Dual monitors on nvidia geforce fx 5200

Hi,
I'm using a nvidia geforce fx 5200 card that has vga out, dvi out, and svideo out. I have one crt hooked into the vga, the main monitor, and I have a dvi to vga converter, to enable a second vga, crt monitor. When I try to use the nvidia-settings, and enable twinview,  and I get this message:
"failed to set metamode (1) 'CRT00: nvidia-auto-select @1024x768 + 1024+0, DFP-0: 1024x768 @1024x768 +0+0' (Mode 2048x768, id: 50) on X screen 0."
any ideas? thanks.

Hm, Not working, just display on the true vga monitor. Are you using a dvi to vga connector as well? Heres my log output, I couldn't make too much of it, I tried to switch the CRT-1 to DFP-0 which didn't seem to do the trick either.
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux kenny-desktop 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 8 10:13:45 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 13 13:50:20 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xfd000000/0, 0xe0000000/0, BIOS @ 0x????????/131072
(--) PCI: (0@3:10:0) Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder rev 1, Mem @ 0xf0000000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.12 Thu Jul 17 18:36:35 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 173.14.12 Thu Jul 17 18:15:54 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "MetaModes" "CRT-0: 1024x768 +0+0, CRT-1: 1024x768_85 +1024+0; CRT-0: 800x600 +0+0, CRT-1: NULL; CRT-0: 640x480 +0+0, CRT-1: NULL"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 (NV34) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.34.20.42.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at PCI:1:0:0:
(--) NVIDIA(0): Envision EFT7x0 Series (CRT-0)
(--) NVIDIA(0): DELL D1025HTX (DFP-0)
(--) NVIDIA(0): Envision EFT7x0 Series (CRT-0): 350.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL D1025HTX (DFP-0): 135.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL D1025HTX (DFP-0): Internal Single Link TMDS
(II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
(WW) NVIDIA(0): TwinView requested, but only 1 display devices found.
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): Invalid display device in Mode Description
(WW) NVIDIA(0): "CRT-1:1024x768_85+1024+0"
(WW) NVIDIA(0): Not using mode description "CRT-1:1024x768_85+1024+0"; unable
(WW) NVIDIA(0): to map to display device
(WW) NVIDIA(0): Invalid display device in Mode Description "CRT-1:NULL"
(WW) NVIDIA(0): Not using mode description "CRT-1:NULL"; unable to map to
(WW) NVIDIA(0): display device
(WW) NVIDIA(0): Invalid display device in Mode Description "CRT-1:NULL"
(WW) NVIDIA(0): Not using mode description "CRT-1:NULL"; unable to map to
(WW) NVIDIA(0): display device
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "CRT-0:1024x768+0+0,CRT-1:1024x768_85+1024+0"
(II) NVIDIA(0): "CRT-0:800x600+0+0,CRT-1:NULL"
(II) NVIDIA(0): "CRT-0:640x480+0+0,CRT-1:NULL"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "CRT-0:1024x768+0+0,CRT-1:1024x768_85+1024+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) config/hal: Adding input device Logitech Optical USB Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event2"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
AUDIT: Fri Feb 13 13:52:42 2009: 3113 X: client 17 rejected from local host ( uid=0 gid=0 pid=3481 )

Similar Messages

  • PowerPC G5, NVIDIA GeForce FX 5200, problems with monitor

    I have 1.6GHz PowerPC G5 (M9020LL/A) with NVIDIA GeForce FX 5200 & HP LP1965 monitor. Monitor does not wake up after going to sleep using system preferences or being turned off using the button. All I get is light blue screen changing to black and so on and on. Anyone? Thx a lot!

    Thx for tips. Booting OK in Safe, reaching Desktop.
    1. While in Safe, if both G5 & HP are on "never turn off" I get some dark grey screen after couple of minutes and I can "wake" G5 with mouse/keyboard. If I turn off HP on a button, nothing helps.
    2. Still in Safe: as soon as I set G5 to sleep after x mins an HP loses signal, nothing helps. I can wake G5 from keyboard, coming to light blue pic and thats it.
    3. Rebooting - nothing helps. As soon as I cut the power to monitor or it goes to sleep, same thing happens. Black screen turning to light blue and so on. I have tried to press Power on G5, put it to sleep, than wake it by pressing Power again. I am stuck on a light blue screen for a minute, then all of a sudden I get the signal back.
    Only thing that "works" is to have Screen saver on x mins and Monitor on "Never".

  • A G5's NVidia GeForce FX 5200 Ultra 64mb in a Dual G4 1.25

    Hi i have an NVidia GeForce FX 5200 Ultra 64mb that is my back up card to my G5's NVidia GeForce 6800 GT 256mb, as it's not being used and as i got my lad a Dual G4 1.25 i was wondering will the FX 5200 work in the G4, as it's card though 64mb is Core Image: software and the FX 5200 is hardware.
    Thanks for your advice guys.

    Hi-
    Exactly right- just tape the pins as per this article, and install.
    All good!

  • Will my NVIDIA GeForce FX 5200 Ultra graphics card drive a 30" display?

    I have a NVIDIA GeForce FX 5200 Ultra in my G5 that I purchased 3 years ago. A colleague is selling his 30" monitor (about 2 years old) and I wanted to see if this card would let me use the monitor to it's fullest.
    Will my current graphics card handle it?
    Thanks ...
    Processor 065-4931 2.0GHz PowerPC G5
    Memory 065-4976 1GB MB DDR400 (PC3200)-2X512
    Hard Drive 065-4982 250GB Serial ATA-7200rpm
    Optical Drive 065-4928 8x Super Drive (DVD-R/CD-RW)
    Graphic Support 065-4929 NVIDIA GeForce FX 5200 Ultra

    You will need a new graphics card with dual-link DVI.
    Starting with the fastest:
    ATI Radeon X800 XT 256MB (ADC, dual-link DVI)
    <http://www.welovemacs.com/0831xeghr.html>
    NVIDIA GeForce 6800 Ultra 256 MB (Two dual-link DVI)
    <http://www.welovemacs.com/6613332.html>
    NVIDIA GeForce 6800 GT 256 MB (Two dual-link DVI)
    <http://www.welovemacs.com/6613441.html>
    ATI Radeon® 9600 Pro PC & MAC Edition RoHS 256MB AGP (Single-link, dual-link DVI)
    <http://shop.ati.com/product.asp?sku=3170809>

  • NVIDIA GeForce FX 5200 with Apple 23" Cinema Display?

    Hi,
    I would like to know if my graphic card in my Sony Vaio PC is compatible with a 23" Apple display ? I would like to run a splitter with one feed going to my Mac Pro and the other to my PC utilizing the same Apple LCD monitor.
    I have a NVIDIA GeForce FX 5200 with 128Mb, this card has a PCI connection,but I am not sure if my card could support the Apple 23" Cinema Display that I recently purchased to replace the 19" Envison LCD that I'm currently using ?
    Does anyone have an idea ?
    Is there a list somewhere giving compatble graphic card ?
    The nvidia site does not say a word about cinema display !
    Thanks in advance
    Regards,
    John
    Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.7) Sony Vaio Desktop PC, G-Drive External HD,Toshiba Satellite Pro Notebook

    Apple doesn't make compatibility information known
    for non-Apple systems.
    But yes, they do.
    Here is the list of tested video cards for the ACDs:
    http://docs.info.apple.com/article.html?artnum=301066
    I highly recommend the Quadro cards; they are fantastic.
    nansaidh
    Dell   Windows XP Pro   23" Cinema Display

  • Fade-off with MSI T-128 (nVidia geForce FX 5200) PCI card

    Hi
    I'm totally fade-off with nVidia GeForce FX 5200 (MSI -T128) graphics PCI card. I've tried all options found on different forums and also with latest driver for the card both from MSI and nVidia. But non of these are able to solve my problem.
    Even though, I have installed the latest driver for the card form nVidia or MSI, my system gives BSOD (infinite loop) on XP and system hang on Ubuntu/Linux. Request you to please help me out for this problem. Its dam sure something wrong in the card driver or BIOS settings as its occurring with any OS.
    This is my last ray of hope, with a expection that some MSI people will help me out, else I'll have to throw the f**king card to bin. Sorry being unprofessional, but it seems that I have wasted my money banking on the brand MSI/nVidia.
    PC Configuration:
    1. Asus K8N motherboard (nVidia chipset, NO on-board graphics)
    2. MSI T-128 (nVidia GeForce FX 5200) PCI graphics card
    3. Windows XP SP3/ Ubuntu 9.04
    4. 512 MB DDR1 RAM
    5. 320GB, 7200 rpm Seagate ATA HDD
    6. AMD Athlon XP 2800+
    Again request the nVidia people plz plz plz .. help me.
    Note that, When I'm booting with safe mode in XP, the PC DOES NOT hangs.
    Thank you in advance.

    Its followed by "Sorry being unprofessional". But when my hard earning money draining, its obvious. Anyway, Do you have answer to my request ? Or only guiding me for proper language ? If you have ans plz give me too.
    Quote
    Is it AGP card? Which one?
    Do not you know MSI T-128 is which one, Mr Moderator ?
    Quote
    Os running?
    Windows XP SP3/ Ubuntu 9.04
    Quote
    Have you tested the VGA in another machine?
    After a couple of years savings, I got this PC and you are asking for another PC ? I'm not rich like you.
    Hope you have NOT read my post completely and replied, Mr moderator.

  • Can I run CC on Intel Pentium G2030 3.00GHz dual core. NVIDIA Geforce GT610 1GB graphics. Viglen Vig642M Motherboard?

    Can I run CC on Intel Pentium G2030 3.00GHz dual core. NVIDIA Geforce GT610 1GB graphics. Viglen Vig642M Motherboard?
    I also have 8GB RAM DDR3, 1TB HDD, Its on Windows 7, is that a problem with the allocated graphics card?
    P

    Thanks John,
    I've done this, but couldn't gather clear information about whether the graphics card was suitable for Premiere CC? Using CPUbenchmark it seemed to me like it would be suitable. Its unlikely we would use After Effects CC but would be handy if it would work.
    Also the G2030 dual core? Can you recommend how I find out if this would work, as the site states the requirement to be a Dual Core2... does this mean the software (Premiere CC, Photoshop CC, Indesign CC etc) would not work at all?
    Any guidance helpful.
    P

  • NVIDIA GeForce FX 5200 compatible with 23" display ?

    Hi,
    I would like to know if my graphic card is compatible with a 23" apple display ?
    I have a NVIDIA GeForce FX 5200 with 128Mo, this card has a PCI connexion,
    but I am not sure if my card could support a cinema display at 1900x1200 ?
    Does anyone have an idea ?
    Is there a list somewhere giving compatble graphic card ?
    The nvidia site does not say a word about cinema display !
    Thanks for the answers,
    Ben
    no Mac .. V. sad indeed ! Other OS linux and xp user

    Apple doesn't make compatibility information known
    for non-Apple systems.
    But yes, they do.
    Here is the list of tested video cards for the ACDs:
    http://docs.info.apple.com/article.html?artnum=301066
    I highly recommend the Quadro cards; they are fantastic.
    nansaidh
    Dell   Windows XP Pro   23" Cinema Display

  • Can I run two 1920x1200 monitors off NVIDIA GeForce 7300 GT?

    Hi.
    I have a Mac Pro 2006-2008 fitted with a NVIDIA GeForce 7300 GT 256MB, it has two DVI outputs.
    I'd like to attach to it two Dell U2410, 24" 1920x1200, but can't find final proof that the card will support extended desktop on two such screens.
    Thanks!

    Hi-
    Welcome to Discussions!
    Yes, the 7300 GT will support two displays at 1920 x 1200.
    It has one single link DVI and one dual link DVI
    Support for digital resolutions up to 1920 by 1200 pixels; dual-link DVI ports support up to 2560 by 1600 pixels
    Extended desktop is supported with all OEM cards.
    Dual-display support for extended desktop and video mirroring modes
    http://support.apple.com/kb/SP30

  • Dual 23'' with NVIDIA GeForce 7300 GT

    I want to know if I can drive 2 23" inch displays on a Mac Pro 8 core with the stock NVIDIA GeForce 7300 GT at full resolution or do I need to get a second card. My monitors are not the new ones with the aluminum finish, they are a generation or two behind, they are the ones that have the white plastic frame.
    Thanks

    The card can drive two monitors. Only one can be 30". The two 23" will be fine, but you will need two DVI to ADC adapters if they are ADC (Apple Display Connector) models.
    <http://www.ramelectronics.net/assets/images/DVI/adcmale.jpeg>
    <http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>

  • Tecra S2 - resolution for external monitor on NVIDIA GeForce Go 6600

    Hello! I'm new here ...
    I have a Tecra S2 with Windows XP SP2 and graphic card NVIDIA GeForce Go 6600. Internal resolution (display of notebook) is 1024 x 768. Its work fine. But I work with an external monitor VGA with "DualView" function. It is a Samsung Syncmaster 940N.
    It??s all OK (19", resolution 1280 x 1024), with my new monitor Samsng Syncmaster 203B don't work: The external monitor's native resolution is 1400x1050 but the maximal resolution available is 1280 x 1024. And so, using 1280x1024 resolution, will cause the image on the external monitor and text is not clear.
    I cannot set the 1400 x 1050 resolution via Control Panel nor via NVIDIA -menu.
    Graphic card drivers are updated to the last version on the Toshiba site. Graphic card NVIDIA GeForce Go 6600 is supported from my monitor Syncmaster 203B.
    Max. resolution for external video of NVIDIA GeForce Go 6600 is higher as 1400 x 1050.
    I need to use this new monitor, can you help me?
    Many thanks in advance!

    Unfortunately the Tecra S2 isn't capable to display the resolution 1400x1050.
    Here are the resolutions you can use.
    Support Resolution/Color(CRT)
    640x480 16bit/32bit colors(Depending on CRT)
    800x600 16bit/32bit colors(Depending on CRT)
    1024x768 16bit/32bit colors(Depending on CRT)
    1280x1024 16bit/32bit colors(Depending on CRT)
    1400x1050 N/A
    1600x1200 16bit/32bit colors(Depending on CRT)
    1920x1440 16bit/32bit colors(Depending on CRT)
    2048x1536 16bit/32bit colors(Depending on CRT)
    May you find an enhanced but not official driver here: http://www.laptopvideo2go.com/enhancer

  • Is Nvidia GeForce FX 5200 adequate?

    Before I break the seal and open the box, a question:
    The system requirements listed on the Aperture materials list several nvidia GeForce graphics cards, but not the 5200 card I have installed in my G5. Will aperture operate with the 5200 card? Or should I abandon my plan to use the program and return it unopened to the retailer?

    Supported? No.
    Can be made to work? Yes.
    Do a Google. You can modify a part of the Aperture executable to remove the limitation that stops you using the FX5200. You will have to do it after each update.
    Adequate? Depends on your patience.
    Its very slightly buggy in that the loupe doesnt always completely fill, though that seems far better under 1.1.2.
    Its not especially fast and your milage will depend on what camera you use it with. I have a D70 and mainly use for sorts/selects with up to 500 photos in a project folder and for my usage, it works fine.
    The thumbnail browser works fine and a pic will 'load' to full rez in 4-5 secs (if not already cached) on my G5 Powermac 1.8 single.

  • Nvidia GeForce4 Titanium vs. nVidia GeForce FX 5200

    I purchased a new dual G5 with an nVidia GeForce FX5200 with 64MB of VRAM. I had in my old G4 a Nvidia GeForce4 Titanium card with 128MB of VRAM. First, can I install the old Titanium card in my G5? If so, is it a better card than the card that the G5 has now? Any suggestions will be deeply appreciated.

    The card in the G5 is compatible with the new Tiger Core Image, the one in your G4 is not.

  • DDR NVidia GeForce FX 5200 graphicis card & 30" Mac HD monitor

    I am a new Mac user, having had Dell desktops all my life. Recently, my Dell W1700 monitor/tv crapped out, and (of course) it is just out of warranty.
    This prompted me to by a Mac Book Pro with a 30" HD monitor (to work with the PC also).
    MY QUESTION:
    Like many in here, I want to use the Mac HD monitor with the Mac Book Pro as well as the Dell PC (8300 series). I suspect that the cable connections may not be compatible (pins appear to have a different configuration) though the Dell LCD TV/monitor did use DVI cable in conjunction with a separate green audio cable.
    I've already read and reviewed how to set up the laptop with the lid closed while utilizing the HD monitor. Now I need to troubleshoot the HD/PC connections.
    Help!
    PS-is the spell check feature in this forum messed up or what? I've never had so many idiotic "suggestions".

    Hi-
    Welcome to Discussions!
    The 30" Apple Cinema Display requires a computer with a dual link DVI equipped graphics card. It can connect to single link DVI, but without a dual link, the 30" ACD will not operate at optimal resolution (2550x1600). The 30" ACD is equipped with a dual link DVI-D connector.
    I believe your 5200 has a single link DVI-I (2048x1536 max resolution), which will allow coupling with a DVI-I or DVI-D connector.
    30" ACD supported resolutions:
    2560 x 1600 pixels (optimum resolution)
    2048 x 1280
    1920 x 1200
    1280 x 800
    1024 x 640

  • PowerMac G5 DP 1.8GHz/GeForce FX 5200 - DELL 2407WFP 24" LCD compatibility?

    Hi all,
    I am running Mac OS 10.3.9 (up-to-date) and would like to ask if there's anyone using and/or knowing about the following compatibility:
    PowerMac G5 dual processor 1.8GHz with NVIDIA GeForce FX 5200 (64MB VRAM)
    and
    DELL UltraSharp 2407WFP 24-inch Widescreen Flat panel LCD Monitor
    I have the PDF spec sheet for this DELL monitor, but unfortunately couldn't find accurate info about this particular and possible scenario.
    Related info:
    Size (Viewable Image Screen): 24 inches (24-inch viewable image size)
    Optimal Resolution: 1920 x 1200 at 60Hz
    Connector Type: Analog, DVI-D (Digital) with HDCP
    Other Connectors/Features: S-Video, Composite, Component, Integrated 9-in-2 media card reader/slots, Universal Serial Bus (USB) 2.0 Ports, Kensington security port
    Hope that someone can help. I am currently testing a DELL UltraSharp 2007WFP 20-inch Widescreen Flat Panel LCD Monitor and it works flawlessly, but I am interested in paying a little bit more and buy the 24".
    Thank you all in advance,
    Power Mac G4 Cube DP 1.7GHz (+ base panaflo fan)   Mac OS X (10.3.9)  

    Mike: thanks for posting!
    As far as I understand, DELL LCD monitors and Apple PowerMac computers (with their standard 64MB graphic cards) don't have any compatibility issues, though none of the forums/threads/movies you point are 2407WFP related.
    Meanwhile, I have emailed DELL and trusting their reply, they assure all of their current line LCD monitors use the latest revision, probably REV A03, as described in this recent Apple discussion:
    http://discussions.apple.com/thread.jspa?messageID=3541462&#3541462
    I will definitely give the DELL UltraSharp 2407WFP 24-inch Widescreen Flat panel LCD Monitor a try and will return to this thread with some conclusive feedback.
    Again, thank you for taking your time reading/guiding me.
    JM
    Power Mac G4 Cube DP 1.7GHz + 7V zalman base fan   Mac OS X (10.4.8)  

Maybe you are looking for