Dual monitor stopped working with last update

anyone else? my monitor was working great before the latest thunderbolt update a couple days ago. now it doesn't work at all. using a thunderbolt to dvi adapter.

miss you steve

Similar Messages

Dual MOnitors stopped working with the Windows 8.1 upgrade valentines week 2015

The recent windows 8.1 upgrade during the week of 2/8/2015 broke the ability to duplicate screens on my Envy dv6 and a Hannspree LCD. There is no screen on the Hannspree while it does remain on the dv6. Switch to external screen only and the screen does display on the Hannspree. Switch to extend and the dv6 remained the primary screen, and the Hannspree can only show the screen saver.

Hi @MikeD48
Welcome to the HP Forums!
It is a fantastic place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
Have you done all your Windows updates?
Have you ran the HP Support Assistant to aid with HP updates?
Have you ran the Windows troubleshooter?
Understanding multiple monitors from windows.microsoft.com may also help.
If the above has not helped I would do a Refresh Your PC to Resolve Problems (Windows 8) with the exteranl monitor disconnected.
This returns the notebook back to defaults.
HP & Windows 8.1 Update
Now without reconnecting the external monitor redo your Windows 8.1 update. The above link may assist you with that process.
Please be sure all updates are done before reattempting the update.
Now if you reconnect your external are you able to set it up correctly?
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Flash Stopped working with last update

After my last -Syu flash isn't working in firefox and any site that requires it takes about 10 seconds longer to load. I'm running in arch64 and havn't had a problem before with ndspluginwrapper (or whatever it is called). How do I even start to fix this, I've already reinstalled all related packages.

cu3edweb wrote:If you open firefox from a console and go to a site with flash do you get a error message in the console?
Yes I do:
which: no soundwrapper in (/opt/kde/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin:/opt/java/jre/bin:/opt/qt/bin:/opt/kde/bin)
ERROR: ld.so: object '/opt/kde/$LIB/libartsdsp.so.0' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/opt/kde/$LIB/libartsc.so.0' from LD_PRELOAD cannot be preloaded: ignored.
*** NSPlugin Viewer *** ERROR: /usr/lib/mozilla/plugins/libflashplayer.so: cannot open shared object file: No such file or directory
which: no soundwrapper in (/opt/kde/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin:/opt/java/jre/bin:/opt/qt/bin:/opt/kde/bin)
ERROR: ld.so: object '/opt/kde/$LIB/libartsdsp.so.0' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/opt/kde/$LIB/libartsc.so.0' from LD_PRELOAD cannot be preloaded: ignored.
*** NSPlugin Viewer *** ERROR: /usr/lib/mozilla/plugins/libflashplayer.so: cannot open shared object file: No such file or directory
*** NSPlugin Wrapper *** ERROR: failed to initialize plugin-side RPC client connection
*** NSPlugin Wrapper *** ERROR: NP_Initialize() invoke: Connection was NULL
Hmmm, I'll go ahead and try to figure it out. Thanks for helping.

Can't send "Pages" document out through e-mail. It stopped working with last update to pages. what to do?

When I try to send a document out through my e-mail, it does not open for me to send e-mail. This was never a problem it seems until last Pages update. What do you recommend?

We are not mind readers.
What version of Pages (don't say latest), and version of OS X?

Mountain Lion 1.8.2 update made my dual monitor stop working on Mac Pro mid 2012

Just done Apple's update for Mac OS X Mountain Lion to 1.8.2 and after rebooting my dual monitor stopped working.
If I go on preferences -> Displays it shows me only one of my two monitors, even if I invert the connections the 2nd monitor doesn't shows up and there seems no way to enable it again.
Any suggestion?
P.S. I already tried to set from "Best for display" to "Scaled", but after rebooting Mountain Lion 1.8.2 reset it to "Best for display"

Ok,
did some extra test here, but first of all my configuration:
Mac Pro (Mid 2012) with ATI Radeon HD 5870 1GB.
2 LCD 24" Wide-screen (1st monitor Hyundai W240D and 2nd Monitor HP w2448hc), both LCD worked perfectly until reboot after installing OS X 1.8.2
After reboot only the 1st monitor wored fine, the 2nd not even listed, so tried to invert cable connections on the 2 miniports on the ATI video card, but nothing changed, still only the 1st monitor working.
Did a second test, disconnected the 1st monitor and connected ONLY the 2nd and now the second works fine.
Tried to connect 2nd monitor on a different miniport, and i still works fine.
Updated my MacBook Pro to 1.8.2 (it as an nVidia card) and connected my 2nd monitor to it and everything works fine, both the laptop LCD and my HP LCD are working fine.
So it looks like Apple screwed up the ATI driver on the latest 1.8.2, now only ONE miniport is active.
To all users with the same Mac Pro configuration: hold to update to Mountain Lion 1.8.2 until Apple fix this driver issue.
More info are on the Console output, so will have to contact Apple on-line support to signal this bug.

Second monitor stopped working with MSI Cyclone OC 460GTX 1Gb

Hi everyone!
I recently bought this card and it worked well for about a month. I woke up one morning to see my second monitor having turned black. There appears to be a signal of some sort since I don't get the "no signal/input" message, but there's no response no matter what I try. I went back to the shop and they confirmed the same error which was then believed to be a broken secondary DVI port. They tested a new card and found it to be working, but I got the same black screen when I came home and plugged it in.
I'm using a 24'' BenQ G2400WD and a Samsung SyncMaster 173T. As they worked well together for about a month and did so on my old 9800GT as well I have no reason to expect the actual monitors to be the cause. They both work fine on DVI 1, but none of them do on DVI 2.
I'm currently sitting with my second card and have tried the following things:
- clean install of new drivers
- uninstalling the last windows updates before the second DVI port stopped working (and then doing a clean install of drivers)
- confirmed that both monitors work on the other port
I've talked to the shop again and they told me they got the card I handed in to work by making sure it was properly connected. I've made sure of this myself as well of course, but without any luck. The guys at this place are known for being good at what they do so I have no reason to suspect that they overlooked anything obvious. The fact that they've gotten both cards to work at their place puzzles me a bit.
My current theory is either a bad batch of cards or some sort of windows update breaking dual screen support. I would expect to have heard about it if it was a windows issue, but both cases might be underreported given that most people only use one monitor. I filled in relevant information in my signature to the best of my knowledge. Please let me know if I've missed something and I'll try to figure it out.
Any help appreciated

OK, I will let you know. First update:
Vendor has already given me a RMA number(less than 2 hours). The VGA card should hopefully be in the snail mail process tomorrow.
One weird thing, my RMA was degraded from replace to repair. Not quite sure about that one? Not sure if that means that it will be replaced or sent to MSI from vendor for repair/or vendor will attempt repair? Only time will tell, I guess. The only great thing is that just one of these 4890 Cyclone OC cards beats out a single 3870x2 vga card hands down. And thanks to this forum, I was taking some time to read up on this forum. I must say I am impressed, keep up the good work moderators and MSI. Thanks and will keep you updated. Special thanks to Svet.

External Monitor Stopped Working with OSX but fine with XP

I have a viewsonic Monitor that im connecting to mbp via hdmi-dvi.
It has been working fine for the last 9-10months but has all of a sudden just stopped being detected.
If i Boot up in windows i have no problems as the monitor is detected fine, but with OSX 10.5.8 all i get is the Grey/blue screen change on the mbp when its connected to mbp or when monitor powered on or off.
There is no change to external monitor though.
I have tryed resetting the PRAM
when i go into sys pref/display, it does not detect a second monitor
I have been looking around for a few hrs now with no luck, any help would be great

Have tryed having monitor unpluged for a whole day and that didnt work, cant see any reset button on monitor.
tryed resent PRAM and PMU, tryed booting in safe mode, tryed booting from OSX disc
but didnt quite understand :
"If you see video when started up from disc, you may have corrupted software. You can use the Archive and Install feature of the Mac OS X installer to reinstall. This kind of installation gives you a fresh version of Mac OS X, but you don't lose any data from the computer as your old information is all archived."
it just booted up and asked if i wanted to install another copy of OSX.
only thing i havnt tryed from the above help is the rm command part of the out of range mac mini, and im a little cautions about that
-i can still use it fine via bootcamp, i just have to go into video settings and tell it to use dual monitors, is there anything like that on osx ? only thing i can find is the display button in sys pref and that only gives me the option to detect displays which it dont do very well.
Thanks

My Logitech K750 numeric keypad stopped working after last update-numbers only

After the last Mountain Lion update, the number on my numeric keypad will not function. They work for my login, but then become inactive. I have tested the system with an Apple keypad, same thing! What happened? Is there a keyboard setting that needs to be reset?

Dianefromblaine,
Thank you. My K750 number pad stopped working on my iMac. The keyboard and number pad 'do' work on a different Mac, so I suspect it is some setting on the iMac. I did a Safe Mode start, reset the SMC, and repaired the disk permissions. The dongle was plugged into an USB Hub. It is now plugged into the iMac USB port. The keyboard has a 90% charge, but still does not work. Then suddenly it started working again, but stopped after about one month.
I found your "Accessibility>Mouse and Trackpad" suggestion and deselected "Enable Mouse Keys". My number pad works again.
Thanks.

Ethernet stopped working at last update

Hard-wired ethernet stopped working after the last update.
Wireless works.
I have a trendnet wireless router. When the imac is connected via physical ethernet cable, it can actually ping and http to the trendnet and other machine on the same subnet just fine. However, it can't get beyond that. Looked at routing table and it looks fine.
When i take the same imac, connect via wireless to the same trendnet router, everything works.
Routing table looks identical.
PC's in same line can be hard-wired to the trendnet router and work fine as well.
Checked for more updates and none available.

This is and old problem that as far as I know has not been resolved. You might try a search here to see all the other posts concerning this.
I had a similar problem with my brand-new Mac about a month ago. It worked on my wireless system when I first booted it up and then after I updated it about 20 minutes later, it began to repeatedly drop the Internet connection. After a week of fighting it, I had to switch to Ethernet thus having only my Mac wired while my PCs cruise right along on wireless.
When I first tried the Ethernet hookup, it still dropped a couple of times. It has not done so in the last 2 weeks, knock on wood. However, I am afraid to try wireless again as I may never get Ethernet back. Perhaps, just perhaps, Apple will resolve this in the next update if they even are aware of it.
Sorry for no answer to your problem. I hope someone sooner or later is able to resolve this.

New Dual-Monitor fix work with StageDisplayState.FULL_SCREEN ?

Hi all,
The new fix for flash to allow fullscreen video on dual monitors is a great addon. Is there a way to have this work with the StageDisplayState.FULL_SCREEN command as well? So far its acting as normal. I assume this may be because its not actual video, but an application that im fullscreening.

Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions

Command line option "-save-to-folder" stopped working after last update: Any workaround?

Running FF on Linux, I was using the -save-to-folder option at CLI to write a copy of the webpage to file with JS content rendered. Worked great until the recent update (to v.27.0.1).
Typical format was: firefox url -save-to-folder filename
When things break, the fixes sometimes happen quickly, sometimes not. In the meantime, anyone have a workaround?

[http://ubuntuforums.org/showthread.php?t=2210953&p=12955762#post12955762]?
It will depend if your Linux build was compiled by a third party. Typically if a function like that stops working, uninstalling might be a good option, but maybe not in this case.
The full list are [https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options] is this one custom perhaps?
There is an add on [https://addons.mozilla.org/en-US/firefox/addon/save-file-to/ Save file to] that adds a dialogue, but you may want to stick to linux. There is a customize shortcuts [https://addons.mozilla.org/en-US/firefox/addon/customizable-shortcuts/ add on]
-recording-output may be something you can try. Or make a bug! :-)[bugzilla.mozilla.com]

T510 Mouse and Keyboard stops working with Windows Update - unable to roll back, happened twice

My mouse has been working fine for a while but it stopped working followed by the keyboard, I put it down to a Windows update but because Windows 7 keeps bluescreening on a restore point I couldn't recover. I contacted Lenovo got the rebuild disc for my machine, completely rebuilt it, all working fine, then after 2 days same issue, mouse stopped, keyboard stopped, restore points make no difference. Does anyone know what windows update is causing this and if there is a fix aside from rebuilding, I can't keep doing this and I need to understand the cause really, not had it with a laptop before. Gone back to using my old laptop until I can get it sorted. Does anyone have any ideas?

I installed the latest drivers via windows update and got the touchpad back, rebooted, it went again. Netiher the trackpoint or touchpad work. I then thought rather than focus on drivers check the bios. I disabled the trackpoint in the bios, still neither works, however if I disable the touchpad in the bios and enable the trackpoint, the trackpoint does consistently work. I can't explain why the touchpad worked after a touchpad update but now fails, the ultranav driver is installed but if both are enabled in the bios it say it isn't installed, if the trackpoint is enabled it tells me I need to enable both so it clearly knows it's there. What's curious is that this doesn't happen on the complete clean IBM build. I can't not turn off windows updates, I'm a developer so Ioad the laptops up with a vast variety of software and I need many of the windows update fixes, either way I am surprised they are conflicting with the touchpad so dramatically. I can't see it being a virus I'm using two layers of protection and if I blow the machine away and installed the updates via an .iso image (so it's never connected to anything else), I can replicate the problem. It's feasible it's another piece of software causing the conflict. Any one have any idea what could be going on or seen it before?

Screen sharing stopped working after last update

Hello all,
I have run software update yesterday, and there were about 10 downloads (I run this weekely, so these must have been new ones). The thing is that after installing all the updates, one of the features that I use more frequently, screen sharing, stopped working properly. I have a Mac Book Pro and an I Mac, both running on Snow Leopard, and screen sharing has always worked just fine, but not after the latest update.
I checked passwords and they are all right, and also checked sharing properties and all seems to be fine. I can share files all right, but for screen sharing now is only possible by setting the option "anyone may request permission to control screen" (under sharing>screen sharing>computer settings) to on, and ask for authorization each time I need to share screens, not good, mainly if you have the computers in different rooms.
Finally, I own an Me account, so I tried sharing screen via Back to my Mac, but it didn't work either.
Can anyone help?
Thanks a lot,
Luis

Problem solved!
After working with Apple, I have an answer. It looks like the 10.10.2 update changed your firewall settings. Try this:
System Preferences>Security and Privacy>Firewall Options
Scroll down the list till you find "screensharingd". If it's marked as block in coming connections, change it to allow incoming connections.
Be sure to reboot your computer and you should be good to go!

ITunes stopped working after last update

I got an update for iTunes yesterday. Now when I try to open it I get an error message "iTunes has stopped working" and the program closes. Any clues?

Hi Pam,
Take a look at the article below, it will help you isolate the issue and then provide some suggestions that should resolve it.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
If that doesn't help, just reply with details about what you're seeing.
-Jason

Dual monitor stopped working after Mavericks installed

27-inch Mid 2010 iMac - upgraded to Mavericks, now LG monitor gives "no signal" error message. LG model is 27EA83, connection is via DisplayPort. It worked before (Lion) and also works with MBPro upgraded to Mavericks. The iMac recognizes the monitor but nothing shows up onscreen. Any ideas?

miss you steve

Dual monitor stopped working with last update

Similar Messages

Maybe you are looking for