Dual monitor setup with seperate resolutions

hey guys!
i currentley run thye latest version of archlinux with the cinnamon desktop environment and an nvidia geforce 7300SE graphics card.
im running a dual monitor setup with one 27" 1920x1080 monitor and one 27" 1024X768 monitor
because they have the same physical size they line up perfectley but because the resolution is different programs/mouse cursor movement doesnt, is there any way (without changing the resolutions) to compensate this effect so that in the eyes of linux/cinnamon the monitors line up so that for example dragging a window goes seamlessley between the 2 monitors.
i HAVE found out the panning option in the nvidia x server settings, but that really isnt what i am looking for...
Last edited by RikSolo (2014-08-04 11:25:02)

A magnifier following the window down to the pixel, zooming to the exact size of 540 pixels the 384 pixels window could create an illusion of just that. It would be highly impractical however, not mention all the hacking time. Even if you would manage to get two screen with different sized icons, so that they match visually, the windows and fonts resizing on the fly, wmctrl might help with windows alone, no their themes (buttons, borders thickness etc.), you would still be left with a visually differently sized mouse cursor. Technically such a feat should be possible, but who is going to code it? Nvidia?
Last edited by emeres (2014-08-04 18:48:59)

Similar Messages

  • Does LR handle a dual monitor setup with different aspect ratios (16:9 and 16:10)?

    Does LR 5 handle a dual monitor setup with different aspect ratios (16:9 and 16:10)?
    I'm planing to buy a 27" 16:9 monitor and use it as primary together with a 22" 16:10. Does any have any idea?
    Thanks

    Moreover, the two monitors can have completely different characteristics.  As always, you really need to calibrate/profile any monitor (with a hardware tool - Spyder, Colormunki etc).  That's no more important with two monitors, but you see for sure if you don't, as two dissimilar monitors will then probably look different. 

  • Is a dual monitor setup with 2graphic cards possible?

    HI.
    What i want to do is run Archlinux on my Desktop but i dont want to miss my second monitor.
    I could use both monitor on my nvidia graphiccard but i want to use the energy saving features too (wich dont work with 2monitor on one card) therefore my windows setup is big monitor on nvidia and the smaller one on the intel onboard card.
    They both get recognized by lspci but only the onboard cards isy being used (the onboard card is the first card on windows too).
    So is it possible to get it to work? Id really want to use ARchlinux on my Desktop too but i dont want to use it with one screen or without energy saving?
    Working compositing is a must, i want to use gnome3 wich is the only reason to swich to linux for the Desktop (arch is running on the laptop for ages^^) but i dont need to, Win7 is working flawlessly fine and i didnt have to pay for it (msdnaa).
    Thanks in advance!

    hy do you need to clock down your card?
    Most gpu have a function that clocks down the card@idle and or desktop.
    In my case thats down from 850mhz(560ti)to 200mhz while using windows and 50mhz if the gpu load is low.
    Thats about 20watts less then with full clock.
    The problem is, that the gpu wont clock down with 2monitors on it, it stays at 850mhz.
    Theres some driver tweaks for amd cards wich "fix" thatfix this (i believe its intentionl, 2monitors equals more load but its no problem with new cards...
    Thats one reason i use my onboard gpu for the second monitor, it works well with windows and also means that swiching off fullscreen (games) to the desktop works a lot better, the second monitor can play a movie while playing wich doesnt work with one gpu and fullscreen.
    I really dont need that with Linux since i use it for work and multimedia only but the energy saving feature is nice if the pc is on 8hours and more wich is often the case.
    Can you tell which one do you run? I'm going to buy one for dual-monitor setup, and I'm looking for something that will work for shure.
    As said dual monitor on one gpu works, amd can do 3monitors while nvidia can do 2 at once, that means if u intend to use 3monitors some day with ur card u have to buy an amd card.
    i took the nvidia because is can use it to render videos with cuda support (its not working with all tools yet but its getting better and if it works its a lot faster then my cpu rendering).
    PS: Thats one hread about the power saviing with 2monitors:http://forums.nvidia.com/index.php?showtopic=197557
    since my monitors dont share the same resolution it seems that theres no way to make it work .
    Last edited by halfzware (2011-05-12 21:17:41)

  • Mouse pointer is unchangeable at 100% scaling in multi monitor setup with different resolutions

    Hi there, I have been asked by one of the moderators of the Windows 8.1 forums to post this topic here.  You can see the thread relating to this post here
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-tms/cant-change-the-cursor-pointer/ae8ad8a0-3ded-4810-a3be-794f6c4830a4?msgId=2bd7082f-f5d1-4b01-8c70-e0d2a754d66f&page=1<o:p></o:p>
    The problem:  The mouse pointer becomes unchangeable in size, type, trails etc when 100% scaling is used.  As in it reverts to the standard small white non-inverted, no trails,
    no shadow 'pointer', no matter what options you select in the 'Mouse' control panel settings.<o:p></o:p>
    This appears to be a scaling problem with the Windows 8/8.1 display, not an actual mouse problem.  Judging by my own and other peoples experience it seems to happen mainly with multi
    monitor setups where different screen resolutions are used.  The issue occurs typically when 100% scaling for all monitors is used or this option is un-ticked and the 'change the size of all items' is on smallest (equivalent to 100%).  <o:p></o:p>
    If the scaling is set to 150% or greater the issue disappears and the mouse pointer becomes fully functional.  Also bizarrely when the scaling is set to 100% if the screen is recorded
    using a screen capture program, the recording of the screen shows the mouse pointer selected in the mouse options and not the default small white cursor that is present when recording it.  Here is a link to a video where I explain and show the problem
    happening on my system.  http://youtu.be/xs2cxoeaq-A<o:p></o:p>
    I have every update installed without exception, latest drivers etc.  I use a 55" 4k screen with 2x1080p monitors in portrait on either side.  All are connected through 1 Nvidia
    GTX 780 6GB graphics card<o:p></o:p>
    Hope you can help us<o:p></o:p>
    thanks<o:p></o:p>
    Jon M<o:p></o:p>

    Hi Jon,
    I'm looking into this issue but it will take me some time to provide a reply. 
    In the meantime I noticed that you have 3 monitors with 1x 55' and 2x27' - please have a try to only connect 1x27' monitor and see if issue persists.
    Also please try to change the screen resolution to a lower size and see if issue persists. 
    Both suggestions are not solution, I just would like to know if it is related to multiple monitor or screen resolution. 
    If you have any feedback on our support, please send to [email protected]

  • How do I get my Macbook Pro 15" to run dual monitor setup with Dual Link DVI outputs

    I own have two 27" 2560x1440 WQHD LED IPS Computer monitors and have been trying to get them to work with my macbook pro 15" w retina for over a month now. I have purchased multiple products and nothing has worked. The big problem is that the only input that the monitors have is a Dual Link DVI input. The closest that i have gotten to getting them to work was this morning when I bought 2 Mini Display Port to Dual Link DVI Adapters for $99 a peice. Below is a link
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?afid=p219%7CGOUS&cid=AOS-US-KWG-PLA
    Problem is that when I hook them up, I still only get a picture on one of the screens. Also, it requires you to plug into a mini Display port and USB port which takes up all of the space for me to run any othe peripherals. Though it has a built in USB port, when I plug my apple keybaord into it, I get an saying "USB Device Needs power, connect "keyboard Hub" to power or usb port on this mac"
    I have looked everywhere for a docking station that would satisfy my needs, however, it does not exist. I use my macbook as my main office computer and take it home with me every night. I switched from the lenovo thinkpad to the macbook and have been satsified with my decision except for the fact that i cannot connect my monitors to it.
    Please help!

    Yes, that would work, however it would cost me $2000 for the monitors.

  • Dual monitor setup with Docking station and W500 on windows 8

    Hi there
    I have a w500 with ATI Radeon 3650
    Trying hard to have it set up with windows 8 and two monitors with my docking station. It worked with XP, Vista, W7...but no go now.
    Any solutions out there? I don't care about catalyst control center, or which drivers I have to use, just give me back my two monitors connected to a docking station

    I have the same W500 setup and have had no luck finding Windows 8 drivers on Lenovo's site or AMD's. I have a support ticket in to Lenovo to see what they come up with. I have two flat panel monitors that I need to work. According to  MS, Catalyst Control Center has compatibility issues with Win8. It was easy to set up both monitors under Win7 with CCC. I have not been able to set them up using Windows display setting in Control Panel. Does anyone out there know of an app that I can use to replace CCC and run two monitors?
    kb5

  • Power-down dual monitor setup with one button?

    Wondering if it is at all possible to hook up the monitors so I only have to switch off one monitor to switch them both off?
    As well designed as Mac products generally are, placing the soft touch buttons on the side of the monitor is useless in a dual setup.
    Cheers in advance.

    I don't do it in hardware; I use the freeware SleepDisplay. I invoke it through Spotlight:
    spotlight shortcut"sle"Cmd-Return does it in 2 seconds
    For Tiger
    For Leopard

  • In Dual Monitor setup, with Thunderbird not in main monitor, the some dialogs always shows in other monitor

    I have a three monitor set up. I have Thunderbird running in the right monitor. My main monitor is the middle one. Dialogs, such as Spell check, Activity Monitor always show up in the main window (not the one with Thunderbird) in the upper left hand corner.
    It happens on Windows Vista and Windows 7 Professional.
    I have Thunderbird version 24.3.0

    Some dialogs when moved, stay moved. Others do not. The ones that frustrate me are those that are Centered and therefore show up split across my two monitors.

  • Dual monitor setup flashes constantly

    I am trying to set up a dual monitor setup with a Lenovo Thinkcentre Edge computer.  I reset the BIOS to enable multimonitor support and IGD Active Video.  One monitor is plugged into the VGA port.  But when I plug the second monitor into the DVI-D port, both monitors flash constantly and the speakers make the sound of a device being disconnected.  Unplugging the DVI-D monitor stops the problem on the VGA monitor.  I checked the drivers and they are all up to date.  Any ideas?

    Bad cable?
    Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

  • Dual Monitor setup for Mac Mini???

    I just bought a VGA Y-cable and split my monitor signal to two monitors. Unfortunatley the same thing is displayed on both screens where as I was looking for an extension to my desktop.
    I found this http://www.national-tech.com/catalog/dvisplitter.htm (the top one for $ 146)
    I was wondering if I split the signal with a dvi splitter rather than a vga splitter if i could have a dual monitor setup with more screen space...
    Thanks,
    Paulie
    Mac Mini   Mac OS X (10.3.9)  

    This will do it for you: http://shopmatrox.com/usa/products/datasheet.asp?ID=788
    ibook g4, mac mini core solo, powermac g4 gigabit ethernet   Mac OS X (10.4.5)  

  • I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

    I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all?  I read where on a PC they would work together, but on a MAC they do not.
    I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
    When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one.  I did not think there could be a difference.
    Mainly want to use it for CS6 and LR4.
    How to proceed??? 
    I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI.  Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
    Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
    As a last resort I could sell both and get a 5870.  That would work, I'm sure of that, it's just that I wanted the better graphics card.
    Thanks,
    Bill

    The Hatter,
    I am a novice at Mac so I read all I can.  From what I understand the NEC monitors I bought require Display Port for their maximum performance.  The GTX 680 only has DVI outputs.  Difference from what I understand is larger bandwidth with the DP.
    You said I have the 4000 for CUDA.  I am not all that familiar with CUDA and when I do read about it I do not understand it. 
    A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000.  Is the 4000 doing anything with nothing connected?  I read where in a PC system the 2 cards would interact but in a Mac system they do not.
    Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
    So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
    I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are.  I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4.  Those NEC monitors are supposed to be top notch.

  • MSI N560GTX-Ti Hawk PerfCap with Dual Monitor setup

    Hi guys,
    as far as I'm concerned, there shouldn't be a PerfCap when running a setup with two monitors on extend desktop setting, am I right? However, my GTX560-Ti does PerfCap and sometimes even does this while gaming (which is incredibly annoying). The only way to get it to clock up again is to reboot my PC.
    My question is, why is that and how can I get rid of this behavior? I already tried updating the VBIOS but it didn't help.
    Thanks in advance
    Monsterkater

    I'm sorry, I thought "PerfCap" would be a known term.
    As the title states, it's a MSI N560GTX-Ti Hawk. The Card is clocking down, GPU-Z reports "PerfCap Reason: Util" which is, according to Google Search, because it isn't challenged enough. However, when running a dual monitor setup it should (again according to Google Search) always run at the default speeds (950/1050/1900 Core/Memory/Shader). I have updated my signature to show my system details as listed in the Posting Guide.
    The temperatures under load are okay, the highest I have seen was 76°C GPU, 74°C Memory and 69°C VRM (all of them measured with MSI Afterburner). I have tried several drivers including Beta drivers and always checked "perform a clean installation". I also tried updating the VBIOS. I didn't know what else to try because Google Search doesn't yield much results for this.

  • Dual monitor setup MBA 2013

    Hello Everyone,
    This is my first post on the Apple Support Community.
    Nice to meet al of you!
    System information:
    Macbook Air medio 2013
    Model MacBookAir6,2
    Intel Core i7 1,7GHZ
    8GB
    512GB SSD
    I am wondering if it is possible to have a dual monitor setup using the thunderbolt feature daisy-chain.
    The configuration i am looking for is:
    MBA --> Belkin Thunderbolt™ Express Dock (for using gigabit ethernet) --> Dell U2414H --> Dell U2414H
    Specs:
    Belkin Thunderbolt™ Express Dock = http://www.belkin.com/us/p/P-F4U055/
    Dell U2414H = http://accessories.us.dell.com/sna/productdetail.aspx?c=us&cs=04&l=en&sku=860-BB CG
    Do i have a chance this could work?
    I'm looking forward to hearing from you all.
    Thanks!
    Kind regards,
    Njamo187

    Hello,
    I had the same problem with a nVidia GT120 card (2009 Mac Pro standard). OSX wouldn't show the gray screen on the 3090, even when it was connected alone (to the DVI port). Also, the login screen would always revert to the secondary display (connected thru the mini display port to DVI adapter).
    After login, all was well.
    Now I've solved the problem with an nVidia GTX 285 card. The 3090 is connected to the n.1 DVI port and the secondary display (a 1600x1200 Eizo L997) to the n.2 DVI port, and the Mac Pro boots correctly on the 3090 (gray screen and everything, at full 2560x1600 resolution).
    Note that the first time I booted up the Mac after replacing the GT120 with the GTX 285 I had the same problem, and solved it by disconnecting the secondary display and then rebooting with the 3090 alone. Now everything works as it should.
    Dont't know if there is a bug somewhere (EFI, maybe) of if the GT120 and your ATI are simply unable to work at full resolution before OSX desktop loading.

  • Dual-monitor setup + screen rotation

    Hello, I want to use my desktop computer with a dual-monitor setup. I have connected both monitors successfully, but problems arise after this point.
    The first problem is that they both just display the same screen and that xrandr only detects one screen called "Screen 0". I can change the screen resolution with it, so at least it sees things correctly, but I don't know how to extend my screen area to a new desktop. Not sure if this is relevant, but they're both monitors of the same model.
    output of xrandr wrote:[user@archbang ~]$ xrandr
    xrandr: Failed to get size of gamma for output default
    Screen 0: minimum 640 x 480, current 1600 x 1200, maximum 1600 x 1200
    default connected 1600x1200+0+0 0mm x 0mm
       1600x1200       0.0*
       1280x1024       0.0 
       1024x768        0.0 
       800x600         0.0 
       640x480         0.0
    The second problem is that I can't rotate my screen (I want this because it has pivot functionality). I'm using the xf86-video-ati driver.
    output of xrandr -o left wrote:[user@archbang ~]$ xrandr -o left
    X Error of failed request:  BadMatch (invalid parameter attributes)
      Major opcode of failed request:  149 (RANDR)
      Minor opcode of failed request:  2 (RRSetScreenConfig)
      Serial number of failed request:  14
      Current serial number in output stream:  14
    I hope I've provided enough information. Thanks in advance.
    Last edited by Ffeiofewpoj (2012-01-28 08:03:04)

    I meant to post this in the Kernel & Hardware section and I've no clue how it ended up here. Sorry for that. Could someone move it?
    Last edited by Ffeiofewpoj (2012-01-27 13:25:01)

  • Question about dual-monitor setup - advanced dock + PCIe card

    I just got a Z60t at work. I had been using a dual monitor setup, but it doesn't look like my current config is going to fly w/ the new machine. Anyway, here's what I've got:
    Primary monitor: Acer AL2416W (1920x1200 DVI)
    Secondary monitor: Dell 1901FP (1280x1024 VGA)
    I've read that the advanced dock might be able to let me use this setup with the Z60t if i put a PCIe video card in it. So here are my questions:
    1. Will the advanced dock + PCIe video card allow me to run the two monitors listed above (I don't use the laptop screen at all)?
    2. Which PCIe cards are compatible with the advanced dock?
    3. Can I achieve the same resolutions with the advanced dock + PCIe card?
    4. Will I need to split the VGA output, or can i use VGA + DVI like I do now (since the Z60t has no native DVI support)?
    thanks!

    Gary -- don't turn on the OS Display Mirroring.  Turn it off.
    You want Aperture to control how it uses your dual monitors.  (You do not want the OS to determine it.)
    Once you've turned off the OS "Display Mirroring", the set-up I specified above should give you what you want.
    That set-up is:
    "View → Main Viewer → {anything}", and
    "View → Secondary Viewer → Alternate"
    You must have the Viewer active (not the Browser) in order to change the "Secondary Viewer" setting.  If you are in the Browser, activate the Viewer by double-clicking an Image.
    Let me know if that doesn't work.

Maybe you are looking for