Dual Monitors with GPU and Motherboard not working

Hey guys, just wondering if anyone else could help me out.
So, I decided to hook up an old monitor of mine to my rig today and, lo and behold, the monitor isn't being detected by my computer.
I've already got a monitor running through my GPU (NVidia GTX 960) via DVI.
Currently tried connecting my second (old) monitor to my motherboard with DVI as well, but it isn't being detected.
I went into my bios and forced my integrated graphics on, but when I checked in the device manager, it said my VGA graphics adapter "Cannot start (Error Code 10)"
Also tried updating VGA graphics adapter drivers, but I had the latest drivers already.
I'm not sure if that's related to the issue, but I thought it'd be worth mentioning.
(What's also worth mentioning is that I'm a complete casual when it comes to computer building and such, lol)
Motherboard is a Gigabyte F2A88XM-HD3, supports VGA, DVI and HDMI.
Monitor that I'm trying to connect supports both DVI and VGA.

A lot of the 960's don't have 2 DVI's. However most have an additional HDMI and DisplayPort. I recommend you get an adapter from amazon or something. Just make sure that it will convert HDMI or DP to DVI. Usually amazon products have a good amount
of questions already answered by buyers.
Interesting that they'd go that route, I guess I just assumed since my 760 has two.
I've set up dual monitors using one DVI and one HDMI before, but I ran into issues with screen sizing. Despite having two identical monitors set at the same resolution the mouse would not transmit over to the second monitor at the same height as it was on
the first, so I had to buy an adapter like Joshua suggested.

Similar Messages

Dual-head with Radeon HD 2400LE not working/behaving strangely

I have a Radeon HD 2400LE video card. and I'm attempting to set up dual-head with a 17" (1280x1024) scree and a 24" (1920x1200) screen. I originally tried fglrx, and it worked mostly, but caused partial lockups every few hours (the mouse cursor would move, but didn't seem to pass any events to anything - even hover wouldn't work). I'd like to use the radeonhd driver in any case, and I'm currently trying it from git/AUR, version 20090116-1. I'll post my xorg.conf here shortly, once I've cleaned it up a bit. Anyhow, I'm running KDE 4.2, and the display settings list VGA (my second monitor), DVI-digital (my first monitor), DVI-analog (the same port), and TV (S-Video - not used). However, clicking "Identify Outputs" displays the VGA output properly, but the DVI-digital output indicator is shown halfway off the top-left corner of the VGA-connected screen. Enabling the DVI monitor's output does something, because the monitor recognizes that it's connected, but it won't display anything, and changing the DVI settings causes various weird issues with the VGA-connected screen. I'm not using Xinerama, as I was planning on doing the whole thing with KDE and the help of XRandR. I could really use some help with this, as I've been fighting with dual-head all week.
Thanks

Here is my xorg.conf, it sounds like you are trying to acheive a similar setup to what I have, maybe you'll find this helpful
let me know if you have anyquestions on it.
Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-DGA"
EndSubSection
Load "glx"
Load "freetype"
#Load "type1"
Load "dri"
Load "drm"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Server Flags"
Option "AutoAddDevices" "false"
EndSection
Section "Input Device"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "microsoft"
Option "XkbLayout" "us"
EndSection
Section "Input Device"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons"
EndSection
Section "Monitor"
Identifier "monitor0"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "monitor1"
Option "DPMS" "true"
Option "RightOf" "monitor0"
EndSection
Section "Device"
Identifier "device0"
Driver "radeonhd"
BusID "PCI:1:5:0"
Option "monitor-DVI-D_1" "monitor0"
Option "monitor-VGA_1" "monitor1"
Option "RROutputOrder" "DVI-D_1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "device0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Multihead Layout"
Screen "Screen0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Last edited by Cyrusm (2009-01-25 04:34:14)

2015 HP Envy 23 Ips monitor with Beats Audio is not working after upgrading to Windows 10

Hi I have upgraded OS to Windows 10 recently. from then there is no sound from my monitor. FYI.. am ussing a Dell laptop to connect to the monitor witha HDMI cable. It was working fine before upgrade and suddenly it stoped working after the OS upgrade.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your notebook computer's monitor will not produce any sound after upgrading to Windows 10, and I would be happy to assist you in this matter! According to the available list of supported drivers for your monitor, there is currently no Windows 10 software published at the moment. In the meantime, I recommend following the steps in this document on HP Products - Where do I find Windows 10 drivers and software for my model? I also suggest connecting the monitor on a different computer to test the hardware functionality of the speakers. I hope this helps! Best Regards

Drilldown with ParentAfter and ParentBefore not working

Hi All,
I am using Drilldown option in Workbook Option with ParentAfter and ParentBefore. I found that the drilldown sometimes works but sometimes can not expand/collapse. First, i thought it was because of dimension member set in the current view is not base member, but now that i have already set all as base, the drilldown still can not work.
I have set the memberset as LDEP and taken out the sort range. And now, after logged off and on again, the drilldown can work again without me changing anything....
Any idea why it behaves this way?
Thanks in advance for the advice.
Ce Wie
Edited by: Go Ce Wie on May 22, 2009 3:20 PM

Your issue lies in your clientkeys. instead of:
clientkeys =
awful.key({modkey,}, "f", function(c) c.fullscreen = not c.fullscreen end),
awful.key({modkey, "Shift"}, "c", function(c) c:kill() end),
awful.key({modkey, "Control"}, "space", awful.client.floating.toggle),
awful.key({modkey, "Control"}, "Return",
function(c) c:swap(awful.client.getmaster()) end),
awful.key({modkey,}, "o", awful.client.movetoscreen),
awful.key({modkey, "Shift"}, "r", function(c) c:redraw() end),
awful.key({modkey}, "t", awful.client.togglemarked),
awful.key({modkey,}, "m",
function(c)
c.maximized_horizontal = not c.maximized_horizontal
c.maximized_vertical = not c.maximized_vertical
end),
It should be
clientkeys = awful.util.table.join(
awful.key({modkey,}, "f", function(c) c.fullscreen = not c.fullscreen end),
awful.key({modkey, "Shift"}, "c", function(c) c:kill() end),
awful.key({modkey, "Control"}, "space", awful.client.floating.toggle),
awful.key({modkey, "Control"}, "Return",
function(c) c:swap(awful.client.getmaster()) end),
awful.key({modkey,}, "o", awful.client.movetoscreen),
awful.key({modkey, "Shift"}, "r", function(c) c:redraw() end),
awful.key({modkey}, "t", awful.client.togglemarked),
awful.key({modkey,}, "m",
function(c)
c.maximized_horizontal = not c.maximized_horizontal
c.maximized_vertical = not c.maximized_vertical
end)
I had the same problem and this fixed it.

Dual monitors with Win 7 - doesn't work

I have multiple monitors (3) and have been using FF 3+. When I upgraded it won't display right (flickers, black screen until I mouse over, etc.).
I tried to regress but I cannot go back to v.3+ It only shows FF4 as being available, even after deleting the product.
Unfortunately, I had to stoop to using IE (shudder!).
I'm running Win7 (64-bit), 4 Gig RAM, NVIDEA GeForce video cards, 2 - 19" and one 24" monitors.
This setup worked fine with previous version of FF. Please help me get off IE!

Windows7 Recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867418&tmp_task=solveCategory&cc=us&dlc=en&lc...
If you didn't do so and now can't> create Recovery Disks you can order from HP for a small fee. You will need serial number to order> Guide to Finding System Info
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Dynamic vlan assignment with 1242AG and IAS not working

I'm having trouble getting the dynamic vlan assignment to work on my 1242AG Cisco Aironet APs. I've seen multiple cases with a similar setup and configuration where it works just fine. I've tried everything I can think of. Any suggestions?
IAS and AD is running on Windows Server 2003
Everything works fine except the vlan assignment. Wireless clients successfully authenticate through IAS and Active Directory, but instead of being switched to the appropriate vlan the client stays in whichever vlan/ssid it originally connected to.
PEAP is the authentication method, using MS-CHAP v2. Naturally I have the attributes in the policy set appropriately, ie:
Tunnel-Medium-Type > 802
Tunnel-Pvt-Group-ID > vlanid
Tunnel-Type > VLAN
On the AP:
Cisco 1242AG, C1240 Software (C1240-K9W7-M), Version 12.4(3g)JA, RELEASE SOFTWARE (fc2)
I've attached the config for the AP, which shows that I have two vlans/SSIDs set to cipher, aes, network eap, wpa, etc. I noticed that if the
Tunnel-Pvt-Group-ID attribute is set to a vlan id that doesn't exist on the AP then the AP makes an event log saying so.

Good! Well to answer your questions, IAS is sending numbers, i.e. Tunnel-Pvt-Group-ID > 129
I did view the debug from an AP which showed the Tunnel attributes being recieved from the radius server (I'll have to wait until Monday to get a copy though).
I see I don't have that line "aaa authorization network default group rad_eap",
So I'll have give it a try, (maybe I can remote in so I don't have to wait until Monday).
Thanks,
Jason

Keyword filtering with 'all' and 'any' not working

Hi folks,
At the moment I'm testdriving Aperture 1.5.3, and it seems that when filtering on multiple keywords the logical connection 'any' or 'all' doesn't work.
For instance, the filtersetting is 'Match all of the following:'
[checked] Yosamite Sam
[checked] Bugs Bunny
[unchecked] Daffy Duck
This would mean I should see all pictures tagged with both the keywords 'Yosamite Sam' AND 'Bugs Bunny'. In stead of that, the result of the filter is all pictures tagged with 'Yosamite Sam' OR 'Bugs Bunny' OR both.
Is this a known issue and is already a fix for this?
Greetz,
Seeta

I had the same problem when I started using Aperture. The 'Match all/any of the following' is referred to the different searching options (by date, by keyword, by rating...)
If you need to search for images with all or any of the keywords ticked use the 'contain one or more of the following' or 'contain all of the following' beside the keyword title on the searching window.

I have macair bought 2009. Bluetooth connect with mouse and keypad not working. It used to work. Batteries are good. Green light flashes on each device, but no connection. Any suggestions to help me here? Thanks.

Dear Community,
I have a macbook air bought new in 2009. Since 2011 I only use it occasionally as I now mainly use my iMac. The mouse and keyboard that came with the macbook air used to work fine with bluetooth connection to the macbookair, but now they don't. The batteries are good. The green light flashes showing it is seeking other bluetooth device to connect to. But they wont connect to my macbookair. What could the problem be? Your help would be much appreciated.

Thanks for that. Yes I checked that already and BT enabled. Yes, external keyboard. But I just moved the computer to different part of room and bingo the devices paired and connected. So problem now solved. Thanks for offering your help.

Backing up system with Recovery and Repair not working

I have a Lenovo 3000 N500 4233-52u and I am trying to create a back-up with R & R. When I click on Back-Up Now nothing happens. Also, I can't find where to set the schedule for back-ups.
Do I have to re-install R & R ? If so which version should I install.
Thanks in advance for your help.
Bill

Kate,
Are these purchases not in your iTunes library? Content such as music, movies, apps, etc. are not included in the backup of your iPod. These all need to be transferred to your iTunes library seperately by choosing File -> Transfer Purchases with your iPod Touch still connected.
See this article about redownloading your missing purchases.
http://support.apple.com/kb/ht2519
B-rock

Home sharing with IMac and applet not working

Sharing is turned on my IMac. My Apple TV is on and can see the name of the IMac. The iMac has photos selected but they don,t display on the Tv. I have verified the IMac has most recent version of ITunes. Been through TS guide, no luck. Apple TV says to turn home sharing on but it is already on. Any suggestions.

I have 2 Apple TV 2s. I updated one to the latest iOS and it immediately lost the connection to my home shared iMac. A week later I updated the second ATV2 and it immediately lost the connection, BUT I regained the connection with the first ATV2 I had updated earlier. The second still won't connect even after exhausting EVERY solution numerous times and the setting on both ATV2s are identical. Hoping the next iOS ATV update solves the problem.

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

Since I downloaded the upgraded software, my charger that came with my phone says "this cable or accessory is not certified and may not work reliably with this iphone" It worked before but now it doesn't...I don't think I should have to buy a new one...

since I upgraded to the new operating system my charger no longer works...
It says"this cable or accessory is not certified and may not work reliably with this iPhone"

Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here.

HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.

Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario

My sons ipod classic was left on all day and now has a red circle with a cross in it and will not work

my sons ipod classic was left on all day and now has a red circle with a cross in it and will not work - nothing we do will make it work - any ideas??

Try to restore the iPod. Here's an article that provides troubleshooting for it.
http://support.apple.com/kb/TS1463
If that doesn't work visit an Apple Store and see if they can replace it.

Dual Monitors with GPU and Motherboard not working

Similar Messages

Maybe you are looking for