481] (II) NOUVEAU(0): EDID for output HDMI-1
    [ 11.481] (II) NOUVEAU(0): Manufacturer: ACI Model: 22f1 Serial#: 16843009
    [ 11.481] (II) NOUVEAU(0): Year: 2008 Week: 31
    [ 11.481] (II) NOUVEAU(0): EDID Version: 1.3
    [ 11.481] (II) NOUVEAU(0): Digital Display Input
    [ 11.481] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
    [ 11.481] (II) NOUVEAU(0): Gamma: 2.20
    [ 11.481] (II) NOUVEAU(0): DPMS capabilities: Off
    [ 11.481] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 11.481] (II) NOUVEAU(0): Default color space is primary color space
    [ 11.481] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 11.481] (II) NOUVEAU(0): redX: 0.649 redY: 0.335 greenX: 0.283 greenY: 0.605
    [ 11.481] (II) NOUVEAU(0): blueX: 0.151 blueY: 0.073 whiteX: 0.313 whiteY: 0.329
    [ 11.481] (II) NOUVEAU(0): Supported established timings:
    [ 11.481] (II) NOUVEAU(0): 720x400@70Hz
    [ 11.481] (II) NOUVEAU(0): 640x480@60Hz
    [ 11.481] (II) NOUVEAU(0): 640x480@67Hz
    [ 11.481] (II) NOUVEAU(0): 640x480@72Hz
    [ 11.481] (II) NOUVEAU(0): 640x480@75Hz
    [ 11.481] (II) NOUVEAU(0): 800x600@56Hz
    [ 11.481] (II) NOUVEAU(0): 800x600@60Hz
    [ 11.481] (II) NOUVEAU(0): 800x600@72Hz
    [ 11.481] (II) NOUVEAU(0): 800x600@75Hz
    [ 11.481] (II) NOUVEAU(0): 832x624@75Hz
    [ 11.481] (II) NOUVEAU(0): 1024x768@60Hz
    [ 11.481] (II) NOUVEAU(0): 1024x768@70Hz
    [ 11.481] (II) NOUVEAU(0): 1024x768@75Hz
    [ 11.481] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 11.481] (II) NOUVEAU(0): 1152x864@75Hz
    [ 11.481] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 11.481] (II) NOUVEAU(0): Supported standard timings:
    [ 11.481] (II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 11.481] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 11.481] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 11.481] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 11.481] (II) NOUVEAU(0): #4: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
    [ 11.481] (II) NOUVEAU(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 11.481] (II) NOUVEAU(0): Supported detailed timing:
    [ 11.481] (II) NOUVEAU(0): clock: 146.2 MHz Image Size: 474 x 296 mm
    [ 11.481] (II) NOUVEAU(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
    [ 11.481] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
    [ 11.481] (II) NOUVEAU(0): Serial No: 88LMVD003225
    [ 11.481] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 175 MHz
    [ 11.481] (II) NOUVEAU(0): Monitor name: ASUS-LS221Hÿÿ
    [ 11.481] (II) NOUVEAU(0): Supported detailed timing:
    [ 11.481] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 474 x 296 mm
    [ 11.481] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 11.481] (II) NOUVEAU(0): v_active: 1080 v_sync: 1089 v_sync_end 1095 v_blanking: 1125 v_border: 0
    [ 11.481] (II) NOUVEAU(0): Supported detailed timing:
    [ 11.481] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 474 x 296 mm
    [ 11.481] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 11.481] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 11.481] (II) NOUVEAU(0): Supported detailed timing:
    [ 11.481] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 474 x 296 mm
    [ 11.481] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 11.481] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 11.481] (II) NOUVEAU(0): Supported detailed timing:
    [ 11.481] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 474 x 296 mm
    [ 11.481] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 11.481] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 11.481] (II) NOUVEAU(0): Supported detailed timing:
    [ 11.481] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 474 x 296 mm
    [ 11.481] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 11.481] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 11.481] (II) NOUVEAU(0): Number of EDID sections to follow: 1
    [ 11.482] (II) NOUVEAU(0): EDID (in hex):
    [ 11.482] (II) NOUVEAU(0): 00ffffffffffff000469f12201010101
    [ 11.482] (II) NOUVEAU(0): 1f120103802f1e782e78f5a655489b26
    [ 11.482] (II) NOUVEAU(0): 125054bfef80b30081809500950f9040
    [ 11.482] (II) NOUVEAU(0): 714f0101010121399030621a274068b0
    [ 11.482] (II) NOUVEAU(0): 3600da281100001c000000ff0038384c
    [ 11.482] (II) NOUVEAU(0): 4d56443030333232350a000000fd0038
    [ 11.482] (II) NOUVEAU(0): 4b1f5111000a202020202020000000fc
    [ 11.482] (II) NOUVEAU(0): 00415355532d4c5332323148ffff0107
    [ 11.482] (II) NOUVEAU(0): Printing probed modes for output HDMI-1
    [ 11.482] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz UeP)
    [ 11.482] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
    [ 11.482] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1089 1095 1125 -hsync -vsync (67.5 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1440x576"x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "1440x480"x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 11.482] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 11.482] (II) NOUVEAU(0): Output VGA-1 connected
    [ 11.482] (II) NOUVEAU(0): Output HDMI-1 connected
    [ 11.482] (II) NOUVEAU(0): Using user preference for initial modes
    [ 11.482] (II) NOUVEAU(0): Output VGA-1 using initial mode 1920x1080
    [ 11.482] (II) NOUVEAU(0): Output HDMI-1 using initial mode 1920x1080
    [ 11.482] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 11.482] (--) NOUVEAU(0): Virtual size is 3600x1080 (pitch 0)
    [ 11.482] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
    [ 11.482] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz UeP)
    [ 11.482] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    [ 11.482] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 11.482] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 11.482] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 11.482] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 11.482] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 11.482] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 11.482] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 11.482] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 11.482] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 11.482] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 11.482] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 11.482] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 11.482] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 11.482] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 11.482] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 11.482] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 11.482] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 11.482] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 11.482] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 11.482] (**) NOUVEAU(0): Display dimensions: (510, 290) mm
    [ 11.482] (**) NOUVEAU(0): DPI set to (179, 94)
    [ 11.482] (II) Loading sub module "fb"
    [ 11.482] (II) LoadModule: "fb"
    [ 11.496] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 11.507] (II) Module fb: vendor="X.Org Foundation"
    [ 11.508] compiled for 1.12.3.901, module version = 1.0.0
    [ 11.508] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.508] (II) Loading sub module "exa"
    [ 11.508] (II) LoadModule: "exa"
    [ 11.508] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 11.517] (II) Module exa: vendor="X.Org Foundation"
    [ 11.517] compiled for 1.12.3.901, module version = 2.5.0
    [ 11.517] ABI class: X.Org Video Driver, version 12.1
    [ 11.517] (II) Loading sub module "shadowfb"
    [ 11.517] (II) LoadModule: "shadowfb"
    [ 11.517] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 11.522] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 11.522] compiled for 1.12.3.901, module version = 1.0.0
    [ 11.522] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.522] (--) Depth 24 pixmap format is 32 bpp
    [ 11.523] (II) NOUVEAU(0): Opened GPU channel 2
    [ 11.527] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 11.527] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 11.527] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 11.529] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 11.529] (II) EXA(0): Driver registered support for the following operations:
    [ 11.529] (II) Solid
    [ 11.529] (II) Copy
    [ 11.529] (II) Composite (RENDER acceleration)
    [ 11.529] (II) UploadToScreen
    [ 11.529] (II) DownloadFromScreen
    [ 11.529] (==) NOUVEAU(0): Backing store disabled
    [ 11.529] (==) NOUVEAU(0): Silken mouse enabled
    [ 11.529] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 11.529] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 11.529] (==) NOUVEAU(0): DPMS enabled
    [ 11.529] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 11.529] (WW) NOUVEAU(0): Option "Primary" is not used
    [ 11.529] (--) RandR disabled
    [ 11.529] (II) Initializing built-in extension Generic Event Extension
    [ 11.529] (II) Initializing built-in extension SHAPE
    [ 11.530] (II) Initializing built-in extension MIT-SHM
    [ 11.530] (II) Initializing built-in extension XInputExtension
    [ 11.530] (II) Initializing built-in extension XTEST
    [ 11.530] (II) Initializing built-in extension BIG-REQUESTS
    [ 11.530] (II) Initializing built-in extension SYNC
    [ 11.530] (II) Initializing built-in extension XKEYBOARD
    [ 11.530] (II) Initializing built-in extension XC-MISC
    [ 11.530] (II) Initializing built-in extension SECURITY
    [ 11.530] (II) Initializing built-in extension XINERAMA
    [ 11.530] (II) Initializing built-in extension XFIXES
    [ 11.530] (II) Initializing built-in extension RENDER
    [ 11.530] (II) Initializing built-in extension RANDR
    [ 11.530] (II) Initializing built-in extension COMPOSITE
    [ 11.530] (II) Initializing built-in extension DAMAGE
    [ 11.843] (EE) AIGLX error: Calling driver entry point failed
    [ 11.852] (EE) AIGLX: reverting to software rendering
    [ 11.852] (II) AIGLX: Screen 0 is not DRI capable
    [ 12.107] (II) AIGLX: Loaded and initialized swrast
    [ 12.107] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 12.120] (II) NOUVEAU(0): NVEnterVT is called.
    [ 12.331] (II) NOUVEAU(0): Setting screen physical size to 1016 x 285
    [ 12.331] resize called 3840 1080
    [ 12.709] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [ 12.709] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 12.709] (II) LoadModule: "evdev"
    [ 12.709] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 12.748] (II) Module evdev: vendor="X.Org Foundation"
    [ 12.748] compiled for 1.12.3.901, module version = 2.7.3
    [ 12.748] Module class: X.Org XInput Driver
    [ 12.748] ABI class: X.Org XInput driver, version 16.0
    [ 12.748] (II) Using input driver 'evdev' for 'Power Button'
    [ 12.748] (**) Power Button: always reports core events
    [ 12.748] (**) evdev: Power Button: Device: "/dev/input/event5"
    [ 12.748] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 12.748] (--) evdev: Power Button: Found keys
    [ 12.748] (II) evdev: Power Button: Configuring as keyboard
    [ 12.748] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
    [ 12.748] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 12.748] (**) Option "xkb_rules" "evdev"
    [ 12.748] (**) Option "xkb_model" "evdev"
    [ 12.748] (**) Option "xkb_layout" "it"
    [ 12.792] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
    [ 12.792] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 12.792] (II) Using input driver 'evdev' for 'Video Bus'
    [ 12.792] (**) Video Bus: always reports core events
    [ 12.792] (**) evdev: Video Bus: Device: "/dev/input/event6"
    [ 12.792] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 12.792] (--) evdev: Video Bus: Found keys
    [ 12.792] (II) evdev: Video Bus: Configuring as keyboard
    [ 12.792] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:19/LNXVIDEO:00/input/input6/event6"
    [ 12.792] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 12.793] (**) Option "xkb_rules" "evdev"
    [ 12.793] (**) Option "xkb_model" "evdev"
    [ 12.793] (**) Option "xkb_layout" "it"
    [ 12.794] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 12.794] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 12.794] (II) Using input driver 'evdev' for 'Power Button'
    [ 12.794] (**) Power Button: always reports core events
    [ 12.794] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 12.794] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 12.794] (--) evdev: Power Button: Found keys
    [ 12.794] (II) evdev: Power Button: Configuring as keyboard
    [ 12.794] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 12.794] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 12.794] (**) Option "xkb_rules" "evdev"
    [ 12.794] (**) Option "xkb_model" "evdev"
    [ 12.794] (**) Option "xkb_layout" "it"
    [ 12.796] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
    [ 12.796] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 12.796] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 12.796] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 12.796] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event0"
    [ 12.796] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc043
    [ 12.796] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 12.796] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 12.796] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 12.796] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 12.796] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 12.796] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 12.796] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 12.796] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 12.796] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input0/event0"
    [ 12.796] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
    [ 12.796] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 12.796] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 12.796] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 12.796] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 12.796] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 12.797] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 12.797] (II) No input driver specified, ignoring this device.
    [ 12.797] (II) This device may have been added with another device file.
    [ 12.797] (II) config/udev: Adding input device LOGITECH G110 G-keys (/dev/input/event1)
    [ 12.797] (**) LOGITECH G110 G-keys: Applying InputClass "evdev keyboard catchall"
    [ 12.797] (II) Using input driver 'evdev' for 'LOGITECH G110 G-keys'
    [ 12.797] (**) LOGITECH G110 G-keys: always reports core events
    [ 12.797] (**) evdev: LOGITECH G110 G-keys: Device: "/dev/input/event1"
    [ 12.797] (--) evdev: LOGITECH G110 G-keys: Vendor 0x46d Product 0xc22b
    [ 12.797] (--) evdev: LOGITECH G110 G-keys: Found keys
    [ 12.797] (II) evdev: LOGITECH G110 G-keys: Configuring as keyboard
    [ 12.797] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1:1.0/input/input1/event1"
    [ 12.797] (II) XINPUT: Adding extended input device "LOGITECH G110 G-keys" (type: KEYBOARD, id 10)
    [ 12.797] (**) Option "xkb_rules" "evdev"
    [ 12.797] (**) Option "xkb_model" "evdev"
    [ 12.797] (**) Option "xkb_layout" "it"
    [ 12.797] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event2)
    [ 12.797] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
    [ 12.797] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
    [ 12.797] (**) Gaming Keyboard G110: always reports core events
    [ 12.797] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event2"
    [ 12.797] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
    [ 12.797] (--) evdev: Gaming Keyboard G110: Found keys
    [ 12.797] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
    [ 12.797] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.3/1-2.3:1.0/input/input2/event2"
    [ 12.797] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 11)
    [ 12.797] (**) Option "xkb_rules" "evdev"
    [ 12.797] (**) Option "xkb_model" "evdev"
    [ 12.797] (**) Option "xkb_layout" "it"
    [ 12.798] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event3)
    [ 12.798] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
    [ 12.798] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
    [ 12.798] (**) Gaming Keyboard G110: always reports core events
    [ 12.798] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event3"
    [ 12.798] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
    [ 12.798] (--) evdev: Gaming Keyboard G110: Found keys
    [ 12.798] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
    [ 12.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.3/1-2.3:1.1/input/input3/event3"
    [ 12.798] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 12)
    [ 12.798] (**) Option "xkb_rules" "evdev"
    [ 12.798] (**) Option "xkb_model" "evdev"
    [ 12.798] (**) Option "xkb_layout" "it"
    [ 12.798] (II) config/udev: Adding input device UVC Camera (046d:081b) (/dev/input/event7)
    [ 12.798] (**) UVC Camera (046d:081b): Applying InputClass "evdev keyboard catchall"
    [ 12.798] (II) Using input driver 'evdev' for 'UVC Camera (046d:081b)'
    [ 12.798] (**) UVC Camera (046d:081b): always reports core events
    [ 12.798] (**) evdev: UVC Camera (046d:081b): Device: "/dev/input/event7"
    [ 12.798] (--) evdev: UVC Camera (046d:081b): Vendor 0x46d Product 0x81b
    [ 12.798] (--) evdev: UVC Camera (046d:081b): Found keys
    [ 12.798] (II) evdev: UVC Camera (046d:081b): Configuring as keyboard
    [ 12.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2.2/2-2.2:1.0/input/input7/event7"
    [ 12.798] (II) XINPUT: Adding extended input device "UVC Camera (046d:081b)" (type: KEYBOARD, id 13)
    [ 12.798] (**) Option "xkb_rules" "evdev"
    [ 12.798] (**) Option "xkb_model" "evdev"
    [ 12.798] (**) Option "xkb_layout" "it"
    [ 84.333] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 144.460] (II) NOUVEAU(0): NVEnterVT is called.
    [ 144.544] (II) NOUVEAU(0): EDID vendor "DEL", prod id 16486
    [ 144.544] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 144.544] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 144.544] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 144.544] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 144.544] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 144.544] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 144.544] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 144.544] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 144.544] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 144.544] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 144.544] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 144.544] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 144.544] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 144.544] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 144.544] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 154.758] (II) NOUVEAU(0): EDID vendor "DEL", prod id 16486
    [ 154.758] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 154.758] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 154.758] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 154.758] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 154.758] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 154.758] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 154.758] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 154.758] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 154.758] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 154.758] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 154.758] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 154.758] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 154.758] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 154.758] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 154.758] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 154.880] resize called 1920 1080
    [ 233.862] (II) NOUVEAU(0): EDID vendor "DEL", prod id 16486
    [ 233.862] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 233.862] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 233.862] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 233.862] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 233.862] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 233.862] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 233.862] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 233.862] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 233.862] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 233.862] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 233.862] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 233.862] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 233.862] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 233.862] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 233.862] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 233.920] resize called 3600 1080
    Any hints on what it's not working? I use Slim as login manager, and when it comes up, the left screen only show a small portion of the screen.

    Option "monitor-VGA-1" "Dell"
    Option "monitor-HDMI-1" "Asus"
    Do you need the word monitor in there? I was under the impression you only needed "VGA-1". I'm having a similar problem to you though so don't take my advice too carefully (why didn't I back up my old conf file :'()
    Edit; You do.
    Here is my krandrrc from when I used KDE. Could you put something in your autostart as a hack?
    [Display]
    ApplyOnStartup=true
    StartupCommands=xrandr --output VGA-1 --pos 1920x0 --mode 1440x900 --refresh 59.8874\nxrandr --output DVI-I-1 --pos 0x0 --mode 1920x1080 --refresh 60\nxrandr --output VGA-1 --primary
    [Screen_0]
    OutputsUnified=false
    UnifiedRect=0,0,0,0
    UnifiedRotation=1
    [Screen_0_Output_DVI-I-1]
    Active=true
    Rect=0,0,1920,1080
    RefreshRate=60
    Rotation=1
    [Screen_0_Output_VGA-1]
    Active=true
    Rect=1920,0,1440,900
    RefreshRate=59.8874435424805
    Rotation=1
    Last edited by SS4 (2012-08-16 23:49:09)

  • Docked X60 - Dual Monitor question

    Hi All !
    I have an X60 docked on an X6 Ultrabase...I'd like to run a couple of HP 1740 TFT monitors off the laptop (without the integrated screen operational) in the usual FN + F7 fashion.
    I thought I might be able to use one of these to split the output and run up both monitors in parallel ? Will this work and detect the dual monitor real estate or do i have no choice but to go with one of these
    Hope you have some advice ?
    Cheers
    Scott

    scott_b, welcome to the forum,
    I think you'll find your answer in this thread
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • XFCE + dual monitor setup question

    Hi,
    I just used the wiki guides to install arch and xfce, the desktop is extended horizontally on my 2 monitors, I used aticonfig.
    the problem is if I start a an application in 1 monitor I cannot drag it to the 2nd monitor, how do I achieve that?
    thx.

    @pinkfish, re etiquette, don't worry too much about it.  I've seen worse and at least you're willing to take advice and a bit of constructive criticism.  Some people I have seen on forums immediately fire a shot over the bow, to use a naval phrase, thinking they need to defend themselves from other forum citizens.
    I meant to ask, are you trying to get one big desktop then or a "true" dual monitor (separate x-session) situation?  You might want to try one then the other.  I know when I had an ATI card I found it difficult, if not impossible, to get dual monitors working properly yet the big desktop option did work on most systems.

  • OpenGL freezes computer with dual monitors and fglrx

    I am trying to use the fglrx driver, and with a single monitor I seem to have gotten everything working.
    However I am running into issues with two monitors. Basically, when I have two monitors any opengl program doesn't run properly.
    There are two cases. If I use the xorg.conf generated by "aticonfig --initial", it still seems to detect the other monitor (although there is a black region on my gnome desktop). If an opengl program is run, the screen goes crazy where random pixels are changing different colors. I can end the program, and everything goes back to normal.
    Using the program "amdcccle" I generated xorg.conf for dual monitors (I pasted it below). When I use this configuration, any opengl program completely freezes the computer instantly.
    I have been looking for a while, but have not found any information that might lead to a solution. Does anyone here have any advice?
    Section "ServerLayout"
    Identifier "amdcccle Layout"
    Screen 0 "amdcccle-Screen[1]-0" 0 0
    EndSection
    Section "Monitor"
    Identifier "0-DFP1"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1680x1050"
    Option "TargetRefresh" "60"
    Option "Position" "1920 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Monitor"
    Identifier "0-DFP10"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    Option "Position" "0 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    EndSection
    Section "Device"
    Identifier "amdcccle-Device[1]-0"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    Option "Monitor-DFP1" "0-DFP1"
    Option "Monitor-DFP10" "0-DFP10"
    EndSection
    Section "Screen"
    Identifier "amdcccle-Screen[1]-0"
    Device "amdcccle-Device[1]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Virtual 3600 1920
    Depth 24
    EndSubSection
    EndSection

    +Sorry. I mean "right" in the last sentence.+
    Hello.
    I put my second monitor of a dual monitor set-up to the left of the main monitor - the one with the FC application, keyboard and mouse, etc. Trouble is the mouse kept hitting the left hand wall of my main monitor when I tried to send it to the second monitor. After a while I realized the mouse/computer thinks the second monitor is to its right, so I have to exit the right hand side of the main monitor to get to the one on the left.
    Is there any way to instruct FC and the mouse that the second monitor is on the left? Can the mouse be instructed to "pass" through the left hand wall of the main monitor rather than the right? Or must the second monitor always go the right of the main monitor?
    Thanks.
    John

Maybe you are looking for

  • SharePoint 2010 SQL Permission Errors

    We occasionally receive errors in the Event Log for SQL permission errors. I am not able to find what exactly is causing the issue and don't want to grant rights to something if I don't know what it is doing. There error is not specific to a particul

  • BenQ 19" Widescreen FP92W - Incompatible?

    Hello all. I first saw this new BenQ 19" Widescreen monitor FP92W at a PC Show a shortwhile ago, and was interested to get it for my sis's new Mac mini soon... See http://benq.com.sg/products/LCD/?product=780&tid=12 But I was told that this monitor i

  • Captivate 8, Publish, Project Title isn't remembered if it is the same as file name

    Example: Publish a Captivate 8 project and change the Project Title to 'Test' Save the project as 'FinalTest' Publish the project again and change the Project Title to 'FinalTest' (It should be remember 'Test' from before) Publish the project again a

  • So multi tasking..phone and messages showing up in multitask bar

    So this sounds silly.. i m kinda confused on how the multi tasking works..right now i am have only 2 apps running in the background phone and messages..does that drain my battery by running or r those frozen..and i feel like the multitask bar is in s

  • Cs4 Cs5.5 Mpeg2 problems?

    Recently upgraded the machines from CS4 to CS5.5 and the render results of the MPEG2s we produce have dropped considerably. There is a lot of degradation around type and it especially shows on blocks of static pieces of  solid colour. Anyone know why