Dual monitor connection for ATI Radeon 4350

I have HP Pavilion Elite e9300z PC with 512MB ATI Radeon HD 4350 [DVI, HDMI, VGA adaptor]... I want to connect a 2nd monitor to video card. I think my current monitor is HDMI, so for the other (DVI) is it dual-link? In other words, should I get a dual-link DVI cable or a regular DVI-D cable? Thanks.

Regular DVI-D cable shoould work, your monitor must have a DVI-D and not a DVI-I port...
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Similar Messages

Dual monitors on the ATI Radeon 9600 XT black screen on 2nd monitor

i have problem on second monitor , it always turn black during my work, and in a second it turn back to work well again, about 20-30 minutes a time .
can anyone here give me some help ? it really make me go crazy....
Thanks!
POWER MAC G5 DUAL 2.5 +ATI Radeon 9600 XT+2 SUMSUNG 205BW
The one connected to the ADC no problme.

LOGIC CAT-
My guess is either a bad cable or bad adapter on the second monitor. Try switching the monitors and see if the problem follows the monitor.
Luck-
-DaddyPaycheck

How to install drivers for ati radeon 3200?and how to config xorg.co ?

how to install drivers for ati radeon 3200?and how to config xorg.conf?

mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
Hello
I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
#pacman -Sy
#pacman -S -l | grep -i catalyst
#pacman -S catalyst catalyst-utils
After installation reboot your machine in runlevel 1. (single mode). Ensure "fglrx" module is loaded correctly using
#lsmod | grep -i fglrx
If the resultant output have "fglrx" part the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
#cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
Then issue
#aticonfig --initial --input=/etc/X11/xorg.conf
This will create a new xorg.conf file. Now we can test our confign.
#telinit 3
I am using runlevel 3 to avoid graphic messup!!
issue
#gdm
If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
To know your ati driver is working correctly issue as root
#fgl_glxgears
If gears are rolling happily it seems correct. You can also know more about installed ati driver
#fglrxinfo
Now the installed driver version is in the output
If there is any problem try following
##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
yes video playback is choppy until i ran :-
sudo aticonfig --overlay-type=Xv
Try adding the following to the 'Device' section in /etc/X11/xorg.conf
Option "TexturedVideo" "true"
### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
mythfrontend --geometry 800x600
Append the "Device" Section of /etc/X11/xorg.conf file as follows;
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "on"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
export LIBGL_ALWAYS_INDIRECT=true
####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
####### as in the following example
title Archlinux Ice Kernel
root (hd0,1)
kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
initrd /boot/kernel26-ice.img
NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!! ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
Wish U good luck
mvdvarrier

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

Crash in OpenCL clBuildProgram for ATI Radeon 5870

Hi,
Need some help in understanding why the following simple OpenCL kernel crashes during runtime build on Mac OS 10.6.4 (EFI driver version 01.00.436 for ATI Radeon 5870)
====================
__kernel void KernelThatDoesntWork(__global const float* a, __global const float* b, __global float* c, int iNumElements)
__local unsigned char lmemC[100]; // Array of size 100, ignore the exclusion of [ ]
lmemC[0] = 0;
====================
Here is the stack trace -
#0 0x94b67ef6 in __kill ()
#1 0x94b67ee8 in kill$UNIX2003 ()
#2 0x94bfa62d in raise ()
#3 0x94c10679 in __abort ()
#4 0x94bf33bc in _stack_chkfail ()
#5 0x00422b8b in glrCompExecuteKernel ()
#6 0x00424d9c in glrCompBuildProgram ()
#7 0x91db653a in clBuildProgram ()
Thanks
Message was edited by: shantanu_bmd

Even if they make it available, does this change mean other Radeon 5870 based cards will work in the system? If so, does this mean Radeon 5870 based eyefinity 6 cards will work with the new mac pros, and hopefully the old ones with a driver/software update? That would make it an even more significant refresh from a graphics point of view...
In any case, if other 5870 based cards would work, that would be the easiest solution for getting hold of the required card as there are loads of cards already available for purchase based on the 5870 GPU...

Need newest driver for ATI Radeon 3650 - Satellite Pro A300-1NT

Hello everyone,
I am looking for the newest drivers for ATI Radeon HD 3650 onboard Satelite Pro A300-1NT.
During playing Transformers: Revenge of the Fallen (2009) game by Beenox Inc ..... I get pixelized squares on tthe screen (instead of dust) and eventually blue screen.
I am using Windows XP Pro
I looked for drivers on *Toshiba website* and the only I found are:
12/01/09 Display Driver ATI Windows XP 8.477
*Game support* suggests upgrading driver for a newer one.
*Ati manufacturer support* have driver for ATI Radeon 8650 but not compatibile with Mobile Solution - and when asked for Mobile Ati support I got the ansfer:
+AMD Customer Care for ATI products does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.+
+ [http://support.amd.com/us/kbarticles/Pages/737-28041SupportforATIMobility.aspx|http://support.amd.com/us/kbarticles/Pages/737-28041SupportforATIMobility.aspx] +
I ask then are there newest drivers for Windows XP

Hi
I think you have already answered this question by yourself...
As you wrote you can get all drivers on the Toshiba website and if there isnt a newer driver available you can nothing more I think. Satellite A300 isnt a high performance gaming notebook so I think display drivers are not so important.
The only way to get a newer version is that you search on external websites. Maybe you can get the desktop driver working due some modifications I dont know but be really careful!!! Other drivers dont have an overheat protection and you could destroy the graphic chip. Be really careful what you do.
Alternative you can search on the Toshiba website for other notebook models with ATI card too. Maybe there you can get a newer version

Better replacement for ATI Radeon HD 5770

Hello. I have in my Mid 2010 Mac Pro the ATI Radeon HD 5770 1024 MB. What graphics card is out there that has better graphics and also supports 3 to 4 monitors easily? My budget is in the 300 to 400 range. I've seen the EVGA GeForce GTX 680 for Mac, which is amazing, but out of my budget. I need to get three monitors running soon.

Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
Guide to Apple graphic display adapters needed
https://support.apple.com/kb/HT3235
Atlona (Dual Link) DVI to Mini DisplayPort Converter for Apple 27-inch LED and 27-inch iMac
http://www.atlona.com/Atlona-Dual-Link-DVI-to-Mini-DisplayPort-Converter-USB-Pow ered.html
Mac Pro (Early 2009), Mac Pro (Mid 2010), Mac Pro (Mid 2012): Issues with three displays and multiple DVI, HDMI connections
It's not the USB data that is needed to run three displays. It's the extra POWER. If you read the Apple article, they say the only solution they endorse is their US$100 Dual-Link adapters. Check the table at the end of the article.
Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
Readers here have found that if you have two Brand-X Powered adapters, aka active adapters, it also works fine. These do not always require another USB. If designed recently, they can pick up a power pin in the Mini DisplayPort interface.
AMD (makers of the 5770 and 5870) lists the qualified POWERED adapters that meet their most stringent requirements. Look down the page and you will find several qualified Active Mini DisplyPort to various others, such as HDMI. These adapters are available from other outlets, such as Amazon, sometimes for far less than the Apple adapters.
http://support.amd.com/us/eyefinity/Pages/eyefinity-dongles.aspx
The other desktop monitor will plug directly into the DVI port on the card and the 40 inch tv will still connect via HDMI over the second Mini Display port.
That will work only if you use an active Mini DisplayPort to HDMI adapter.
The only (someone) have found to work (2009)
http://www.alibaba.com/product-gs/337561577/miniactive_display_port_tohdmi.html
but you should confirm that they are really active before buying 500 of them.
You can connect a DVI to HDMI adapter or cable to an active Mini DisplayPort to DVI adapter but that won't give you any audio over HDMI. You could connect the DVI displays to the Mini DisplayPorts with active adapters and use a DVI to HDMI cable or adapter from the DVI port to the TV.
If you want audio via HDMI, you can use audio from the Mac Pro's optical output with this DVI to HDMI converter:
http://www.apogeeinc.net/products/item.aspx?item=2745
Active MDP to HDMI audio and video converter:
http://ca.startech.com/AV/Displayport-Converters/Mini-DisplayPort-to-HDMI-Active -Video-and-Audio-Adapter-Converter-Mini-DP-to-HDMI-1920x1200~MDP2HDS

In search of drivers for ATI Radeon 7000

I recently purchased a used ATI Radeon 7000 PCI video card for my G3 beige, OS 9.2.2. This is an older model card with just the single VGA output. This comes up as card name "ATI, Bluestar", and card model "ATI, RV100" under Apple System Profiler so I'm a bit confused about that to start with. However, since ASP recognizes it I guess it seems to work though I haven't plugged my monitor into it yet.
The problem is the drivers.
I went to ATI's website to look for drivers to download to get this card working. They have an OS9 updater (ati-retail-9-2-2-jan2005.hqx) that should install a bunch of components. When I run it it only installs a partial set, contrary to what it says it should do. I've seen other postings on Apple Discussions about problems with this installer. ATI seems to make it impossible to contact them other than by telephone which is only open to original purchasers so I can't even tell them there's a problem (much less expect them to do anything about it). A search for Bluestar or RV100 reveals nothing on ATI's website.
Has anybody gotten this installer to work? Is there some other source for drivers for this card? Can somebody e-mail them to me (I don't think this violates any rules since in theory they are openly down-loadable)?
Thanks,
Brian
G3 beiges:DT, 9.2.2, 120GBide; DT, 9.2.2/OS X.3, 120GBide; MT, 8.6/9.2.2, 128MB,

Thanks to all for answering my questions. I decided in the end to just plug my monitor into the card and give it a try despite not haveing the groundwork properly set up. It works so it must be a Mac version of the card. This website (http://www.welovemacs.com/radeon7000vga.html) describes the card, including the model number (but I paid a LOT, LOT less than their price!).
Yes, the installer does put all kinds of things in the System, but not the promised control panel. It looks like the CP isn't essential to the working of the card so I'm not worrying anymore. I used the Apple monitors control panel to set the resolution a few times but it froze up on me once when setting it to 640x480. After that I pulled a copy of Super Res that I had in storage and have been using that.
As to the graphics acceleration, it's kind of hard to tell. I tried viewing a mp4 video clip I have with Quicktime 6. Before the card I could maybe watch a minute before my computer would freeze up. Now I can watch maybe 3 minutes before it freezes up, but the video is very jerky, even when compared to the one minute before card installation. I may now be experiencing the limitations of my 266 MHz G3 in terms of decoding mp4, but this doesn't explain why video seemed smoother before, brief though it was before a freeze.
I then tried a video game. Actually video wasn't too slow with this even with my old configuration. Now things seem to hesitate when the play gets busy and it remids me of when I used to play Crystal Quest on a Mac SE. In this case the card has made things slower.
With general scrolling I don't really notice a difference. There's still hesitation at times. In all the cases I have mentioned the ATI thing in the menu bar says grahics acceleration is on.
So in actuality I haven't really noticed any improvement with this card. If anybody has any tips on ways to tune the system to take more advantage of the card I'd welcome them.
Thanks,
Brian

Need Power Connector Cable for ATI Radeon X1900 XT

I need the 6pin power connector/cable for my ATI Radeon X1900 XT to work with my Mac Pro.
I can't use the card as I lost the small cable pior to installation and now I can't find one anywhere.
It is the 6 pin cable that connects into the Radeon X1900 XT and the other end into the Mac Pro motherboard.
Can someone help me?
Thank you

Worst service ever at the local(Canada) Montreal/Laval Apple Store........''go ask ATI or call Apple, etc....''
that was helpfull
I go to Apple because it is an Apple card and I get service like I was asking for a PC.
Typical of Apple, you buy their stuff then they turn your back on you in case that you need some help.

Graphics config error for ATI Radeon X1200

I have recently attempted to load OS 10 x86 on to my Toshiba Satellite A215-S5825. This lap top has an ** ATI Radeon x1200 ** graphics card. Im am getting the following errors. Can anyone provide me with some direction on how I might resolve? Thank you
Unable to locate / open config file
New driver is "ati"
Failed to load module "dri" ( module does not exist, 0)
Failed to load module "xtsol" ( module does not exist, 0)
Failed to load module "Fbdev" ( module does not exist, 0)
VESA (0): No matching modes
Screen(s) found, but none have a usable configuaration.
Fatal server error:
No screens found on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining.
XIO: fatal IO error 146 ( Connection refused) on Xserver "0.0" after 0 request (0 known processed) with 0 events remaining.
error (pid1304): Server for display :0 can't be started.
error ( pid 565): Server for display :0 terminated unexpectedly 1
X Window system Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operationg System: SunOS 5.10 Generic i86pc
Solaris ABI: 32 bit
SUNWxorg - server package version: 6.8.0.5.10.7400, REV=0.2004.12.15
SUNWxorg - server patches applied: 12570-10
SUNWxorg - graphics-ddx package version: 6.8.0.5.10.7400, REV=0.2004.12.15
SUNWxorg - graphics-ddx patches applied: 12570-10
SUNWxorg - mesa package version: 6.8.2.5.10.0113, REV=0.2005.08.02
SUNWxorg - mesa patches applied: 125720-10 125724-01

Hi-
This update:
http://support.apple.com/downloads/ATIRadeon_X1900_XT_FirmwareUpdate
Some discussion and feedback:
http://www.xlr8yourmac.com/Graphics/MacX1900XTFirmwareUpdate.html
The only warnings are to follow the installer instructions exactly and don't disturb the machine or the power to the machine during the update.

10.5 Drivers for Ati Radeon 7000 in a g5 xserve

Please help me as i am tearing out whatever hair i have left. I have an apple xserve g5 machine. I am trying to run os x server 10.5.4 leopard on this. The problem i am having is i have put an ATI radeon 7000 pci card into one of the slots but when i plug a monitor into the card on the normal vga port, nothing shows up on the screen. I have talked with the technical department at ATI in the uk and they say i have to go back to apple for a driver for this card to work in this situation because they dont have one but i cant find anywhere where this driver for 10.5.4 would be on the apple website.
Please would someone help me in getting this card or any other card working in this situation as this is very urgent.
Kind regards,
Neil Watson

There are drivers for the ATI Radeon 7000 PCI Mac edition here:
http://ati.amd.com/support/drivers/mac/macosx10-4x-3x-radeon.html
But I'm not sure they're necessary... my server has them built-in:
xlabxs01:/System/Library/Extensions blloyd$ ls ATI*
ATIRadeon.kext:
Contents
ATIRadeon8500.kext:
Contents
ATIRadeon8500DVDDriver.bundle:
Contents
ATIRadeon8500GA.plugin:
Contents
ATIRadeon8500GLDriver.bundle:
Contents
ATIRadeon8500VADriver.bundle:
Contents
ATIRadeon9700.kext:
Contents
ATIRadeon9700DVDDriver.bundle:
Contents
ATIRadeon9700GA.plugin:
Contents
ATIRadeon9700GLDriver.bundle:
Contents
ATIRadeon9700VADriver.bundle:
Contents
ATIRadeonDVDDriver.bundle:
Contents
ATIRadeonGA.plugin:
Contents
ATIRadeonGLDriver.bundle:
Contents
ATIRage128.kext:
Contents
ATIRage128DVDDriver.bundle:
Contents
ATIRage128GA.plugin:
Contents
ATIRage128GLDriver.bundle:
Contents
ATIRagePro.kext:
Contents
ATIRageProGA.plugin:
Contents
xlabxs01:/System/Library/Extensions blloyd$
I don't know... do you have the Mac version of the card, or did you just slap a generic 7000 card in there? If it's not the Mac version of the card, it may not work -- it may expect BIOS and the G5 Xserve has Open Firmware.

Need help with dual monitor setup for KDE 3.5.5.

Here's my hardware:
NEC MultiSync LCD 1530V: 1024x768 (analog)
Samsung SyncMaster 941BW: 1440x900 (digital)
nVidia Dual head AGP video card.
The dual monitor works under dual-boot Windows, boot up and pure Linux console. I've googled around for help, changed my xorg.conf file accordingly to some sites, but it wasn't much help.
Here's my working xorg.conf:
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Device"
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Using this xorg.conf file, only my NEC LCD analog monitor could display KDE while the Samsung digital can't.
Any suggestions?

Thanks for your help guys, I'm halfway there.
The second monitor shows the KDE desktop, but it isn't exactly what I expected. Right now, both monitors display at 1024x768 (each) or 2048x768 (total). The larger monitor stretches and distorts the display of 1024x768 to its natural resolution at 1440x900 and it isn't what I wanted. Other than that, the dual desktop setup behaves what I expected to.
Here's a snippet of my xorg.conf that currently works:
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "Samsung SyncMaster"
HorizSync 31.5 - 60
VertRefresh 60.0 - 70.0
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
Option "TwinView" "true"
Option "TwinViewOrientation" "LeftOf"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
# Option "MetaModes" "1440x900, 1440x900; 1024x768, 1024x768"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 2"
Device "NVIDIA GeForce"
Monitor "Samsung SyncMaster"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1440x900"
EndSubSection
EndSection
Anyone have an idea?
EDIT: Oh snaps. I just did a pacman -Syu and it upgraded Arch Linux to 0.8 and the 2nd monitor stopped working.

Dual Monitor setup for Mac Mini???

I just bought a VGA Y-cable and split my monitor signal to two monitors. Unfortunatley the same thing is displayed on both screens where as I was looking for an extension to my desktop.
I found this http://www.national-tech.com/catalog/dvisplitter.htm (the top one for $ 146)
I was wondering if I split the signal with a dvi splitter rather than a vga splitter if i could have a dual monitor setup with more screen space...
Thanks,
Paulie
Mac Mini Mac OS X (10.3.9)

This will do it for you: http://shopmatrox.com/usa/products/datasheet.asp?ID=788
ibook g4, mac mini core solo, powermac g4 gigabit ethernet Mac OS X (10.4.5)

Reviews for ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro?

There's no review at the Apple Store on this [ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro (Early 2009 or Early 2008)|http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=NDE4NDMx OA]. Googled and found nothing related to the Mac kit. Mostly PC based.
Should I consider this card? I need a spare/replacement graphics card for my Mac Pro (early 2008). The NVIDIA GeForce 8800 GT card has failed me twice.

Just came out on barefeats:
http://www.barefeats.com/nehal14.html
Shows new drivers with 285, also compares 4870.
If you play a lot of games on the windows side, you might also want to consider the 4890. I has recently became flashable (if you're into that kinda thing). It has a lot more leeway to be overclocked. Close to (or if your lucky) hitting the 1 Ghz core clock speed, gives very close comp to the 285, and at fraction of the price. You can get an XFX 4890 on newegg for $195.

Replacement power cable for ATI Radeon 5770?

I'm shopping around for a replacement graphics card for my Mac Pro and I've found several Radeon 5770s that don't have the PCIe power cable included.
Does anyone know what sort of cable they use and if replacements can be purchased?

yes it can be purchased but first, you are shopping for an Apple version, right?
http://store.apple.com/us/product/MC742ZM/A
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M/
http://eshop.macsales.com/item/Apple/6615718/
OWC shows the cable, they also sell separately (maybe why they charge more?)
Amazon had customer photos but not showing one.
I was under the impression that Apple would/was including the cable.

Dual monitor connection for ATI Radeon 4350

Similar Messages

Maybe you are looking for